Lm sensors not getting info from intel board
Greetings,
I am having the same issue that was posted here in 2008 but i can't seem to find a resolution:
http://www.spinics.net/lists/lm-sensors/msg21829.html
does anyone know how to get the intel dp35dp to work with lmsensors?
thanks!
Adam
the mobo is a dp35dp and the suspected chipset is ICH9 internal, but when i manually loaded the i2c-i801 module it didn't work.
[edit]
I also tried it87 but got the following error:
sudo insmod it87.ko
Error: could not insert module it87.ko: No such device
[/edit]
[edit2]
so i ran sensors-detect again and realized i missed this before:
Found `Nuvoton WPCD377I Super IO'
(no hardware monitoring capabilities)
google isn't very helpful for this error (partially because i'm not 100% sure what to look for
[/edit2]
Last edited by adambot (2012-08-22 22:41:21)
Similar Messages
-
SWF-file not getting info from UI
Hi All,
I have a dialog that loads a flash-file. This swf-file gets info from my dialog and puts it in a datagrid.
It works well, untill i try it the script on an other computer. The swf-file loads but is not receiving any information given through the UI.
Is it a matter of installing extra options/software on the other pc?
My computer (the script works) is a Windows XP with Adobe Design Premium.
The other computer is also a Windows XP with indesign and flash player installed.
Is there anyone who has an idea?
THANKS
Greetz,
GlenOk, i have the answer to my own question.
I forgot that i had to change the settings in the settings manager of the flash player. -
Computer not getting info from mp3
I hope someone else has had this problem. All of a sudden my computer is not displaying any of the info in my zen moziac. I need to make space, arrange playlists and all the software ( both creative central and windows ) does not show the info in my mp3. It only seems to show some recent stuff i loaded to both computer and mp3. I have playlists and it shows only one in the mp3 and 3 in the computer. So in short I am unable to view all of my info to delete add or rearrange.
Are you using the factory charger or a 3rd party? I used to have a 3rd party charger that would not wake my powerbook from sleep. The only work around I could find was to pull the power and battery, then wait for the sleep light to stop flashing (5 minutes or so), plug the power and battery back in, and then it would boot (though at that point it is no longer "sleeping" and will perform a cold boot). Another option would be to try resetting the PMU. If memory serves me correctly, you removed power and the battery, hold down the power button for at least 5 seconds, then reapply power and boot.
Good luck.
G -
Dispatcher yellow,J2EE status info unavailable,Could not get file from DB
Hello Experts,
I have successfully installed a ECC 6.0 server-ABAP +JAVA system (DB2 v9.5 FP4 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
I already tried Notes 784568 and 997510
Relevant logs:-
jvm_bootstrap.out
=================================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
Attempt to fully materialize lob data that is too large for the JVM.
Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
==============================================================================================
dev_jcontrol
=============================================================================================
Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c 913]
[Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c 1749]
[Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 273]
[Thr 4360] JControlCloseProgram: started (exitcode = -1)
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
=================================================================================================
log_bootstrap_ID0140026.0
==========================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
============================================================================================
Eagerly looking forward to a solution from you experts..
Thanks,
RakeshHi,
I am facing the same related problem with ECC 6.0.
My dispatcher started it is showing yellow- dialog queue standstill, J2EE status info unavailable
after some time dispatcher has stopped.
Please check my below trace file for dispatcher:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid DEV
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 114
intno 20050900
make: multithreaded, Unicode, optimized
pid 13108
Fri Nov 27 02:31:55 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 114 successfully loaded
shared lib "dw_xtc.dll" version 114 successfully loaded
shared lib "dw_stl.dll" version 114 successfully loaded
shared lib "dw_gui.dll" version 114 successfully loaded
shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Fri Nov 27 02:31:59 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdev_DEV_03 <
DpShMCreate: sizeof(wp_adm) 15800 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 08290040, size: 4889440)
DpShMCreate: allocated sys_adm at 08290040
DpShMCreate: allocated wp_adm at 08292090
DpShMCreate: allocated tm_adm_list at 08295E48
DpShMCreate: allocated tm_adm at 08295E78
DpShMCreate: allocated wp_ca_adm at 0869F2B8
DpShMCreate: allocated appc_ca_adm at 086A5078
DpShMCreate: allocated comm_adm at 086A6FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08727E78
DpShMCreate: allocated gw_adm at 08727EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08727EE8
DpShMCreate: allocated wall_adm at 08727EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Nov 27 02:32:00 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 13356
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2919
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Nov 27 02:32:01 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Nov 27 02:32:05 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Nov 27 02:32:40 2009
ERROR => W0 (pid 13364) died [dpxxdisp.c 14441]
ERROR => W1 (pid 13372) died [dpxxdisp.c 14441]
ERROR => W2 (pid 13380) died [dpxxdisp.c 14441]
ERROR => W3 (pid 13388) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 13396) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 13404) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 13412) died [dpxxdisp.c 14441]
ERROR => W7 (pid 13420) died [dpxxdisp.c 14441]
ERROR => W8 (pid 13428) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 13436) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 13444) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:50 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Nov 26 21:02:50 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 13364 Ended no 1 0 0
1 DIA 13372 Ended no 1 0 0
2 DIA 13380 Ended no 1 0 0
3 DIA 13388 Ended no 1 0 0
4 UPD 13396 Ended no 1 0 0
5 ENQ 13404 Ended no 1 0 0
6 BTC 13412 Ended no 1 0 0
7 BTC 13420 Ended no 1 0 0
8 BTC 13428 Ended no 1 0 0
9 SPO 13436 Ended no 1 0 0
10 UP2 13444 Ended no 1 0 0
Dispatcher Queue Statistics Thu Nov 26 21:02:50 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Nov 26 21:02:50 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Nov 26 21:02:50 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:55 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdev_DEV_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (13340) (SOFT_KILL)
Stop icman
killing process (13348) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:13340 HANDLE:1564)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:56 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:13340 HANDLE:1564)
wait for end of icman
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:57 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:58 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:59 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Please help me to start my SAP MMC.
Thanks -
Could not get IOR from Domino Server while provisioning Lotus Notes
Hi all,
There are two servers that have OIM installed, development server and test server. From development server, we can
provision to Lotus Notes just fine. But for test server everytime when
provision to Lotus Notes. There will be an exception
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
From test server
I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
I can telnet to 10.3.100.61 63148
I can use connector testing program and it work fine
All configuration and jar files are the same as development server
There is no firewall or antivirus running in both systems.
Both server is virtual server using VMWare.
OS: Windows2003R2 Enterprise
DB: Oracle 10gR2 10.2.0.2
AS: Oracle AS 10g 10.1.3.3.0
OIM 9.1.0
Lotus Notes Connector 9.0.4.2
Thank you.
Satit
The error is as below
=================================================
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
08/11/11 11:24:26 Running setTimeoutParameters
08/11/11 11:24:26 Running Connect
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
at lotus.domino.NotesFactory.getIOR(Unknown Source)
at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
at lotus.domino.NotesFactory.createSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
... 45 more
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
at lotus.domino.NotesFactory.getIOR(Unknown Source)
at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
at lotus.domino.NotesFactory.createSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
... 46 morecheck if DIIOP service is turned on at the Lotus Domino side...
Oleg. -
How to get info from a layer which is applied with styles ?
How to get info from a layer ? such as ( apply style or not , which effect have applied on it etc..)
I really can't solve it , Who can hlep me.. By the way , I 'am using CS version.xtools/xlib/Styles.js has a set of functions for working with layer styles. I do not know if it works with CS. I wrote it several years ago for either CS or CS2. If this doesn't work, then nothing will. The script retrieves a layer's style by saving it to disk then parsing the file for the desired ActionDescriptor.
There is a function at the bottom of the file that tests the Styles.js API.
Styles.test = function() { var doc = app.activeDocument;
var layer0 = doc.artLayers[0];
var gdesc = Styles.getLayerStyleDescriptor(doc, layer0);
if (!gdesc) {
alert("There is no layer style associated with the layer");
return;
// this will set the layer style to another layer.
// var layer1 = doc.artLayers[1];
// Styles.setLayerStyleDescriptor(doc, layer1, gdesc);
if (!gdesc.hasKey(cTID('FrFX'))) { // look for a stroke effect
return;
var frfx = gdesc.getObjectValue(cTID('FrFX'));
if (!frfx.hasKey(cTID('Clr '))) { // look for the color
return;
var clr = frfx.getObjectValue(cTID('Clr '));
// we should really check that the objectType is RGBC
var r = clr.getDouble(cTID('Rd '));
var g = clr.getDouble(cTID('Grn '));
var b = clr.getDouble(cTID('Bl '));
if (r == 0 && g == 0xFF && b == 0xFF) {
return;
clr.putDouble(cTID('Rd '), 0);
clr.putDouble(cTID('Grn '), 0xFF);
clr.putDouble(cTID('Bl '), 0xFF);
frfx.putObject(cTID('Clr '), cTID('RGBC'), clr);
gdesc.putObject(cTID('FrFX'), cTID('FrFX'), frfx);
Styles.setLayerStyleDescriptor(doc, layer0, gdesc); -
L2L issue, the tunnel does not getting up from one direction
Hello,
We have configure a L2L vpn between Asa and 1841 router. We are facing this issue.
The tunnel is not getting up from the 1841 site never. When we are trying to generate traffic from the ASA site the tunnel is up and we can see decryps and encryps packets.
Router 1841 Config:
crypto isakmp policy 100
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key * address 213.249.XX.XX
crypto ipsec transform-set XXXXX esp-3des esp-md5-hmac
crypto map EKO_BG 100 ipsec-isakmp
set peer 213.249.x.x
set security-association lifetime seconds 28800
set transform-set XXXXX
set pfs group2
match address 111
interface FastEthernet0/0.2
encapsulation dot1Q 3338
ip address 212.200.30.130 255.255.255.252
ip nat outside
ip virtual-reassembly
crypto map XXXXX
ip nat pool nat_pool 93.87.XX.XX 93.87.XX.XX prefix-length 29
ip nat inside source list 101 pool nat_pool overload
ip nat inside source static 10.70.2.10 93.87.18.161
ip nat inside source static 10.70.25.10 93.87.18.162
ip nat inside source static 10.70.36.5 93.87.18.163
ip nat inside source static 10.70.39.10 93.87.18.164
ip nat inside source static 10.70.5.10 93.87.18.165
access-list 101 deny ip 10.70.200.0 0.0.0.255 any
access-list 101 permit ip 10.70.0.0 0.0.255.255 any
access-list 111 permit ip 10.70.200.0 0.0.0.255 172.40.10.100 0.0.0.3
Asa Config:
access-list inside_nat0_outbound extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
access-list outside_cryptomap_320 remark xxxxxxx
access-list outside_cryptomap_320 extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
access-list inside_pnat_outbound_V5 extended permit ip host 10.8.x.x 10.70.200.0 255.255.255.0
pager lines 24
nat (inside) 9 access-list inside_pnat_outbound_V5
crypto ipsec transform-set xxxxx esp-3des esp-md5-hmac
crypto map mymap 150 match address
crypto map mymap 150 set pfs
crypto map mymap 150 set peer XXXXXX
crypto map mymap 150 set transform-set XXX
crypto map mymap 150 set security-association lifetime seconds 28800
crypto map mymap 150 set security-association lifetime kilobytes 10000
crypto map mymap 320 match address outside_cryptomap_320
crypto map mymap 320 set pfs
crypto map mymap 320 set peer XXXXX
crypto map mymap 320 set transform-set XXXXX
crypto map mymap 320 set security-association lifetime seconds 28800
crypto map mymap 320 set security-association lifetime kilobytes 4608000
crypto map mymap 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map mymap interface outside
isakmp policy 150 authentication pre-share
isakmp policy 150 encryption 3des
isakmp policy 150 hash md5
isakmp policy 150 group 2
tunnel-group 212.200.x.x type ipsec-l2l
tunnel-group 212.200.x.x ipsec-attributes
pre-shared-key *
Please advise.
Thank you.hello Ashley,
thank you for this info. Now from the router site the tunneling is getting up and I can see packets but althought the tunnel is up it can not make telnet to our server (172.40.10.100) on a specific port.
We from ASA site can ping router Site and make telnet.
Any ideas???
Thank you all from your answers! -
Characterestics is not getting displayed from ODS in Multiprovider
I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
Excise rate and value is not getting defaulted from the purchase order
Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
VishalHi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs -
I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?
Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt -
Iphone 5 not getting text from new numbers?
im on ios 7.0.4. Recently, ive been having the problem of not getting messages from new numbers. I receive all texts and calls from all current phone numbers ive ever had contact with. But for the past month, any new numbers that text me first, i do not receive them. But if i text and or call them first, it works fine. Which isnt always a convinence. They sent me screen shots of my number and their text; they all have different phones on different services.
Perk123, this is a text messaging mystery! I'm on the case. I recommend that delete all unwanted text messages on your device and power it off/on to soft reset it.
You will also need to advise your friend that has the AT&T iPhone to reset the network on their device. This can be done by accessing Settings >General >Reset >Reset Network.
Lastly your friend needs to verify if your contact has been set up to block calls and text messages from your mobile number. This option is located in Contacts >your contact> Block this caller.
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
Data not getting fetched from Quotation to Contract
Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael ApplebyPlease add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG -
i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from itunes.
See Recover your iTunes library from your iPod or iOS device.
tt2 -
RFC problem: could not get functionname from XML requst (sic)
I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system. It's a very small simple interface, and it's all working until it tries to call the RFC. The error is
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
I've created an RFC channel, which is green in the adapter monitoring. The RFC imports without a problem, and appears in my interface mapping. My mapping program converts to the RFC message type (as evidenced in sxmb_moni. I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called.
Could anyone point me to what else I could check? I saw a post about the same error message, where the respondent found something in the logs which helped them Could you expand on what you found, and in which log please? Any pointers as to which logging options I could switch on and check would be gratefully received.
Regards
Alan GrahamThanks for the responses.
I set up a communications channel of type RFC, which is
showing green in the adapter monitor. If I deliberately
break it, eg by changing the password, the adapter shows
as red in the monitor. I assume therefore that the
adaptor settings are correct.
The XML going to the adapter looks correct AFAIK. My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient. In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
Also, the interface determination SOAP header, in the MAIN section includes
[code]<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>D04</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
</SAP:Receiver>
These are the correct values for the RFC name and the namespace, AFAIK.
I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC. The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
Alan
Maybe you are looking for
-
HT1459 ipod not recognized by computer or itunes, in recovery mode
Hi, My problems started when I wanted to install and use "NOOK" my OS of 4.3.3.1? was said to not be compatible with the addon! I was trying to add it via wifi because my computers kept failing to recognize or connect to it, neither did itunes. I the
-
How to adjust space between table lines in smartform
Hi experts, I created a smartform and use table to display content. But I find the space between 2 table lines is always wider than the space between to text lines. I'm using font 10, 6 lines per inch in the style. Is there any way to adjust the heig
-
Update sql 2012 database from access 2003
Hi, all, I have a new sql server 2012 and has already created a database same as the one from access 2003. Can someone give me a details or links how to update sql server 2012 through SSIS package? I know I could use import wizard but it is a custom
-
My ipad is froze with a message saying int has been two weeks since I update my icloud.
-
IPhone crashes during updates requiring restore & going over capacity
During the last two update 7.0.3 and 7.0.4 my phone failed mid update requiring a restore. This is a major headache. I am using an iPhone 4S and really don't have the time to keep having to restore the phone which takes a looooong time. Moreover wi