Livetype to External NTSC Monitor

Is it possible to view Livetype 1.2 on an NTSC monitor?
Thanks,
Jon

If your camcorder doesn't support analog-digital passthrough, you will need an analog-digital converter like the Canopus ADVC-110 to connect your NTSC monitor to your Mac. You'll connect via FireWire from your Mac to the converter, and analog (composite or s-video + audio) from the converter to your NTSC monitor.

Similar Messages

External NTSC Monitor - 4:3 and 16:9 Question

I'm trying to find a configuration setting in FCP 5.0 when outputting to an external NTSC monitor that will force the image to "letterbox", rather than crop to 4:3.
I have a nice Sony NTSC monitor, but it's not the model that allows switching between 4:3 and 16:9 aspect ratios, unfortunately.
I don't want to have to replace this monitor at this time.
I see in the latest version of After Effects I can force the image to "letterbox" in the external monitor. I tested it, and it works perfectly.
Ironically, PhotoShop CS3 does NOT allow you to letterbox your preview to an external monitor. A widescreen formatted file appears cropped in my monitor.
So, my question is can I do this in FCP 5.0? Why am I stuck with a cropped image from a 720x480 aspect ratio? Is there a setting somewhere that will force the preview to letterbox on my monitor?
On a similar note, what will we use to replace NTSC monitors if you're shooting and editing HD?
Thanks so much.

FCP will not unsqueeze the image for you...you need a monitor that has this option.
what will we use to replace NTSC monitors if you're shooting and editing HD?
And HD monitor. But then you need some sort of HD capture card or output device (unless you are working with DVCPRO HD)...even HDV. And then you will need an HD monitor. The cheapest solution might be the Decklink Intensity and small HDTV...the intensity has HDMI out. But this only works if you have a MacPro. The MATROX MXO is next, and it connects via DVI. It can output a signal to an HDTV (component), or to an Apple Cinema Display or Dell 24" Display. That gets you broadcast quality on a computer monitor...believe it, or not!
http://library.creativecow.net/articles/ross_shane/MXO.php
Shane

External NTSC monitor setup

When I use an external NTSC monitor connected to an Apple DVI to video adaptor then to a Radeon 800XT video card I have many crashes. It seems like these are caused by the External monitor setup. I would to know what sort step up others are using for external video. And what kind of success you are having with them.
Thanks
Ken

I to have had the same problem, in fact, I just posted about it a few days ago. Hopefully Apple's monitoring this forum and looking at the issue. The only solution I've found is to disable the external preview, which is quite frustrating. Just a question have your crashed happened while you're working or when you perform application switching. I've only had problems when I apple-tab to another program and then do the same to get back into Motion.

IMAC output to external NTSC monitor

To see FCE video and audio files from an iMAC on an external NTSC monitor, what is the best way to set this up?
What video/audio convertor boxes are used?
Bill

If your camcorder doesn't support analog-digital passthrough, you will need an analog-digital converter like the Canopus ADVC-110 to connect your NTSC monitor to your Mac. You'll connect via FireWire from your Mac to the converter, and analog (composite or s-video + audio) from the converter to your NTSC monitor.

Playback on External NTSC Monitor

My deck in my non-linear editing system is the Panasonic AG-DV2500. I have always had an external "client monitor" which was a Sony NTSC studio monitor hooked up to the "output" of the deck. This time, I have one of the Sony LCD studio monitors. When I capture, the video in the capture window is in sync with the NTSC monitor. But when I put the captured video on the timeline and play it, the video and audio is out of sync on the external NTSC monitor. What am I doing wrong? There has always been a slight delay between the playback window in Premier and the external monitor, but not like this!

I guess it's more accurate to say that there is a dramatic delay in the video between what I'm seeing in the playback window on my computer monitor and what I'm seeing on the external NTSC monitor. The audio does not have that delay, so on the external monitor the audio and video are out of sync. It makes it difficult to show anyone what you're working on, which is what the "client" monitor is supposed to do.

Can I use a Dell W3706MC 37" LCD HDTV as an external NTSC Monitor?

Hello,
I was considering buying this dell TV as a second monitor for my studio as i mostly do audio post production and score music (this size monitor would be excellent for working on scores in my case) on a full time basis but I am expanding into film editing as well.
My question is can i use this as an external NTSC monitor for FCP 4.5HD and version 5? Any help would greatly be appriciated. You can view the tech specs of this TV at http://www1.ca.dell.com/content/products/productdetails.aspx/lcd_w3706mc?c=ca&cs =CADHS1&l=en&s=dhs
Best Regards,
Leon Thomas
MSD Studios
Power PC G5 Mac OS X (10.3.9) 1.8 GHz, 1.5Gigs Ram, 160 Gigs Internal HD

While it might be fine for corporate video or other non-broadcast work, it won't be appropriate for broadcast work. For that you need to buy a broadcast monitor.
The reason is that if you take 20 TVs of various models, and put them side by side (say you went to Circuit City or Best Buy), you wouldn't see the same image twice. They all would be slightly different. Even if you calibrated them, they might all look slightly different. But put 20 broadcast monitors side by side, all calibrated, and you will see exactly the same image and color representation.
Shane

Viewing on external NTSC monitor

Here is my setup, I have a Dual 2.7 GHz G5 with a X800XT 256 MB video card with ADC and DVI outs. I had an older card in there with 2 DVI's connectors and one of them had a DVI to Video Adapter to the NTSC and all was fine.
When I got the new video card I had to plug the LCD into the DVI connector and I installed an older ATI Radeon PCI card to runt he NTSC monitor. Not sure what model the the older card is but it does have an svideo out and DVI out. I have tried with the NTSC monitor plugged into the DVI connector with the DVI to Video adapter and plugged directly into the svideo out. Plugged into the DVI and adaptor the video is distorted and unusable plugged in directly to the Svideo port the video works fine but I can't get Final Cut or anything else to recognize it as the NTSC video out device.
My thought is that either the PCI card I have is too old for the Apps to recognize it, or that the Apps with only work with the primary AGP graphics Card.
Has anyone else had this problem? and is there an easy solution?
I have a ADC to DVI adaptor on order to give my new video card dual DVI outputs hopping that will fix the issue.
thanks
Ken

Easy solution...don't do this. Route the signal thru your deck or camera:
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Final Cut Studio 2 and External NTSC monitor

Hello.
I just purchased the imace 20" 2.4 machine. It's still in the box as I'm getting all my old files off my pc (last one, this makes me all mac!).
My question is this. I have final cut studio 2. What I want to do i use the mini-dvi output to go to an NTSC monitor for final Cut playback.
I haven't been able to find a solid answer on this. I know I can get another external VGA/DVI monitor and it would be work, but I need to use an NTSC (4:3) monitor for some projects.
Is this possible?
Thanks!
Bobby

Well, you can't use the file he sent unless you upgrade. But if you get the card dumps back, you should be able to LOG AND TRANSFER to ProRes on your system fine. Or was that the issue? They had garbage at the end?
Trashing preferences fixes a lot of FCP oddities.
Shane

How can I view on external NTSC monitor in PRCS6?

NOTE: I've aksed this quesion before on this forum and followed the kind suggestions given, however, I have not yet been successful. Note that I can view my timeline on my external broadcast monitor just fine in FCP .. anyone??

Hi Steven,
Thanks for jumping in.
I cannot find "Enable Transmit" anywhere under any menu ... just for clarity, I have CS6, not PRCC.
As a side note - not sure why this should be an issue at all, and why it is not readily explained by Adobe ... there does not seem to be any aswers anywhere from Adobe, or online also for that matter. Seriousely, anyone who's an editor is going to want to view their work in an extenral NTSC monitor, and not on the computer display ...
Many thanks

External NTSC monitor viewing?

I have an NTSC monitor hooked up to my JVC mini dv deck for use with FCP. Plays back fine in FCP. How do I configure so I can see it when working in DVD Studio Pro? Simulator is all I can figure out.
Thanks!

there is no facility to monitor using an NTSC or PAL monitor in DVDSP
only work around is to burn a test disc and play back in a DVD player

Problems viewin external ntsc monitor

I can only view the external monitor when I use the print to video function. When I'm editing there is no video showing on the external monitor. The video out is set to Apple Fire wire NTSC. I am using the ADVC-100 as the conduit to the monitor. I have tried both DV-NTSC and DV-NTSC- Firewire Basic in Easy Setup.
Please help
Thank you

Make sure you have the setting correct on the box. It should be recognized any time it is connected. Trash your preferences and set it up correctly. Use the DV Converter setting, none other.

Hot To Monitor video from FCP on an External NTSC Monitor

Can someone point me in the right direction?
Is there a tutorial on setting-up for monitoring your finish work to an external monitor?
I saw it somewhere a while ago, but can't remember the link
Any help would be helpful
thank
Ron

I'm guessing you mean 'How' To...
This may not be the way you want to go with your setup, but it works well for me.
I have a Canopus ADVC100 that I purchased at a reasonable off eBay. The newer version is:
http://canopus.com/products/ADVC110/index.php
Not only can you monitor while editing, but you can capture from any video device (digital or analogue) as well as export to any device..
Nick. . .
G4 PowerBook 768Mb & QuickSilver 1.5Gb (FCP 4 & 5 _ DSP 4) Mac OS X (10.4.7) Linux and Wimpdows

Installed 10.5 and my NTSC monitor no longer displays In Final Cut Pro

I have been working on a movie project for over a year, and have used an external NTSC monitor via the S-Video cable adapter for the ATI Radeon X1900. It has worked perfectly, until I installed 10.5.1. Now it displays the desktop. All of my other windows within Final Cut work as they always have, and I've tried setting the "mirror on desktop" setting every way it can be set up, and so far nothing has worked. I can move the canvas window over to the secondary montior and it displays fine, so I know the display is "working." I have installed a firmware update for the Radeon card, and I have also updated my Pro Apps.
Any ideas?
Thanx!

In answer to your questions:
I updated to access better pathways in the hardware (i.e., I was under the impression that my system would work faster than before, and when working on films, faster is always better). Also, the project was supposed to be done. I felt this would be an advantageous time to do so. As it happened, the director decided to shoot new footage.
I have only just been able to purchase more drives, so no to the cloning question.
In this case, I did an upgrade install, and also upgraded the Pro Apps when that update became available.
If I may say, please post something useful, rather than "maybe you shouldn't have done this." I am looking for answers, not criticism, and if I could undo what I've done easily, I would. I have over twenty years experience in Macintosh hardware and software. My feeling on this particular issue is that if Apple only sells one video card that is compatible with an S-video output, then their video/film editing software should continue to work with it, even if that software is updated.

Problems with FCP playback on external LG monitor

I have just purchased an LG 22EA63 external monitor to use with FCP 7. Monitor connects fine, works ok with other programmes but once in FCP , when i transfer both canvas and viewer windows onto the monitor, playback in not smooth with flickering streaks as if the footage is interlaced (even though my current project only has progressive footage). However it gets even worse with other FCP projects that contain interlaced footage - playback on canvas is even more jerky and streaky, and the viewer window is unable to play back most alterations made to clips (especially anyhting to do with motion or speed), making clips jaggered and unwatchable.
Any ideas what the problem is? I'm assuming it is to do with the LG screens' native resolution which is 1080p , but that doesn't explain why it is failing to play progressive clips at full quality.. Also I couldn't find another resolution setting that worked.
I am connecting via HDMI to a MacBook Pro (2.8ghz Intel Core Duo, NVIDIA GeForce 9400M, native screen res: 1440x900).
Obviously if I cant fix this I'll have to take the monitor back, any ideas or advice would be much appreciated.
Thank you!

I guess it's more accurate to say that there is a dramatic delay in the video between what I'm seeing in the playback window on my computer monitor and what I'm seeing on the external NTSC monitor. The audio does not have that delay, so on the external monitor the audio and video are out of sync. It makes it difficult to show anyone what you're working on, which is what the "client" monitor is supposed to do.

NTSC Monitor

Can I use the Apple Mini-DVI to Video Adapter,
Part Number: M9319G/A, and set FCP Audio/Video Settings to view the canvas on an NTSC monitor?

The digital to analog conversion that takes place in most camcorders, VTRs or converters is pretty much the same - the quality difference would be the same.
When you set FCP to view "External Video," you're seeing the output of FCP's Canvas or Viewer (depending on which is active). You will not see unrendered clips unless they'll play in RT .. if they are unrendered and playback in RT, you'll see the unrendered version. You will not see what something might look like - such as MPEG-2 encoding ... Firewire output isn't a crystal ball.
Keep in mind that FCP's Canvas window only displays a proxy of the full quality, which is another reason to be viewing on an external TV monitor.
-DH

Livetype to External NTSC Monitor

Similar Messages

Maybe you are looking for