LJ 3600 drivers for Storage Server 2008 not working

we have several LJ 3600 printers in our environment and would like to install these on our new server:
Win Storage Server 2008-64-bit
but have had no success printing with any drivers out there.
I have certainly tried the host-based drivers
All I ever get is a page: @PJL SET JOBATTR=JobAcct4=20110426125259...etc
can you suggest a new driver to use?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
thank YOU for any help you can offer!

OK.
I can't help you with the drives then. That is out of my realm of knowledge. If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
As for the graphics driver...
Download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
Select 7-zip to Extract to: and let it extract the file into a folder. I let it extract to the file name of the folder.
Then just follow the rest of my instructions to install the driver.
Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

Similar Messages

Drivers for Windows Server 2008 and HDD issues

Recently I have had the hard drive with my OS fail. After replacing the hard drive and reinstalling windows server 2008 I seem to have run into a few issues with drivers. After insalling Windows, I had 3 items in my device manager that did not install properly. I was able to get the driver for the LAN port to work but I have not gotten the driver for "Standard VGA Graphics Adapter" and "SM Bus Controller". After a little research, I believe the video card is a Radeon HD4350. With that information I still have been unable toinstlal the correct drivers for either of these items. I've tried several drivers listed on the drivers support page on HP's website but all fo them return the same error about not finding the correct Operating System. The link to the driver I used originally on my previous installation seems to not be valid any longer.
Also I can't seem to access the two additoinal hard drives (connected by sata). They were used with the previous installation of windows with no issues. They appear in the device manager but do not show up under My Computer. A removeable drive does show up that I'm not sure what it is. Previously I had used software to mirror one of the drives onto the other as to prevent losing data if a drive would fail. Is one of the above drives causing the issue with not being able to access the drives or did the software used before cause the problem?
Any help on these issues is greatly appreciated.
This question was solved.
View Solution.

OK.
I can't help you with the drives then. That is out of my realm of knowledge. If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
As for the graphics driver...
Download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
Select 7-zip to Extract to: and let it extract the file into a folder. I let it extract to the file name of the folder.
Then just follow the rest of my instructions to install the driver.
Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

64-bit OLE drivers for Windows Server 2008-R2

Hello,
Oracle DB=10.2.0.4 installed on RHL=5
Applications access vis Oracle OLE. Currently, we are updating to Windows 2008 Server (64-bit). I have heard that there are no 64-bit drivers from Oracle, right or wrong? If it is wrong, could you please provide me the link to download it.
If it's not possible, what alternative is there, or any directions from Oracle? ... A re-programmed to ODBC or web services,etc is unfortunately not possible.
Thanks a lot for your help
Regards..
Edited by: John-M on Jun 1, 2012 7:14 AM

Hello Greg,
Thank you for the reply. I would appreciate if you could elaborate a bit more please.
There is a 64 bit version of OraOledb that installs with the 64 bit client.Which DB Client for Microsoft 64-bit from the following Oracle site should work for database 10.2.0.4 version? Is the higher version of 64-bit Client version works with lower version of Database Server?
http://www.oracle.com/technetwork/topics/winx64soft-089540.html
There is no 64 bit oo4o, and it's not supported to use 32 bit oo4o on a 64 bit OS (although it seems to work).If there is no 64-bit Oracle Object for OLE, then what is the recommended way or workaround when using with Microsoft Windows Server 2008 R2 64-bit?
Thank you very much.
Regards..
Edited by: John-M on Jun 4, 2012 2:33 AM

HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2

I bought an HP Pavilion p7-1451 so I could have an affordable, yet reasonably powerful machine to put a server software development environment on (I'm a software engineer).
It came with Windows 8, but I needed Windows Server 2008 R2, which I own through an MSDN subscription. I did what I always do in these cases, re-partioned the hard drive, re-formatted, and installed the new operating system.
I have nearly all devices working properly, but it still won't recognize the USB 3.0 ports and the Bluetooth device. I searched everywhere but cannot find anything that will work. Anything from the HP site is targeted for either Windows 7 or 8, and when trying either one of those, it tells me "Your system does not meet the operating system requirements" and MSI does not publish any drivers at all for this particular motherboard (that I can find anyway).
Motherboard: MSI MS-7778 also known as: MSI 2AEO version 1.0
BIOS: AMI 8.12
This is the list of "Other devices" in Device Manager that Windows doesn't recognize:
BCM20702A0
Universal Serial Bus (USB) Controller
Universal Serial Bus (USB) Controller
Bluetooth Device ID: USB\VID_0A5C&PID_21F1&REV_0012
USB Controller device ID: PCI\VEN_1022&DEV_7812&SUBSYS_2AE0103C&REV_03
Windows still doesn't recognize them after allowing it to search the internet.
And I've googled all over the place and I'm not getting anywhere.
Does anyone have any advice?
Any chance this could be related to the BIOS?
I'm not having any luck finding a BIOS download for this motherboard either.
Any help is much appreciated!
This question was solved.
View Solution.

Holy crap, it worked!!
My version number was slightly different in the .inf files, but I dropped the last ".1" off the end and that did the trick!
So, the steps were:
Get and extract the driver files:
1. Download the AMD Chipset Drivers file from here:
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
(choose the first download in the list. It's called "AMD Chipset Drivers")
2. Download and install 7-Zip from here:
http://7-zip.org/download.html
3. Right click the 13-4_vista_win7_win8_32-64_sb.exe chipset file, select "7-Zip", then choose "Extract Here"
Install the USB Host Controller driver:
1. Open the USB Controller .inf file in Notepad from the following location:
13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdxhc\W764A\amdxhc.inf
2. Find all instances of: .5.1.1 and replace with: .5.1
and save and close the file.
3. In Device Manager, right click the first unknown "Universal Serial Bus (USB) Controller" and choose "Update Driver Software..."
4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
5. Accept any warnings and choose to Install anyway...
It should recognize and install the USB Controller driver (finally progress!)
Repeat the same steps above for any other USB 3.0 controllers that are unrecognized.
The devices should now say "Unknown device" instead of "Universal Serial Bus (USB) Controller".
Windows recognizes your controllers now, but not the USB root hubs.
For each of those "Unknown device" entries, do this to install the USB 3.0 Root Hub:
1. Open the USB Hub .inf file in Notepad from the following location: (notice that it's a different directory)
13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdhub\W764A\amdhub30.inf
2. Find all instances of: .5.1.1 and replace with: .5.1
and save and close the file.
3. In Device Manager, right click the first "Unknown device" and choose "Update Driver Software..."
4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
5. Accept any warnings and choose to Install anyway...
I plugged in a USB 3.0 hard drive, and at first it didn't seem to work. I tried another port and still nothin. But after about 40 seconds the drive was recognized and all is well. Yay!
Thank you Paul for your help!
Hopefully this post will help others too.
USB 3.0 on a fresh install of Windows Server 2008 R2.
That was easy. :-P

JDBC drivers for SQL Server 2008 and PI7.0

HI,
I have deployed the JDBC drivers (sqljdbc.jar and sqljdbc4.jar) available for the SQL Server 2008 from the microsoft website as described in the how to document for deploying and configuring JDBC and JMS adapters.
I am running a JDBC to FIle(XML) scenario. When I go and see on the RWB CC monitoring, I get this error
Error during database connection to the database URL 'jdbc:sqlserver://hostname:1433;databaseName=123_Nagasatya' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://hostname:1433;databaseName=123_Nagasatya': UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 50.0)'
WRT to the SQL server the port 1433 is open on the host and there is no firewall on the PI server as well as the SQL Server. Both are on different machines.Any help would be greatly appreciated.
Regards.

Hi Sujan,
This is the link.
[JDBC|http://www.microsoft.com/downloads/details.aspx?familyid=c47053eb-3b64-4794-950d-81e1ec91c1ba&displaylang=en]
or
You can also use the one on the market place.
Go to http://service.sap.com/msplatforms -> SQL Server
get zip-file sqljdbc_12_hotfix.zip contains the sqljdbc.jar file.
It should work.
Please let me know if you have any questions.
Regards.

U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

so i did a fresh instal of windows xp pro sp3.
device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
LAN shows up. and so does the 1394 on the network connections, but no wireless.
(note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
however i cant seem to find a way to get the wireless to work.
Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
please help, totally lost.

Your "yellow" device is Bluetooth, not WiFi.
Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
//help will save the world

Downloaded drivers for the MS6570 do not WORK - HELP!

Hello,
I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php
and from:
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
I appreciate any info.

I appreciate everyone's reply....
Here is what I have done.
I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
Thanks for any help again.

JDBC drivers for SQL Server 2008 and NW 7.00 (UD connect)

HI, we recently updated a UD connect Source DB fronm SQL Server 2000 to 2008; currently struggling to find a compatible JDBC driver; does anyone have a UD connect or PI system connected to a SQL 2008 DB via JDBC drivers?

[http://go.microsoft.com/fwlink/?LinkId=144633&clcid=0x409]
[http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=99b21b65-e98f-4a61-b811-19912601fdc9#tm]

Drivers for ATI HD2600 PRO not working fine on Bootcamp

Hi!
I´m installing Bootcamp drivers on my iMac (2.0 and upgrading to 2.1) with Windows Vista Ultimate 32bit. The thing is that in the device administrator, my graphic card (ATI HD2600 Pro) is named ATI HD2600XT. Also, I can see a few lines when having a white screen on my monitor, like the refresh rate was not correctly configured.
There´s any way to fix this error by downloading any aditional driver?
Thanks in advance,

Hi-
The 9800 Pro is plug and play in OS X.
Did the eBay seller state Mac compatibility?
As for testing, the card is installed and either provides video through the DVI and VGA ports or it does not.
There must be power connected to the 4 pin Molex connector on the top corner of the graphics card.
A reduced ROM card won't display an error screen if power is not connected. It won't display anything at all.
A full ROM version will display a default error screen.
*Power must be connected*.
There was an individual here recently, who bought a 9800 Pro from someone on eBay who stated Mac compatibility, but sold an unflashed, vanilla PC card. There is no picture unless the card has been flashed with Mac ROM.
If power is connected to the molex connector, and all other conditions (taping, installation, cabling) are normal, I would return the card as DOA.

Revoking push certificate for lion server does not work

After reinstalling my Lion Server - based on a Mac Mini Server - I generated also a new Push Certificate since I changed a lot of names/config. Now I found that an older Push Certificate is shown as active althoug I allready revoked it. When I hit the Revoke Button besides that Certificate (that is shown as valid and active until 9-12) I get an error - allready revoked!? Does this harm my configuration and can I do anything to solve this problem?
Thanks for any help/suggestions.
Best,
Torsten

The truth is, I shouldn't have posted this. Sorry. Late. Frustrated. I really just want it to work. I got Lion in hopes of learning how it worked. Now that I know it doesn't, I know not to recommend to my clients.
Apple should give up trying to "make believe" you can manage an Enterprise Network Server using a GUI. They have successfully proven it over and over. Lion is their coup d' gras of "Don't try this at home".
Now, I will search the forum for the answer, sure to discover that after a long, long, session in Terminal, using cryptic unix commands, I'll solve my problem.
That's all. It will be doubly frustrating, as I'll have to turn off the Server so I can even see the internet, to find answers, create pdf's of web pages, turn the server back on, and try to fix.
It is simply unacceptable. That's all.

Windows Storage Server 2008 R2 Essentials - Office365 Addon

Hi there,
Sorry for the strange request. I have a few of these "Windows Storage Server 2008 R2 Essentials" in the field(Provide by WD - DX4000). Now
a few months (maybe always a year + Now), I was able to find and possible download the Office365 Add-on for Windows
Storage Server 2008 R2 Essentials. It should be the same as Small Business Server 2011 Essentials.
I found a bunch of links to and that talk about the UP4 having it built in. But I can't find anything or any links to download the addon. So unless I'm missing something, I can't seem to find it for the Windows
Storage Server 2008 R2 Essentials. Now maybe I'm the only person in NA that is looking for this, but my clients are moving to Office365 and it would be nice to have all the username and passwords the same.
Now as i write this I'm think that the SBS 2011-E is built on a domain where WSS is under WorkGroup. So maybe that's why its not available much.
Any thoughts, or if someone has a copy of a latest add-on and want to upload it here, that would be nice.
Kevin

Dear Sir
I believe you are mistaken. When SBS 2011 Essentials came to market there was no integration between Office 365 and the Actual Server Dashboard. (It was not ready at the time the Server went RTM).
At the end of 2011 the Office 365 team released the so-called Integration Module for SBS 2011 Essentials with office 365 as it is noted at the following Blog post:
http://blogs.technet.com/b/sbs/archive/2011/12/22/office-365-integration-module-for-windows-sbs-2011-essentials-released-today.aspx
This integration module later was included in a UR Package (UR2 if i correctly remember) so you didn't had to installed it separately. That is the reason that you cannot find the original Download today. More info at the following:
http://support.microsoft.com/kb/2630429/en-us
To concludethere wasn't a Office 365 Integration Module for Storage Server 2008 R2 Essentials ONLY for SBS 2011 Essentials.

Windows Storage Server 2008 R2 Client restore for UEFI Bios Error

My surface pro 3 has been backing up successfully to a Windows Storage Server 2008 R2 Essentials for months now. I now need to restore the Surface Pro 3 to backup created last week. However I cannot get the Surface Pro3 to boot from the
Recovery stick created by the Recovery Tools task. I also can't get the Surface to boot from an external dvd drive. The Surface seems to just ignore the External DVD drive. Maybe there is a problem with it. I will try it somewhere else.
However the error I get trying to boot from the USB is the following.
Window Boot Manger
File \EFI\Microsoft\Boot\BCD
Status: 0xc000000d
Info: An error occurred while attempting to read the boot configuration data.
How do I fix this issue and get the Surface Pro 3 to restore from backup?

Hi,
Please try to disable secure boot in BIOS and check Enable Legacy Option ROMs under Advanced Boot options to resolve the issue.
For more detailed information, please see:
Error after UEFI PXE Windows 7 OSD
https://social.technet.microsoft.com/Forums/en-US/2eb69a11-2d56-4590-8a3c-e9f00b8c0d50/error-after-uefi-pxe-windows-7-osd?forum=configmanagerosd
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SQL Server Usage Summary page, the count of user/device: does not show for SQL Server 2008

Does MAP tool capture User Summary (count of users, their details) for SQL Server 2008?
At my end, its working for SQL Server 2012 but not showing User Summary for SQL Server 2008..
Does the User Summary only works for SQL Server 2008 Enterprise edition as one of the thread points out?

This is from the
Wiki article:
SQL Server 2008 Enterprise and Datacenter Editions introduced audit event configuration for Windows security logging, which enabled SQL Server 2008 to log logon events to the Windows Security log. The table below shows which versions and editions have the Audit
feature that is needed to record the logon events. MAP cannot obtain user and device access information for any other editions or any older versions of SQL Server.
Datacenter
Enterprise
Business Intelligence
Standard
Workgroup
Web
Express
SQL Server 2008
N/A
Yes
N/A
No
No
No
No
SQL Server 2008 R2
Yes
Yes
N/A
No
No
No
No
SQL Server 2012
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

How to install KB2950358 on Windows STORAGE Server 2008 R2?

Hello
I am experiencing the exact issue described
here on my WD Sentinel DX4000 nas box which runs Windows Storage Server 2008 R2. This is causing regular crashes and reboots and general unreliability when the memory leak causes all ram to be used up and the CPU is constantly running at 100% which both
increases electricity usage and shortens the lifespan of the system.
I have downloaded the hotfix on that KB article but it refuses to install claiming that it is not compatible. When the underlying Windows Server 2008 R2 OS is the same how can it not be compatible? My theory is that the Storage server version is only used
and available on a small handful of OEM devices and there's barely any information of it on the internet so I think Microsoft have forgotten to add it to the compatibility list for this particular hotfix.
After weeks of searching, I cannot find a way to force install the update. It's not a business-critical system and I've got backups of it so I am happy to try manual or risky efforts to get it installed. I have tried extracting the MSU file but that doesn't
give me any useful files to install it manually or skip the compatibility checks.
I've also tried to contact Microsoft directly but they don't even have Storage Server listed as an option on their support contact page so I've given up there, as a last resort I am hoping someone here can point me in the right direction. Other online forums
refuse to help saying it's too risky with a server but personally I want it installed and will try anything to do so because I've got a £1000 NAS sitting here that is unusable due to this issue. I'd rather not reinstall the OS as the problem reoccurs - I've
tried it already before I found this KB article.
Bottom line, Microsoft have identified the issue and released a hotfix, the server version IS supported, but was not added to the compatibility restrictions of the update so I cannot get the update installed.
Any advice gladly received. Hopefully someone from MS will see this and be able to update the compatibility of the hotfix if nothing else is possible.

I see SP1 is a prerequisite. Also the manufacturer may have specific patch procedures or recommendations so I'd probably contact them directly.
http://support.wdc.com/product/install.asp?wdc_lang=en&fid=wdsfWDSentinel
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Auditing failed access to files and folders in Windows Storage Server 2008 R2

Hello,
I've been trying to figure out why I cannot audit the failed access to files and folders on my server. I'm trying to replace a unix-based NAS with a Windows Storage Server 2008 R2 solution so I can use my current audit tools (the 'nix NAS
has basically none). I'm looking for a solution for a small remote office with 5-10 users and am looking at Windows Storage Server 2008 R2 (no props yet, but on a Buffalo appliance). I specifically need to audit the failure of a user to access
folders and files they are not supposed to view, but on this appliance it never shows. I have:
Enabled audit Object access for File system, File share and Detailed file share
Set the security of the top-level share to everyone full control
Used NTFS file permissions to set who can/cannot see particular folders
On those folders (and letting those permissions flow down) I've set the auditing tab to "Fail - Everyone - Full Control - This folder, subfolders and files"
On the audit log I only see "Audit Success" messages for items like "A network share object was checked to see whether client can be granted desired access (Event 5145) - but never a failure audit (because this user was not allowed access by NTFS permissions).
I've done this successfully with Windows Server 2008 R2 x64 w/SP1 and am wondering if anybody has tried this with the Windows Storage Server version (with success of course). My customer wants an inexpensive "appliance" and I thought this new
variant of 2008 was the ticket, but I can't if it won't provide this audit.
Any thoughts? Any of you have luck with this? I am (due to the fact I bought this appliance out of my own pocket) using the WSS "Workgroup" flavor and am wondering if this feature has been stripped from the workgroup edition of WSS.
TIA,
--Jeffrey

Hi Jeffrey,
The steps to setup Audit on a WSS system should be the same as a standard version of Windows Server. So please redo the steps listed below to see if issue still exists:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
A similar thread:
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/da689e43-d51d-4005-bc48-26d3c387e859
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

LJ 3600 drivers for Storage Server 2008 not working

Similar Messages

Maybe you are looking for