LiveView paired with phone in conjunction with BT headset/headphones ?

Can anyone advise if LiveView works while having a bluetooth headset/car kit paired at the same time?
If streaming music via bluetooth headphones - is pairing LiveView at the same time possible?
Does it impact performance of streaming audio?
I would imagine/hope that given the presumably limited data being sent to LiveView it should not be taking up too much bandwidth but would appreciate a response from someone who has the device and is able to provide feedback based on real experience. SE Support has not been helpful in even responding to this query - let alone answering it.

I have a HTC Desire HD (Android 2.2) paired with Altec Lansing BackBeat 903 bluetooth headphones.
I can confirm that I can still use phone (answer and long press function) and multimedia functions (play/pause/forward/back/volume).
My headset also does ring.
I'm not sure how to resolve your issue but perhaps un-pair the liveview or revert to factory default so you can restore your bluetooth headset functionality.
Then pair liveview (without installing software) and see if you still have headset functions.
Then LiveView application
(I would not bother with the LiveWare application as it is not really needed)
Hope that helps - post back with your results either way.

Similar Messages

Integration of SPA500DS with SPA509 in conjunction with a UC560

Need to use a SPA500DS with SPA509. are working with a UC560.
what are the commands that I put in the UC560 to monitor an extension in SPA500DS buttons?

Basically you can't if you are using CCA as the SPA phones only support SPCP with the UC500 series. If you were to use the SIP firmware you could make it work, but it would be CLI only.
Cisco doesn't make this clear at all on the data sheet, confusing many customers including me.

HT1222 Ever since I downloaded 6.1.3 to my Iphone 5, I cannot pair my phone via bluetooth with my Camry. I have tried everything. What's up???? Help!

SInce I downloaded 6.1.3 to my Iphone 5, I cannot pair my Iphone 5 via bluetooth. I've tried everything: reset network; reset Iphone etc....HELP!!!!! There must be an issue with 6.1.3.
msgrwmb

So you cleared all pairings from your head unit and retstarted the car, you Reset the network settings on the car, then you tried to pair them? Does either one see the other after you do this?
Haven't seen many Camry BT complaints, you might check on their forum.
If you are convince it is your update then go here: http://www.apple.com/feedback/iphone.html and provide as much detail as possible.

Pair i phone 6 plus with new I Mac (27-inch, Late 2013) Yosemite 10.10.1

why is my new I phone 6+ not pairing to my new Imac w/Yo 10.10.1 when My Samsung S4 did without a problem?

Have you tried using AirDrop? Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

Problems with Phone Volume (Ringtone) with iPhone 3G and v20

It seems with then new iPhone 3G and/or version 2.0 that everytime my phone either is turned off or sleep mode activated, it always resets my phone volume to about 50%. I always have to manually turn the ringer volume up each time. Ive restored the phone and it continues to do so. Any thoughts?????

I have had a similar problem with my original iPhone and have not yet figures out how to fix it.

My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

Why will my I phone not connect with my IMac it pairs?

Why will my I Phone not connect with my IMAC it pairs?

Since you use the work "pairs", I must assume you're talking about bluetooth.
Unless you're trying to use the personal hotspot to tether the computer to the phone, you can't do that...
You can only use bluetooth with a computer for tethering. Bluetooth file sharing is not supported. Neither is bluetooth sync.

I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.

Need help Using iphone5 with Bluetooth in 2006 Volvo xc90. I have paired my phone and can make calls. I want to play music on my iPhone using the car's sounds system.

I have just purchased a 2006 Volvo with Bluetooth. I have paired my phone with the car to make phone calls. I don't have a way to play my iTunes music through the cars audio system. Is there a special auxiliary adapter that I need to buy?

Nobody have notice this problem or have a tip for that?

My iPhone5 won't reconnect to my Subaru Forester Bluetooth radio. I have to go and delete the iphone from the radio and pair the phone and radio everytime. I never had this issue with my samsung

I have a 2012 Subaru Forester and when I get in, my iPhone5 won't connect to my Bluetooth radio. I have my Bluetooth radio knows about the phone, but the iPhone5 just won't connect. I have to go and delete the iPhone5 from the radio memory and then pair the radio & the iPhone5 again, then it connects and works great until I shut off the car. Then when I get back in or restart the car I have to go through this all over again. Anybody got any ideas? It is driving me crazy and i just got my iPhone5 a week ago. Now I am not a real iPhone Savvy user, so it may just be something I have not set properly. So can some one Help? Please!

My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
It did my head in for months.
Thanks guys, because of you, I worked this out. My Forester needed the "handsfree" setup, not just a Bluetooth pairing. Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
But only to initiate the hansfree component.
From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup. Because I'd done this originally, my old phone was in here. Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone. Now it auto connects everytime I get in the car
Woohoo.
Johnny

IPhone 6 and Bluetooth phone connectivity issues with my vehicle: this is how I fixed it.

With so many threads on this topic, I wanted to detail the steps I took to fix my iPhone 6 Bluetooth issues regarding connectivity to my vehicle and handsfree calling. My phone was pairing with my vehicle without a problem and syncing my contacts and call history but when I attempted to make a call (from either the phone or the vehicle screen) the audio went out and I could not hear the call either through the vehicle speakers or on the phone. The call was going through but I was unable to see it on my vehicle screen and/or hear it either the phone or the vehicle screen.
Based on my research and what I have learned so far, the people having problems are those who restored their new iPhone 6 from an iCloud backup from a previous phone, rather than setting up their iPhone 6 as a new phone. I did an iCloud restore from my previous 5s running iOS 8.
First, I am a Verizon customer and I enabled Advanced Calling on my line. After I requested that this feature be added to my line, under “Cellular” settings on my iPhone, I enabled LTE voice & data.
Next steps:
1) Unpair/remove iPhone from the vehicle;
2) Forget/remove the vehicle from the phone Bluetooth settings;
3) Soft reset the iPhone;
4) Reset network settings on the iPhone; and
5) Pair the phone to the vehicle again and attempt to make a call.
If that does not work…
6) Perform a factory reset, erasing EVERYTHING from your phone and set it up as a new iPhone rather than restoring from a backup.
Resetting the network settings seems to be working for some people. It did not work for me. I tried it a few times with no result. I did the dreaded factory reset, paired the phone with my vehicle and had all of my Bluetooth functionality back and was able to use the handsfree phone with zero issues.
I was on the phone yesterday multiple times with Apple, Toyota Entune, Verizon and my Toyota dealer. Verizon blamed Toyota Entune, Toyota Entune blamed Verizon and my Toyota dealer blamed Apple. Nobody had a clue how to fix this issue or what was causing it. I don’t know the exact reason why the previous iCloud backups are killing the Bluetooth connections, I just know what worked for me and I thought it was worth sharing.
Good luck.

The new 8.0.2 update DID NOT FIX THIS ISSUE AT ALL. After you power off and on with the phone, same issue as the 8.0, all 3 of my cars lost Bluetooth connection and shows no signal at all. Good job Apple, what a lousy update you guys did.
2011 Lexus ES350
2011 Subaru STI
2012 Mercedes E350.

Why doesn't my Phone work properly with my Cars Bu...

Car manufacturers are now building complex car kits into their vehicles.
The companies include:
Ford, Audi, BMW, Alfa Romeo, Peugeot, Vauxhall/Opel, Volkswagen, Mercedes, and other high end specification cars.
One of the functions, is that it pulls the phone book data from the phone via bluetooth.
Background Information
A lot of the Nokia E and N series, Symbian S60 handsets, do not carry the required bluetooth profile in their bluetooth stack.
The phone is missing the Phone Book Access Profile (PBAP) that allows the car to pull data from the phone.
Why the phones do not carry the profile is unknown. What is known is that using the Nokia 810 car kit downloader software, you can partly restore some of this functionality.
Additionally the Nokia 616 Car Kit Downloader will also function, along with the Ford Connectivity Downloader.
Workaround
The information is here:
http://europe.nokia.com/A4143881
You'll need to delete the existing pairing in the handset and the car, then install and run the application, don't just install the application and expect it to work, you must re-pair the handset and the car.
When it is installed start the application, and then re-pair the phone to the radio, this may then copy your contacts into the radio, be paitent, as it can take a few minutes to copy and setup.
It may copy the phone book over, but the Missed Dialled and Received calls may not work.
I have tested this with an Audi S3, A4, and A6 on a Nokia N82 and N95.
The Nokia E71, appears to have the profile and functions correctly with an Audi car kit, in Handsfree Profile mode.
The Nokia E71, when connected in SIM access profile mode is the same as the other E and N series handsets are requires the 810 or 616 downloader to be installed in the handset.
Installing the 810/616 downloader only restores phone book functionality, there are some software combinations on car and phones that work without the downloader.
It may also be possible for your car manufacturers franchised dealer to be able to update the software in your car so that additional features are available, they may charge for this service. Also updating software in the phone may also help, as Nokia may see fit to add the profile if they are able.
For some cars and handsets, when you are connecting with the SIM Access Profile function, you will still need to install the 616/810 downloader application as detailed above, as the phone normally switches off most of its functionality. The phone book will then normally function when you have installed the application.
The workaround only resolves the problem with the phone book. Problems such as random disconnecting which also is reported, are beyond the scope of this article.
Edit: 24-01-09
I have noticed recently that random disconnecting can be caused if you have an Internet Telephony Service running in your handset. Also if you have the WLAN discovery setting enabled then this can cause the same problem - whilst I am not attempting to try and resolve random disconnects, it could be a reason for why this is happening.
I have recently installed a VoIP service in my handset and 100 mtrs from my home when the handset disconnects from this service at my house, the Bluetooth disconnects from the Car Kit, in my E71.
Edit 14-04-09
Audi also make a Bluetooth Sim Access Profile adapter for their Generation II and Generation III (Low) mobile telephone interface. (Audi Part No: 8P0051440) The SIM access service will require the 810 phone kit downloader application. With this on my kit I am getting disconnections with Bluetooth. To prevent this, I switch Bluetooth off and then on again prior to connecting to the kit, this resolves the disconnecting.
Edit 12-05-09
Further to the Audi edit above, I now have an Audi S4 2009 with the Audi Mobile Phone Preparation (high) for this to function correctly with phone book access the 810 Downloader needs to be installed, and running when the phone connects to the car every time it connects. Otherwise the phone book access does not operate.
Edit:12-06-09
You can also use the Ford Contact Downloader application from
http://www.ford-mobile-connectivity.com/ - select downloads then Select a Nokia E or N Series Device and download the contact application (this works fine in my Audi)
Shunts...
Message Edited by shuntfield on 02-Nov-2009 02:51 PM
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

It allows me to load the AKO CAC sign in page. I click sign in using CAC, it asks me for my pin, I enter it then it load the page saying it has a problem with the security

How to pair my white apple remote with my macpro?

this is the kind of mac I have G87151S7UQ2 (I think?)
its a tower pro, and I'd like to pair my white apple remote with it
Thank you!

The Mac Pro does not have a built-in IR receiver. You can however buy a USB IR receiver and use that in conjunction with your Apple Remote.
See http://twistedmelon.com/mira/hardware.html

How can I pair iPhone 6 / 8.1 with Audi and Mercedes until 8.1 is fixed?

How can I pair iPhone 6/8.1 with Audi and Mercedes

Generally your put the vehicle into discovery mode, turn Bluetooth on for the phone and the two should discover each other. I don't know what you mean about getting 8.1 fixed, as it is working just fine for me in my vehicle. Try going into the phone and removing the car(s) from the phone list. Turn off Bluetooth. Go into Settings>General>Reset Network Settings. Do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple Logo and release. The phone will reboot. Go into the vehicle(s) and remove all reference to the phone from the vehicle list. Turn the car off, then back on. Put the vehicle's system into discovery/pairing mode. Turn Bluetooth on for the iPhone. The two should pair after following any additional instructions from the vehicle's user guide, such as entering a PIN code.

I cannot pair my Macbook Air (Yosemite) with my iPhone or iPad via Bluetooth.

I cannot pair my Macbook Air (Yosemite) with my iPhone or iPad via Bluetooth. It is recognising the devices but 'connection unsuccessful'

That is correct. Macs do not pair to iPhones, iPads, etc.
However, pairlng is not required to get Handoff to work. Both devices must have Bluetooth on, but they need not (indeed cannot) be paired.
OS X Yosemite: Pick up where you left off with Handoff
You must be using supported devices:
OS X Yosemite: supported devices for Handoff, Instant Hotspot, Phone Calling, SMS, and AirDrop

LiveView paired with phone in conjunction with BT headset/headphones ?

Similar Messages

Maybe you are looking for