LiveCycle virtual machine, Virtualization and support

Depending who you speak to, it is not clear whether or not the virtualization of Adobe LiveCycle in a Production environment is supported?
With the horse power required and cost of the underlying hardware to run LiveCycle, it would seem appropriate that Virtualization would be supported.
Can someone confirm that virtualization of livecycle is supported by Adobe in a production environment.?
If so, is proprietary hardware required? Or can any server hardware (respecting the minimum requirements) be used?
Is a specific VM software required or will any commercially available VM suffice?
Does any documentation exist?  If so, where?
Thanks,

st_bush wrote:
Yes my parallels 9 is now working on Mavericks. However in order to install Parallels 9 I had to delete my Parallels 7. And you are right it was an excel file and it is not on the new Parallels 9 desktop, but that is what it was saved to on Parallels 7. I realized now that I should have backed up my computer before updating it. But I just still had a little hope that I could maybe find that excel file.
Parallels is a program which creates an environment in which an operating system (usually Windows) can run on a Mac. The Windows virtual machine which the Parallels program creates is stored in your Documents folder (Documents/Parallels). When you run the Parallels 9 installer, it asks if you want to remove a previous version of Parallels (that appears to be optional), but if you do, the installer does that automatically; there's nothing that you have to delete by hand yourself. All that gets deleted is the old program (i.e., Parallels 7). Your virtual machine files aren't touched and should still be present in the Parallels folder inside your Documents folder.
What you're calling the "Parallels desktop" is actually the Windows desktop which appears when Parallels starts up Windows; you probably have Microsoft Office installed in Windows, which is what you used to create the Excel file. Assuming you didn't delete that Parallels folder inside your Documents folder, the Windows virtual machine should still be there, with the Excel file still on its virtual desktop. With Parallels 9 running, you should be able to open the Windows virtual machine  that's in that folder and run Windows, and the Excel file should reappear.

Similar Messages

  • Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again.

    I uninstalled all System Center VVM related management Packs, but still received "Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again.".
    Think I got them all. But how can I figure out which Management pack is still installed and has to be removed.
    Thanks for your reply

    Got following logging about this problem.
    9/20/2013 9:35:09 AM] * Exception :  => Microsoft.EnterpriseManagement.Common.MonitoringException: This method from the System Center Operations Manager 2007 R2 SDK is not supported to work with System Center Operations Manager 2012. Please migrate
    to the System Center Operations Manager 2012 SDK.
       at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleIndigoExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.ImportManagementPack(String managementPackXml, String keyToken, ManagementGroup managementGroup)
       at Microsoft.EnterpriseManagement.ManagementGroup.ImportManagementPack(ManagementPack managementPack)
       at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
    [9/20/2013 9:35:09 AM] * Exception :  => Setup encountered an error while importing management packs.Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management
    packs.Microsoft.VirtualManager.Utils.CarmineException: Setup encountered an error while importing management packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
       at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
       at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
    *** Carmine error was: ManagementPackPresent (10208)
    [9/20/2013 9:35:09 AM] * Exception :  => Setup encountered an error while importing management packs.Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management
    packs.Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException: Setup encountered an error while importing management packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs. ---> Microsoft.VirtualManager.Utils.CarmineException: Setup encountered an error while importing management
    packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
       at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
       at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
    *** Carmine error was: ManagementPackPresent (10208)
       --- End of inner exception stack trace ---
       at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
       at Microsoft.VirtualManager.Setup.Wizard.VMInstaller.PreConfigure()
       at Microsoft.VirtualManager.Setup.Wizard.ProgressPage.InstallVm()
       at Microsoft.VirtualManager.Setup.Wizard.ProgressPage.InstallerThreadEntry()
    *** Carmine error was: ManagementPackPresent (10208)
    [9/20/2013 9:35:09 AM] *** Error : Setup encountered an error while importing management packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
    ID: 10208
    [9/20/2013 9:35:10 AM] Information : Virtual Machine Manager Administrator Console installation has failed.

  • Virtual disk consistency error due to the Linux virtual machine virtualization host location ?

    
    Environment
    - windows server 2012 r2 Hyper-v failover clustering configuration
    Installing CentOS 6.5 as a guest OS
    Virtual machine is up on clustering , that information and virtual disk in the CSV .for the virtual machine .
    1 of 1 showed the data virtualization in a virtual machine when there is a CentOS virtual machine on a host , the data of one of the virtual machine does not look after migrating to twice the virtualization host .
    Do you have any experiences you had one of the above ? The workaround ?

    Hi Leon,
    Thank you for your question.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support.
    Best Regards
    Jeremy Wu

  • Automatic Scheduling of Virtual Machine Shutdowns and Start-ups

    Is there a scheduler available to Shutdown and Start-up Azure Virtual Machines?

    Hi,
    Based on my experience, if you shut down the VM within the RDP session, the VM would be in the stopped status and you will still pay for it.
    Do you want to stop it to the stopped(deallocated) status to save money? If yes, you can create schedule tasks with Azure PowerShell cmdlets on your local computer.
    Start-AzureVM -ServiceName xxx -Name xxx
    Stop-AzureVM -ServiceName xxx -Name xxx (VMs would be in the stopped(dealloacted) status)
    Stop-AzureVM -ServiceName xxx -Name xxx -StayProvisioned (VMs would be in the stopped status)
    Please note that if all the VM in a cloud service are in the stopped(deallocated) status, the public IP address would be changed next time you start a VM.
    More information:
    How to install and configure Azure PowerShell
    Start and Stop Windows Azure Virtual Machines
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Hyper-V Virtual Machine memory and OS reboots

    What happens to the physical host memory allocated to a virtual machine when a operating system reboot is performed? Is that memory given back to the Hyper-V host during the os reboot and then re-allocated? Would the behavior be different for VMs with static
    vs. Dynamic Memory enabled?

    If you are referring to the VM restarting then the host OS would get the memory back temporarily. However the restart is so quick that the memory would then be re-allocated back to the VM. 
    The behavior would differ only slightly for dynamic memory VM's in that they Startup memory would be allocated and then after the OS is fully loaded it could grow or shrink.

  • Oracle tuxedo and Oracle tuxedo message queue on top of a virtual machine.

    Hi buddies.
    how is it going?
    A quick question.
    So we are going to go live  using Oracle Tuxedo 12.1.1.0 with Distinguished Bulletin Board Liaison and Oracle Tuxedo Message Queue 12.1.1.0  on top of a Virtual Machine (VMWARE) running Oracle Linux 6.2. However we want to know if there are any recommendations or mishaps in which we may face ahead by running Oracle Tuxedo on a virtual machine?
    I mean, I am wondering if I have to worry about kernel parameters, virtual machine parameters or any other thing from which could mess up everything.
    Another question.
    Does oracle also provide virtual machines certification where Oracle tuxedo would run on top of ?
    Todd Little-Oracle
    Maurice G

    Hi Bruno,
    I'm not sure what you mean with Distinguished Bulletin Board Liaison.  I'm guessing you mean a clustered or MP configuration?  And is it truly a clustered configuration or just a single machine MP configuration?
    Regarding configuration, are you using Tuxedo services as well or just Tuxedo Message Queue?  The biggest issue related to OS configuration is around IPC resources.  If you do a tmloadcf -c on your UBBCONFIG file, it will help you determine the minimum IPC resources required.  In general I suggest configuring significantly more resources than the minimum to allow for future changes and for some of the parameters for heavier loads.  In particular IPC message queue parameters are heavily dependent upon load.  So make sure the maximum message size and queue size are large enough for your anticipated workload.  You can monitor them under load using the ipcs command.
    We don't certify virtual machine environment but support them as long as the VM vendor assures compatibility, which obviously VMware and Oracle VM both do.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Sync folder to and from Virtual Machine

    i have a folder i would like to sync between my windows 7 virtual machine desktop and my mac desktop. i am imagining that what i add to one and/or delete from one would be added to or deleted from the other. same for organizing the files and folders.
    is this feasible?
    is this something for ChronoSync?
    thanks for any advice or expertise.
    - Jon

    Ask on your virtual machine software makers website how to go about doing this.
    I don't let Windows touch my precious, I use a external USB instead, but I know sharing is possible because VMFusion asked me once and I denied it.

  • Is there any report in SCCM 2012 to list out all the physcial machine and all the virtual machine?

    Is there any report in SCCM 2012 to list out all the physcial machine and all the
    virtual machine?
    and list all VMs for each physical server.

    Hi,
    there is no such builtin report but you can easily crete one as all information is in the database.
    http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • 11gr2 installation setup shows error on a Virtual Machine !

    Hi all,
    I have a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit.
    When I install Oracle Database 11gR2 and click on "SETUP" file, a message box namely JAVA VIRTUAL MACHINE LAUNCHER and display below error;
    _"Could not find the main class. Program will exit."_
    Same setup runs successfully on my server with Windows Server 2008 Enterprise.
    Is it 11gr2 supports a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit ? or some other ?
    Please guide me.
    Thanks & Regards.
    Dass,
    Edited by: dassdhan on Jun 4, 2013 1:56 AM

    dassdhan wrote:
    Hi all,
    I have a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit.
    When I install Oracle Database 11gR2 and click on "SETUP" file, a message box namely JAVA VIRTUAL MACHINE LAUNCHER and display below error;
    _"Could not find the main class. Program will exit."_
    Same setup runs successfully on my server with Windows Server 2008 Enterprise.
    Is it 11gr2 supports a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit ? or some other ?
    Please guide me.
    Thanks & Regards.
    Dass,
    Edited by: dassdhan on Jun 4, 2013 1:56 AMOracle doesn't know it's running on a virtual machine. That's the whole idea of virtualization.

  • Creating a Master virtual hard disk and using the same for all other VM's

    Hi,
    We would like to create a master virtual hard disk and use the same for all other VM's. Can we do that ?
    my requirements :
    1) create 10 VM's
    2) first create a master virtual hard disk with win OS and use the same to create the 10 VM's.
    3) After creating the VM's change the HDD size.
                  -- if i have created master virtual disk with 500GB , and use the same for creating a virtual machine. can we change the HDD size to 1TB ?
    After creating the VM's ,i will change the system names and activate the windows accordingly.
    Will there be any implications ,if we can/will do like this.
    Thanks.

    Hi Suren424,
    I think Using Differencing Disks may cover your needs .
    Please refer to following setps:
       "Create the Parent Virtual Machine Configuration and Virtual Hard Disk
        Install the Operating System, updates, and common software
        Generalize the installation
        Prepare the parent virtual hard disk
        Create the differencing disks
        Create virtual machines that use the differencing disks
    For details please refer to follwing link:
    http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parent-child-configuration-using-differencing-disks.aspx
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows server 2008 r2 virtual machine uses much less memory then it has assigned

    Guys,
    I had a virtual machine with windows 2008 r2 operating system, running sharepoint, on a server where it had 6gb RAM memory assigned.
    Now I bought a new server, which has 32 gb of ram. I moved my virtual machine there, and assigned 24gb of RAM.
    But after I started VM, in Windows Task Manager I see that system uses only about 6.5 GB of RAM assigned. That is not even close to 24gb, which it has available.
    Is there any power shell script or anything else available to increase virtual machine memory usage?
    Thank you. 

    Hi,
    I found a KB similar described with your issue- the Hyper-V host cannot allocate more memory to the virtual machine because there is not enough free disk space to extend the
    memory contents file, more detail symptoms please refer the following KB:
    Dynamic Memory allocation in a Virtual Machine does not change although there is available memory on the host
    http://support.microsoft.com/kb/2504962/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Installing Oracle Apps on Linux Virtual Machine, but need patch "6078836"

    Hello Friend's,
    Hope you are doing well...!
    I start my EBS Training in a functional role in less than 10 day's.
    My dilemma is that i am having a heck of a time installing Oracle Apps on my machine. As recommended in many blogs, i've installed a virtual machine environment and then installed Linux Version 5 Update 5. Before i begins installing Oracle apps, the last step is to go to my oracle support "mos" and install patch 6078836, which i can't access. It seems to me as if that one should either have a paid oracle support account or be a part of an organization/company that has one. I can't get past the sign in page to install this patch and no where in these blogs does it say this.
    Does anyone have this patch or has access to it or any knowledge or idea as to where can i find this?
    As a back up i've started downloading Oracle apps for a windows server machine as well, in case i am unable to download this patch at least i have a back up. And the bad thing about this is the fact that i am in India and the bandwidth here sucks even with a 2 MB plan. With these speeds this 50 GB download will take another 3 to 4 days. And time is of the utmost importance for me right now..
    Any help or suggestions will be much appreciated..
    Thank you all in advance and hope that you have a great weekend..!

    Does anyone have this patch or has access to it or any knowledge or idea as to where can i find this?Even though any of us has the patch we are not supposed to mail it as this violates Oracle support agreement policy.
    There is no other source to get the patch and most Oracle patches (if not all) can be downloaded from MOS website.
    As a back up i've started downloading Oracle apps for a windows server machine as well, in case i am unable to download this patch at least i have a back up. And the bad thing about this is the fact that i am in India and the bandwidth here sucks even with a 2 MB plan. With these speeds this 50 GB download will take another 3 to 4 days. And time is of the utmost importance for me right now..
    Any help or suggestions will be much appreciated..We cannot suggest anything about the download speed or the timing, and even if you had a CSI number it would take 3-5 days to get the Media Pack in case you log a SR and ask Oracle support to send you the pack.
    Thanks,
    Hussein

  • How to get Virtual machine reserve (percentage) using WMI

    Hi,
    In Hyper-V, Virtual machine reserve (percentage) shows percentage value In UI
    but Msvm_ProcessorSettingData.Reservation range is 1-100000.
    Why it shows like this???
    How to get Virtual machine reserve and limit value in percentage???
    Pls Help me.....

    Hi VijendraBoopathy,
    I checked the setting of WMI Msvm_ProcessorSettingData , the range of limit and reservation is 0-100000 .
    Please refer to the following link:
    http://msdn.microsoft.com/en-us/library/cc136870(v=vs.85).aspx
    Also we noticed that there is side-note "(percentage)" of limit value and reservation value :
    Based on my understanding of this behavior , this value was converted to percentage by GUI .
    So , if you want to get the percentage you may customize the output to percentage .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Virtual Machine with Adobe Pro 8 Unable to activate.

    I had a physical machine with windows 2K3 and Adobe Pro 8. We ported the physical machine to a virtual machine and now Adobe Pro 8 says it needs to activate again. We tried to activate through the web and over the phone, but we are currently out of activations. The person on the phone says that Adobe Pro or ANY of their products for that matter will NOT work on a virtual machine!!! How ridiculous is that? With many companies going green and going virtual I can not believe Adobe doesn't support virtual machines. I was told to search the web and forums. I have yet to find an answer. So I've decided to post this if anyone has run in to the same problem and if there are any solutions.

    Victor,
    Acrobat most certainly does work on a Virtual Machine (VMware and MS Virtual Server VMs are supported) - I sincerely apologize that you were given incorrect information. We do a large majority of testing and support on VMware-based virtual machines and any issues you have with running Acrobat 8 on a virtual machine should be considered supported.
    Acrobat's licensing will require you to re-activate when you change hardware (which, in effect, is what cloning a physical machine to a VM entails - the virtual hardware supplied by the VM will have a different signature than your physical hardware did). This is why you are being prompted to reactive - it has nothing to do with the VM specifically, the same thing would happen if you ghosted your system onto new physical hardware as well.
    If you can post a way for me to contact you, I will get you directly in touch with the people who can override an activation for you. That way you will be able to use Acrobat on your virtual machine.
    Again, I apologize for you being given incorrect information. The situation is being looked into and new information will be updated to our help desk agents to make sure they are aware of this - thank you for pointing out this oversight.

  • Essbase on virtual machine

    hello everyone,
    can I have an installation of Essbase in a virtual machine?
    And if so it's possible to install on the same machine of Hyperion Financial Management?
    And in case of HFM 9.2.0.1 it's possible to install on windows server 2003 standard edition SP2?
    Thanks

    Is this dev or prod?
    How many users?
    You generally want at least two cores dedicated to every VM you have otherwise you will see some pretty serious performance issues. The last dev VM environment I installed we had 3 VM's and two physical servers
    VM1 - Shared Services/Administration Services/Planning/BI+ Core Services
    VM2 - Workspace/Financial Reports/PDF Writer
    VM3 - HFM/FDM
    P1 - 64-bit Essbase
    P2 - MS SQL 2005 SP1
    A general rule I go by is never make the database machines whether it be relational or multi-dimensional on a VM.
    This being said if you have some really big hardware and can dedicate 3-4 cores to the VM then yes you could have a production environment on VM.
    I would not put HFM/Essbase on the same physical or virtual server.
    If you are installing a new HFM -- suggest you use 9.3.0.1 not 9.2.0.1 -- 9.3.0.1.
    Try logging a support ticket regarding the SP2 compatibility -- install guides only speak about SP1.
    Regards,
    -John

Maybe you are looking for