Liveupdate2 crashes in WinXp pro and Neo-fis2r

When I install liveMonitor with liveupdate 2 it will crash after the reboot, stating that the hardware monitor cannot be initialized and that there are errors. After I click these error messages away it just reboots.
I tried admin account, still same error message, but no reboot! And when I deinstall Liveupdate 2 again, the corecenter won't work anymore either!
NOTE: at this point all other drivers are already installed (ie. Soundblaster etc.), including MSI corecenter and the infoviewer.
I have a brand new PIV 2.8 ghz, msi Neo-fis2r, SB Audigy 2, 120 Gig HDD, Toshiba DVD SD-1502, 512 ddr ram.
Is anyone familiar with WIN XP or this problem? Could use it... THNX!!!

Quote
Originally posted by zcbtv02
When I install liveMonitor with liveupdate 2 it will crash after the reboot, stating that the hardware monitor cannot be initialized and that there are errors. After I click these error messages away it just reboots.
I tried admin account, still same error message, but no reboot! And when I deinstall Liveupdate 2 again, the corecenter won't work anymore either!
NOTE: at this point all other drivers are already installed (ie. Soundblaster etc.), including MSI corecenter and the infoviewer.
I have a brand new PIV 2.8 ghz, msi Neo-fis2r, SB Audigy 2, 120 Gig HDD, Toshiba DVD SD-1502, 512 ddr ram.
Is anyone familiar with WIN XP or this problem? Could use it... THNX!!!
Well, I have the problems like yours. After long time researching. I find out that both programs (corecenter and life update) have services that need to be started before loading the corecenter program and life monitor.
So what i did was just remove it to be auto load at windows startup. but instate, wait till all the windows fully loaded then only load those program.
Good luck.

Similar Messages

How can I share data between WinXP Pro and Mac OS 10.8.3 via wifi

How can I share data between WinXP Pro and Mac OS 10.8.3 via home wifi.

MartyP wrote:
Or is there a problem with both OS's writing stuff to the
~/Home/Library folder that may be incompatible?
Yes, big time. Mail, for sure, has a different file/folder structure, and would not be happy.
Plus, a number of apps (Apple and 3rd-party) are "Sandboxed." That's a security feature, to prevent malware or bad coding from affecting things it shouldn't. Some of their files, including the preferences files, aren't even stored in the same places!
Or to other places I'm not aware of?
Probably. If you have two versions of the same app, they may or may not expect the same data setup.
To have one User folder for both OS's would save a lot of drive space
Not if you use some or all of woodmeister50's suggestions.
But I'm also not sure how I'd use Time machine with such a set up.
Just as you do now. By default, Time Machine backs-up everything (except things like system work files, most caches and logs, trash) for all users and all internal drives & partitions. By default, it excludes external drives.
You can change those defaults, of course, via TM Preferences > Options.
See Time Machine - Frequently Asked Question #32 for details and considerations of multiple drives.
Presently I backup with . . . clones to other HD's
Good. Yes, clones are different. You need multiple "tasks" to back up multiple drives/partitions. But once set up, that shouldn't be a big deal.

RAM and NEO-FIS2R

Hello,
My first time here, and i've read through a large portion of the already available posts, but nothing so far have i found to solve my problem.
I recently bought the MSI NEO-FIS2R board along with an Athlon64 3200+. I also purchased 1gig (2x512) Kingston HyperX PC3200, ECC Registered. I cant for the life of me, get it to boot with both DIMMs installed, either work, but not both.
I've toyed with timeing and bus ect per the posts on this board, but nothing so far. Anyone with some specific advice?
Thanks in advance for the help =)

hi
i havent got an msi motherboard but an asus.
I recently bought 2x 512 400 ddr from Corsair and the system only loads up with one stick and not the other. Tied to do lot of combination by putting in slot 2 and 3 etc put with no further sucess.
In fact some motherboard like mine do not recommend these types or ram memory so i had to get a refund.
is this ram is supported by msi motherboard?
see you

BIOS Compatibility between WinXP Pro and Vista Home Premium

I want to install WinXP Pro on my pc. I have a Desktop 3000 J115, Model 7387-A11 and it came with Vista Home Premium. I want to make sure that the BIOS can support either OS. If it cannot, I would like to know how to get the correct BIOS. I realize that there may be a few BIOS settings that are different between the OS's.
Thanks

This is not a right forum to post this problem. You should post it in Database General Forum.
I've Windows Vista Home Edition 32 bit.
In my laptop it is running but screen resolution changes to basic colour. Due to this, some graphical distortion occurs in few places. Also, refresh in the query grid needs to be perform when you are scrolling SQL Developer data from top to bottom or vice versa.
Regards.
Satyaki De.

Nvidia CUDA driver update fixes crashes for Premiere Pro and other applications

We are seeing reports that the CUDA 5.5.47 driver update released today addresses the crashing problems introduced by the CUDA 5.5.43 driver update in Premiere Pro and other applications. So, if you have an Nvidia GPU, please update your drivers to use the most recent version of the CUDA driver.
Thanks!

It should be added that only Macs and Quadros need the CUDA driver. That is not required for use with GeForce cards on Windows.

Motion 3.0.2 Keep crashing on Macbook Pro and Mac Pro without any reasons.

We have a Mac Pro with FCS 2 and I have a Macbook Pro with FCS 2 installed too.
Motion 3.0.2 keep crashing on both machine, and the frequency of crashing in the Macbook Pro is much higher and unpredictable.
I have done a clean installation of OSX Leopard and FCS 2 on both machine and all the software on both machine have been updated to the latest version.
I have Macbook Pro with 4GB of RAM and both machine are working in PAL SD format.
I have not done anything complicate on both machine. I just try to do some vortex behavior, some simple particle test with rate set to 10-20.
Oh! Both of them crashes too even when I using the templates come with the system, and the MBP crashes much more than the Mac Pro, but again both crashes to a frequency unacceptable to be used as a production machine.
Any hints and help will be very appreciated.

Hi jashpal,
If you are currently having FaceTime issues with your Mac, you may find the troubleshooting steps outlined in the following article helpful:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Regards,
- Brenden

Constant crashing with Logic Pro and Vienna Inst

I saw somewhere on the forum (but can't find it) a string regarding constant crashing of Logic Pro using Vienna Instruments (Special Edition). I'm experiencing 2-5 minutes of work time and then a crash - quite regularly. I also saw people point to Mac OS 10.4.9, which I also have - has this been identified as the culprit and have any fixes been offered?
Help!

Actually it's more like 1-2 minutes - sure seems coincidental to having downloaded 10.4.9 - anybody got any suggestions out there? This is killing me.

Crashes with Mac Pro and Wacom Cintiq?

Anyone else here running a Mac Pro with a Wacom Cintiq? I am having issues with this configuration since I updated to 10.5.3. Mac OS X would crash while I am using the Cintiq.
I have an 8-Core Mac Pro (Early 2008) with the stock ATI Radeon HD 2600 XT with 256MB GDDR3 memory (two dual-link DVI). I got a Wacom Cintiq 20WSX and I am running it as a secondary display with a 30" Apple Cinema Display. I mainly use Adobe Flash CS3 to do animation.
I was able to run with this set up for a month trouble-free until I noticed it crashing (gray curtain of death) recently. That was when I updated to 10.5.3.
I tried to downgrade back to 10.5.1 and found that the set up runs more stable with that version. However, I have some apps (such as Aperture 2) that I need to run, hence my persistence in running under 10.5.3, or 10.5.4 even.
I have the latest Wacom Tablet driver installed, by the way.
I just wanted to know if anyone else have this same set up but is having no issues. I would love to know what settings they are using that makes their setup trouble free. Or am I out of luck and should just revert back to 10.5.1?
Thanks.

Hey, hopfully anyone here could possible help me with this...
I have a MBP and when I bought a Wacom Cintiq half a year ago, Wacom told me already that there are problems with the NVIDIA 8600M GT. At the beginning everything run normal. Whenever I used the Cintiq to draw or just as a second monitor. BUT whenever I didn't connect it to my MBP my Intuos was not recognized (the tablet prefs where not in the System Preferences). As soon as I plug in the Cintiq and would un-plug it right after, the Intuos is recongized (and the Wacom prefs where in the System Preferences). When I installed the latest Wacom software (I un-installed the old one before), it seemed to work. I started my computer and it recognized the Intuos straight and the Wacom prefs, YES! BUT since yesterday, I believe the first time I used the Cintiq since I installed the new Wacom drivers, the same problem appeared again. In my System Preferences I get the message, "A USB tablet was not found when the system started....". This is driving me insane, to basically need a second monitor to plug in first in order to use my tablet?!?!?! This way I am not able to use my tablet when I am mobile and that is a big handicap....
Thanks.

Sapphire Theatrix 550 Pro and Neo 2 Platinum problem

Anyone manged to install and get a Sapphire Theatrix 550 (ATi Theater 550) TV Capture card to work on a MSI NEO 2 Platinum motherboard? I have two computers using the NEO 2 and the Theatrix does not work on either. The "ATI Unified AVStream" device has a conflict with the "PCI Standard PCI-to-PCI bridge". The resources section is greyed out on the "PCI Standard PCI-toPCI bridge" device. I have installed and tried both Windows Media Center and Windows XP
I have no idea how to correct this. Anyone have any ideas or better still solutions?
Thanks
Dal

Richard
I have returned the original motherboard as It would only post to the "Platinum logo" 4 time out of 10 starts! I have now installed the Theatrix card into my other machine which also supports a MSI Neo2 Platinum MB.
Unfortunately I can not try all the PCI slots on this machine as it is water cooled and the GFX and chipset waterblocks prevent access to slots 1 and 2
I did try slot 3 and when I attempt to install the drivers the computer resest it's self consistantly towards the end of the installation! I have tried running the ATI Catalyst Driver setup program and installing manually and the machine resets it's self at the end without warning!
The card is now in slot 4 and the drivers installed. However I am getting "This device cannot find enough free resources that it can use. (Code 12)" like before.
Here are the details you requested
Hardware IRQ Settings
SiSoftware Sandra
IRQ Number : Device
0 : System timer
4 : COM1
4 : Communications Port (COM2)
5 : NVIDIA nForce PCI System Management
6 : Standard floppy disk controller
8 : System CMOS/real time clock
9 : Microsoft ACPI-Compliant System
11 : ATI Unified AVStream Driver
13 : Numeric data processor
14 : NVIDIA nForce3 250 Parallel ATA Controller (v2.6)
15 : NVIDIA nForce3 250 Parallel ATA Controller (v2.6)
16 : NVIDIA GeForce 6800 GT
19 : VIA OHCI Compliant IEEE 1394 Host Controller
20 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
20 : Standard Enhanced PCI to USB Host Controller
21 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
21 : Realtek AC'97 Audio
22 : Standard OpenHCD USB Host Controller
23 : Standard OpenHCD USB Host Controller
I/O Settings
SiSoftware Sandra
I/O Range : Device
00000000 - 0000000F : Direct memory access controller
00000000 - 00000CF7 : PCI bus
00000000 - FFFFFFFF : ISAPNP Read Data Port
00000010 - 0000001F : Motherboard resources
00000020 - 00000021 : Programmable interrupt controller
00000022 - 0000003F : Motherboard resources
00000040 - 00000043 : System timer
00000044 - 0000005F : Motherboard resources
00000061 - 00000061 : System speaker
00000062 - 00000063 : Motherboard resources
00000065 - 0000006F : Motherboard resources
00000070 - 00000073 : System CMOS/real time clock
00000074 - 0000007F : Motherboard resources
00000080 - 00000090 : Direct memory access controller
00000091 - 00000093 : Motherboard resources
00000094 - 0000009F : Direct memory access controller
000000A0 - 000000A1 : Programmable interrupt controller
000000A2 - 000000BF : Motherboard resources
000000C0 - 000000DF : Direct memory access controller
000000E0 - 000000EF : Motherboard resources
000000F0 - 000000FF : Numeric data processor
00000170 - 00000177 : NVIDIA nForce3 250 Parallel ATA Controller (v2.6)
000001F0 - 000001F7 : NVIDIA nForce3 250 Parallel ATA Controller (v2.6)
00000274 - 00000277 : ISAPNP Read Data Port
00000279 - 00000279 : ISAPNP Read Data Port
00000290 - 00000297 : Motherboard resources
00000376 - 00000376 : NVIDIA nForce3 250 Parallel ATA Controller (v2.6)
00000378 - 0000037F : Printer Port (LPT1)
000003B0 - 000003BB : NVIDIA GeForce 6800 GT
000003B0 - 000003BB : NVIDIA nForce3 250 AGP Host to PCI Bridge
000003C0 - 000003DF : NVIDIA GeForce 6800 GT
000003C0 - 000003DF : NVIDIA nForce3 250 AGP Host to PCI Bridge
000003F0 - 000003F5 : Standard floppy disk controller
000003F6 - 000003F6 : NVIDIA nForce3 250 Parallel ATA Controller (v2.6)
000003F7 - 000003F7 : Standard floppy disk controller
000003F8 - 000003FE : COM1
000003F8 - 000003FF : Communications Port (COM2)
000004D0 - 000004D1 : Motherboard resources
00000778 - 0000077B : Printer Port (LPT1)
00000960 - 00000967 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
00000970 - 00000977 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
000009E0 - 000009E7 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
000009F0 - 000009F7 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
00000A78 - 00000A7B : Motherboard resources
00000B60 - 00000B63 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
00000B70 - 00000B73 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
00000B78 - 00000B7B : Motherboard resources
00000BBC - 00000BBF : Motherboard resources
00000BE0 - 00000BE3 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
00000BF0 - 00000BF3 : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
00000D00 - 0000FFFF : PCI bus
00000E78 - 00000E7B : Motherboard resources
00000F78 - 00000F7B : Motherboard resources
00000FBC - 00000FBF : Motherboard resources
00004000 - 0000407F : Motherboard resources
00004080 - 000040FF : Motherboard resources
00004400 - 0000447F : Motherboard resources
00004480 - 000044FF : Motherboard resources
00004800 - 0000487F : Motherboard resources
00004880 - 000048FF : Motherboard resources
00004C00 - 00004C3F : NVIDIA nForce PCI System Management
00004C40 - 00004C7F : NVIDIA nForce PCI System Management
00009000 - 0000907F : VIA OHCI Compliant IEEE 1394 Host Controller
00009000 - 00009FFF : PCI standard PCI-to-PCI bridge
0000A800 - 0000A8FF : Realtek AC'97 Audio
0000AC00 - 0000AC7F : Realtek AC'97 Audio
0000C800 - 0000C80F : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
0000CC00 - 0000CC7F : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
0000E000 - 0000E00F : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
0000E400 - 0000E47F : NVIDIA nForce3 250 Serial ATA Controller (v2.6)
0000E800 - 0000E81F : NVIDIA nForce PCI System Management
0000F000 - 0000F00F : NVIDIA nForce3 250 Parallel ATA Controller (v2.6)
Memory Resources
SiSoftware Sandra
Memory Range : Device
00000000 - 0009FFFF : System board
000A0000 - 000BFFFF : NVIDIA GeForce 6800 GT
000A0000 - 000BFFFF : NVIDIA nForce3 250 AGP Host to PCI Bridge
000A0000 - 000BFFFF : PCI bus
000C0000 - 000DFFFF : PCI bus
000F0000 - 000F3FFF : System board
000F4000 - 000F7FFF : System board
000F8000 - 000FBFFF : System board
000FC000 - 000FFFFF : System board
00100000 - 3FFEFFFF : System board
3FFF0000 - 3FFFFFFF : System board
40000000 - FEBFFFFF : PCI bus
D0000000 - DFFFFFFF : NVIDIA GeForce 6800 GT
D0000000 - DFFFFFFF : NVIDIA nForce3 250 AGP Host to PCI Bridge
E0000000 - E7FFFFFF : NVIDIA nForce3 250 AGP Host to PCI Bridge
E8000000 - E8FFFFFF : NVIDIA GeForce 6800 GT
E8000000 - EAFFFFFF : NVIDIA nForce3 250 AGP Host to PCI Bridge
E9000000 - E9FFFFFF : NVIDIA GeForce 6800 GT
EA000000 - EBFFFFFF : ATI Unified AVStream Driver
EB000000 - ECFFFFFF : PCI standard PCI-to-PCI bridge
ED000000 - ED0FFFFF : ATI Unified AVStream Driver
ED000000 - EDFFFFFF : PCI standard PCI-to-PCI bridge
ED100000 - ED1007FF : VIA OHCI Compliant IEEE 1394 Host Controller
EE001000 - EE001FFF : Standard OpenHCD USB Host Controller
EE002000 - EE002FFF : Standard OpenHCD USB Host Controller
EE003000 - EE0030FF : Standard Enhanced PCI to USB Host Controller
EE004000 - EE004FFF : Realtek AC'97 Audio
FEC00000 - FEC00FFF : System board
FEE00000 - FEEFFFFF : System board
FEFFF000 - FEFFFFFF : System board
FFF80000 - FFF80FFF : System board
FFF90000 - FFFBFFFF : System board
FFFED000 - FFFEFFFF : System board
FFFF0000 - FFFFFFFF : System board
Thanks again for your help

K8T Neo FIS2R AMIBOOT.ROM not working

Hi
Had a game crash on my system, and froze everything, so had to restart manualy - now I get the error BIOS is not installed..
I have downloaded a copy of the bios (not latest) and changed the relevant ROM file to AMIBOOT.ROM and copied to a freshly formated floppy.
I inserted the disk, held down CTRL and HOME and started the computer...
After a while of running through the messages of BIOS not installed and no SATA installed (which is correct), the floppy drive light comes on, and then after a while (afet I have released the CTRL and HOME keys) I get a message saying "Remove disks or other media, Press any key to restart" then nothing, if I press any key - it says the same thing untill I remove the floppy... and then it restarts again.
I have tried to restart using the floppy and the CTRL and HOME keys about 20 times so far - always the same result - I have even tried diferent versions of the BIOS.
Any ideas?
I only have one stick of RAM (256Kb - 333) and two IDE HD's
Many thanks in advance
GreenBoy

Hans
My Set up is as follows (from the top of my head as I am doing this form work)
K8T Neo FIS2R.
AMD 3300 745pin chip set.
1 stick of 512Mb ram (non branded - baught from Watford Electronics)
2 x 200Gb Maxtor HD's
1 40GB Seagate HD
1 DVD RW
Power 500W
Dont know what else you need...
Anyway - last night I reset the CMOS in the way you described.
Still cant find the VIA settings in the Advanced Chipset or elsewhare - but I will. urned of SATA in Intergrated Peripherals...
Anyway - what then happens, is it says it cannot boot.
I tried using a Win98 SE boot disk - and all the drivers were listed as not possible to load or something...
Any way - deciding I did not have anotehr boot disk to hand - tried Symantec Ghost - still same result.
Finaly I tried WinXP Pro, and found that this installed all the bootup files no problem at all - what was then found was that my C: partition was missing - yup boot sector had completely disapeared.
Anyway knowing that I have recent full backups og my primary drives using Ghost, I took the plunge, created a partition in the unalocated space, reformated the drive, and reinstalled WinXP... all seems ok for now... except the message regarding no BIOS - but from what you say as soon as I fing the switch I will loose that again.
The strange thing is I never used to get this message before, and do not remember setting anything up for SATA - couldnt afford the disks at the time....
Thanks for the help Hans, you have been more than gwenerouse with your time , but can you please give me some more information? (Im a bit of a Nooby at playing with BIOS etc as they scare the crap out of me! )
1) Why is the detail of my system so important? I have made no Hardware changes for approx 6 months and everything was fine untill the game crashed, so therefore, dont see why this should affect things.
2) Why did the flashing of the BIOS not work? I was following the instructions carefully - but nothing.. therefore in my Nooby mind this means there is something else wrong, stopping the flashing from working.
Again - many thanks
GreenBoy

6600GT not working with K8T neo-FIS2R

I recently returned a K8T NEO-FIS2R MB for repair. The problem was that the PS/2 and USB ports were broken. However the MB has been returned and the PS/2 and USB ports work fine. I posted about this several months ago.
Now the AGP port seems to be broken (not the actual slot). I have tried a 6800 Ultra and a 6600 GT (AGP version) GFX card in this slot. Both cards fail at the driver installation point. I have tried driver versions 66.93, 67.02 and 67.03. I also tried 3 versions of the via drivers 451, 453 and 455. Even tried XP with SP1 and SP2. The PC will sometimes BSOD, reset, won't boot into windows. The drivers sometimes install then other times they won't, etc. The problems only seem to be with the drivers for the GFX cards.
The 6600 GT works as I have tried it in another MB without any problems.
I know the memory works fine as I used memtest86+ for a couple of hours on the default settings without any errors and it works in another PC.
The spec of the PC is:
XP pro
K8T NEO-FIS2R MB
512MB corsair XMS at 2.5-3-7-3
XFX 6600GT
40gig HDD
FDD
Plextor CD writer
DVD Rom
PSU is a Q-tec 550W
I know Q-tec PSUs are not up to much from what I have read elsewhere in this forum, but I have had it running in a similar system with the 6800 Ultra installed without any trouble (even with the above MB before it went faulty). I have also tried a 400W PSU, that came with the case. The Voltages on the 12V line are between 12.00 and 12.03 when using the Q-tec PSU.
Has any body else had these problems with the 6600GT in the mentioned MB.
Also, how can I check the serial number on the MB with the label on the box, as this MB that was returned to me looks to “clean” to be the one I sent away for repair.
Thanks for any help

Hey, I'm glad to see a post on the new Gforce 6600GT AGP card. I just recently put together a brand new system (see my sig for specs). System runs great. The only thing I wanted to do was replace the video card, and after a great deal of anxiety I decided the Geforce 6600GT AGP was the best bang for the buck.
Well I got home, installed the card and never get passed the bios screen. (shows your processor, memory, memory siz), the screen u hit DEL to go into the bios.
The system doens't lock up, NUM LOCK can still be turned on and off, and CAPS can be turned of and on... but thats it. Just sits on that screen. I can't go into the bios either.
what settings do I need to do prior to isntalling this card to get it to work.
Let me know if you all need anymore details to help me out.
oh, I did reset my frequency to 10x200 (which is what I think the 3000+ is supposed to be at).

WinXp Pro as Virtualbox Guest can't ping router/internet

Hi:
I am running Arch 64 and installed virtualbox_bin 2.0.4-1 from AUR and guest additions 2.0.2-1 from AUR.
I have installed as a guest os, WinXP Pro and set up bridge networking per
http://mychael.gotdns.com/blog/2007/05/ … -bridging/.
My Arch host works fine (it can access the internet and ping the guest WinXP Pro). My WinXP Pro guest can ping my Arch host and other local machines on my network. However it cannot ping my router or access or ping the internet.
I log onto the WinXP Pro as the Administrator and I have the firewall disabled, so I don't think it is being blocked on the XP side by anything.
As far as Arch goes, I have tried adding the host name of the WinXP Pro machine to /etc/hosts and put the ip adress of the XP machine into /etc/hosts.allow. Neither of these actions resulted in success. I don't think I have a firewall or other special security measures on my Arch? I just did a fresh ftp install yesterday and did not add ssh or other security measures that weren't included in the default install and the base-devel install.
My search of the forums turned up a similar problem to mine that was solved by removing the firewall in the WinXP guest. I have already done that still without success.
My uneducated guess is that the gateway ip is not getting to the guest. I am using static ip for both the Arch host and the WinXP guest. The WinXP guest says that it is connected and reports no problems. I tried using dhcp on the XP guest but that didn't work either.
Here is the network section of my /etc/rc.conf
lo="lo 127.0.0.1"
BRIDGE_INTERFACES=(br0)
bridge_br0=(eth0)
br0="br0 192.168.1.201 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="eth0 0.0.0.0 promisc"
INTERFACES=(lo br0 eth0)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
Any help would be much appreciated.
bdika

Hi Floris:
Thanks for the reply.
I originally tried the Arch Way without success, that is why I tried the other way.
However at your suggestion, I have tried the Arch Way again, with the same results. That is I can ping other computers on my network but I can't ping my router nor access the internet from my guest.
Seeing that I have the same problem regardless of which method I use leads me to believe that it must be something simple and obvious that I am doing wrong. But what??! I have no idea.
Any thoughts you have would be much appreciated.
bdika

Tomcat 4.1.18 fails to deploy JnlpDownloadServlet on WinXP Pro

Hello,
I`m using Tomcat 4.1.18 on a Intel WinXP Pro and I`m trying to deploy JnlpDownloadServlet bundled with Java WebStart 1.0.1 with the following web.xml file:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>JnlpDownloadServlet</servlet-name>
<servlet-class>com.sun.javaws.servlet.JnlpDownloadServlet</servletclass>
     <load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jnlp</url-pattern>
</servlet-mapping>
</web-app>
When I Startup Tomcat It generates the following stack trace:
2003-04-16 11:37:21 HostConfig[localhost] Error deploying web application directory JavaSoundDemo
java.lang.NoClassDefFoundError: javax/servlet/http/HttpServlet
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
     at java.security.SecureClassLoader.defineClass SecureClassLoader.java:106)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:287)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1355)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1289)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:885)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:823)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3420)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:3608)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:821)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:579)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:307)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:772)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:559)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:401)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:718)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:358)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:166)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1196)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:738)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1188)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:347)
     at org.apache.catalina.core.StandardService.start(StandardService.java:497)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2190)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:512)
     at org.apache.catalina.startup.Catalina.execute(Catalina.java:400)
     at org.apache.catalina.startup.Catalina.process(Catalina.java:180)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
I`m sure servlet.jar exist (all the servlets in the example webapp works fine)
When I deploy the same app in Windows NT Workstation the problem disapears. Any suggestion?
thanx in advance.
Hans

I solved the problem just changing the JDK from 1.3.1_04 to 1.3.1_07
Thanx Anyway!
Hans

875P Neo-FIS2R File Copy errors loading Win XP Pro

While installing WinXP Pro SP 1 I get file copy failures on random files two or three times during the install. Retry succeeds on the file, but errors keep coming up after install randomly. Explorer crashes on logon, files are corrupt, etc. Tried two different MBs, two different CPUs, two different PSUs, two different sets of RAM, different IDE cables, booting from both DVD Drives, different Win XP CDs. I also tried the same with a Gigabyte 875 board and had exactly the same problem. With the Gigabyte board, if I ran the bus with a setting of 190 or 195 instead of 200MHz, the system ran fine, but then my 2.8GHz CPU is running at 2.66GHz. I can't go slower than 200MHz (but I did try 201 and 202; same errors) on the Neo-FIS2R so I can't find a setting that is stable and that's the board I'd like to be running. Any ideas about what's causing all of these combinations from running stable at a stock setting of 2.8GHz?
Thanks.
Mike Wolfe
P4 2.8C @FSB 200, HT Enabled
Corsair Platinum TwinX DDR400 2x256MB
875P Neo-FIS2R Bios Version 1.8
ATI AIW 9600 Pro 128MB No OC
PowerUp 350W Power Supply
WD2000JB 200GB; Master on IDE 1; No S-ATA
Sony DDU 1621 16x DVD ROM Master on IDE2
Sony DRU-510A DVD+-R/RW Slave on IDE2
BIOS Defaults - 200MHz CPU Bus - DDR Voltage 2.7V
On Board Promise Disabled; IDE Bus Master; P-ATA Only

I am also having trouble with this on xp pro. When fully installed I get many random errors. New at this but have read that if you install a partition more than 137 gb data corruption may occur. So I partitioned the drive 20, 70, 70, and installed xp pro on the 20 gb partition. Per mb and hdd manuals I installed xp sp1. I am still getting random errors. This is the only hdd. Maxtor 160 gb ata 133 on ide1. Is it impossible to run the system this way? It gives me random crashes and stop requests. It also at one point gave me erros saying the cdrom memory is corrupt. Is the hdd drive sze possibly the problem?
MSI 875p max fisr
corsair twinx xms 333 1 gb
ati raideon all in wonder
samsung 352 cdrw
antec 430w true power
3.0 g intel p4

Neo-FIS2R (i875) Questions and overclockability

I just got this board, looks sweet, have all the features and all that.... but I still have a few questions.
First my system:
Chieftec 420Watt psu (tried a 520Watt and a 550Watt psu as well).
MSI Neo-FIS2R bios 1.6
2 x 512Mb Twinmos PC3200 CAS 2.5 (with winbond CH-5 chips).
P4 2,6C Phillipines With Alpha PAL8942T with a pretty powerful 8x8cm fan. Arctic Silver 3 paste used.
ATI Radeon 8500 Pro
Audigy 2
2 x 80gig in raid at onboard promise controller.
WinXP Pro SP1.
Now onto the questions:
CPU temp:
In bios it says 37-38 deg C
In PC Wizard (from www.cpuid.com) it says 27-28 deg C.
In Motherboard monitor, newest version it says:
Sensor 1 set to winbond 1 = 27-28 deg C
Sensor 2 set to winbond 2 = 53-54 deg C
Sensor 3 set to winbond 3 = 66-67 deg C!!!! :O
What is correct and where is those sensors placed? As 66-67 deg C seems to be wrong?
And why do it not boot when I put in my Silicon Image 680 IDE controller? Tried all bios settings and different PCI slots.
I tried to OC my CPU to 3,25GHz but failed = I get a BSOD after a while in Windows or windows locks up. PCI/AGP is locked to 34/68MHz, MEM is set to DDR333 so actually the memory is running at 400MHz @ 2,5-4-4-8 (verified with CPU-Z). Tried upping V-Core up to as high as 1,7V (won't go higher due to risk of damaging CPU) Tried upping DDR and AGP voltage as well, still no change. It works great at 2,8GHz though with DDR at 430MHz
Any ideas? Or did I just get a less overclockable CPU or a crappy mobo?
And why do the voltages show up as very varying? V-Core changes from 1,528 to 1,587 when set to 1,550V, other voltages do also vary a lot.... Tried 3 different high quality PSU's so that should not cause it. My previous asus board showed way more stable voltages.
Is the build quality of this board any good? As varying voltages and overclocking sems to vary a lot....
Yes and I'm annoyed with the mem performance and problem with manually setting the memory timings at higher FSB's. Fix will hopefully come. Highest mem score so far is 4,9K
Should probably have waited for the asus P4C800-E (P4C800 with CSA LAN and ICH5R southbridge).

Quote
Originally posted by OC-Freak
CPU temp:
In bios it says 37-38 deg C
In PC Wizard (from http://www.cpuid.com) it says 27-28 deg C.
In Motherboard monitor, newest version it says:
Sensor 1 set to winbond 1 = 27-28 deg C
Sensor 2 set to winbond 2 = 53-54 deg C
Sensor 3 set to winbond 3 = 66-67 deg C!!!! :O
What is correct and where is those sensors placed? As 66-67 deg C seems to be wrong?
It's known problem MSI boards do not register tempratures right. It could however be resolved by another BIOS update.
So don't worry.
Quote
And why do it not boot when I put in my Silicon Image 680 IDE controller? Tried all bios settings and different PCI slots.
Have you tried setting the onchip ATA operate mode to native?
Quote
I tried to OC my CPU to 3,25GHz but failed = I get a BSOD after a while in Windows or windows locks up. PCI/AGP is locked to 34/68MHz, MEM is set to DDR333 so actually the memory is running at 400MHz @ 2,5-4-4-8 (verified with CPU-Z). Tried upping V-Core up to as high as 1,7V (won\'t go higher due to risk of damaging CPU) Tried upping DDR and AGP voltage as well, still no change. It works great at 2,8GHz though with DDR at 430MHz
Any ideas? Or did I just get a less overclockable CPU or a crappy mobo?
Just plain luck i guess, i have an 2.4C hitting 3.2 GHz.
Quote
And why do the voltages show up as very varying? V-Core changes from 1,528 to 1,587 when set to 1,550V, other voltages do also vary a lot.... Tried 3 different high quality PSU\'s so that should not cause it. My previous asus board showed way more stable voltages.
Voltages always vary as they depend on the total powerconsumption of the system.
Quote
Is the build quality of this board any good? As varying voltages and overclocking sems to vary a lot....
I cannot comment on this one as i have it's 865 sibling.
Quote
Yes and I\'m annoyed with the mem performance and problem with manually setting the memory timings at higher FSB\'s. Fix will hopefully come. Highest mem score so far is 4,9K
Well, you are an early adopter of this new technology, there are always little problems with brand new products like these.
Quote
Should probably have waited for the asus P4C800-E (P4C800 with CSA LAN and ICH5R southbridge).
You could always try to exchange to board, but i'd suggest you sit this one out. Asus itself isn't without problems. Take a look around the different forums around the world.
If you're really anxious to try something else, try the MSI 865 Neo2 FIS2R.

Liveupdate2 crashes in WinXp pro and Neo-fis2r

Similar Messages

Maybe you are looking for