LJ Pro200 M251n not printing certain font sizes

My new printer won't print text at certain font sizes using Word or Publisher 2010. Up to 60pt it's fine, but not 72, 100 or 120. However, it will print 240 pt. It will also print these text items from pdf.
Is this a driver issue? I'm using PCL6 but can't find any other drivers on the HP website. Do I need UPD PCL 6?
This question was solved.
View Solution.

Hi,
Update the latest firmware for the printer, that should resolve a such.
Use the following tool if it is connected with a USB:
http://ftp.hp.com/pub/softlib/software13/COL44532/​lj-108129-8/M251_color_Series_FW_Update-20150212.e​...
For a network connection follow these steps:
http://support.hp.com/us-en/product/HP-LaserJet-Pr​o-200-color-Printer-M251nw/5097632/model/5097639/d​...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • MY printer officejet7​000 DOES NOT PRINT FULL A3 SIZE PAPER LIKE my prin cut for botam

    MY printer officejet7000 DOES NOT PRINT FULL A3 SIZE PAPER my print cut for botam & top side, Same printout give in my old model printer like k7108  this printer printour full printing, but I newly purchase printer not printour full a3 size print

    Those '''user_pref("print.printer_Artisan_837 ....''' preferences are what needs to be deleted, with Firefox closed.
    I think that "ding-dong" error sound might be due to an old print job stuck in the print cache, though. Open the Windows Control Panel > Printers and Faxes and check the '''Status''' for that printer.

  • OfficeJet Pro 8610 Not printing certain documents

    My 8610 OfficeJet Pro is set up ALMOST perfectly.  It prints almost all documents including email, word, website info, etc.  HOWEVER, it will not print certain .pdf files and Word documents with Drawing Tools using within them.  I have run every test & shows successul setup of wireless printer.  I also did the HP Print & Scan troubleshoot in which the program found any problems & Fixed them.  I did not hook up the Fax part of this system.  Otherwise, all parts are working fine.  However, in trying to get it to work I have disabled my Print from phone as well.   It was working prior to trying to print a document with Drawing Tools & changing settings on the printer to try & get it to work.   It is showing me it is connected but my phone is not recoginzing the printer. When I try & Print the document with the Drawing Tool within it, it sends it to the printer, and printer shows "Printing Report", But nothing happens.

    My 8610 OfficeJet Pro is set up ALMOST perfectly.  It prints almost all documents including email, word, website info, etc.  HOWEVER, it will not print certain .pdf files and Word documents with Drawing Tools using within them.  I have run every test & shows successul setup of wireless printer.  I also did the HP Print & Scan troubleshoot in which the program found any problems & Fixed them.  I did not hook up the Fax part of this system.  Otherwise, all parts are working fine.  However, in trying to get it to work I have disabled my Print from phone as well.   It was working prior to trying to print a document with Drawing Tools & changing settings on the printer to try & get it to work.   It is showing me it is connected but my phone is not recoginzing the printer. When I try & Print the document with the Drawing Tool within it, it sends it to the printer, and printer shows "Printing Report", But nothing happens.

  • Flash Text not displaying certain fonts

    Thanks as always…
    I am trying to use Flash text for some headings, but after an
    hour of pulling my hair out I've just realised it will only display
    certain fonts, such as Helvetica etc.
    I added the font I want to use to my font list but it still
    does not display…
    I'm using MX on OSX 10.3.9.
    Any ideas? Thansk.
    Flash Text not displaying certain fonts

    Fodderstompf wrote:
    > Thanks guys,
    >
    > I don't have Flash MX and it turns out the font is a
    Postscript Type 1.
    >
    > Didn't realise about the true-type thing, bit of
    nusiance (and completely the
    > opposite of the hassle I normally have with print
    work!).
    >
    > I'm gonna look and see I can get a true-type version of
    the font (Tabitha), or
    > is there any other work around?
    >
    > Thanks.
    >
    >
    Is your text in a dynamic text box, or static text box in
    flash?
    I don't think the issue concerns the "true-type" or not
    "true-type" font.
    In Flash, when text is part of a dynamic text box (which I
    assume is the case in your situation),
    then the font works just like in an html page:
    if the font is installed on the computer it will show, if
    not, it won't. The way around this, is to
    embed the font data in the authoring flash file, and link it
    to the dynamic text box, via actionScript.
    So if you cannot work on the authoring Flash file with Flash
    MX or Flash8, and if indeed we're
    talking about a dynamic text box, your only option is to use
    a web-safe font.
    seb ( [email protected])
    http://webtrans1.com | high-end web
    design
    An Ingenious WebSite Builder:
    http://sitelander.com

  • Scheduled delivery print apps font size. Can it be enlarged?

    Is there any way to enlarge the font size for scheduled delivery print apps?  The print is really small.

    MWH811,
           The answer is most likely going to be no on this question, but I would like to do some research on it, so can you name the specific apps you are referring to?
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say Thanks
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • When I create a stickie note, I can not save any font size other than the default.  How do I save a stickie with a larger or different font?

    How do I save a stickie note with a different font size other than the default?  When I create a note and save it using a larger font, it reopens with the default.

    Unlikely, I'm afraid.
    The LMS has no control over the playbar that pauses or plays the Captivate content.
    In a Multi SCORM package, the LMS also may be showing a TOC in the SCORM player with links to launch the lesson modules.  This TOC is in addition to the TOC inside the Captivate project file which gives access to sections of the module by jumping to slides that begin those sections.  But the LMS doesn't usually give you any control over the look and feel or functionality of that TOC either. 
    If your client is adamant that they want complete control over these areas, then your best option may be NOT to build this course with Captivate but build it from the ground up with another tool.  E.g. Flash, or Dreamweaver.  Either way, that will add a lot more time and expense to the project.  But if the client has the budget and is unwilling to budge on their requirement, then that's what I would be telling them to do.

  • Why do styles NOT hold their font size?

    I've learned how to set styles and am now applying them to a document, but I've noticed that the font size is not holding. I'm using Cochin in 10 point for a section that is two columns of text with some poetry lines here and there. I've checked the styles to make sure font size is set, but the paragraphs slip into 11 and don't hold at 10.
    Now that I'm committed to using Pages instead of Word for this book project, I hate being bogged down by this problem. Any suggestions welcome/
    Pam

    There are several types of styles, character, paragraph and list styles. Paragraph styles effect the whole paragraph. Character styles effect only the selected text.
    It sounds as if you are looking for character styles:
    • Select the text that is in the format you wish to emulate.
    • Open the styles drawer and click and hold down the plus sign until the choice between character and paragraph styles appears. Choose 'create character style from selection' and save it in the name you wish.
    To apply a character style, select some text and click on the character style you created. You can change styles like this within a paragraph.
    Kurt

  • Font Book will not print multiple fonts

    I am having an issue with Font Book.  I can print one font at a time but if I select multiple fonts (from a collection) it will not print, it just locks up and the print dialog box never opens.  Does anyone know why or is there another free application that will print fonts?

    Font Management in OS X

  • HP 6510e not printing custom paper sizes

    I have recently purchased a HP Photosmart 6510e printer. I called HP Tech support from the store where I bought the printer and specifically asked if this printer would print custom paper sizes. I was told it would. I tried to print an invitation on a paper size of 5.5  X  8.5. The printer keeps giving me an paper mismatch error. The paper size shows up in the list of paper sizes, but has an exclamation Point beside it. If I click on teh paper size it changes to 8.5 X 11.
    i am using a PC with Windows 7 OS.
    Thanks.

    Hi,
    The Officejet 6510 software drivers for Windows does not have an option for custom paper sizes. I checked for the paper size (5.5x8.5) you were trying to print on and it is not an option under the paper sizes. The only option is probably to have your printer replaced with a comparable Laserjet printer. Laserjet printer have a different software package and the one I checked (Laserjet Pro M275) has a Custom option. 
    Here is a link to a list of Laserjet printers
    http://shopping2.hp.com/en_US/home-office/-/products/Printers/HP%20LaserJet
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • Any way to not print certain fields?

    Using acrobat Xi pro I'm creating a form with multiple fill in text boxes and drop down boxes. I'm trying to figure out a way to have the form not print the unused / unfilled boxes.  I've tinkered with the show/hide and it's not working and my knowledge of javascript is VERY limited, could anyone give me some help or point me in the right direction here? 

    I poorly explained what I was trying to do but you solved most of the problem, which was the drop downs.  Putting a space as the default option cleared it for me, which fixed that problem
    One of the pages has a 6 groups of  text fields for names / addresses / etc.  Each field has a label above it.  If the address field is blank, is there a way to hide the text I've typed above the empty field.  That way when I print it only prints the labels / fields that are filled in and the rest shows up blank, if that makes sense

  • Photoshop elements not printing correct image size

    My photoshop elements 12 prints images larger than called for by the settings. A 3" square image, for example, printed at "actual size" comes out at about 3.5 inches. This is a new problem, as I've use PSE for years without it happening. I figure I must have unknowingly changed a setting somewhere, but can't figure it out. Any suggestions?

    I did that, and also reinstalled PSE, both to no avail. Here's a shot of the print dialog. I don't know where the numbers shown by my arrow came from, or how to change them, but when I print the page, and the photo I am printing, are scaled up to 11x8.5, thereby expanding the image proportionately. This particular image is 3x2 inches actual, but comes out 3.75x2.5 inches. There seems to be a built-in border of some sort that I've never had to deal with before.

  • Can not change the font size in a new text into the smartforms

    Hi!!
    I have a Footer window into my smartform and I've created a new text into this one
    text type: Text element
    nothing extrange.
    I copied and paste a text from a word document and after that I want to change the font size to 8 and font style to Arial, but after saving the font size and styles goes back the 10 and Currier New.
    Any idea?
    I also tried typing the hole parragraph and I get the same issue!...
    Thanks.

    Hi
    First Reset paragraph and Character and then set the new fontfor the same.
    dont copy the same into word and back form
    also goto change editotr and check the style used for the same.
    Regards
    Shiva

  • Does not print the full size of a pdf

    Hello - printing problems
    This used to work just fine now it does not.
    When i print a pdf document it is 25% of the normal size.
    I do not have this problem with any other type of file.
    Can someone assist/
    Thank you,
    Tom

    I am printing a pdf file. I issue print using the command and p, then select my printer. If I view the Pdf it is still about 25% or save it and the view or print still the same issue.
    Can you assist

  • HP Envy4500 Printer. Will only print certain fonts.

    Windows 2007
    I cannot get the printer to print on common fonts such as aerial or times new roman.
    Is there a way to change this or is there a limited number of fonts that work on this printer?

    Hi larryhogan100,
    I wonder, does this issue occur when you copy? I have a feeling the issue is stemming form the computer and not a limitation of the printer. I would like to recommend you remove the driver from the Printer Server Properties and re-add it. Please use the instructions below.
    1. In the ‘Devices and Printers’ folder
    2. Choose ‘Print server properties’.
    Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
    Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
    Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
    3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
    4. Choose the printer you want to uninstall and click ‘Remove’
    5. Choose 'Remove driver only'
    6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
    If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
    After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software. If you do not see HP Setup and Software, click on the printer icon and the Setup and Software will open. Here is an image of the screen we are looking for. 
    Click on 'Connect a new Printer' and follow the on screen instructions.
    Please let me know if this resolves the issue, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Will not print to actual size

    Hello,
    I am brand new to any Photoshop program, and am trying to design in Elements 10, that came with a printer I recently purchased.
    I created a new file and set it with a white background, 300 pixel/inch (default?), and at 10.625 inches wide and 7.375 inches in height.
    When working, I enable the rulers, and can see that indeed, the file is at the above dimensions. However, when I go to print and select to print at the actual size, it always comes out of the printer at 10.25 inches wide. The height is always fine, exactly as I have specified. But the width is always too short by the same amount. I have attempted to print at a custom size instead of actual size, and then set the custom dimensions to my desired W and H. Same result. The height is fine, the width is 10.25 inches.
    As I noted, I am new to all of this! I am sure there must be any easy fix . . . something I just don't understand. Please help!
    As a few extra details, just in case it matters, I am using a MacBook Pro OS X 10.6.8 and the printer is an Epson 1430 Artisan. The printer drivers should be completely updated, as I just went through all that on the phone with them last weekend when the Epson had trouble communicating with the MacBook Pro.
    Thank you in advance for any help!
    -Fisheye
    EDIT: I even increased the size of the project under image > resize to a full 11 inches. It still will only print to 10.25 inches. 

    Thank you, hatstead.
    Indeed it was a printer issue, not an Elements 10 issue. The printer will print borderless at 8.5x11, but I was unfamiliar with the settings. Thanks!

Maybe you are looking for