Livetype no longer shows or renders backgrounds, textures or objects.

After updating to FCP 6.0.3 and Quicktime 7.4.5 Livetype no longer shows or renders backgrounds, textures or objects. Here's a blog of current discussions of the problem.
http://forums.creativecow.net/thread/73/855577
I also have a screenshot of the Livetype canvas with a previously saved project that had a texture in the timeline, but now it only shows artifacting. As you can see below. What's going on??

Will Salley1 wrote:
I think this might answer our questions:
http://discussions.apple.com/thread.jspa?messageID=7235041
Thanks for posting the link, very helpful, but I've got to disagree with your previous addition:
I have an identical issue so it's not an isolated incident.< </div>
Blackmagic is not mentioned in the OP. Weird hardware often expresses itself in weird artifacts. These are rarelyr the fault of the apple application, it's the hardware mfr that has failed (maybe because Apple has failed to get them the tools) to update their systems and make the updates available ot their users and for the suers to install them.
bogiesan

Similar Messages

  • Albums no longer show up in itunes and screensaver/background control panel

    As of a day or so ago I am not longer able to update my pics in itunes as itunes no longer shows my albums in the ipod section of the preferences. Also I no longer see my albums for screensaver in the screensaver pane of the control panel. It seems these two are interconnected. I have tried removing the prefs and am getting nothing. Maybe export the library and reimport fresh?
    Newest versions of all software installed.

    macona:
    Welcome to the Apple Discussions. Even though you've tried deleting the preference files try the following:
    1 - delete the iPhoto, iTunes and screensaver preference files. The screensaver files will be in your Library/ByHost folder. There may be at least two files with screensaver in the name.
    2 - run Disk Utility and repair disk permissions.
    3 - run Cocktail and delete the various use caches and run the cron scripts (in the Pilot section)
    4 - launch the applications in the following order: iTunes and then iPhoto
    5 - now try to reset the screen saver.
    Do you Twango?

  • CCTV DVR No Longer Showing Images On IE9

    Hi there,
    I hope someone may have an idea as to what may be causing the below issue.
    Our business has a CCTV DVR that we have been using via Internet Explorer successfully for over 12 months now.
    However, since updating to IE9 on a few of our Windows 7 machines the images will no longer show, we can log into the DVR and all of the interface shows correctly it is just the camera images that will not show.
    We have had success on only one PC using IE9, the difference being is that this PC uses Vista business and has an ATI graphic card (all the others that will not work have Nvidia cards including one Vista Ultimate machine)
    As a test I formatted one of the Windows 7 machines and reinstalled Windows 7, then drivers etc before installing IE8.
    I then logged into our DVR successfully and all the camera images streamed ok, after this I updated to IE9. When logging into the DVR now with IE9, again no images stream. The Activex is installed correctly and running or I would assume so as all the interface
    loads and comms commands work (retreiving settings, copying footage from the HDD etc).
    When we first got this DVR we did have this same problem and after speaking to technical support they got me to run dxdiag which shown that Direct Draw was not available, they advised me to update the display drivers on the PC which cured the issue (direct
    draw then shown enabled and images streamed).
    Although I would have thought display drivers would not be the issue as IE8 works ok updating them was one of the first things I did after the issue first appeared on IE9.
    I have been in contact with manufacturer and they have said they will look into it but I just thought I would ask here incase any of you knowledgable folk may know what could cause this.
    I realise this may not even be something to ask here also, it may be better answered on the Nvidia forums I just dont know.
    The manufacturer has an online demo of the same DVR on their website so if any of you would like to see exactly what I am talking about you can visit this link: http://www.symphony-dvr.com/sections/demo/instruct.php
    Just to recap and give you a bit more info on each PC here are the operating systems and graphic cards installed, all drivers have been updated:
    Windows 7 Ultimate 32-bit - Nvidia Gefore 6200
    Windows Vista Ultimate 32-bit Nvidia Gefore 6200
    Windows 7 Ultimate 64-bit - Nvidia Geforce 8800GTS 512MB
    Windows 7 Ultimate 64-bit - Nvidia Gefore 8800GTS 320MB
    Windows Vista Business - ATI Radeon 4600 (Only Working Computer)
    Thanks for any help and if there is any more info needed just ask

    Hi,
    Thanks for the post!
    In certain cases with some graphics card, Internet Explorer 9 may have performance or fidelity problems when drawing webpage content. You can try the following method to check if it works.
    Open the Internet Explorer 9, press Alt, click Tools - Internet Options.
    Click Advanced Tab, check the box "Use software rendering instead of GPU rendering".
    Meanhwile, please also ask this question in
    NVIDIA Forum since you mentioned update the driver fix part of the issue.
    Regards,
    Miya
    Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

  • My LiveType have no textures and objects! Please help me! Thank you!

    Sorry to trouble, thank you for taking your time to reply me =)
    I just bought my Mac OS X 10.5.4 Leopard not long ago. And today is my first time using LiveType on my laptop. I've learn how to use LiveType in school before, but i just found out that my LiveType have no textures and objects. Can anyone tell me how to get it and get it more ? Where to get it for free ?
    Thank you

    If you have Final Cut Studio, there are two extra disks labelled "Live Type Media".
    If you have Final Cut Express, Look on your Installer disk, the media files should be on there.

  • My lock screen just shows a black background and a User Name/Password dialog after opening the screen from sleep. How do I get it back to where it blurs my desktop image with the dialog and my account image displayed?

    I'm not sure when it began, but now my Macbook Air only shows a black background and a User Name and Password dialog box when I wake it from sleep. It used to show my desktop background blurred with my user name and icon displayed with only a text field for entering my password. I'm currently using Yosemite (OS X 10.10.1) and all updates have been done. Any help or suggestions would be greatly appreciated as I know this isn't a real problem, just an annoyance since I couldn't find how to change it back in the System Preferences.

    I just have to point out that after looking at a related post (https://discussions.apple.com/message/22661092#22661092), it brought to memory that my issue most certainly began happening after I added some DoD certificates to the keychain. This obviously has something to do with it, but it still leaves me wondering what actually causes this to happen. :/

  • XP no longer shows up as a startup disk

    After upgrading to leopard today, my XP partition no longer shows up as a startup disk.
    I had/have my windows partition on it's own drive that was NOT created with bootcamp. I pulled my osx disk from the my mac pro and installed windows on the disk i had in bay 2 using 100% of the disk (ntfs). after installing the bootcamp windows drivers, i reinserted the osx disk and all has been well for the last 4 months,... until the upgrade today that is.
    Now, when i go to the 'Startup Disk' preference Windows is no longer an option. the disk still shows up in Finder and I can navigate around the file system.
    Anyone have any ideas on how I can get it to show up again? I'd really rather not have to reinstall if i can avoid it.
    thx.

    I have exactly the same problem (well, maybe).
    I have installed MacFUSE and ntfs-3g. I don't know if this is of any relevance, because I don't know if it was working directly before I installed them.
    I have my OS X and NTFS volumes on the same physical disk. I also had to install Windows twice because I buggered it up the first time (formatted the partition as FAT32 and ran into a bunch of disk errors).
    I also notice that in WinClone I have 2 Untitled Volumes at /dev/disk0s3 and /dev/disk1s1. /dev/disk0s3 seems to be the legit Windows NTFS partition, but I have no idea what /dev/disk1s1 is about. I don't know if it's been there all along or not but perhaps it is confusing matters and stopping the legit Windows volume/installation from being detected...? Should that second volume exist at all? It doesn't exist according to the Disk util.
    edit: I used fdisk just to have a look at the two untitled partitions.
    Jacbook:dev jacteh$ sudo fdisk /dev/disk0s3
    Disk: /dev/disk0s3 geometry: 10651/255/63 [171117408 sectors]
    Signature: 0xAA55
    Starting Ending
    #: id cyl hd sec - cyl hd sec [ start - size]
    1: 72 368 111 45 - 371 101 51 [ 218129509 - 1701990410] <Unknown ID>
    2: 74 67 115 32 - 299 114 44 [ 729050177 - 543974724] <Unknown ID>
    3: 65 114 111 32 - 353 115 52 [ 168653938 - 0] Netware 3.xx
    4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    Jacbook:dev jacteh$ sudo fdisk /dev/disk1s1
    Disk: /dev/disk1s1 geometry: 0/4/63 [63 sectors]
    Signature: 0x0
    Starting Ending
    #: id cyl hd sec - cyl hd sec [ start - size]
    1: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    I can hold the option key upon startup and manually enter Windows like that, but I'd prefer to be able to restart and boot Windows without having to hold a key.
    Apart from not seeing the Windows boot volume in the system prefs pane, Boot Camp (and the rest of Leopard) has been excellent. I am impressed at the level of apple hardware support for windows. It seems to be much better than most native PC hardware.
    I am dying for an answer. It's a fairly minor problem in the grand scheme of things, but **** it's frustrating.
    Message was edited by: jacteh

  • Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune

    Mac OS X 10.7.5
    I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
    It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
    Here is the information from the Partition Inspector:
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640   1151635239  Mac OS X HFS+
    3     1151635456   1152904991  Mac OS X Boot
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1       409639  ee  EFI Protective
    2         409640   1151635239  af  Mac OS X HFS+
    3     1151635456   1152904991  ab  Mac OS X Boot
    MBR contents:
    Boot Code: Unknown, but bootable
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Mac OS X HFS+
    Listed in MBR as partition 2, type af  Mac OS X HFS+
    Partition at LBA 1151635456:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 3, type Mac OS X Boot
    Listed in MBR as partition 3, type ab  Mac OS X Boot

    Hi Eric,
    Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
    The following information is available:
    Mount Point: Not mounted
    Format: Windows NT File System (NTFS)
    Owners Enabled: -
    Number of Folders: -
    Capacity:  274.55 GB
    Available: -
    Used: -
    Number of Files: -
    What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
    Should I clone the hard drive in the target disk mode??
    I'm not the best at this stuff so any more advice would be greatly appreciated!
    Thanks!

  • IPod Touch no longer showing up under My Computer

    My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it.
    It works in iTunes just fine, syncs fine, etc.
    If I go to Devices and Printers, it used to be listed under the Devices category as iPod, but now shows under the Unspecified category as Apple Mobile Device USB Driver, so basically a generic device.
    I have no devices with exclamation points or any other trouble signs under Device Manager.
    Help?

    Well, I am not entirely sure what exactly happened but after trying numerous times to reinstall the drivers and getting all sorts of error messages, I finally got Windows 7 to cooperate. The iPod Touch now shows up and is being detected as a digital camera under Devices, and under Computer it is showing up under Portable Devices. If I double-click on it I can view my pictures, transfer them, delete them, etc.

  • Status page in X3000 no longer showing any data.

    Using the latest 1.0.05 firmware on X3000
    Status page perpetually shows "Connecting" even though I'm connected.
    It no longer shows data such as the Internet IP address, Gateway etc.
    Only DNS IP addresses are shown.

    Hi, 
    Try to turn off your X3000 for around 60secs then check again. If it's doing the same issue after doing a powercycle, you may have to perform a hard reset then reconfigure your router.
    If everyone needs to believe in something, I believe I'll have another beer..

  • Ipad app store no longer shows updates

    ipad app store no longer shows updates. was working fine until a couple days ago - whwt can I do?

    If you are getting the blank app update screen, many people are having this problem over the last couple of days.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • On Windows Server 2012 R2 the "Show my desktop background on Start" is grayed out

    Hi
    As shown below, the new 8.1/2012R2 function "Show my desktop background on Start" is not available on Windows Server 2012 R2.
    I have tried multiple solutions:
    - Activate OS (In Win 8.1 - the feature is unavailable when Win8.1 is not activated)
    - Install Desktop Experience
    - Playing with the registry key "Subkey: HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Accent Entry:
    MotionAccentId_v1.00
    But no luck. Does anyone have a solution.
    The reason why I need this is, that I am building a Remote Desktop solution, and here we want to give users the same experience as from their desktops.
    Looking forward to some exciting feedback.
    Regards,
    Mr. Thomas

    Hi,
    I am trying to involve someone to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support.
    Jeremy Wu
    TechNet Community Support
    Jeremy,
    I, too, am facing this issue.
    Do we have any update on this?
    With regards
    With regards

  • On Windows Server 2012 R2 the option "Show my desktop background on Start" is disabled

    Since this thread is
    inactive, I am starting a new one.
    On windows server 2012 R2, under the taskbar properties, the option to display desktop background on start is disabled and I have not found a way to enable the same.
    Please suggest, how this can be enabled.
    With regards

    You should take a look at this thread. They still haven't figured it out yet though, I don't believe it is possible at the moment on server 2012 even with desktop experience installed.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/9e26b0d5-e586-45b6-91bf-540a72dd36fc/on-windows-server-2012-r2-the-show-my-desktop-background-on-start-is-grayed-out?forum=winservergen
    http://WrinkleFreeIT.com/

  • My MacBook Pro no longer shows up on my devices how do I add it back

    Hi,
    My MacBookPro no longer shows up on my devices that is associated with my AppleId. Any suggestions? I did go to ITunes and follow the instructions on how to add and delete but it is not giving me the option to add.  Just had new hard drive installed and restored from time capsule without any other issues.
    Operating system is 10.9.4., Processor 2.7 Ghz Intel Core 17, Memory 16 GB, 1333 MHz DDR3, Storage 526.65 Free out of 999.35 GB. and I did not update to OS X Yosemite. (Because I've heard negative things about IPhoto and I'm working on several photobooks right now.
    Not sure if any of the information about my laptop is needed or useful, but thought it may be so am trying to be helpful.
    Thanks - ANY feedback is much appreciated.
    Frustrated mommy

    Hi there,
    When you say associated devices - are you referring to authorized devices within iTunes (i.e. devices that are able to access your iTunes account)? Or do you mean your registered devices when you log into your Apple ID on Apple's website?

  • I have a Rocketfish mini display port to VGA adaptor cord for a macbook pro, it was working fine the first week, now it does not show what I am seeing on my laptop on my lg Flat screen tv. It only shows the space background but not any icons. Any help??

    Is there anything I should do to the TV or any settings i should do from my actual Macbook? It only shows the space background but not any of my icons or what i am seeing on my laptop screen. It is a new adaptor which was purchased last week.

    It seems as though though it may be a connection issue, possibly hardware or adapter. Make certain the connections are TIGHT.
    For software you may try a smc reset:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Try a pram reset:
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.
    If no joy you can take it in to an Apple store genius bar for a free evaluation make an appointment first.
    http://www.apple.com/retail/geniusbar/

  • My WD external hard drive will no longer show up on my Macbook pro.

    My WD external hard drive will not longer show up on my macbook pro.  The light turns on and you can hear it running but it won't show up either in finder or in the disk utility.  This happened a while ago but I really want to get all my photos off the hard drive.  Is there anything I can do to get my computer to read it again or get my data off of it?
    I don't have access to another Mac to test it. 
    Thank you

    dead sata bridge card. very common problem.
    see all about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    verify HD on another Mac however, if same, dead SATA card most likely

Maybe you are looking for