LiveCycle Form data appearing in Preview but not in Output

Hello!
We have forms that were converted from Adobe Central to Adobe LiveCycle. We're testing a form now to ensure it is working properly. When looking at the form in Preview PDF we can see the data from the XML source display on the form. However, when we run our process to generate the form, the data does not appear. Any thoughts as to why the data is not appearing when we run our process but appears in the preview?
Thanks,
Wendy

Hi Shreesh,
Please check follow the below points.
1. For which info providers you are not getting data at report level check the reporting availalabilty at manage screen.
2. Also check whether Identifation (assign) for primary key characteristics for all the infocubes has been done .
Ex: as you are loading the data for FI cubes, 0account will become one of the primery key characteristic to be Identified as a common object.
4. Create Queries seperately on the infocubes for which you are not getting data instead of creating report on multiprovider. So that you can get some clue.
Thanks

Similar Messages

Crystal reports 2008: Data appears upon refresh, but not on initial open

I have an updated crystalreports.com / salesforce.com report to which I added a new subreport and an additional grouping. The report is working fine, with one (rather major) issue: when the report is first opened, only some of the data is shown - there are ~15 columns of data, most of which populate, but some individual values, which sometimes means an entire column of data, do not appear unless the report is refreshed.
I have the original report still loaded in crystalreports.com, so that I can (and have) run both reports one right after the other; on first open, the data doesn't agree. When I refresh the newer report, the 'lost' data appears and everything is fine.
(Makes for a tough sell, though - 'Oh, just refresh the report.')
Any thoughts as to a) what might be causing this, and b) how it might be resolved?
It is not subreport data that is being affected, just so you know - that's working beautifully; the affected fields are Standard Summaries of formula fields, and not all instances of those summaries, either, but specific ones again and again.

I have not used the 'Save Data with Report' option, and I verified that it is not selected under File / Report Options as well. It appears to be an issue when there are too many (unknown how many that is, as of yet) results being retrieved.
In this case, the main report is a report on Activities from the start of the current year, using a Salesforce.com report, and the Subreport pulls its data directly from the Activities table (as the main report considers all of the fields to be String(255) fields, even if they are ought to be read in as Memo fields (or number)). The link to Activities allows the Description field to be pulled in based on the Activity ID, and coming straight from the database the value is pulled in as a Memo.
If I limit the Activities to records beginning with 'A', for instance, the report runs fine; 'A - G', in this instance, retrieves too many and the error re: the database connector appears.
Edited by: prozek on Apr 22, 2010 7:53 PM

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which ar

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which are current on IOS. Help!

the wifi router could also be blocking
and to really test if the windows firewall is the problem then try turning it off!
if that scare you too much then disable the internet modem / cable modem or the likes while you test
always remove more and more factors when troubleshooting sooner or later it will work and you can narrow down which factor did the job and work on that

Two issues getting a headless error form windows & my clips audio plays in the preview but not once placed in th timeline. I taped with a panasonic HC 750 V. i believe it is with clips filmed using directed not surround audio.

The title more or less says it all. I have Elements 13 & am Using the Panasonic HC 750V. I shot in AVCHD 1080/60p & instead of surround sound choose the directed feature to focus on the voices in front of me. The audio works in preview but not on the timeline. I am also getting Headless errors when working with premiere that pop up in windows but it does not shut down the system.
Any help apprecaited.

pc
Have you updated your Premiere Elements 13 to 13.1 using an opened project's Help Menu/Update. If not, please do so.
Just some points of clarification on the AVCHD 1080/60p with which you are having audio problem in Premiere Elements 13.
a. I see no option to record to tape with your Panasonic model. Is there one? if not, what was recorded to, a memory card?
b. When you talk about directed not surround audio, are you saying that your video uses Dolby Digital 2 channel stereo instead of 5.1 channel?
c. Is your AVCHD footage presented to you as AVCHD.mts rather than AVCHD.mp4. I think that is the case if you are referring to Dolby Digital
rather than AAC audio.
Are you saying that you get play back video and audio if you double click the video's thumbnail in Project Assets, but you get video but no audio after you drag the file to the Timeline and play back its contents in the Edit area monitor?
a. Have you checked the Volume control under the Adjust Tab/Adjustments Palette/Volume Panel expanded to make sure the Volume has been taken all the way down? Under that condition, you will get play back in the Preview Window, but no audio from the Timeline level play back in the Edit area monitor.
b. In that same regard, if you look at the Timeline audio clip, note a yellow orange line that runs horizontally across the duration of the audio clip. Is that at the bottom of the frame or is it in the middle or at the top?
Do you work with the Elements Organizer at all? That Headess issue sounds like an Elements Organizer issue. More on that later. That issue should not prevent you from continuing your work. But we will explore that next.
Thanks.
ATR

Standard text displayed correctly in print preview but not in print

Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa Aggarwal

Hi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby

Flash work in preview but not in the browser!?

Hi there:)
I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
Thanks!
V

Hi John!
Yes, sorry about that.. here it is.
http://farmingtonfarm.com/appraisal.html
Thanks for your help!!
v
Date: Thu, 8 Apr 2010 18:52:05 -0600
From: [email protected]
To: [email protected]
Subject: flash work in preview but not in the browser!?
Can't really help without a link to the site. Can you provide one?
>

TS1363 "iPod: Appears in Windows but not in iTunes" Isn't working!

I've tried all of the things in the "iPod: Appears in Windows but not in iTunes" but none of them work.
I'm on Windows 8 and those are the instrucations I've followed.
The only thing I haven't done is reset my computer to factory mode but that Isn't an option for me cause I got saved games that can't be backed up.
I've literaly tried everything in that help page and it doesn't work.
All I get is the iTouch charging, asking me to trust the computer, I say trust, nothing happens, I check the device manager and it doesn't shw the USB no matter what, I restart the ipod services and the apple software services, nothing happens, I completely take dwn my McAfee firewall and scanning system, it doesn't work, restarting it to make sure no viruses attack, uninstalled Razer Synapsis because it has been a pain in the butt before, that doesn't work, I emptied my Temp file and that didn't work, And in the end the iTouch is charging but not even being see by Itunes and no updates, restarts, reinstallations, uninstallations, checking, researching, and anything else I can do works.
Can someone please explain why apple tech is such a pain when it comes to Windows 8 and how I can fix this without losing 2 years worth of school and saved games?!?!?!?

Try a full teardown as in Troubleshooting issues with iTunes for Windows updates?
A recent poster to forum is suggesting uninstalling WMP from Windows?
Connect the device to a different compuer and back it up there. You should be able to copy off the library to a portable hard drive. See also Recover your iTunes library from your iPod or iOS device.
tt2

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Getting values in preview but not on paper

hi gurus,
the variables on a window is showing values in preview but not on paper the window is above a top-left portion of other window..
i need to display those variables on paper at print time...as alignment is perfect ..suggest me how to do?
thnx in advance!!

DEAR SEE THE POSITIONING OF WINDOWS,
FOR THE BOTH WINDOWS WHICH ARE COLLIDING,
GO TO OUTPUT OPTIONS AND MAKE UPPERMARGIN AND HEIGHT IN SUCH A MANNER THAT THEY NO LONGER COLLIDE.
SEE THE OUTPUT.
I THINK THEY ARE COMING NOW.
REWARD IF USEFUL.
aMIT sINGLA

Events entered in Calendar on iPhone 4S/iOS7 appear in cloud but not on iPhone.

Events entered in Calendar on iPhone 4S/iOS7 appear in cloud but not on iPhone.

my iphone will not allow me to save events on the calendar. I use the plus sign and get a screen to enter the event name and time but when I go to hit save, it is not there. When I hit "done" which is where the "save" button should be, the screen disappears and the event is not saved. I tried seeing if all of my calendars were on but that doesn't appear to be the issue.

Ipad appears in computer but not in itune

ipad appears in computer but not in itune

Make sure the Apple Mobie Device USB driver is properly installed on computer (tap to enlarge image)

Took backup of data files and controlfile but not archive file db is 11g xe

took backup of data files and controlfile but not redo file db is 11g xe r2..was trying complete shut backup,..missed redo..
anyway to restore the db back..
I had failed to backup redo log file..
db was shut...properly
any info highly appreciated.
cheers
Edited by: zycoz100 on Feb 27, 2013 4:42 AM

A controlfile create is a fairly trivial task, for either a cold backup or hot backup scenario. Well, its an easy task after you've done the process a few times.
If you have a healthy oracle instance running any place else, preferably at 11gR2, or even a 10g instance can work as an example, get a system connection and do an `alter database backup controlfile to trace;` and the instance will create a new trace file with all SQL commands needed to rebuild the controlfile in the instance trace directory.
Have a look at the trace file, a `show parameter diag` reveals the diagnostic_dest parameter, look for the "trace" directory under that folder, for the latest *trc file. In 10g its `show parameter dump` and the trace file goes straight to the user_dump_dest directory, no digging required.

I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now? in English

# Question
I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now?

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

Why do fonts appear in Keynote, but not in Font Folder?

I made a misguided move in adding fonts through Font Book and am trying to restore my fonts to a previous iteration. Strangely though, the fonts appear in Keynote, but not in the usual Fonts folders. Can anyone shed light on why this might be the case? More information can be found, under the Mavericks discussion forum, here.

Suzanne,
As is my guess, there is now something wrong with those fonts. There are utilities, that can possibly repair them - two mentioned in the article. If you have a backup of the fonts, from when they worked, perhaps just going to that, and reinstalling them will solve the issue. I'd hate to think that they might have to be acquired all over again, but that might be "plan D."
Periodically, I will copy all of my fonts to DVD (now - used to be CD), just to have them available for new computers, or OS's. Over the decades, I have lost a few to corruption, that could not be repaired. In several cases, I had an older BU, that did work, but have had to buy a few again. Just checked on my workstation, and I've got 19,362, though seldom more than about 350 ever installed at one time.
This reminds me that it's about time to do another BU, as I will be getting a new workstation and laptop fairly soon, and will need to transfer my fonts to them.
Good luck, and hope that things can be saved - I hate to loose a favorite font.
Hunt

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason

LiveCycle Form data appearing in Preview but not in Output

Similar Messages

Maybe you are looking for