LiveCycle Designer won't preview with Reader DC. Preview mode will not work. Attempting to preview gets errors (507:507), (103:103), and sometimes crashes LiveCycle Designer. How do i get preview mode?
I can not get LiveCycle's preview mode to work. It has worked in the past, but now with Reader DC i can't use preview mode. How do i get Adobe LiveCycle designer to work with Reader DC?
nikg-fh schrieb:
it seems the problem is caused directly by adobe reader X.
I just have started a new descussion here (adobe reader forum).
If anyone could help me, feel free to do so!
my configuration:
windows xp pro
adobe reader x
adobe livecycle designer 9 ( therefore it is not an version 8 issue )
admin rights on the pc ; )
I might add that you are not alone!
I am having the same problem (LSD ES2 (version 9.0.0....) and Adobe Reader X and Acrobat Professional 8)
Whenever I save a form as PDF and open it with Reader or Acrobat I get to see the console.
But never when I view the form in Designer preview!
That used to work until I installed Reader X.
Same as you I checked all configurations in Reader and Acrobat: all perfect.
I really do hope that someone finds a solution for this.
PS. This problem should be discussed in THIS forum. It is clearly a Designer problem!
Similar Messages
-
I fell in a lke with my iphine in an Otter Box case yesterday it workied this morning but it will not work now all I get is a white apple on the screen when it is pluged in to computer
Yes, water and electronics do not mix. Water damage can get worse with time.
You should've left it to fully dry out in a bag of rice for a few days, and hope that the water hasn't corroded any of the electronics inside. -
IPhone 6 with iOS 8, AirDrop function will not work.
Hello,
I just bought my wife and I to new iPhone 6 with iOS 8.02 on them.
We have tried to use AirDrop multiple times but it will not work.
wi-Fi and Bluetooth are both enabled, and we have it set to discover are sent to everyone. No matter what we do the phones will not discover each other and will not send an airdrop photo or anything else to the other phones.
I am wondering if anyone else has run into this issue, if it is widespread are there is possibly something I am missing, however the procedure seems straightforward and it appears that it could be an iOS issue or something else going on. It should be noted however that some functions a Bluetooth work, such as connecting to Bluetooth speaker. But the iPhones will not discover one another and AirDrop simply will not work.
does anyone have any ideas on how I can resolve this issue .
any ideas are welcome and appreciated, thank you, Pete"Although my local Apple store told me face to face that I could not go back and restore to an older version of iOS, my cellular service suggested to save data to iCloud and restore to the store's original iOS 7."
Okay, so I couldn't go back to the factory iOS 7 as the Apple store employee told me. Drat! Note to self, do not automatically update iPhone first thing if it's already working! -
My apple id will not work with ichat., my apple id will not work with ichat.
My ichat will not work with my apple id. How can I make it work without changing my apple ID?
the error message reads:
your account has been disabled
This Apple ID account has been disabled for security reasons. Tap Reset to reset your account
I have reset my account ID but it still does nit work on my IPAD.
Does work on my IMAC and IPHONE -
updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it
Settings>General>Reset>Reset All Settings
-
So I recenty upgraded my Mac to OS X Snow Leopard (10.6.8) and the xcode that came with it would not work effectively. I just downloaded xcode 3.2.6 with ios sdk 4.3 from Apple and installed them (after having to change the date to 2011). Xcode worked but opening the interface builder resulted in a blank window opening, not the actual interface builder. So then I tried to reinstall the .dmg file of xcode and ios sdk, which was again successful, but when I click on any of the applications it installs to open them I get an error. This is what happens when trying to open xcode:
Process: Xcode [4609]
Path: /Users/myname/Desktop/Xcode.app/Contents/MacOS/Xcode
Identifier: com.apple.Xcode
Version: ??? (???)
Build Info: DevToolsIDE-18070000~38
Code Type: X86 (Native)
Parent Process: launchd [92]
Date/Time: 2012-07-21 23:18:17.358 -0400
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 3537 sec
Crashes Since Last Report: 13
Per-App Crashes Since Last Report: 13
Anonymous UUID: F17937FB-B272-4B47-811F-333D66AB2B3B
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @rpath/DevToolsFoundation.framework/Versions/A/DevToolsFoundation
Referenced from: /Users/myname/Desktop/Xcode.app/Contents/MacOS/Xcode
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBook1,1, BootROM MB11.0061.B03, 2 processors, Intel Core Duo, 1.83 GHz, 1 GB, SMC 1.4f12
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x86), Atheros 5424: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2120BH, 111.79 GB
Parallel ATA Device: MATSHITACD-RW CW-8221
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0217, 0x1d200000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000 / 2
Can anyone please help me? Ps, I've changed the directory location to "myname" for security reasons;p so that is not the problemThe error message is telling you that the linker is looking for the Xcode executable on your desktop and can't find it. Where did you install Xcode? The default location is in /Developer.
It sounds like you have an outdated alias to Xcode on your desktop. Can you launch Xcode if you navigate to Xcode in the Finder and launch it from there? -
Hamachi status reads fine but applications will not work
I have a problem with my Windows 8.1 PC not wanting to use Hamachi correctly with any 2.2.x version. It's not the software's fault, or my ISPs, or my networks, but the computer it's running on. Any connection made through hamachi results in a time out (At least according to Minecraft). The In packet loss goes to 50% while a connection is attempted. All Hamachi status indicators on both ends read green, including the diagnose option. I am a relatively technical user so if there is ANYTHING that would make the 2.2 versions not work and the 2.1 versions work then I would be willing to try it. I've done all the standard stuff like uninstall and reinstall, disabling firewalls, and disabling AV but none changed the outcome. I am very likely to have stupidly messed up some internal Windows setting, but I doubt even the devs know of their effects. Upgrading to Windows 10 might fix this and if it does I'll just thank anyone who left feedback and mark this as solved.
Same result after Windows 10 upgrade. Log reads messages similar to "sending ka because of possible rx loss, want 22, have 27"
-
I have just upgraded my iPad to iOS 7 and now FaceTime and iMessage will not allow me to sign in. I enter my appl I'd and password but after a few minutes I get a message to say cannot activate try network connection then try again no matter how many times you do this it will not sign in. Any thoughts ?
Thanks neiltry resetting your phone by turning it off and back on again. The servers may still be having a hard time keeping up, so you may just need to wait a little while and try again.
-
Back on Dec 23 I ask if it was possible, after upgrading to version 3.6.13, could I go back to the version I had been using. A very helpful person, "Buddahfan", instructed me how to accomplish this. I have downloaded version 3.5.16, as this is what I think I had before. Anyway, my reason for not wanting 3.6.13 is it will not accept a VERY helpful add-on I have come to use daily, Roboform. Problem is the advertisement for the new version states it will work with all add-ons and it obviously does not. What benefits am I losing by sticking with 3.5.16 after I have downloaded all updates?
All you needed to do for 3.6.13 was to install the latest Roboform adapter for Firefox from here: <br />
http://www.roboform.com/platforms/browsers/firefox -
Updated to iOS 7 with kensington keyboard, Bluetooth keyboard will not work, help
I Made the mistake of updating and now my Bluetooth kensington keyboard purchased with ipad won't work. Anybody know a fix?
Reset Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
Cheers, Tom -
when i go to the IRS site to view a document ie pdf it goes there but nothing is on the page...this is for any adobe reader type file or download..
See:
* https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it -
iPad mini
What app is it you are trying to update? Also have you tried resetting your device by holding down the home and power button for 15 to 30seconds until you see a silver apple then let your device start normally. And attempted to update the app again?
-
~READ~ I^^^TUNES STORE WILL NOT WORK^^^ ~~READ~~
ok lets get this straight ~~~~~~ i tryed all security things and internet things my itunes store just wont work...my internet works fine but the store doesnt...Ive tried opening the internet then trying the store NOTHING ive also tried reinstalling itunes 3 times it just wont work HEEEEEELLLLLPPPPP
First have you ever connected to the store before? It
might be temp down in your area/country. Do you
connect thru dail up or broadband? If on Broad band
have to tried settings on the modem or router?
Yes i have connected to the music store before
I connect threw broadband -
I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.
Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
I just bought this and was trying to load it for the first time and the circular icon just keeps flashing like it is trying to load and can't. Most elements come up but I am wondering why it is still flashing like it is trying to load.
At times, the drop down menus will not stay up. When I click on them, they flash and then disappear.
This is not a blank message.Not the help you're looking for -- sorry -- but I'm fighting a battle with Adobe tech support, too. They won't help me with an issue involving using the program, but their site seems to indicate that tech support is available for download, install, & setup. Check page: https://helpx.adobe.com/contact/what-contact-options.html and try calling them again. Good luck!
Maybe you are looking for
-
Reprocess the IDOC without using BD87
Can I reprocess an idoc through a zreport in the background. can i use the program behind BD87 and use a submit statement? But BD87 genertes an output from which you have pick your idoc and reprocess it manually. Thanks, krishna.
-
Archive log files are not being created
I am doing some testing of the backup and recovery of our databases. I have a database which is in archive log mode. I have added some records to a table and I am expecting to see some archive files being written to but nothing is being produced. We
-
My Old IMac G5 kaput, its ON or seems to be ON but its black screen can't do anything, though all my pictures and files are there. I want my photos and my itunes library Can't seem to get them. ( I have not been able to share them to my phone or la
-
Easy: Convert Path to Selection Quickly
I''m using Photoshop CS2: I'm coloring comic book pages as a hobby and to create areas to fill, I make a path with the pen. I then convert the path to a selection and fill it with the paint bucket. But converting the path to a selection requires cl
-
Creating custom components in CS3
Can anyone here point me to a place to look to learn how to make custom components in CS3? I found only two tutorials on it on the entire internet - FlashBrighton and a SWC version posted by someone named smackme. Neither of them really explains the