LiveCycle/JBoss just dies after several minutes. Have to rerun Configuration Manager
I installed LiveCycle ES Turnkey with JBoss on a fresh install of WinXP Pro and it seemed to work flawlessly. I followed the turnkey install guide and it went without any problems. After the install I opened the LC Administrator Console and logged in with no problems. I changed the passwords and poked around a bit. It sat idle for a few moments and the next time I tried to do anything I get the standard Failed to Connect message as if I were trying to browse the web while not online.
I've tried several things to bring it back to life -- restarting the service (it's 'JBoss for Adobe LiveCycle ES' right? it always fails to stop this service when I try to restart it.), restarting the whole machine, starting the server from run.bat in jboss\bin... nothing works. I have to run the Adobe LiveCycle Configuration Manager again to be able to connect to http://localhost:8080/. I've done this three times now and every time it's the same thing. It works for several minutes and then dies for seemingly no reason.
I really appreciate any help I can get!
Hello brianus
If you have checked for Possible hardware or software conflicts, you may have a hardware problem.
You sound like an experienced user that has done considerable troubleshooting, but you can consider How to test your iSight to ensure it is functional in case something there might help you.
If none of those suggestions or Apple's How to Troubleshoot iSight helps you, your iSight will likely need repair by an Apple Service Technician. There are no user serviceable parts in iSight.
Even if the iSight you bought was advertised as an NOS (new, old-stock) iSight, it may not be covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be interested in Apple's iSight Service: Frequently Asked Questions.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight
Similar Messages
-
Overrun error (-1073807252) occurs after several minutes
Hello folks,
I have a LV 7.0 program that terminates after several minutes of running with some VISA serial port communication with an error -1073807252, overrun error. I only get this error on Win98 and the latest version of LV (7.0) and VISA (3.01). Does anyone know what exactly causes this error? The help on the error is not very detailed. I tried the same program on a Win2000 PC and it works without any problems. I also tried another VISA communication program on the Win98 PC and the same error occurs.
Thanks in advance,
MichaelDave,
not really a solution, but a suggestion.
Windows is by far not a real-time OS. And there are several buffers
involved when doing serial communication.. The first one when watching
from the serial cable side is the UART. This one is the one that is
affected by serial handshake. A system driver acts as the interrupt
service routine ISR whenever this buffer is nearly filled or emtied and
performs some coying to or from a system buffer. LabVIEW as user mode
program uses this buffer for ist serial reading and writing. This
system buffer is often not taken into account. Its default size is
often not as much as one would expect and some few kB of data may
easily overrun it. I have learned this when performing serial highspeed
transfer with up to 13 ports simultanously.
You can use 'VISA Set I/O Buffer Size' to set this buffer after you
have configured a serial port. AFAIK one can set the buffer size of
both directions to a value of up to 32765 bytes. Yes, not 2^15, but
2^15 - 3. But do not rely on the exact number, please. Test it on
your system.
How can this buffer overrun?
Well, WinDoze can (occasionally) take some time where nothing happens
with end user code. This may happen when awakening the hd from power
save mode or when doing some network actions. And there are a lot of
other possibel reasons. This does not affect the system driver, which
fills up the system buffer when serial transfer is in progress.
Your code may as well operate in 'bubbles' that do not allow to empty
the buffer in-time. Think of DLL code or subroutine prioritized one.
All this may be eased if not solved by setting the system buffer size
to the limit, as it increases the delay your whole system can ignore.
Just my Euro 0.02
Greetings from Germany!<br>-- <br>Uwe -
Wifi connection very slow and interrupted after several minutes
My wifi connection is interrupted after several minutes. I can restart the connection with wifi assisted, diagnose tool. It indicates always ISP failure. When I go through the assistant, it sows that the network connection was changed, and the wifi connection is back. But only for some minutes, then I have to go the the assistant again, and again and again. Also the wifi protocoll tool did not help me.
Meantime I don't have any problems with my IPad or Iphone.
In the web I found plenty of other users with MacBook Pro (Retina) OS X Yosemite, Version 10.10.2 with similar problems. When will apple fix this bug?
Do somebody has in idea how to fix it?
Thanks for your support!
BirdYou posted in the support forum for the Apple routers......AirPort Express, Airport Extreme and Time Capsule.....the products pictured below:
But, your post seems to describe a connection issue that you are experiencing with your MacBook Pro. We are not sure how an Apple router might be involved here if your other devices are connecting well.
You will likely receive a much faster and more informed response if you post your question in the support area for the MacBook Pro linked just below:
MacBook Pro -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
i dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes, please help!
so is there no saving my iphone 4? even if it works fine when its on, can text and phone, email etc. just turns off and then reloads the apple icon and asks for my passscode again. it almost seems as it wont charge.
-
Tecra 9100 freezes after several minutes
My Tecra9100 (P4, 1,8 Ghz) freezes after several minutes. It shows no reaction on keyboard or mouse input.
It doesn't matter whether I'm running WinXP, Linux or just enter the BIOS.
Rebooting the system leads to a shorter period until freezing (several seconds).
First I thought of overheating of the cpu but a small hardware tool shows me that the temperature is normal and the cooling fan works.
Any idea? Perhaps a problem with the VGA?Hi
Yes, its perhaps something wrong with VGA but I think it could be a memory fault.
Try to replace the modules and check if there are some performance improvements.
If not, the technician should check the notebooks motherboard
You know; Its always not easy to say what could be wrong without any diagnostic procedures -
My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago How can I restore this auto feature?
Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)
-
When downloading a movie on my IPad an error message occurs after recording for several minutes that says "Downloading error - please tap to retry". The IPand also kicks out of Facebook after several minutes back to the screen meun. Any advice on how to correct this? Thank you.
Hi MartinVernon,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help
Hello EvanClayton,
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action. -
Dispatcher dies after 1 minute
Hi,
I am on ERP2005 SR2, with Windows 2003 and MSSQL 2005 DB.
I have recently performed a database restore of the SAP database, but I am not able to restart SAP after this.
The dispatcher dies after about 1 minute. You will find the dev_disp and dev_w0 files below:
dev_disp file:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid T01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4204
Thu Feb 08 09:02:37 2007
kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4204) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 08 09:02:41 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapr3s_T01_00 <
DpShMCreate: sizeof(wp_adm) 11648 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000BDA0050, size: 5320400)
DpShMCreate: allocated sys_adm at 000000000BDA0050
DpShMCreate: allocated wp_adm at 000000000BDA1AB0
DpShMCreate: allocated tm_adm_list at 000000000BDA4830
DpShMCreate: allocated tm_adm at 000000000BDA4890
DpShMCreate: allocated wp_ca_adm at 000000000C217030
DpShMCreate: allocated appc_ca_adm at 000000000C21B680
DpShMCreate: allocated comm_adm at 000000000C21CDF0
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000C2A3A70
DpShMCreate: allocated gw_adm at 000000000C2A3AF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000C2A3B20
DpShMCreate: allocated wall_adm at 000000000C2A3B30
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Feb 08 09:02:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sapr3s) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >sapr3s_T01_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Thu Feb 08 09:03:22 2007
ERROR => W0 (pid 4732) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2544) died [dpxxdisp.c 14299]
ERROR => W2 (pid 412) died [dpxxdisp.c 14299]
ERROR => W3 (pid 4944) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2760) died [dpxxdisp.c 14299]
ERROR => W5 (pid 1004) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 4104) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2208) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3300) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3312) died [dpxxdisp.c 14299]
ERROR => W10 (pid 4412) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4112) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4336) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:32 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 08 08:03:32 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4732 Ended no 1 0 0
1 DIA 2544 Ended no 1 0 0
2 DIA 412 Ended no 1 0 0
3 DIA 4944 Ended no 1 0 0
4 DIA 2760 Ended no 1 0 0
5 DIA 1004 Ended no 1 0 0
6 UPD 4104 Ended no 1 0 0
7 ENQ 2208 Ended no 1 0 0
8 BTC 3300 Ended no 1 0 0
9 BTC 3312 Ended no 1 0 0
10 BTC 4412 Ended no 1 0 0
11 SPO 4112 Ended no 1 0 0
12 UP2 4336 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 08 08:03:32 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Feb 08 08:03:32 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 08 08:03:32 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:37 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapr3s_T01_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2584) (SOFT_KILL)
Stop icman
killing process (4720) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2584 HANDLE:516)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2584 HANDLE:516)
wait for end of icman
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4720 HANDLE:528)
DpStartStopMsg: send stop message (myname is >sapr3s_T01_00 <)
NiIMyHostName: hostname = 'sapr3s'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Feb 08 09:03:50 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 452 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 452 (pos=2)
SiSelNRemove: removed sock 452
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 452
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4204) [dpxxdisp.c 10317]
Good Bye .....
DEV_W0 file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Feb 08 09:02:42 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.81)
B New connection 0 created
M sysno 00
M sid T01
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 4732
M
M kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4732) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11648 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5320400)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA4830
M DpShMCreate: allocated tm_adm at 000000000DDA4890
M DpShMCreate: allocated wp_ca_adm at 000000000E217030
M DpShMCreate: allocated appc_ca_adm at 000000000E21B680
M DpShMCreate: allocated comm_adm at 000000000E21CDF0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A3A70
M DpShMCreate: allocated gw_adm at 000000000E2A3AF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A3B20
M DpShMCreate: allocated wall_adm at 000000000E2A3B30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 08 09:02:43 2007
M ThInit: running on host sapr3s
M
M Thu Feb 08 09:02:44 2007
M calling db_connect ...
C Thread ID:2008
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 81
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on SAPR3S
C CopyLocalParameters: dbuser is 't01'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapr3s_T01_00 on host sapr3s (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Feb 08 09:02:44 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4732) [dpnttool.c 327]
Please let me know what to do!
Best Regards,
ThomasHi!
Check that all enviroment variables are complete and still in place?
JAVA_HOME and DBMS_TYPE and so on
Also check that all exe files are of the same version, if not, make sure they are.
You could also try to update disp+work
rollo -
The latest update to Firefox 6 is causing most websites to not download completely, or take several minutes to do so. Definitely did not have this problem before update, witch was only several days ago, I think. Problem does not occur with IE.
Thanks for the response. The 30-40 minutes is a maximum; in other words, it usually drops out much sooner (sometimes after 2 or 3 songs), but has gone that long before.
My main HDD (where my music is) is solid state, and a lot of times I've even been using the computer when it happens, so good thought, but it shouldn't be that.
It did give me a thought though. Sometimes on this computer I experience pauses because I have a constantly active backup drive, and it waits for the drive to catchup. I can try turning that off and seeing if it makes any difference. Definitely something I hadn't thought of yet. Probably be a bit before I try it, but I'll let ya know.
Any other suggestions in the meantime most appreciated! -
Imaging stops after several minutes
Hi!
Im trying to set up PXE and Imaging and have get PXE to work.
I wanted to test with one computer and used C1 to assign policy to this
computer to take image with next boot.
The PC boots up from network and received IP-adress. It shows up with
somekind of SUSE boot-picture and comes up with a menu. Now the computer
seems to hung up and it doesnt respont to keyboard. I can only switch
screen like in Linux ALT-Fx
After many minutes an error-msg shows up and says it can't connect/find
the image-server and then reboot.
The image-server is running on the same server it boots from (PXE-server
and pdhcp).
On console the Image Server screen says now "Update Request = 4", so some
kind of connection must have been doen.
Im using ZfD7, but i guess there is no different from ZfD6.5
Server is NW6.5 SP5
What can be the problem?
Sendt med Operas revolusjonerende e-postprogram: http://www.opera.com/mail/On Fri, 04 Aug 2006 12:45:27 GMT, Ronny Simonsen wrote:
> Im using ZfD7, but i guess there is no different from ZfD6.5
> Server is NW6.5 SP5
there is a ZDM 7 imaging forum..
could you post a log file?
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
The website is a login for work so I can print off the sheets I need for my job. I can get the site to work during the day but in the evening, it doesn't matter what I do, what browser I use, it always loads a blank page. I have scanned for Trojans, disabled java, turned off the security settings, and nothing works. I have even tried accessing the page through the home page only to have the same problem.
I would recommend you contact the web administrator for the site. He/she would likely be of far better assistance; this is clearly a problem specific to the website, not Firefox.
-
Network crashes after several minutes
Hi folks,
I was using LFS for some time and now switched back to arch because of the anoying updates.
I was using the exact same hardware about one to two years before with Arch and there wasn't any problem, so I guess the bug is in the software (or the end user ).
I'm using the ndiswrapper + dhcpcd / dhclient (problem is the same on both), all from the arch repo.
After a few minutes being online (this problem occurs more quick if I do several online tasks at once, like torrent + jabber + surfing, or even loading several webpages at once) my network crashes completely.
With crashing I mean: I can't even kill dhcpd nor unload the ndiswrapper module, if I try the process is loading about a few minutes and then completely freezes (I can't kill the kill proccess, funny somehow). I also checked every log but I just can't find anything in them (nor can I find a special dhcpd / dhclient / ndiswrapper / networks in general log).
I hope one of you guys can help me because I don't want to switch back to LFS.I tried different solutions till compiling both: an older kernel and an older ndiswrapper version, but none of them made any difference.
I guess I'll have to switch back to LFS for now which isn't a huge problem.
I just hate to remember and update all packages myself .
But thanks anyway, I'll switch back to arch in a few month and try it again. -
Apple TV stops playing iMatch music after several minutes
Model: MD199NF/A
Software: 5.1 (5201)
After updating to software version 5.1, I'm experiencing trouble with my Apple TV and my iMatch music.
After starting the music using iMatch it starts normal and nothing is wrong, but sometimes it stops after a few minutes (5-30 min).
The only thing to get it started again is to restart my Apple TV or else it wil keep trying to load my (iMatch) music and nothing happens at all.
Are there more users having this problem? What is the possible solution to this problem?
Thanks in advanceI have the same problem and haven't found an answer or seen one. I don't have any problems downloading/streaming off the net but the iTunes timeout is driving me crazy. Did you ever find the problem?
Maybe you are looking for
-
What is the significance of Marker interface? Why are we using, even though
What is the significance of Marker interface? Why are we using, even though it has no method?
-
Message "InDesign Has Stopped Working"
Hi, I work with ID CS5, version 7.03. The problem was also happening on version 7. I'm on a network system. The problem started approx 4 weeks ago and seems to be worsening. Problem, 8 out of 10 times when I open a document a get a message "Adobe
-
Custom tag attributes and rtexprvalue property
I have created a custom tag. In my .tld file I have added <rtexprvalue>true</rtexprvalue> for several of the tag's attributes. Now I want to be able to pass values to these attributes with the expression syntax: eg <mytagprefix:pager maxRecordCount="
-
[svn:fx-trunk] 8209: Missed a rename from Monday's flex4- spark rename work.
Revision: 8209 Author: [email protected] Date: 2009-06-24 16:09:28 -0700 (Wed, 24 Jun 2009) Log Message: Missed a rename from Monday's flex4-> spark rename work. One of the ant targets in build_framework referenced Flex4Classes which has since
-
Manually changing of Cheque status to "printed"
Dear Forum Members, Is it possible to change the status of cheque to printed even if it is not printed from SAP? If Yes, please let me know how it is possible ? ( this is because on behalf of my client their bankers themselves will prepare the cheque