LiveCycle/Acrobat Application Error

Hi,
Just installed Acrobat 8 Pro with LiveCycle Designer 8.0
version 8.05.2073.1.374024
I've constructed a simple one-page form. It has some text fields, some check boxes, one drop-down list, and three Date/Time fields.
When I go to the Preview PDF tab, everything goes fine until I try either the Drop-down List or one of the Date/Time fields. Then, I get a Windows error message:
Adobe Acrobat: Acrobat.exe - Application Error
The instruction at "0x2981d30b" referenced memory at "0x00008006". The memory could not be read.
Interestingly, if I publish the form and open it in Acrobat, and then try to set the Reader rights so that users can save the filled-in form, I get the same crash and error message.
Background:
OS: Windows XP Pro
The installer file I downloaded from the Adobe LWS site would not run. Our corporate IT provided an installer that did.
Conclusion: Help? Any suggestions would be appreciated. Thanks.

Dave, I have a similar problem and cannot find a solution. I have noticed nobody seems to want to answer this issue, althoiugh it's in many forums.
Have you found a solution? Do you care to share?
One of the errors was related to my Office XP shared service (the user input text and speech extensions). I have turned that off.
The specific messages are:
"FormDesigner.exe - Application Error", "The instruction at '0x00XXXXXX' referenced memory at '0x00XXXXXX'. The memory could not be 'read'. Click on OK to terminate the program Click on Cancel to debug the program."
"FormDesigner.exe - Application Error", "The exception unknown software exception (0xXXXXXXXX) occurred in the application at location 0xXXXXXXX. Click on OK to terminate the program Click on Cancel to debug the program."

Similar Messages

Acrobat application error after 8.2.2 patch

I pushed out the Acrobat 8.2.2 patch this week to our users and have gotten a handful of people respond that they're getting an error when they're launching Acrobat afterwards.
Background:
Workstations were running Acrobat 8.2.0 before the patch and all patched previously (from at least 8.1.6) without any issues. Adobe Reader is not installed on these systems.
Workstations are all running Windows XP SP3.
Problem:
User gets a warning message when launching Acrobat that reads "A serious error has been detected and Adobe Acrobat 8.1.2 Professional cannot continue. Please reinstall the application and try again." When the click the OK button on that dialog they are then prompted with an Application Error dialog for Acrobat.exe "The instruction at '0x05bb1243' referenced memory at '0x03db9bec'. The memory could not be 'written'"
Workaround:
A simple reboot resolves the issue sometimes, other times a repair is needed and others need to be reinstalled.
Anyone got any ideas why these errors are occurring and what I should be looking out for so that this doesn't repeat in the future?

Just noticed this post was a bit old......My version with the same issue was 8.2.6.
This seems to be a recurring issue if you seach the forums.
I was able to fix mine with a repair instead of an uninstall reinstall.
I accessed the repair option via the control panel ----->add/remove software----->adobe acrobat pro

Adobe Acrobat 8 Pro Application Error Event ID 1000

Version: Adobe Acrobat 8 Pro (Updated)
Operating System: Windows XP (Sp2)
Launch Adobe Acrobat 8 Pro
Select File and open a PDF file
Popup appears: Reading Untagged Document
Then and error appears ... Adobe Acrobat 8.1 has encountered a problem and needs to close
Also receive same error when I select Edit\Preferences
Application Event log contains the following:
Application Error Event ID 1000
Faulting application acrobat.exe, version 8.1.0.137, faulting module admplugin.apl, version 3.16.128.32, fault address 0x000a7bf1.
Have uninstalled and reinstalled application...no change
Any help would be apprciated

No, I have not.
Had another laptop and used it.
Re-imaged laptop exhibiting the issue and moved on
Edward Bailey | Network Administrator | Pizza Inn, Inc
t. 469.384.5231 [email protected]

Acrobat 8.1 Pro Error AcrobatInfo.exe - Application Error

Ever since updating to Acrobat Pro 8.1, I keep getting an error message.
Font Capture: AcrobatInfo.exe - Application Error
The Instruction at "0x03da593c". The memory could not be written.
The error pops up several minutes after closing Acrobat. I wonder if it is from a .pdf from across the network.
Doesn't cause a crash but it is getting annoying.

Jeremy,
All I could find was the REG file that was included on that link's site. If you want to trust this, just copy the text between the ======== and save as a .REG file, then execute the file. I am taking no responsibility for this file or what it may (or may not) do to your computer. It is simply the REG file I got from that site. It's up to you whether you use it or not.
It's been so long now since I used Jochen's method that I can't remember for sure, but I believe I also tracked down the "AcrobatInfo.exe" file and deleted it (probably while in safe mode).
===========================================
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18 \Components\21C0FC0AB3C24344FB30C34266AA5E09]
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{98D9A6F1-4696-4B5E-A2E8-36B3F9C1E12C}]
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\AcrobatInfo.exe]
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Low Rights\ElevationPolicy\{AC76BA86-1033-0000-7760-000000000002}]
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\AcroExch.Document]
"BrowseInPlace"=-
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\AcroExch.Document.7]
"BrowseInPlace"=-
============================================
Good luck.

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at 0x....bad8 The memory could not be written Click ok to terminate the program)
Instruction at 0x...bad8 bad referenced memory at 0x....bad8
The memory could not be written
Click ok to terminate the program

Hi SUBRAMANIAN,
Are you still facing this issue? It seems to be conflict to me.
Are you using any third party plugins with Acrobat? Try disabling and to use it again.
Regards,
Ajlan Huda.

Acrobat IEHelper: iexplore.exe - Application Error

Every time I close internet explorer i get the message "Acrobat IEHelper: iexplore.exe - Application Error The instruction at "0x01801ea8" referenced memory at "0x01801ea8".
The memory could not be "read"" What do i do?

What version of Acrobat reader did you installed???
Try to remove this application, clean the registry (with CCleaner), download and install the newest version of Acrobat reader!
Thats all

Acrodist.exe application error

I installed Adobe Acrobat 7.0 successfully. But when I convert a word file into PDF file, a error message pop-up as " AcroDist.exe application error --- the instruction at "0x0048C9e5" referenced memory at "0x0190eb6c", The memory could not be "read" Click on OK to terminate the program "
If I click the program Acrobat Distiller, the same message box shows up.
I tried to uninstalled and re-installed. Couldn't solve the problem.
need help.

This problem came up on my laptop today and I have found a solution, at least on mine. I was getting the exact same error as above (with different memory locations) when I tried to start Distiller (Acrobat 7.0). It had worked fine for years. On mine it was limited to my specific user account. I could run Distiller fine from the Administrator account. I also created a new standard user account to test with and it ran fine from that one as well. But it wouldn't run from my personal account. So I knew it was something with that specific account.
To make a long story short, it ended up being a corrupt cache. You can find the cache in the following location:
C:\Documents and Settings\[your user name]\Application Data\Adobe\Acrobat\Distiller 7\
What I did was just rename the old cache folder and let distiller recreate it. That fixed it. Good luck.

Application Error: "The memory could not be 'read'."

I am programming an application in C#.
I am using an Acrobat Reader control on my form to display PDFs within my program.
I have tried a couple of different configurations with the form control. I have drag-and-dropped the control prior to runtime. I have also tried to add the control dynamically.
When I run the program, then activate the control and close the form, I get the following error.
"sw:name.exe - Application Error; The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be 'read'. Click on OK to terminate the program."
I have googled this error for hours now, and cannot find anything that truly explains this error and how to fix it.
Thank you for any help.

To who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.
It seems that, somehow, LabVIEW, and other programming tools, straggle with this version of Adobe (I assume that this is due to this bug) when closing the reference to Adobe created by the ActiveX container. So the solution would be closing "by hand" this reference, and telling Windows to free all the relation between the application (LabVIEW for us) and Adobe. The idea is that when we've done with the VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:
- process all the Windows messages currently in the message queue (.NET: System.Windows.Form.Application -> DoEvents
- run CoFreeUnusedLibraries in "ole32.dll"
I hope this information can help somebody, as I wasted too much time to figure this out (finding eventually the answer in a forum of Adobe!)
P.S. For those who program in C# as well, check this link; this was my source.

I've got error message " CTSvcCDA.exe application error " during insall MediaSour

I need help anybody who has soultion about this error .
When I install Nomad Explorer & MediaSource, I had two error message .
first, in case of nomad explorer, "security.exe application error"
seconde,Mediasorce, "CTSvcCDA.exe application error"

Try disabling Protected Mode. But since you cannot even open Adobe Reader by itself, you can do it via the Windows registry: download, unzip, then run the registry script from https://files.acrobat.com/a/preview/441a5fb2-7a82-443d-9632-9a639692a565

Application Error 1000, 1002, 1005, 1024, 5007,11500 & 11311

Any help with any or all of these problems would be greatly appreciated...
Thank you for your review ahead of time...
+ System
- Provider
[ Name] Application Error
- EventID 1005
[ Qualifiers] 49152
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-04-27T11:19:25.000Z
EventRecordID 101445
Channel Application
Computer owner-PC
Security
- EventData
C:\Windows\Fonts\JI-Chided.ttf
Acrobat Distiller
C000009C
3
+ System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-04-27T01:34:56.000Z
EventRecordID 101342
Channel Application
Computer owner-PC
Security
- EventData
AcroDist.exe
8.0.0.456
453c6dff
AcroDistDLL.dll
8.0.0.456
453c6df8
c0000006
00242138
16f4
01c8a806d8f87541
+ System
- Provider
[ Name] MsiInstaller
- EventID 1024
[ Qualifiers] 0
Level 2
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-04-24T19:46:48.000Z
EventRecordID 99863
Channel Application
Computer owner-PC
- Security
[ UserID] S-1-5-21-929786392-3332467027-646626929-1000
- EventData
Adobe Acrobat 8 Professional
{AC76BA86-A660-0000-2550-7A8C40000812}
1642
(NULL)
(NULL)
7B41433736424138362D313033332D303030302D373736302D3030303030303030303030337D207B414337364 24138362D413636302D303030302D323535302D3741384334303030303831327D2031363432
+ System
- Provider
[ Name] Application Hang
- EventID 1002
[ Qualifiers] 0
Level 2
Task 101
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-04-24T19:48:34.000Z
EventRecordID 99870
Channel Application
Computer owner-PC
Security
- EventData
AcroTray.exe
8.0.456.0
bc0
01c8a6403667eb8d
16
55006E006B006E006F0077006E0000000000
+ System
- Provider
[ Name] MsiInstaller
- EventID 11311
[ Qualifiers] 0
Level 2
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-04-26T17:22:53.000Z
EventRecordID 100920
Channel Application
Computer owner-PC
- Security
[ UserID] S-1-5-21-929786392-3332467027-646626929-1000
- EventData
Product: Adobe Acrobat 8 Professional -- Error 1311.Source file not found(cabinet): C:\Program Files\Adobe\Acrobat 8.0\Setup Files\{AC76BA86-1033-0000-7760-000000000003}\Data1.cab. Verify that the file exists and that you can access it.
(NULL)
(NULL)
(NULL)
(NULL)
7B41433736424138362D313033332D303030302D373736302D3030303030303030303030337D
+ System
- Provider
[ Name] MsiInstaller
- EventID 11500
[ Qualifiers] 0
Level 2
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-04-27T01:40:23.000Z
EventRecordID 101355
Channel Application
Computer owner-PC
- Security
[ UserID] S-1-5-21-929786392-3332467027-646626929-1000
- EventData
Product: Adobe Acrobat 8 Professional -- Error 1500.Another installation is in progress. You must complete that installation before continuing this one.
(NULL)
(NULL)
(NULL)
(NULL)
7B41433736424138362D313033332D303030302D373736302D3030303030303030303030337D
My email is [email protected] if you have a advice or help..
Like take this computer out behind the barn and shoot it I am happy to take it.. Thank you, JW

Hi,
I am also facing the same problem.Can you suggest the solution? as well as the formula you used.
Regards,
Karthik

AR 9.X Crashing IE (6 and 7) when opening PDF with sw:iexplore - Application Error

The majority of my systems are having a problem with Acrobat Reader 9.0 and 9.1.
When they click on a PDF from within IE the browser crashes with the following error:
sw: iexplore.exe - Application Error
The instruction at '0x051251b6" referenced memory at '0x00000010". The memory could not be "read".
Running AR 8 causes no difficulty, however I have an organizational requirement to have addressed the in-the-wild vulnerability of AR by March 18th for 100% of my client systems. And Adobe is holding on to those versions until the 18th.
So I _have_ to install 9.1 on 300 systems in the next 36 hours.
If I take the check mark out of 'Display PDF in Browser' it works fine. The problem with this solution is that there are certain web sites and applications that departments here use which absolutely requires that the PDF be integrated within the browser - so taking Display PDF in Browser is not a universal solution.
I have tried the following key to no luck:
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\SOFTWARE\Adobe\Acrobat\Exe]
@="\"C:\\Program Files\\Adobe\\Reader 9.0\\Reader\\AcroRd32.exe\""
On a couple of machines opening up Reader and closing it first while having admin rights clears up the problem - but not for the majority of my systems.
I've tried repairs, reinstalls, full reloads and reboots to very little luck.
It's is for various PDF files from different sites, and it's the same ones that work for the small number of systems not experiencing a problem.
Any suggestions would be welcome.

> Adobe is holding on to those versions until the 18th.
The 18th is tomorrow, so why not wait for it?

Right Click Convert - Application Error - Adobe Pro 9

Hi all
I got following error when I try to convert a office document to pdf via the context menu:
"Acrobat Elements.exe - Application Error"
The instruction at "0x616321dd" referenced memory at "0x00000001". The memory could not be "read".
This happens with Adobe Pro 9, and all Adobe Pro 9 patches.
Testet on ~ 15 different machines, freshly installed machines etc. Before that we had Adobe Pro 7 and there it worked without a problem, the problem just happens when we install Adobe Pro 9.
Does anyone have a solution for this or a hint?
Cheers
Patrick

Hi kernwh,
I checked for the same but it only asks once for the file name.
Please upgrade Acrobat X to 10.1.12 and then check.
Regards,
Anubha

'Unable to Launch Application Error' - Java Web Start Running Under MS IIS.

I am attempting to render the following .jnlp in MS IE:
<?xml version="1.0" encoding="utf-8"?>

<jnlp
   codebase="http://localhost/LottoMadness/"
   href="LottoMadness.jnlp">
   <information>
     <title>LottoMadness Application</title>
     <vendor>Rogers Cadenhead</vendor>
     <homepage href="http://localhost/LottoMadness/"/>
     <icon href="lottobigicon.gif"/>
   </information>
   <resources>
     <j2se version="1.5"/>
     <jar href="LottoMadness.jar"/>
   </resources>
   <application-desc main-class="LottoMadness"/>
</jnlp>I've deployed the .jnlp, .gif, and .jar to MS IIS, running locally on my PC.
When I attempt to render the .jnlp in IE I obtain an 'Application Error' window stating 'Unable to Launch Application'. Clicking details gives me:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost/LottoMadness/LottoMadness.jnlp
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)I have configured MS IIS for Web Start, by setting the Extension/Content Type fields to .jnlp and application/x-java-jnlp-file.
(The .jnlp is basically from 'Programming with Java in 24 Hours', as this is the book I am learning Java from.)

AndrewThompson64 wrote:
I am not used to seeing references to a local server that do not include a port number.
E.G. http://localhost:8080/LottoMadness/
I have deployed the following HTML (HelpMe.html) to the web server:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title>Untitled</title>
</head>
<body>
Help Me!
</body>
</html>When I attempt to render the URL in IE, I see the page just fine. The URL is use is:
http://localhost/LottoMadness/HelpMe.htmlSo, I think my web server setup and usage is ok.
>
As an aside, what happens if (your MS IIS is running and) you click a direct link to..
[http://localhost/LottoMadness/LottoMadness.jnlp|http://localhost/LottoMadness/LottoMadness.jnlp]
When I click this link I get the error and exception I cited in my previous post.

Application Error while activating the feature - for creating list content type, list definition and list instance

Dear all,
I am getting application error while enabling the feature. if any body can point out the issue - that will be helpful.
content type
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns"/>

<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9"
Name="TrainingCourses"
Group="Training Content Types"
Description="Defines a Course"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE"/>
</FieldRefs>
</ContentType>
</Elements>
List definition
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="TrainingCourses"
Type="10100"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="TrainingCourses"
Description="Training Courses List Definition"
Image="/_layouts/images/itgen.png"/>
</Elements>
List instance
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="TrainingCourses"
OnQuickLaunch="TRUE"
TemplateType="10100"
Url="Lists/TrainingCourses"
Description="Training Course List Instance">
</ListInstance>
</Elements>
schema
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="TrainingCourses" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/TrainingCourses-LD_TrainingCourses" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9" Name="TrainingCourses" Group="Training Content Types" Description="Defines a Course" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{4c1b0a21-fce0-4cfe-8742-a250672afe4f}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns" />
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
I am applying the feature to SPWeb level.
cheers
Sathya

redeployed a new solution; since I was getting this error. I would have done typo errors etc.
https://naveengopisetty.wordpress.com/2011/09/10/error-occurred-in-deployment-step-activate-features-invalid-file-name-the-file-name-you-specified-could-not-be-used-it-may-be-the-name-of-an-existing-file-or-directory-or-you-may-not-have-pe/
Cheers
Sathya

Receive an Application Error (The memory could not be "read") when opening

After I install Itunes the program works ok until I close it and try to reopen. When I do this I receive an Application Error that says:
The instruction at "0x6686f183" referenced memory at "0x0fccc094". The memory could not be "read".
Click OK to terminate the program
Click CANCEL to debug the program
Debugging does not work so the only solution is to uninstall Itunes and then reinstall. That again only works for one use of the program. As soon as I close it and re-open, I get the same error. Please HELP. I cannot waste any more time uninstalling and reinstalling.
Sony Windows XP

Try this: Turn off automatic Microsoft/Windows updates and reboot your computer. I saw this a couple of weeks ago on the forum.

LiveCycle/Acrobat Application Error

Similar Messages

Maybe you are looking for