LMDB to SMSY sync disabled.

Hi Guys,
We are getting an warning message in LMDB Administration
" NT 601 Consumer Synchronization from LMDB to SMSY ( Cl_LMDBS_Notification) is disabled"
I have checked the job SAP_LMDB_NOTIFY_LDB* there also i find the same message.
I have ran the smsy_setup transaction as well but no luck,
I ran the report Al_LMDB_DISPLAY_SYNC_LOGS but i can not find any logs there as well.
I have checked the note 1670464 but there is no information related to this error message.
Please advice how to proceed.
Regards
Abhishek

Hi,
Found solution in report RLMDB_TRIGGER_DOWNSTREAM_SYNC.
Regards
Abhishek

Similar Messages

SLD is not sync to LMDB nor SMSY

Hi All,
we are running on SOLMAN 7.1 SP03 and CIM & CR Content are upgraded to latest version. Full sync completed sucessfully and incremental sync as well. However, why certain entries (JAVA) in SLD is not sync to LMDB and SMSY? I've deleted it from SLD and trigger from source system but to no avail.
Btw, may i know is LANDSCAPE_FETCH still useful in SOLMAN7.1 or it has been replaced by LMBD_##0001 job?
Your kind advise is very much appreciated,
Thanks,
Nicholas Chang

Hi All,
i would like to thanks for helping. At last i manage to solve part of the problem.
I just dislike LMDB which is really complicate our life.
I can see my java portal, SID EPP in SMSY assigned under technical system -> Java. after full sync from SLD to LMDB.
Therefore, i've to assign EPP to product system -> SAP NW7, but i can't do it in SMSY and need to do it in LMDB and Landscape verification tool, and i can only assign exactly one Product Instance for it, unlike in SMSY, we can select others product instance as relevant.
In order to assign extra product instance, we need to go to Managed System Configuration and click on Edit Technical System Software and add it in section "Maintain Assigned Software".
We need to go numerous places merely to assign one Product System. Perhaps this is the new thing we need to adapt and master it.
At the moment, i still having problem to assign enable XSS software components to my portal where i get an error when try to add it using LMDB -> under software component version. Fyi, i've added ERP Portal content as one of the product instance.
Also, i notice Landscape verification tools is not sync with the changes i make in LMDB, any ideas beside running lvsm_load job?
Thanks all for the help.
Cheers,
Thanks,
Nicholas Chang.

LMDB to SMSY Synchronization ???

Hi ,
We are in SM 7.1 SP 03. I have attached a new remote SLD (SL1) to LMDB and performed full sync. After the sync SL1 data is showing correctly in LMDB.However this data is not being populated in SMSY ! I was hoping after 5 mins. LMDB data will be
synchronized automatically to SMSY. This is not happening. I ran the report AI_LMDBS_DISPLAY_SYNC_LOGS and no sync logs are present.That suggests LMDB > SMSY sync never happened. Am I missing something?
Also tried SMSY_SETUP and ran the LANDSCAPE FETCH job manually but no luck so far
How to sync LMDB with SMSY ?
Your help is much appreciated.
Regards
VIvek
P.S: Already referred https://websmp110.sap-ag.de/~sapidb/011000358700000146522011E.

Hello,
First you state you are on SP03, so you should not be using the Guide for SP01
https://websmp101.sap-ag.de/~sapidb/011000358700001228392011E/Setup_Guide_LMDB_SP2_3.pdf
If you refer to page 14, you can see that SMSY is now going to be automatically updated from the LMDB.
Manual changes should not be made in SMSY, execpt to product system and logical component
The idea is that the datasupplier will feed the data pulled from the system itself to the SLD and the SLD will update LMDB, and LMDB will maintain SMSY.
The habit of making changes in SMSY needs to be broken in 7.1
I am not sure what all you might have done up to this point, but you may want to consider removing the systems that are not updating from LMDB and SMSY, then resync from SLD using report RLMDB_SYNC_TECHNICAL_SYSTEM, see page 22 of same guide above.
Also consider:
If multiple SLDs are connected to LMDB, one technical system must be registered on only one SLD, otherwise inconsistencies may arise in LMDB.
Hope this information helps
Paul

Synchronization error between LMDB and SMSY

Hello Experts
I have a sync error between LMDB and SMSY entries. I want your help to make this synchronization to Solution Manager 7.1 SP07.
Thank you very much for your help
Juan Carlos Salazar R

Solman Setup - Configuration Lost
To try to solve the synchronization error
I have been running a Report for get some information and as a consequence all the information into the solman configuration was lost. I mean everything, all the clock (the date of modification) are in zero, and all the status are grey.
Someone know How to bring this information back; without performing a backup or to perform a setup again.
The report is the RLMDB_SYNC_TECHNICAL_SYSTEM

Sync menu turned gray after re-install (Sync Disabled)

I have Leopard (10.5.8) and I had to re-install because my wife deleted Safari! I had previously setup syncing my google contacts with Address Book on my mac. The process of syncing contacts previously required a manual sync (click on the menu bar -> Sync Now). Sync now is grayed out after re-install, and it shows 'Sync Disabled'.
I followed the instruction below:
http://support.apple.com/kb/TS1627
It didn't help. I don't recall having a Mobile Me (may be I've had it, may be not) but never used it. Now, do I need to be signed into a mobile me account to have this feature enabled, or this has nothing to do with Mobile Me account?
Thanks

Sync isn't meant to be used as a backup device, but merely to sync data between multiple devices.
So it is not guaranteed that you can restore data from the Sync server.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information

Syncing disabled with Itunes 10.1

I can't my sync address book and ical Itunes with my iphone 3GS (OS 4.1) with itunes 10.1. Itunes keeps telling me syncing is disabled on this computer (imac) and I can't change it.
I check sync address book contacts , hit apply and the window syncing has been disabled comes up and check it to enable it and a new window comes up to overide. . I then hit overide and still no syncing, this is very frustrating , Anyone have any ideas how to proceed ? Should I reinstall itunes ? This has been happening since upgrading to itunes 10. Can I go back to itunes 9.
Craig

Sounds like you have an issue with your Sync Server.
To fix this it will require some pretty advance troubleshooting.
Before you begin, male sure any and all data is backed up from
iCal an addressbook.
1. Make sure you are NOT logged into mobile me. You can check this by going to your system preferences and selecting mobile me. Sign out if you are logged in.
2. Unplug ANY AND ALL iOS devices (iPod iPhone etc) and restart your computer into safe boot.
3. To make sure you don't have ANY active sync clients, boot your Mac into safe boot by holding the shift key.
4. Navigate to the following location ~/library/application support/ and RENAME the SyncServices folder to something random.
5. Restart your computer regularly and try to open iSync.
Let us know the results!

Office 365 directory sync disable stuck on pending

I have a situation where I have setup directory sync with the on premise AD and Office 365. I have now tried to disable directory sync and is has been a week and it still says:
Active Directory synchronization is being deactivated. This process may take up to 72 hours to complete.
in the admin site. I also get this from the PowerShell:
PS C:\Windows\system32> (Get-MSOLCompanyInformation).DirectorySynchronizationStatus
PendingDisabled
I really need some help getting this disabled properly so I can start fresh with directory sync.

Hi,
If the output is "PendingEnabled" or "PendingDisabled" after the expected enablement time period has passed, this is a known issue with Exchange Online.
Please refer to this KB article for more details:
http://support.microsoft.com/kb/2654338. You might need to follow the steps listed in above article, collect the information, and then contact Support.
Also,this forum focuses on some general discussion about Microsoft Office, better to post this kind of questions in the forum of Office 365 Community where you can get more effective answers:
https://community.office365.com/en-us/f/default.aspx
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

Firefox sync disables itself

I have a firefox sync account, however every time I go to the Tools --> Options --> Sync tab nothing is there but the "Set Up Firefox Sync" option. I have reset this multiple times on multiple PCs (and received the "Device Connected" message with the same ultimate result each time (i.e. it disables itself). Any helpful suggestions?

You said; ''''' I downloaded it a long time ago'''''
You did not say you kept it updated. And no, I don't know what
is wrong. So I, and any others, have to ask questions and give
advice on fixing the issue.
If one of us were sitting there with you, the problem might be fixed
in minutes. Unfortunately, that is not possible. And this forum was invented.
And I never said or implied that anyone was illiterate.
Hailing Frequencies Closed.

365 Directory Sync Disable

I have synced my AD to 365 successfully for around a year,
I need to decommission AD sync but was wondering if all of the usernames and passwords will be kept on 365 after the sync is disabled?
I sync sam account names which are in format [email protected] but email addresses for the domain are [email protected]
Users authenticate to 365 with their domain.local addresses.
I am just checking before I stop the sync and people are unable to log in, Thanks
***Don't forget to mark helpful or answer***

Yes, people would still be able to log on and work.
Just new users would not be propagated and (if you have it synchronized) passwords would not be propagated.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

DIP Sync - disable account in OID

I have the basic sync profile setup where it syncs all the attributes from AD to OID. Is there a way to sync so that when a user is disabled in AD, it will also disable a user in OID?
I would like to set the attr orclisenabled to disabled when a user gets disabled in AD.
As far as I know, DIP sync doesnt support this OTB. What are the options? Create an OID plugin? Or create a custom mapping plugin?
Edited by: DJ on Oct 23, 2012 2:01 PM

Hi,
You can create a OID plugin that can be achieved your aim.
here is the link to create OID plugin : http://docs.oracle.com/cd/E28271_01/oid.1111/e10029/svrplgin.htm
thanks,

MobileMe syncing disabled on my iMac

I have an iMac running OS10.5.8, an iPhone 3GS running OS4.0.2. I also have Outlook at work on a PC. Using MobileMe, I used to be able to sync my calendars & contacts between Outlook, my iPhone and iCal. Although the calendars sync between Outlook and my iPhone, so I know MobileMe works, the MobileMe sync is disabled on my iMac! When I plug my phone into iTunes I get a message saying that "syncing is disabled on this computer". It allows me to override for syncing podcasts, etc., but not for regular ongoing MobileMe syncing of calendars. In System Preferences->MobileMe-->Sync is grayed out.

Has your mobile me account expired and have not been auto renewed?

IPhone Sync Disabled with iTunes - COMMON PROBLEM

I've read this issue everywhere with iPhone users. When trying to sync with your iTunes, it displays the message "iTunes cannot sync information with the iPhone "-" because syncing has been disabled on this computer. Do you want to enable syncing?"
Obviously, you click yes. Then it displays "Syncing cannot be enabled on this computer", to which you can accept this fact (OK), or (Override). Either option allows the iPhone to do a basic sync (music, apps, photos, videos), but leaves all your contacts, calendar dates, and Mail accounts on your computer.
In conjunction with this, iSync doesn't seem to be working either, so it leads me to believe there is an error in the sync directory, or whatever.
I've already tried completely removing iTunes and reinstalling it, so i know that doesn't work, as well as reinstalling the iPhone OS, and restarting both.
I have a Macbook Pro, running Snow Leopard 10.6.5, running iTunes 10.1.1, with and iPhone 4 running 4.2.1, so everything up to date.
Please can we try and get as many answers as possible on this thread, so people don't have to search around picking ideas form everywhere.
Please help!!

I've read this issue everywhere with iPhone users.
Not here. The same is not reported here very often.
Try repairing disk permissions on your boot drive.
http://www.thexlab.com/faqs/durepairfns.html#Anchor-The-11481

Auto Sync disables album art?

I have had my nano on manual for a while, but today i decided to switch to auto syncing, however, when i view the songs there isnt any album art, and with manual transferring there was. Problem with the software?

If your iPod is set to manual transfer, you can add artwork directly to the songs on the iPod (through iTunes).
Connect the iPod and click on it so all the songs are visible in iTunes and highlight any song or album. Then get an artwork image from (say) Amazon and copy/paste it into the artwork box in iTunes which will add it to the song/album on your iPod.
You cannot use the "get album artwork" feature in iTunes to add artwork this way and one thing to note is that if you add artwork directly to the iPod, the artwork is sometimes not displayed or displayed incorrectly when playing songs (because this is not the intended method of adding artwork).

ITunes sync disables EAS sync

I have user that just updated iTunes to the latest version. Now whenever he syncs with his laptop, his EAS will stop syncing. He can go back in and setup the account again and it will work until he syncs. Then it stops.

I did a Restore iPhone, then Restore from backup. No change. Calendar entries in iPhone do not sync to computer; new entries in iCal get repeated on iPhone for each edit during creation, e.g., change of calendar shows one for each calendar; change date shows another for the old date. Deleting in iCal does not delete on iPhone, but gets put back on iPhone; changing in iCal creates a new event on iPhone in addition to old one.Changed end time on iPhone and was shown a conflict resolution, rather than changing the event in iCal.

Downloads fail - File & Font sync disabled OSX Mavericks

this is more of a bug report than a question but im leaving it here for whoever can fix the problem.
I am running OSX 10.9 (mavericks) and everytime i open the Creative cloud desktop application, it says at the bottom "File and Font syncing is Off - Resume sync"
but when i resume, it takes a few seconds generally and then stops syncing and returns with that message again (also there is a pause icon on the cc menu bar icon)
and i now have an update for Flash professional CC, but whenever i try to update, it prompts me for my password, then after i type it in, after a few seconds it says "The update failed, the file appears to be corrupted, try again in a few minutes"
but it never works...
anyway! no other issues just wondering if there is a fix?
- Connor

Toggle_Norvell did you search the installation log for the word error? Which Flash Professional CC update exactly are you trying to apply? As a general suggestion you could remove your current installation, reinstall, and try applying the update again. Without knowing the exact error though you are facing it is difficult to determine if this will resolve your current difficulties or not. You may also want to review Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html which discusses a common error received while applying updates.
For File sync difficulties you will need to work directly with our support team.

LMDB to SMSY sync disabled.

Similar Messages

Maybe you are looking for