LiveCycle: Online data collection from PDF to RSS feed

Is there any resource anywhere that anyone could possibly point me to that will help me understand how to extract data from a on-line PDF form (posted at our web site) and push that data to our RSS feed?
I have been searching for anything along this line for most of the day and am not able find anything even remotely similar.
All help is very much...did I say Very Much?...appreciated...
Thanks...

Is the form being returned as a pdf or xml?  You can distribute the form, which will set up a pdf portfolio for your returned forms.  When forms are returned via email, you double click on the attachment and it puts into the portfolio.  From the portfolio you can export one or more forms (data) into an excel file.
To export the whole form, click on File, Export and choose the file type you want.  However, if you just want the form data, I would suggest you distribute the form to create the pdf portfolio for that.

Similar Messages

  • Is there a way to export the data collected with PDF forms, and saved via FormsCentral, into a MS Excel or Access file format?

    or Is there another place to save data collected by PDF forms other than FormsCentral? e.g. another database on the web server that presents the form?

    Hi,
    Yes, you can export user responses into an excel file. To do that, open the responses tab, select Files -> Export Responses and select Microsoft Excel to export response data into.
    Thanks,
    Wenlan

  • Campus Manager No Data Collected from Network

    Just intergraged CiscoWorks with ACS.  Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
    No Data Collected from Network
    1.Devices are not availiable from DCR or
    2.You have not performed data collection at least once
    When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
    We could see devices fine before the ACS intergration but now, we cannot see any devices.
    Any thoughts?

    The devices (original clients) that I defined are as follows:
    10.0.1.*
    10.0.10.*
    10.0.2.*
    I was able to see these clients.  Deleted the above clients from ACS and added:
    10.0.1-10.*
    So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
    I can still see the original clients only.  The others show up in Devices not configured in ACS report.
    What do I need to do?  What did I miss?

  • Online data transfer from R/3 to APO

    Dear friends,
    Can any one help me? What is the transaction code for online data transfer from R/3 to APO?
    Material master;
    BOM;
    Work Center;
    Routing;
    Production version.
    My understanding is to create integration models and activate them:
    /CFM1
    /CFM2
    /CFM3
    Once it is activated I will be able to see the Master data, Material Master, BOM, Workcenter, Routing and Production version in APO?
    Thanks
    Raj
    Edited by: Wilian Segatto on Jan 19, 2010 2:07 PM

    Hello Raj -
    If understand you are saying that the a batch job is run every 12 hrs to send in the master data from r/3 to APO?
    if thats the case then you have to wait to see the changes or the material that you are trying to CIF till the next batch runs through. the steps tht you have described are right
    Create the integration model.
    activate the integration model.
    there are settings in there where you can transfer the data real time also, but i guess your project is not using it.
    Hope this helps.
    Regards,
    Suresh Garg

  • Data Extraction from PDF

    I am creating a large PDF form that people will fill out, save, and return to us. I am wondering if there is a simple method to extract the data from the PDF and store the values in a database (excel or access).
    I can program in java if needed, but I'd prefer a simpler solution if one exists.

    Niall is correct for a direct-connected form. But there are a wider variety of choices that you may want to play with:
    Use the distribute and collect features of forms in Acrobat and Acrobat.com.  This gives an automated way to bring all of the data together for you.  You can see this at http://formcentral.acrobat.com/ or Tools/Forms/Distribute in Acrobat X.
    Directly connect your form as Niall suggested; you'll need to reader-extend with the server product to enable this data access with Reader, or use full
    Gather the data results from form submissions (HTTP post)
    Extract the data out of reader-extended full forms sent back.  LiveCycle has a service called Form Data Integration, but there are also opensource toolkits that can extract the data. Also, LiveCycle (now ADEP) can build full processes around the data, but that may be much more than you are looking for.
    You may want to start with Acrobat.com's capabilities to see if this is sufficient.

  • Microsoft Azure for machine learning on data collected from microsoft spectrum observatory

    Dear Sir,
    Can any one please suggest how shall I apply Microsoft Azure for applying machine learning techniques on spectrum data available from Microsoft spectrum observatory . Please send a mail.
    Regards,
    pavan

    Hi Pavan!
    Apologies, I'm not familiar with MSO - how are you collecting the data provided there? Is there an API? Do you have access to the raw data?
    Regards,
    AK

  • Can we create a pdf using data collected from a forms central form?

    I have a form in Forms Central that is collecting data and I want to take the data and merge the fields into a pdf document with merge fields. Then send the completed merged pdf to someone else automatically?

    Hi,
    Kindly post your query in FormsCentral forums:https://forums.adobe.com/community/formscentral
    Regards,
    Florence

  • Data saved from PDF form printable but not readable?

    I created a Reader extended PDF to send out to clients to collect data.
    I must have done something wrong as when the forms are coming back, they forms are populated in OSX Preview, but not when opening the PDF in Acrobat.
    When the form is printed, all data displays correctly.
    Is this something to do with the way the form fields are formatted?
    any help appreciated!!! Thank You
    FILE IM HAVING TROUBLE WITH
    Running Mac, Acrobat X Pro

    For some reason when I click on the field in Acrobat the data shows?!
    It's actually not printing either unless i print from Mac Preview and then it destroys the line height.
    Any ideas?

  • Can I load data collected from one form, into a new form?

    I have created an Employment Application which collects pre-employment data for our prospective employees. I would like to be able to load that data into an Employee Packet once the decision is made to hire the prospect. Is that possible?

    Are you using a PDF form, and if so, do you have Acrobat?

  • Module for data migration from pdf(zip) to pdf(unzip)

    Hi all,
    I am Working on Data migration using SAP XI with out using IR.
    I want to Zip the pdf file in the Sender CC and unzip the same in Receiver CC.
    I am using PAYLOADZIPBEAN to zip the pdf.
    Did any one work on zipping and unzipping the PDF files?
    Kindly let me know the Module I need to use for the same.
    Thanks,
    Sree

    Hi Sree,
    Please go through this blog and follow the step by step procedure for configuring your scenario.
    /people/stefan.grube/blog/2007/02/20/working-with-the-payloadzipbean-module-of-the-xi-adapter-framework
    Its a nice blog and i have configured my scenario using the same already.
    Thanks and Regards,
    Sanjeev.

  • Data collection from 3 different hardwares

    Hello Friends,
    Actually I want such vi in which = when program starts execution it should record raw data available on GPIB port and then send a command on TCP/IP (i.e., Ethernet card) to move the stage. After movement of stage, it should again get the data from GPIB.
    Now here what actually I want is, How I should write program in which this is satisfied.
    Here I'll require
    Write data to spreadsheet,
    wait for some execution to be done
    Read data from spreadsheet,
    Save both data available before and after movement of stage,
    and accordingly It should plot the graph of both datas.
    Thank you.
    Tanmaya

    Sounds like a case for a state machine architecture.
    http://zone.ni.com/devzone/conceptd.nsf/webmain/c74cec177a289dbd86256c4e00600196
    http://sine.ni.com/apps/utf8/niepd_web_display.display_epd4?p_guid=B45EACE3E1E956A4E034080020E74861

  • Using xml iView to get data from URL generating rss feeds

    hi,
    I have a URL
    http://xml.weather.yahoo.com/forecastrss?p=USCA1116
    from the yahoo weather site.
    It opens XML data.
    I then created an XML iView in the following way:
    In step 3 in XML source; i typed the above URL. Clicked on Next.
    In Step 4 for Selected XML translation format I chose MY_RSS_TO_XHTMLB.
    When I preview it gives the message : Error while using XML iView, please contact your system administrator.
    I have Portal SP14.
    So as mentioned before in a forum, I went to System Administration -> System Configuration -> Service Configuration -> Applications -> com.sap.portal.ivs.httpservice-> proxy
    and changed "HTTP Proxy Host" to "proxy" and "HTTP Proxy Port" to 8080.
    Then to re start I right clicked com.sap.portal.ivs.httpservice, went to Administrate and restarted the services.
    But I still get the same message
    Error while using XML iView, please contact your system administrator.
    Can you please let me know if these 2 settings are correct.
    thx.

    Hi,
    Could you please let me know if you were able to solve this issue. Inspite of all the suggested configuration we are still getting the same error, as stated by you.
    Anyone able to overcome this issue, please reply. Also let me know if we need to consider any specific versions of portal & browser, JRE etc..
    Thanks,
    KSK

  • GAIN PHASE Data collection from HP4194 using a GPIB card?

    I'm trying to collect gain and phase data on a HP4194 using a GPIB card. I'd like to collect this data and run it to an MS Excel spreadsheet. Does any one have any VI's that do this??? So far, I haven't been able to find any commands that read each of the 401 elements to labview.
    HERE'S AN EXAMPLE OF DATA I WANT TO READ:
    http://www.tec.ufl.edu/~shailu/labview/4194a/4-pt/505/II/archive/pxfn1.txt
    Please email me at [email protected], if you have a solution. Thanks.

    That sounds like a bit of LabVIEW coding. Here's some resource that will help:
    -The instrument driver for this device is available at ni.com/idnet.
    -LabVIEW has a WriteToSpreadSheet.vi on the File I/O function pallete.
    -The Programmer's Reference for the 4194 gives the strings to send of the GPIB bus.
    Randy Solomonson
    Application Engineer
    National Instruments

  • Peformance data collection from SUN ZFS storage

    Hi,
    We will be doing a performance load tests on couple of ZFS 7420 soon. what all the performance data needs collected and how?
    I am pretty new with this(SUN) line of products and tools. what will you do in those scenario as performance experts?

    1) It would certainly be faster as it does not have large ethernet/tcpip overheads.
    2) LUNs can be created on the same pool as your existing NAS shares.
    3) You can test out with iSCSI, but performance wise it would be very close to your existing NAS. You might want to try to LACP a couple of network ports dedicated to iSCSI.

  • Getting the data back from pdf form.

    Hi all,
    I am generating a pdf form an ABAP program using the function module- FP_FUNCTION_MODULE_NAME.
    The form is getting generated properly.Some of the fields in thid form is editable.
    I want to get this values back to the ABAP program for further processing.
    Please let me know how this can be done.
    Regards,
    Rupesh R Nair.

    Hi,
    Have you choose your scenario for updating value according to the value set in the PDF forms ( Download, mail ... )
    If you want user send the forms by back mail or by download it thru an abap program let me know.
    Best regards

Maybe you are looking for