LiveType Movie not showing up in iMovie

I created a LiveType 9 second introduction then imported the .mov file into iMovie (all looked good on preview), but when I play it back. It does not display the LiveType movie. I went back several times, re-rendered with background, etc. Any clues????

Any solution?

Similar Messages

  • Why do my iPhoto movies not show up on iMovie

    I have imported all my videos from my iphone to iphoto.  I can not access them through imovie but I can see all the photos. Why is this?

    Yes that works - but it's quoite manual, and has a problem -
    1. when I do that - iMovie sets the date and time of the movie to the import date ( today) instead of the footage date, so I have to go through each one adjusting the date and time to the footage date.
    It would be seemless if the Event Library\ iPhoto Videos simply shows the movies that are in iPhoto!

  • IPhoto movies not showing up in iMovie

    I have looked at a few other topics, and I think I have discovered the source of the problem, but I don't know how to fix it.
    I have: iMovie '08 and iPhoto '08.
    I went to QT player and selected "Show Movie Inspector" to look at the format. The two videos that both show up have these formats:
    AAC, Stereo (L R), 44.100 kHz
    H.264 Decoder, 320 x 240, Millions
    and
    AAC, Stereo (L R), 44.100 kHz
    H.264 Decoder, 480 x 320, Millions
    But the ones that DON'T show up have this format:
    AAC, Stereo (L R), 44.100 kHz
    H.264 Decoder, 1280 x 720, Millions
    So I'm assuming the problem is the size of the videos. Is this correct? If so, how can I change them? And if this wouldn't be the problem, does anyone have any other suggestions?

    But in iMovie, only two of these movies show up in the iPhoto videos events. How do I get the third one to show up in iMovie?
    Not sure, but try this: Close iMovie. From iPhoto, drag the AVI movie to the Desktop. This will create a copy on the Desktop. Now drag this file back into iPhoto. You will be asked if you wish to import a duplicate - click on Import. Now open iMovie - hopefully the newly imported AVI movie in iPhoto will now be recognised by iMovie, which will commence creating thumbnails. If desired, you can delete the original movie from iPhoto.
    If this doesn't work, try converting the AVI file to another format. This can be done in either QuickTime 7 or QuickTime X, depending on the conversion required. Open the AVI file on your Desktop (the one dragged from iPhoto earlier) in QuickTime X. If the movie is 640 x 480 go to File>Save As and choose the format HD 480p. That will save the movie in H.264 format using 2 Mbits/s at up to 640 x 480 resolution. If your original movie is in some other resolution, you will probably be given other Save As options, so choose the most appropriate. If you have QuickTime 7, you can export using a much wider range of formats. However, the best to use are AIC (Apple Intermediate Codec) or the H.264 format - both work perfectly with iMovie '09.
    Once you have the exported file (whether from QuickTime 7 or X), import it to iMovie. In iMovie's menu choose File>Import Movies. You should now be in business!
    John

  • My movies are not showing up in iMovie application?

    Hi,
    I just uploaded 5 movies from my camera to my iMac using iPhoto. I can see them all in there. Here is a photo.
    When I drag the movies out you can see in this picture above the iPhoto app (top left). If you notice an older one has the Quicktime symbol and the newer ones have the picture of the video. These do not show up in iMovie and I'm not sure why.
    S.

    There was no option of Movie to TIFF but an Audio to TIFF and other ones. I chose the Movie to Quicktime movie and it didn't work, also tried the audio to TIFF and it didn't work.
    TIFF??? Who said anything about TIFF compression? "TIFF" is a graphic image compression format that will be listed in the option window of the "Movie to Picture" Export pop-up. "AIFF," on the other hand, is an audio compression format that is compatible with iMovie '08. In any case, sorry -- I should have said "Sound to AIFF" here.
    NOTE: It is not necessary to extract the audio to a new player before performing this audio conversion, but I usually use this work flow in case I should do something idiotic and end or accidentally ruining my source file. In addition, if your original audio is mono, you should probably use a mono setting for the AIFF conversion but either will work here.
    After Add to Selection and Scale I assumed I should also go to Edit and click paste which I did.
    If you have the "Properties" window open for your original clip, you will see that the "Add to Selection and Scale" Edit option adds a second audio track to the movie (which then allows you to delete the original incompatible audio track). If you then immediately perform an additional "Paste" action, you will note that the "pasted" audio is added to the end of the track which was previously added by the "Add to Selection and Scale" action and you end up with a clip twice as long with audio repeated and no video for the second half.
    The second one where I chose sound to AIFF would play all the way through fine and then would repeat the whole movie again with only the sound and no picture showing. It wouldn't show up though either when I tried to open iMovie.
    See explanation above for double playback. As to why the AIFF file would not import, did you remember to delete the sound track with the incompatible µ-Law audio? As long as that track is in your clip, it will not import.

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • Imported .mov files not showing up in IMovie

    I downloaded 6-7 .mov files yesterday.   All fairly short 5-10 second clips.  The first 3 imported just fine and showed up in IMovie where I am editing a movie.
    Afterwards, when I selected "import" the computer responded the same way, as if it was importing, creating thumbnails, etc and the video shows up in finder in the right place but it does not show up in IMovie and I cannot use it in my movie.
    I selected "show all clip" and still they do not show up
    I tried importing to iPhoto first and then to iMovie but it still does not show up.   It does the same thing - acts like it is importing, creating thumbnails etc.
    THe first three that I did are still there, just fine. 

    Thanks for responding. These videos were shot on a colleague's camera then loaded to an FTP server for me to download. I have them as MP4s (though I've tried to import them after converting to .mov and .avi, still to no avail).
    I've loaded them into iPhoto, but still nothing shows up in iMovie when I click the "iPhoto Videos" tab. It's like iMovie can't see them, even though I can see and play them when I go back to iPhoto.
    One other point of interest: I tried the same process in my older version of iMovie HD, and there they would load only as audio.
    I'm flummoxed.

  • HT4997 The imported videos by Itone is not showing up on iMovie

    I downloaded YouTube videos by download helper Firefox adds software and then I convert it to MP4 by airvideo apps for ipad. Then I transfere it by I tone as was described on the help section, but still these videos are not showed up on iMovie on ipad. I can see them on Itone but I can not see any video on I movie. What is the reason, how I can solve it. Thanks

    First check Restrictions to see if it has been disabled (Settings/General/Restrictions).
    If it isn't disabled in restrictions it is somewhere on your phone, either on a different page of the home screen or in a folder. If you really can't find it go to Settings/General/Reset - Reset Home Screen layout.

  • Entire frame of mini-dv video clips do NOT show in the iMovie '11 viewer in playback mode

    I am editing a wedding video in iMovie11 that was recorded on a mini dv tape.  When I move video clips from the event library to the timeline, the entire frame is displayed in the timeline.  However, the entire frame of the video clip does NOT show in the iMovie viewer or when I playback the video.  I exported the video and burned it to a dvd using Toast 11 pro.  The video recorded to the dvd as it was showing in the iMovie viewer... the full frame does not show.  I would certainly appreciate any advice as to how to solve my problem.  THANK YOU!!!

    Is your video shot in 16:9 aspect ratio or 4:3?
    You can go to File/Project Properties and set the aspect ratio for the project.
    When you get a clip that does not match the project's aspect ratio, you use the Rotate, Crop, Ken Burns tool on the middle toolbar to specify how it should be treated.
    FIT will place the entire clip in the movie, and will letterbox (black bars) so that it fits.
    CROP will fill the screen, but will cut off the top and bottom of your frame.

  • My iPhoto videos are not showing up in iMovie? I have quit, shut down my Mac and they still are not showing up? What can I do to resolve this?

    My iPhoto videos are not showing up in iMovie? I have quit, shut down my Mac and they still are not showing up? What can I do to resolve this?

    It is also posible to go back to the imovie you had before, it is still on your computer - you go to Finder and it is in a folder in your programs. Many others have gone back to the old program, and perhaps I am also going to do that too.
    In the new imovie it does not come up the question "do you want to download these videos ...."
    You shall in imovie open your iphotolibrary in top on the left side,( it is standing under libraries) and  you can see all the events you have in iphoto, then you can open the event, you shall use and drag the movies and pictures from the events in iphoto to an events in imovie. If you can,t see your libraries, you can click on a show button on top of the left side.
    On the picture you see here iphoto is market on the top of the left side and the pictures to the left is my iphoto-events - and there I can open the one I shall use, and find my movies.
    I

  • My itunes music or play lists do not show up in iMovie

    I have just purchased a new imac and my itunes music is not showing up in imovie.  When I click on the itunes folder in imovie, no songs show up and I get a "open in tunes" message.  Any help would be appreciated.

    Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
    http://www.apple.com/itunes/download/

  • ITunes movies not showing up on Apple TV

    I'm having some trouble with my movies not showing up on Apple TV.
    The movies I am missing are not purchased from iTunes but I have converted them using Handbrake. I've double checked the format and they seem to be what's required from what I've read in other threads.
    I've also made sure they are in the "movies" category and not "home movies."
    I'm not the most computer savy person... most of what I know is just from reading threads.  Can someone help?
    Here is the format of a movie that's not showing up:
    H.264, 720 x 304, Millions
    AAC, Stereo (L R), 48.00 kHz
    Movie FPS: 23.98
    Playing FPS: 23.98
    Data Size: 1.24 GB
    Data Rate: 938.58 kbits/sec
    Normal Size: 720 x 304 pixels
    Current Size: 720 x 304 pixles

    RogerOut makes some good points and this feels to me like a ham fisted attempt by Apple to take control of my media in a way that I don't want.  The stuff it is choosing to call "home movie" is 100% legit movies, but not ones I bought through the itunes store.  So I load a movie and then it mysteriously does not show up in my Apple TV because it has defaulted to "home movie".
    What I still fail to understand is what the heck is the purpose of this apart from annoying users who's stuff now does not appear on ATV without explanation or warning.  So glad to have this forum to help me, but why should I have to do this to figure out how to overcome a stupid thing that Itunes is doing to my movie (it is a movie!)?
    As I say though, what possible benefit is it for a users media to be labelled in this way and anyway, why does calling it a home movie make it unreadable in ATV?

  • I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

    I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like  the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

    Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
    I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
    APPLE. What are you doing?

  • Why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed.

    why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed so this ***** a bit. Also how do I keep this incedent from happending in the future?

    No, this is not the case. I know where i purchased the movie and I also know movies cant be added to the cloud such as music, TV shows can.  The instance happened during the dowload. I think that depending which computer is up and running and the bandwith allocated on either network, which ever computer that finishes first is the one that gets the movie. Just a thought. So next time I will ensure my IMAC is not running. I think that fixes it.
    Thanks

  • HT1657 where does itunes store my rented movie, not showing up in library

    where does itunes store my rented movie, not showing up in library

    On your computer or your ipad?
    Computer - Library>Movies
    Ipad - Videos app

  • IPhoto mov files do not show up in iMovie

    Hi there,
    I know that there are similar cases discussed in this forum, but mine is slightly different, I think...
    Within iPhoto I have imported various mov videos, but they never showed in iMovie while using iLive 09. After the appStore opened up, I upgraded first only iMovie to iMovie '11.
    After this update suddenly all my iPhoto '09 videos showed up in iMovie... that was a positive surprise
    After a couple of weeks, I had enough courage to upgrade iPhoto as well (which was not as effortlessly as it seemed at first, but not as bad as some did experience)
    After this, again none of my still existing mov videos from iPhoto do now show up in iMovie.....
    How is that possible?
    Any ideas?
    Thanks!

    I have a similar problem. I recorded 15 screen captures in MOV format and added them to iPhoto. Only 9 show up in iMovie. I'd love to hear a solution to this problem.

Maybe you are looking for