LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Hi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a®

Similar Messages

Note 916654 - LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Thanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Printing quality Is not clearly after Acrobat 8.1.2 Pro updating (HP Deskjet 9800)

*** The contents wrote with the auto compiler. (Korean -> English)
*** Meaning of the writing could not be delivered smoothly.
From Adobe Reader 8.1.2 Application Printing quality Is not clearly after Adobe Acrobat 8.1.2 Professional updating.
To previously there was not a problem to printing quality.
Like this problem gets why?
--- System
OS : Mac OS X 10.5.2 Leopard
App : Adobe Reader 8.1.2
Printer : HP Deskjet 9800 (Driver : HP web download v9.7 lastest or Leopard include)
App : Preview.app (Leopard Default Viewer) - Printng quality is good. But is not the Adobe Reader.
Adobe Acrobat 8.1.2 Professional update : 2008-02-20 (Korea)

Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

IOS 7 app store update list does not clear after updates have been installed

iOS 7 app store update list does not clear after updates have been installed

Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck.

HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?

HT1424 IPSec VPN connection brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help? thanks

IPSec VPN brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help?

Uggh, it's so frustrating! I've googled every search phrase I can think of and this seems to be the only thread describing this exact issue. I'm always automatically logged into Facebook on my MBP but just to be sure I logged out and back in and it worked fine.
I gotta say, I wasn't a fan of the Droid I had preceding this iPhone, and from what I hear the iPhone app for FB is a thousand times better - not that I'd know personally because I can't log in!! - but I could always access my FB account on the droid. Just sayin...

Roles not shown after entering SCCM 12 product key

Hi all,
We were using SCCM 2012 as evaluation and it was fully configured for our production environment.It was not used for some time and then we discovered that it has been expired so,now we have entered the product key.After entering the product key the problem
is that,when i browse to server & site system roles there are no role shown for sccm server.there are 3 server's in total :-
1>Server added for distribution point - there was 2 roles installed ,count of roles show 2 but roles are not shown in site system roles.
2>Data base server - 3 roles installed all the roles are shown in site system roles.
3>SCCM Server - there was 12 roles installed ,count of roles show 12 but roles are not shown in site system roles.
i tried to reinstall the roles but it's giving me the following error :-
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
   CauseInfo = "";
   Description = "Unable to get SQL data";
   ErrorCode = 3242528002;
   File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspobjectquery.cpp";
   Line = 932;
   Operation = "ExecQuery";
   ParameterInfo = "Select * From SMS_SCI_SysResUse Where SiteCode='Site Code' And FileType=2 And ItemType='System Resource Usage' And NALPath='[\"Display=\\\\\\\\SCCM server FQDN\\\\\"]MSWNET:[\"SMS_SITE=Site Code\"]\\\\\\\\SCCM Server FQDN\\\\'";
   ProviderName = "WinMgmt";
   SQLMessage = "[21000][512][Microsoft][SQL Server Native Client 10.0][SQL Server]Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.";
   SQLSeverity = 16;
   SQLStatus = 512;
   StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.SiteSystemsServerWizardForm.PostApply(BackgroundWorker worker, DoWorkEventArgs e)
   at Microsoft.ConfigurationManagement.AdminConsole.ProgressPage.backgroundWorkerPostApply_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Management.ManagementException
Generic failure
Stack Trace:
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.SiteSystemsServerWizardForm.PostApply(BackgroundWorker worker, DoWorkEventArgs e)
   at Microsoft.ConfigurationManagement.AdminConsole.ProgressPage.backgroundWorkerPostApply_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
Please help...
Thanks,
Pranay.

Is the SQL server running?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Time formatet string in thtmlb dropdownlistbox after enter key or tab key

Dear Collegues,
In our BSP-Application we use the thtmlb:dropdownlistbox. It's configured as you can see below in the code cutout:
DATA: wa_result type ZZPRBRS_PRSRG.
                  %>
                  <td>
                  <thtmlb:dropdownListBox id        = "DD_PREISREGEL"
                                          selection = "<%= DD_PREISREGEL %>"
                                          editable = "TRUE" >
                    <%
loop at APPLICATION->PRREG_TAB into wa_result.
                    %>
                    <thtmlb:ddlbItem key   = "<%= wa_result-PRSRG %>"
                                     value = "<%= wa_result-PRSRG %>" />
                    <%
endloop.
clear wa_result.
                    %>
                  </thtmlb:dropdownListBox>
As you can see the ddlb is set as editable.
So far so good.
But when we edit the entry in the box and leave the box with ENTER KEY or TAB KEY the controlle change the format of the entry to a kind of time format. Excamlpe:
We choose the entry GSVIES2 (one of the list entries) and we edit it to GSVIES22 the controll change it to 22:00. Longer entries will be changed to an entry like xx:xx:xx.
The wa_result-PRSRG for the entries is an char(12).
I found no notes about this issue.
Does anybody know this behave?
How can we avoid that changing after editing?
Kind regards
Thomas

Hi Thomas,
I was wondering, if you really want to have an editable DropDownlistbox, did they advise anything?
And, what do you think; should I go ahead and extent the THTMLB library with a ZDropDownlistbox which doesn't use the 'timepicker' javascript?
references to my questions:
BSP extensions: THTMLB
dropdownlistbox classes: CL_THTMLB_DROPDOWNLISTBOX, CLG_THTMLB_DROPDOWNLISTBOX
In the class: CL_THTMLB_DROPDOWNLISTBOX method IF_BSP_ELEMENT~DO_AT_END calls this JavaScript
*     Building a unique variable name (simply based on a new tag ID):
      lv_guid_str = me->generate_tag_id( ).
      CONCATENATE 'v_' lv_guid_str
             INTO js_unlisted_timepicker_key.              "#EC NOTEXT
*     Building the script retrieving the KEY and saving it into that variable:
      CONCATENATE `var ` js_unlisted_timepicker_key
                   ` = thtmlbConvertTimeToKey("`
                   js_new_selected_value
                   `"); `
             INTO lv_script.
Kind regards,
Sander

Ipad speakers not clear after ios 7 update!

i update my ipad 2 wifi to ios 7 on sep. 18..... and after that update my ipad speakers are not clear at all....pls help.... will rate it for sure........any help will be appreciated!

I do not know if it's iOS7 related or not. My 2 is still working. However, my first 2 was returned to best buy after the charging port on it died. So that can happen. ANd it happens with little to no warning. CHarges monday, doesn't on tuesday.
As far as I know the issues with 'unsigned' lightning devices is just the cable, not the power brick, but there's no official word (nor do I expect one)
Lightning cables have a little chip in them and if that chip isn't signed by Apple then your device kicks up an error but should still work.
However since this is an iPad 2, that's not the case since 2's use 30 pin chargers, not lightning.
Usually when a 2 doesn't charge, common troubleshooting is to swap out the charger, cable and outlet, to confirm or rule those out. Also to do the reset. (the soft reset that's holding down the sleep and home keys until it reboots). Also to look in and blow out the port in case there's some lint or such in there.
Usually those things fixes it. If not, then it could be the port.

Pricing errors are not cleared after fixing the master data

Hi All,
Kindly go through the issue explained below.
Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.
System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine. Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
Scenario : Opportunity is saved with pricing errors.
Analysis : Price or/and Sales area are not maintained in Product that is maintained in Oppt. That is why this error occurs. So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
Actual result: When we create a new opportunity with the same product, pricing is determined. But the errors are not going away from the already created opportunity transactions.
Please let me know if this scenario is not clear to understand.
Please help with your inputs. Thank you for your time.
Regards,
Maddy

Hi Luis,
Thank you very much for your reply. Could you please help me where is the button 'Redermine Pricing' available? I have checked in Opportunity transaction but failed.
Regards,
Maddy

Multi line field Navigation problem with ENTER key

No trigger on the field. Multi line Property is set to true.
The probleb is, when the cursor reaches in the multi line field. the contents of the field are hilighted/selected. So as it happens in Notepad or Word, if you select some already written text and press ENTER key the selected text will be replaced by carriage return so the selected data will be lost. Same is the case with multi line field. When field gets focus it selects the contents of field and when ENTER is pressed all the contents are deleted and a carriage return is placed.
any solution?
null

Hi Nadeem,
One work around is that you have store content of that multi-line field in to some other variable thru PRE-TEXT-ITEM and once again assign (based on some conditon) in POST-TEXT-ITEM.
null

Blue "Change" button does not respond to enter key (OS X)

After entering a new Time in the "Edit Capture Time" screen you select change and the new time is applied. This could be done by selecting the "change" button with the mouse or by hitting the return key or the enter key (since "change" is the blue highlighted button). But in Lightroom 3 and now in Lightroom 4B the enter key doesn't work. Can you please fix this bug. Thanks!

Just to be sure, I updated the program as follows. Click on the mouse to request focus and then hit enter key.
Click on the mouse prints the String "enter key pressed". Then press the Enter key..no action activated.
var button : SwingButton;
Stage {
title: "MyApp"
visible: true
scene: Scene {
width: 100
height: 100
content: [
button = SwingButton {
text: "Button"
action: function() {
println("enter key pressed");
button.requestFocus();
onKeyPressed : function(event : KeyEvent):Void
println("enter key pressed");
}

LM13: Verification field not cleared after [Enter] key

Similar Messages

Maybe you are looking for