Ll / seeking FREE open source JSP / JSF Web application Tomcat/5.5.15

hi all,
We have a need to set-up a web site for a community based (non profit organisation) football / soccer) club.
The web hosting machine is based on JSP / JSF running on Apache Tomcat/5.5.15 & Sun Microsystems Inc. VM 1.5.0_06-b05.
OS is Windows 2003 V 5.2
The database backend is based on MySQL, mysql-essential-5.0.18-win32.
We need to add content related to:
a) Players contact details;
b) Teams;
c) Match reports;
d) News;
... and other dynamic content
We are looking for an out-of-the box FREE open source Web application we can deploy on the web hosting machine.
Any suggestions will be appreciated.
Thanks
Trajano

I haven't tried ICEFaces or JBoss seam or Apache MyFaces, so I can't really compare them.
ICEFaces appears to be a nice framework/tool from looking at their site, even though it's open source I think one has to pay for support, you might want to take that into consideration while making your decision.
Apache MyFaces, is fully community driven - so you get free support from the community.
I don't know about JBoss seam.

Similar Messages

Free open-source WIG (Wireless Internet Gateway)

Hello guys
I'm ttrying to develop a system that anables communication between the cell phone and the web server via sms (sms platform). Don't you guys know of any free open-source WIG gateway that is readily available for downloads?
Also, is there anyone here who has developed this type of system? how did you do it? any advices or suggestion.?
thank you to tou all of you in advance.
best regards
nomnganga
[email protected]

I am not an expert, however, I have noticed very similar issues with the 2Wire equipment. I visit a local coffee shop daily and was perplexed why my MacBook Pro was successfully connected with a strong signal but would have a self-addressed IP address for up to 10-min. Other times, the whole network would go down when a new computer would connect, usually mine.
After reviewing the topic, once again, I am coming to the belief that it is just the 2Wire Gateway that is at the center of these issues. My suggestion is to get a separate modem and wireless router. I am also with AT&T at my home and I use their Motorola SpeedStream modem and a Netgear Router. I cant say that I never have issues, however, at most, I get some easy to resolve problem come up once a month or so.
Best of luck to you...

Free / open source Closed Captioning software?

I'd like to add closed captions to a feature film I produced. I understand the difference between closed captioning (which is embedded in the video and decoded by the TV) and DVD subtitles, and I would like to add real closed captioning.
Is there any free / open source Mac-compatible closed captioning software I can use to add captions to my feature film and create a .cc file for importing into DVD Studio Pro?
I'm more than comfortable with steep learning curves and X11 interfaces. If I have to use a text editor and timecodes, that's fine too. I just need that .cc file to add true closed captioning to my video, and I don't have the dough for commercial CC software.
Thanks!

my company does offer closed captioning as a service, Kelly is correct when he says the software is very expensive. as far as creating a .scc file with a text editor, i don't believe it is possible but i may be wrong. when opening a .scc or .cc file in a text editor, it does look like a bunch of "gobbledygook". but the .cap file that is used to create the .scc or .cc file looks a bit more manageable and could possibly be created without captioning software, again i may be wrong and have never attempted to do it. but say you could do it, you could save a bunch of money by creating the .cap file and giving it to someone who has the software to convert it to .scc or .cc. if that seems overwhelming and want to job it out, you could save some money by transcribing the video yourself which is a significant part of the cost when outsourcing. here is a sample of what a .cap file looks like:
~CPCC6.70~;Upper;PopOn;01;
00:00:48:06³0CEN³WELCOME TO.
00:00:52:08³0CFN³
00:00:53:23³0C2N³(CHOIR SINGING)
00:01:00:26³0C1N³
00:01:25:25³0C1N³I WANT TO SAY HELLO TO\THOSE OF YOU THAT ARE WITH US
00:01:28:24³0C1N³RIGHT NOW ON THE INTERNET\ALL OVER THE WORLD.
00:01:31:17³0C1N³IT'S SO WONDERFUL TO HAVE CHURCH\MEMBERS THAT HAVE MOVED ON.
00:01:35:25³0C1N³I GOT A CALL TWO WEEKS\AGO FROM A FAMILY THAT MOVED

New free/open-source tool to encapsulate the OCI interface

Hello,
Here is a short presentation and a link to a new free tool available on soureceforge.net.
This tool is a powerful "wrapper" to encapsulate the OCI interface:
Introduction
OCILIB is a free, open source and platform independant library, written in C, that access Oracle Databases.
The OCILIB library :
* Encapsulates OCI (Oracle Call Interface which is powerful but complex)
* Hides OCI complexity
* Proposes instead a simple, readable and reusable API
* Offers up to 310 simple and straightforward APIs.
Introduction
Current version : 2.3.0 (2008-03-30)
Main features
* Data binding
* Integrated smart define and fetch mecanisms
* Full Unicode support on all platorms
* Multi row fetching
* Binding array Interface for fast and massive bulk operations
* Reusable Statements
* Connection Pooling
* Global Transactions
* Returning DML feature support
* ROWIDs support
* Named Types (Object types) support (User or Builtin)
* Cursors
* PL/SQL blocks
* PL/SQL Ref cursors and Nested tables
* LOB (BLOBs/ FILEs)
* Supports lobs > 4Go
* Long datatype (piecewise operations)
* Provides "All in one" Formatted functions (printf's like)
* Smallest possible memory usage
* Date/time management
* Timestamps and Intervals support
* Error handling
* Describe database schema objects
* Access columns by index or name
* Hash tables API
* Portable Threads and mutexes API
* Supports static / shared oracle linkage
* Support runtime loading (no OCI libs required at compile / time)
* Great performances (straight OCI encapsulation)
Download
Get OCILIB from OCILIB Project page at Sourceforge Website:
http://orclib.sourceforge.net/
Hope this would help some of you ;D
Francois

Don't give up just because there are other options out there.
Adobe is only giving up the free tool for education purposes, or unemployed developer. You didn't say if you were one of those.
I believe over time there will be plenty of room for alternate IDE approaches that support the Flex Framework; and in fact there are quite a few options already out there.

Free/open source plotting software

The objective:
Data processing, mostly one X and one Y axis, recorded from sensors.
Formatting, to change how the chart looks, e.g. fonts of the axis label, weight and dashed lines of the plot, addition of lines or arrows.
What's been found:
Gnumeric and google spreadsheet.
There is a wonder what the Free/open source software users among the research people are using. I ran into LaTeX and thinks it's a good software. Anything like this would be nice.
Thanks.

Fine. I found QtiPlot working really well on Linux systems with ease of availability free of charge. No flame setting (as I think Mac OS and linux are both Unix-like), but it's a bit hard to compile on Mac OS X.

Is mysql a free open source database or do you need a license for it in prd

is mysql a free open source database or do you need a license for it in production.

Hi,
It should be free under GPL (General Public license).Usually it will comes with your operating system distribution (eg:RHEL)
If you download it from Oracle site, it should have the commercial license tied to it, and you need to pay for that if it is in use for production.
http://www.mysql.com/about/legal/licensing/index.html
regards,
mrak

Creating a JSF Web application from scratch.

hi,
i have created a JSF web application, but not from scratch i had to use a jsf example included in the final specification of the JSF download, as a template to create my own application, by deleting and editing the example files with my own.
i tried to do it from scratch including all the settings, parameters and files that should be in place, but i sill get an error when starting the app in tomcat.
Unfortunately i dont have the error listing anymore since i have got around the problem through alternate path. however i do remember that it came with cannot find FacesServlet, or something to do with the FacesServlet.
if anyone could shed some light on this it would be really great because it so frustrating.
many thanks.
dharam

cannot find FacesServlet, or something to do with the FacesServlet.It might appear not because you have a wrong project structure, but because you point to the entry jsp file directly without using the servlet mapping in your URL. Check this first.
Sergey : jsfTutorials.net

Jsf web application has to be restarted everytime a broken pipe exception

Hi,
My jsf web application using tomcat is experiencing a sql exception "java.sql.SQLException: System or internal error java.net.SocketException: Broken pipe" when it tries to connect to database.
Everytime this exception happens I have to restart the application and the application runs fine then.
Is there a way to handle this exception that we don't have to restart the application.
-kap

It depends....
How do you have (where) the connection, how you obtain them, etc?

Access an Application Module Client Interface in a JSF Web Application

How to Access an Application Module Client Interface in a JSF Web Application
I use this code but class ValueBinding is deprecated in JDeveloper11g
FacesContext fc=FacesContext.getCurrentInstance();
ValueBinding vb=fc.getApplication().createValueBinding("#{data}");
BindingContext bc=(BindingContext)vb.getValue(fc);
DCDataControl dc=bc.findDataControl("SRServiceDataControl");
ApplicationModule am=(ApplicationModule)dc.getDataProvider();

user581394,
JDeveloper 11 and the introduction of ADF Faces RC introduces a new dependency, which is JSF 1.2. The createValueBinding on the FacesContext object is deprecated in JSF 1.2. To resolve an expression in JSF 1.2 use the following method or something similar.
    public static Object resolveExpression(String expression) {
        FacesContext facesContext = getFacesContext();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp =
            elFactory.createValueExpression(elContext, expression,
                                            Object.class);
        return valueExp.getValue(elContext);
    }--RiC

Opening template issue in Web Application Designer (Loading problem)

Hi,
When i open a query in Web Application Designer through the BWdev, it is opening but when i open a query in Web Application Designer through the BWProduction it is not opening, it is displaying a msg box like this
" Operation Failed! NO detailed error information from backend available ".
In the opening of the webtemplate itself it is showing that box when loading mime type imgs.
If anybody knows pls send msg.
Thanks & Regds,
Giri.

Hi Giri,
I have a similar problem ...
when I give the user SAP_ALL security profile,
the problem is gone,
but I DON'T want to do that...
can you please specify how to give full authentication access to WAD only
thanks a million!
Edwin

The FREE & OPEN SOURCE Mac OS...

UNIX is unanimously recognized as the best operating system. Today, all UNIX are free and open source, with the exception of Mac OS... Sun Microsystems is the latest must to have produced free and open source OS, what allows thousands of developers to analyze every line of code and to correct the faults. We obtain in this way an almost "perfect" OS... This method of development proved its superiority with Linux. The Linux kernel contains 5 times fewer errors than all other UNIX... The open source of Mac OS as well as the free distribution would give an ENORMOUS ADVANTAGE onto all others UNIX... Mac OS is compatible with of numerous commercial softs, what is not still the case for Solaris, BSD, Linux, etc... Every administrator as well as the end users will install Mac OS on their computer to take advantage of the UNIX power, and the software compatibility... We obtain the PERFECT platform...! I think that Mac OS can become the BEST OS in the world, so only Apple not keep in the confidentiality their baby... Do not forget that you are the LAST ones not to have opened TOTALLY your OS...!
Other OS

> UNIX is unanimously recognized as the best operating system
Widely, but not unanimously.
As for the rest of your argument...
Mac OS X is built on top of Darwin. Darwin is Apple's UNIX bed and that is already open source. You can download and build your own Darwin environment as you like:
http://www.opensource.apple.com/darwinsource/
Apple also open source many of the elements of Mac OS X - theunderlying technologies such as Bonjour, Open Directory and more:
http://developer.apple.com/opensource/index.html
What they don't open source is the UI layer - Aqua and its associated parts, but that's a whole different issue, and maybe the reason to own a Mac. If you could download Mac OS X (including the UI) and build your own copy on your commodity hardware then you could say goodbye to Apple's hardware business. People are prepared to pay extra for Apple's superior industrial design, but there are limits.
It's arguable that Apple's hardware is an intrinsic part of the Mac experience. If you take that away then what incentive is there to use a Mac?

Does any body have any design patterns of JSF Web Application Developping?

Can any one answer me some questions?
#1.I am an amatuar of people who develop Web Application.For some reason,We choose the JSF to develop our item.through some introduction,I know the UI component of JSF is resided in Server side,is it right?but I am a little confused that:if there are many users who are exploring our jsf website.(to simplify my question,image I had just one web page and just one button)How many UI components(buttons) will be there?How it(they?) works?
#2.Does any body have the success experience (for example design pattern)to develop web applications?if We just concern about the Add,Delete,Modify,Query operations of some data.
I just do my job according to my feeling.
I will give every page a pagebean(backing bean),and I am not sure how to combine the business data with the pagebean.some one suggested that I should use delegate pattern to separate my business log and page logic.But I am still confused by following things:
#2.1 does JSF have the same ability to help us construct the model dialog just like swing to
help us control the operation flow?
#2.2 If there is not,Does the following way work?I put every tabledata's property as corresponed component.if user choosed the row in the table,My Listener will syncronize the row data to the components.But
#2.2.1 if JSF has the components according to the web users' number,how can My Listener tell which component should be update?Should I maintain the map?
#2.2.2 If the problem I imaged above is false,Does any body can tell me how to custom the ListDataModel,so I can use it like Swing?because now I can just use some view data to insert into ListDataModel,but after some selection operation,my business object must be find according to the selected data,it is not an interesting job!
I am waiting for your advice!

Ok I'll try to explain Step by step please correct me if I make any mistake because I have not played much with shared variables.
To create a shared variable to an RT target go to the target if tou have already otherwise add an RT target by right clicking the Project>>Add targets and Devices
Then in the target Right clikc and select the variable as shown below.
Then once the Shared variable settings window opens Enter a variable name and then Select the type "Network Published"
In the right side you can select the data type for the shared variable and even you can choose your custome controls.
After selecting the data type go for the Network and select buffering if required else leave it if you are planning to use the variable just for display purpose.
Then you can enable the RT FIFO if required (Not able to explain how it works and why it is used).
Then after completing the Shared variable setup you can access the variable in the VI in both the Host and the RT.
You can bind the variable to a control so that if any data from the RT is coming you can read the data from that control.
Once you have placed your shared variable in the BD you can change the access typr to read or write depending on your need.
This might not explain the complete shared variable concept but I believe that this would defenelty give you a kick off to start using the shared variable. Please correct or add more comments if anybody know better.
Good luck.
The best solution is the one you find it by yourself

The best/clean/free approach to moving SharePoint Web Application between environments?

Hello Forum,
I have an environment e.g. (Environment1) Web Application that contains 90 site collections (Including: Lists, Libraries, Workflows, and custom solutions), and its URL is (http://Dept.Company.com/)
I must move this entire Web Application from the source: Environment1 to the destination: Environment2.
What is the best and safest way to accomplish that without using any commercial migration third party tools ?
What I have in mind right now is as below:
Obviously, I cannot backup and restore all these 90 site collections back and forth between the source: Environment1 to the destination: Environment2. This is very impractical and inefficient.
I thought about Web Application backup, e.g.
Backup-SPFarm -Directory <BackupFolder> -BackupMethod {Full | Differential} -Item <WebApplicationName> [-Verbose]
Restore-SPFarm -Directory <BackupFolderName> -RestoreMethod Overwrite -Item <WebApplicationName> [-BackupId <GUID>] [-Verbose]
But, I am not sure if it the way to go or not? I am a bit concerned about GUID and running into unlimited problems. What do you think?
In case if I followed the: Backup/Restore-SPFarm, Should I create a Web Application in the destination: Environment2 and the URL must be 100% identical to the source: Environment1?
Well, I would love to hear your thoughts about the best practices and recommendation considering my scenario.

Hi mate, firstly you could use the method you mentioned, In any method if there is code using GUID references instead of by Name you will run into problems and hence you should do a full prior investigation and analysis to find out any custom code dependant
on GUIDS and custom solutions required etc, I would personally just take a SQL backup of the content DBs for the web application or dettach them and move them to the new source sql server(if any), create a new web-application in Env2, create the respective
managed paths, install all custom solutions that need to be installed against this web-application in the new farm, go to manage content dbs and here add the existing content dbs(the backed up ones), make one of them or the only one(if there is only one) default
and remove the empty current default content DB. URL is on the IIS end, so you can rebind the existing URL to the new web-front-ends however the load-balancer(if any) or HOST A entries need to now point to the new web-front-ends. If you use https or using
SSL you need to get the cert re-issued for the new servers and load them on the IIS and use them for URL binding. To test no you do not need the same URL, however you will need to add the new path(e.g.
http://server2:81 to the alternate access mappings for the new web-application), then lets say if you have a site called Site1 you can try after migration doing
http://server2:81/Site1. I would highly recommend doing a trial migration with backedup content DBs in Env2 and go through the findings and document them for the actual one, the thing to look for are the custom solutions
and custom code etc and getting the ssl certificates sorted for the new WFEs, if the same URL is not needed, i.e. the new ENV2 is only for UAT or testing then you don't need to use the same URL, however once again if code has hardcoded it somewhere you will
need to analyse that and fix it before or after migration. So there are some pre and post steps involved. Hope that helps. thanks.

Open OBIEE report from web application

Experts, I want to open OBIEE report from a web application. I have a question regarding the security here. Say I login as 'USER1' in web application, I would have to pass 'USER1' in nquser parameter. Correct? Also, this report has access to 'Sales Group' users only. So, does 'USER1' in web application need to be assigned to 'Sales Group'? Or, any user in the web application can open this report as long as I pass nquser in the GOURL.
thx,
parag

You don't need to specify group details.
When the report hits OBIEE, it will determine the permissions based on the nquser.
Hope it helps.

In a JSF Web Application

Is there anyway in the .JSP, Javascript or Backing Bean to iterate over all the files in a directory on the server?
I want to iterate over all the files in my images directory
development
http://localhost:8080/<app name>/images
production
http://<domain>/images
Something like the like what Alex Wong is doing here... but as I say in a Web Application
http://www.javapractices.com/Topic68.cjp

The why is that I would like to be able to put up some image files, then when the user clicks to go to a certain page, that directory would be read and the thumbnails of the images in that directory would be displayed. I'm doing this to a degree currently in a javascript, accessing the directory via www.<domain>/images, but in the current case, the names of the files are already known.
That's why I need to be able to iterate over any files that are in the directory, not just known files.

Ll / seeking FREE open source JSP / JSF Web application Tomcat/5.5.15

Similar Messages

Maybe you are looking for