LMS 2.6, cannot start process syslogAnalyzer

I'm unable to generate any syslog reports. an error is received when I see the collectot status
> Error
Collector Status is currently not available
Check Whether SyslogAnalyzer process is running normally
The following is the Analyzer status
Process= SyslogAnalyzer
State = Administrator has shut down this server
The syslog.log file receives the logs. The syslogCollector log indicates the following error,
Could not send syslogs, removing the subscriber...Connection refused: connect
NMSROOT is C:/PROGRA~1/CSCOpx propFileC:/PROGRA~1/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~1\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
SyslogCollector - [Thread: main] INFO , 22 Dec 2009 15:20:00,046, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 22 Dec 2009 15:20:00,046, System Initialized.
SyslogCollector - [Thread: main] WARN , 22 Dec 2009 15:20:08,640, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] INFO , 22 Dec 2009 15:20:08,718, Service started...
Resubscring the Analyzer to the collector doesn't solve the issue.
When enabling the analyzer process manually, it throws an error
"Error: cmd failed. Server reason:"
can anybody help in fixing this?
Thanks in advance

Hi Joe, i've attached the files. But netstat command seems not to be taking
C:\>netstat -a -n -b -o
Displays protocol statistics and current TCP/IP network connections.
NETSTAT [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]
Also, nothing was written to the AnalyzerDebug.log file.

Similar Messages

Workspace cannot start process, puts it in the Draft folder

Hi!
My processes which i have used many times in workspace now cannot be started. Workspace puts them in the draft folder and doesn't do more. Please help!
Kind regards
Sedat,

Have you changed your form?
It looks like it can submit the form.
Are you using the process fields from Form Designer, or you're own submit button.
Jasmin

Cannot start Process in sap mmc

Hello Sap Gurus,
In RZ10 I have coped default profile into zdefault made some changes in it and have activated it. After this when i tried to start my processes, they are not starting.
I went to SAP-> ecc->Profiles and again reverted my changes in default profile. Even then my processes are not starting.
Please tell me how to resolve this. I am new to this field. So please elaborate the solution so that it can be easily understood by lay men like me.
I am getting the below in process list:
In process list : msg_server.exe : stopped
disp+work.exe : stopped
igswd.exe : stopped
Thanks,
SriNitya,

Hi,
As subhash said you should revert the profile, if you have a backup just replace the file in <drive>/usr/sap/SYS/profile.
if not then you should be able to open the File using wordpad / notepad there you can see the Changes done last time as it will be written in file as commented line.
Just undo the changes by using # which will comment the parameter.
Further what was the change that you did in default profile?? still not working please paste Dev_ms log file.
Thanks,
Balaji.S

Cannot start BPM process, "Start process" button is disabled: Why?

Dear all,
I am working on the BPM example "Modeling Your First Process with SAP NetWeaver Business Process Management" with the "Purchase process". I did everything as mentioned in the tutorial.
At the end, I would like to start the process using
NWA > Configuration management > Processes and Tasks > Process Repository
I can see my WD example that I have deployed and I see the my task definitions and my process definition. In the tutorial it says, that I can select the process definition and click "Start process". But the button "Start process" is always disabled. I cannot click the button. I don't know why. Did I miss something?
I am logged in as Administrator. I am using NW AS 7.2 and I am developing with NWDS 7.1 SP04.
Anyone has an idea what can I do to start the process?
Thanks in advance
Edited by: Patrick Beck on Jun 25, 2010 4:55 PM

Thanks for the link.
I added the new context attribute in the XSD files (under Process Modeling > Data Types > XSD Files).
Since I added a new context attribute "Comment" of type String in my Web Dynpro, I added the following on the corrent position of the XSD files:
 <xsd:element name="Comment" type="com.sap.dictionary.string">
 <xsd:annotation>
 <xsd:appinfo>
 <xsd:attribute name="ReadOnly" type="xsd:boolean" fixed="false"/>
 </xsd:appinfo>
 </xsd:annotation>
 </xsd:element>
I also edited input and output mapping of the human and automated activities to support the new attribute "Comment". I thought this is enough to pass the new "Comment" parameter from activity to activity.
But when I started the process, I filled in the comment field in Web Dynpro and went to the next step in the process. Seems like the new attribute value for "Comment" got lost. It does not appear in the next process step.
Did I miss something?
These are the steps I did:
- edit Web Dynpro UI to support the new context attribute "Comment". created new input field and mapped to the Comment context attribute (that is defined in my WDP interface).
- edited XSD files (one for each human activity) to support the new Comment attribute as mentioned above.
- edited the mapping between the activities to support pass-through of the new Comment attribute between the activities
But it seems like it's not saved in the context attribute "Comment". It got lost after the first step.
Any ideas?

Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
Dimitri

Hi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Cannot start background process DTPR_13362_

Hi ,
Whenever DTP is executed in the Dev Server,it throws an error.
Error msg: Cannot start background process DTPR_13362_1 26.09.2011 14:17:44 1 Min. 50 Sec.
while checking the message in the monitor screen the cursor is at this function.
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
Please let me know what needs to be done here so that DTP processed sucessfully.
This is urgently required..thanks..
Regards,
Kalim.

Hi
Check how many parallel processes are defined for this DTP.
display the DTP in RSA --> in menu bar click on "goto" --> "settings for batch manager"
In the next screen you will get the number of processes assigned to this DTP.
When you are running this DTP, check these many background processes are available in your system.
If you want you can decrease this number9by default it will be 3)
Regards,
Venkatesh

Cannot start EPMA Process Manager.

I cannot start EPMA Process Manager on Windows. Here is the error from the Event Log:
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database connectivity could not be established. ---> Oracle.DataAccess.Client.OracleException ORA-1017: invalid username/password; logon denied at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection()
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection(Int32 maxRetries, Int64 timeout)
--- End of inner exception stack trace ---
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection(Int32 maxRetries, Int64 timeout)
at Hype...
I have reconfigured, retyping the correct user and password many times now. I can log into the database from the server using SQL Plus with no issues. If anyone has an idea of what could be wrong, I would really appreciate the help.
Thanks!

I had the DBA create me a new empty database user. I ran the config tool again using this user/pwd and selected first time configuration of database. This finished successfully, 213 objects were created in the database. When I try to start the dimension server, I am still getting the ORA-1017 error.

Cannot start OC4J process using opmnctl

opmn startall hangs and times out with error on OC4J_SECURITY
Posted: Oct 3, 2008 9:46 AM Reply
FYI.
A few days ago our system drive, on our Development system, crashed and we had to rebuild it.
All of our Oracle Installations remained intact,
But
I've had to: modify kernel parameters, install packages, etc., similar to pre-install procedures.
After re-creating some of the oracle specific files in the /etc and /usr/local/bin directories
I've been able to get our databases up and running.
But
I cannot start all of the necessary processes for our Application Server.
It hangs for several minutes then returns this error message:
ias-component/process-type/process-set:
OC4J/OC4J_SECURITY/default_island
Error
--> Process (pid=6304)
time out while waiting for a managed process to start
Log:
/oracle6/app/oracle/product/10.1.2as/opmn/logs/OC4J~OC4J_SECURITY~default_island~1
There is no helpful information in the, above mentioned, log file.
opmnctl status displays this information:
ias-component | process-type | pid | status
======================================
OC4J | OC4J_SECURITY | 0 | NONE
??? My thoughts are:
1. I've neglected to re-create a necessary Oracle specific file on the system drive, or
2. This is a port access issue due to firewalls or something of that nature.
Can you please help me here?
Thanks- Gary

Thank you for the info.
Also
I forgot to add one additional thought:
Could it be a linking issue, to some of the library files??
I don't know why this thought has crossed my mind,
but I know in times passed, (probably from years ago), I have had to do a relink of some sort to resolve
whatever issue it happened to be at the time.
I'd appreciate you thoughts on the 'relink' idea.
In the meantime, I will double check myself on having satisfied all of the necessary install requirements.
Thanks again- Gary

Windows cannot start the installation process

I have windows server 2012 datacenter with hyper-v role that I tried to upgrade to R2 RTM.
All went fine until the reboot and the error "windows cannot start the installation process"
I can start windows server 2012
I must say that I used a ISO file using DRAC for the install.
Is there a log to check for errors?

Hi,
Just a thought, check to see what your BIOS settings are on your computer.
This problem is usually related some potential problem in the disk or BIOS or faulty hardware. The BIOS sometimes limits the read/write scope of boot sectors, to avoid virus attack.
Review the BIOS setting, if there’s any Anti-Virus settings, just disable it, and then start the install again.
Regards,
Yan Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Urgent: cannot start the shadow instance at phase STARTSAP_TRANS

We are upgrading to NW2004s (ABAP only) from 640.
How to re-start the shadow instance?
At this point, anyway we cannot start the shadow instance.
At SAPMMC, the disp+work
1) first show "running but the dialog queue standstill"
2) then show" running but not connected to the message server"
3) then the disp+work dies.
Above happens in 1 minute after re-start.
The dev_ms reads:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4740] Mon Apr 02 15:07:53 2007
[Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2932
[Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c 1824]
[Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
[Thr 4740] MsGetOwnIpAddr: my host addresses are :
[Thr 4740] 1 : [10.10.10.68] houston (HOSTNAME)
[Thr 4740] 2 : [127.0.0.1] houston.monet.local (LOCALHOST)
[Thr 4740] Mon Apr 02 15:07:54 2007
[Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
[Thr 4740] HTTP logging is switch off
[Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
[Thr 4740] ms/icf_info_server : deleted
[Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
[Thr 4740] CUSTOMER KEY: >B0790292062<
[Thr 4740] Mon Apr 02 15:08:54 2007
[Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from houston_XYZ_60 [msxxserv.c 4679]
[Thr 4740] Mon Apr 02 15:19:35 2007
[Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c 3165]
[Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c 3169]
The dev_disp reads:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 60
sid XYZ
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4036
Mon Apr 02 15:07:53 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c 1239]
 shared lib "dw_xml.dll" version 95 successfully loaded
 shared lib "dw_xtc.dll" version 95 successfully loaded
 shared lib "dw_stl.dll" version 95 successfully loaded
 shared lib "dw_gui.dll" version 95 successfully loaded
 shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 02 15:07:58 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >houston_XYZ_60 <
DpShMCreate: sizeof(wp_adm) 19888 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05BF0040, size: 4240712)
DpShMCreate: allocated sys_adm at 05BF0040
DpShMCreate: allocated wp_adm at 05BF1A28
DpShMCreate: allocated tm_adm_list at 05BF67D8
DpShMCreate: allocated tm_adm at 05BF6808
DpShMCreate: allocated wp_ca_adm at 05F66A98
DpShMCreate: allocated appc_ca_adm at 05F6B0E8
DpShMCreate: allocated comm_adm at 05F6C858
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05FED708
DpShMCreate: allocated gw_adm at 05FED748
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05FED778
DpShMCreate: allocated wall_adm at 05FED780
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12314]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >houston_XYZ_60 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Mon Apr 02 15:08:38 2007
ERROR => W0 (pid 1084) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4200) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3316) died [dpxxdisp.c 14318]
ERROR => W3 (pid 5276) died [dpxxdisp.c 14318]
ERROR => W4 (pid 5348) died [dpxxdisp.c 14318]
ERROR => W5 (pid 3436) died [dpxxdisp.c 14318]
ERROR => W6 (pid 3920) died [dpxxdisp.c 14318]
ERROR => W7 (pid 4868) died [dpxxdisp.c 14318]
ERROR => W8 (pid 5380) died [dpxxdisp.c 14318]
ERROR => W9 (pid 4584) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W10 (pid 4188) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W11 (pid 2700) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W12 (pid 4604) died [dpxxdisp.c 14318]
ERROR => W13 (pid 4916) died [dpxxdisp.c 14318]
ERROR => W14 (pid 4440) died [dpxxdisp.c 14318]
ERROR => W15 (pid 4544) died [dpxxdisp.c 14318]
ERROR => W16 (pid 1888) died [dpxxdisp.c 14318]
ERROR => W17 (pid 548) died [dpxxdisp.c 14318]
ERROR => W18 (pid 2800) died [dpxxdisp.c 14318]
ERROR => W19 (pid 2080) died [dpxxdisp.c 14318]
ERROR => W20 (pid 2888) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W21 (pid 5572) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:48 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 02 20:08:48 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1084 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 3316 Ended no 1 0 0
3 DIA 5276 Ended no 1 0 0
4 DIA 5348 Ended no 1 0 0
5 DIA 3436 Ended no 1 0 0
6 DIA 3920 Ended no 1 0 0
7 DIA 4868 Ended no 1 0 0
8 DIA 5380 Ended no 1 0 0
9 DIA 4584 Ended no 1 0 0
10 UPD 4188 Ended no 1 0 0
11 ENQ 2700 Ended no 1 0 0
12 BTC 4604 Ended no 1 0 0
13 BTC 4916 Ended no 1 0 0
14 BTC 4440 Ended no 1 0 0
15 BTC 4544 Ended no 1 0 0
16 BTC 1888 Ended no 1 0 0
17 BTC 548 Ended no 1 0 0
18 BTC 2800 Ended no 1 0 0
19 BTC 2080 Ended no 1 0 0
20 BTC 2888 Ended no 1 0 0
21 SPO 5572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 02 20:08:48 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Apr 02 20:08:48 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 02 20:08:48 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:53 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >houston_XYZ_60 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2072) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2072 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2072 HANDLE:1580)
DpStartStopMsg: send stop message (myname is >houston_XYZ_60 <)
NiIMyHostName: hostname = 'houston'
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Apr 02 15:08:55 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1488 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1488 (pos=2)
SiSelNRemove: removed sock 1488
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1488
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c 10333]
Good Bye .....
The dev_w21 reads:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 02 15:08:01 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
B New connection 0 created
M sysno 60
M sid XYZ
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 5572
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c 1301]
I
I Mon Apr 02 15:08:02 2007
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 19888 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 063F0040, size: 4240712)
M DpShMCreate: allocated sys_adm at 063F0040
M DpShMCreate: allocated wp_adm at 063F1A28
M DpShMCreate: allocated tm_adm_list at 063F67D8
M DpShMCreate: allocated tm_adm at 063F6808
M DpShMCreate: allocated wp_ca_adm at 06766A98
M DpShMCreate: allocated appc_ca_adm at 0676B0E8
M DpShMCreate: allocated comm_adm at 0676C858
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 067ED708
M DpShMCreate: allocated gw_adm at 067ED748
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 067ED778
M DpShMCreate: allocated wall_adm at 067ED780
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host houston
M
M Mon Apr 02 15:08:03 2007
M calling db_connect ...
C Thread ID:4020
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 87
C patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
C np:(local) connection used on houston
C CopyLocalParameters: dbuser is 'XYZ_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Can't use MARS (on sql 8.0). Reconnecting without MARS functionality.
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
C Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
C pn_id:houston_XYZXYZ_XYZ_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070402 150803 houston
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 21
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_SPOWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server houston_XYZ_60 on host houston (wp 21)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Apr 02 15:08:03 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c 327]
On SDN there are many discussions about similar errors but none
of them fits our situation.
Please give your advice. Points will be given.
Thanks!

Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:20:45 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since Mar 22, 2007 1:20:49 PM
> MOUNT POINT 12 = D:\D12\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 23 = D:\D23\51032247
> MOUNT POINT 18 = D:\D18\NW_2004s_SR2_liveCache_7.6.00_Bd._29
> MOUNT POINT 15 = D:\D15\NW_2004s_SR2_Upgrade_Master
> MOUNT POINT 09 = D:\D9
> MOUNT POINT 14 = D:\D14\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 01 = D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 08 = D:\D8\SAP_CRM_5.0_SR2_Languages
> MOUNT POINT 20 = D:\D20\NW_2004s_SR2_Languages
> MOUNT POINT 03 = C:\D3\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 06 = C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86
> MOUNT POINT 10 = D:\D10
> MOUNT POINT 17 = D:\D17\51032257
> MOUNT POINT 21 = D:\D21\NW_2004s_SR2_Languages
> MOUNT POINT 19 = D:\D19\51032257
> MOUNT POINT 05 = C:\D5\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 04 = C:\D4\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 11 = D:\D11\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 07 = D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master
> MOUNT POINT 24 = D:\D24
> MOUNT POINT 02 = C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 22 = D:\D22\NW_2004s_SR2_Languages
> MOUNT POINT 16 = D:\D16\BS_2005_SR2_SAP_Installation_Master
> MOUNT POINT 13 = D:\D13\SAP_CRM_5.0_SR2_Installation_Export
Reading data from "Upgrade Master CD/DVD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:24:47 PM
> cancel
Connection to SAPup was closed
Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:28:34 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
Reading data from "Upgrade Master CD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:43 PM
> continue
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
 500 of BBPCRM
 2005_1_700 of PI_BASIS
 700 of SAP_ABA
 700 of SAP_AP
 700 of SAP_BASIS
 700 of SAP_BW
 2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:50 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:28:54 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input initial yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:28:56 PM
> Parameter input initial yes
You selected the following PREPARE modules:
Parameter input
execute: Execute the selected PREPARE modules.
 Make sure that you have carried out the actions described in
 D:\usr\sap\put\log\CHECKS.LOG before continuing.
 (Note: The contents of file CHECKS.LOG are saved
 in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
Waiting for input since Mar 22, 2007 1:28:59 PM
> execute
Execution of PREPARE module Parameter input begins at 20070322142901
>> 14:29:01 PREPARE: START OF PHASE BEGIN_PRE
Generating html phase list files 'phase_toc.html' and 'phaselist.html'
>> 14:29:01 PREPARE: END OF PHASE BEGIN_PRE
>> 14:29:01 PREPARE: START OF PHASE KEY_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
Enter the SAPup keyword of note 961511
? SAPup keyword =
Waiting for input since Mar 22, 2007 1:29:02 PM
> SAPup keyword = 19327784
>> 14:37:23 PREPARE: END OF PHASE KEY_CHK
>> 14:37:23 PREPARE: START OF PHASE EXTRACTKRN_PRE
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exe.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exe" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exenew" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exenew.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exenew" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exenew" ...
Done.
>> 14:40:10 PREPARE: END OF PHASE EXTRACTKRN_PRE
>> 14:40:10 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system:
? SAP SYSTEM ID =
The hostname of your central SAP server:
? SAP SYSTEM HOST =
Enter the SAP instance number:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:40:10 PM
> INSTANCE NUMBER = 59
> SAP SYSTEM HOST = damascus
> SAP SYSTEM ID = ADC
The system identifier of your database:
? DATABASE ID =
The hostname of your database server:
? DATABASE HOST =
Waiting for input since Mar 22, 2007 1:43:59 PM
> DATABASE HOST = damascus
> DATABASE ID = ADC
Executing script MSSCONCHECK ...
Supply the following information:
The password for SAP user DDIC in client 000
(may be 19920706):
? DDIC PASSWORD =
Verify password for SAP user DDIC:
? DDIC PASSWORD =
Waiting for input since Mar 22, 2007 1:44:03 PM
> DDIC PASSWORD = <hidden input>
> DDIC PASSWORD = <hidden input>
The hostname of your batch server:
? BATCH HOST =
Waiting for input since Mar 22, 2007 1:44:14 PM
> BATCH HOST = damascus
Supply the following information:
The maximum number of parallel processes during uptime:
? MAXIMUM UPTIME PROCESSES =
The number of parallel import processes:
? R3TRANS PROCESSES =
The maximum profile value of "bufreftime":
? MAXIMUM SYNC TIME =
Waiting for input since Mar 22, 2007 1:44:16 PM
> R3TRANS PROCESSES = 3
> MAXIMUM SYNC TIME = 120
> MAXIMUM UPTIME PROCESSES = 1
The password for Operating System account .\SAPServiceADC:
? PASSWORD =
Verification of the password for Operating System account .\SAPServiceADC:
? PASSWORD =
Waiting for input since Mar 22, 2007 1:44:19 PM
> PASSWORD = <hidden input>
> PASSWORD = <hidden input>
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Executing script MSSUPGSPS ...
Executing script MSSINCHK ...
>> 14:44:43 PREPARE: END OF PHASE INITPUT_PRE
>> 14:44:43 PREPARE: START OF PHASE DBCHK_PRE
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Is there more than one system running in this database?
(MCOD: Multiple components in one database)
? no
? yes
Waiting for input since Mar 22, 2007 1:44:45 PM
> no
>> 14:44:49 PREPARE: END OF PHASE DBCHK_PRE
>> 14:44:49 PREPARE: START OF PHASE CONFCHK_IMP
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:44:50 PREPARE: END OF PHASE CONFCHK_IMP
>> 14:44:50 PREPARE: START OF PHASE SOLMAN_CHK
The SAP Solution Manager Key is required for the upgrade.
Further informations can be found in the upgrade guide,
the SAP Service Marketplace and SAP note 805390!
? continue
? cancel
Waiting for input since Mar 22, 2007 1:44:50 PM
> continue
? SAP Solution Manager Key =
Waiting for input since Mar 22, 2007 1:44:53 PM
> SAP Solution Manager Key = 12D8B10981
>> 14:45:14 PREPARE: END OF PHASE SOLMAN_CHK
>> 14:45:14 PREPARE: START OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: END OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: START OF PHASE HIAV_CHK
>> 14:45:14 PREPARE: END OF PHASE HIAV_CHK
>> 14:45:15 PREPARE: START OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: END OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: START OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: END OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: START OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: END OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: START OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: END OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: START OF PHASE INIT_CBU
>> 14:45:15 PREPARE: END OF PHASE INIT_CBU
>> 14:45:15 PREPARE: START OF PHASE CHECKGROUP_END0
Execution of PREPARE module Parameter input ends at 20070322144515
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Parameter input' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:45:15 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:45:23 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:45:26 PM
> Initialization initial yes
You selected the following PREPARE modules:
Initialization
execute: Execute the selected PREPARE modules.
 Make sure that you have carried out the actions described in
 D:\usr\sap\put\log\CHECKS.LOG before continuing.
 (Note: The contents of file CHECKS.LOG are saved
 in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:45:30 PM
> execute
Execution of PREPARE module Initialization begins at 20070322144532
>> 14:45:32 PREPARE: START OF PHASE INITCURENV
>> 14:45:32 PREPARE: END OF PHASE INITCURENV
>> 14:45:32 PREPARE: START OF PHASE DBCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:45:34 PREPARE: END OF PHASE DBCHK_INI
>> 14:45:34 PREPARE: START OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: END OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: END OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: END OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: START OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: END OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: START OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: END OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: START OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: END OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: START OF PHASE DBCONNCHK_INI
Checking DB connect with 'D:\usr\sap\put\exe\R3trans.exe'.
>> 14:46:00 PREPARE: END OF PHASE DBCONNCHK_INI
>> 14:46:00 PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: END OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: START OF PHASE UCMIG_DECISION
Your system is configured as a non-Unicode SCP (Single Code Page) configuration.
If you plan to perform a Unicode Conversion after the upgrade, you may choose to perform a combined
Upgrade and Unicode Conversion.
In this case, several of the migration preparation steps can be done already on the start release
or on the upgrade shadow system.
For further information, please refer to OSS note 928729.
Do you want to perform a combined Upgrade and Unicode Conversion?
? Yes
? No
Waiting for input since Mar 22, 2007 1:46:06 PM
> No
>> 14:48:04 PREPARE: END OF PHASE UCMIG_DECISION
>> 14:48:04 PREPARE: START OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: END OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: START OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: END OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: START OF PHASE INTCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxttent ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxtfent ADC
>> 14:48:15 PREPARE: END OF PHASE INTCHK_INI
>> 14:48:15 PREPARE: START OF PHASE ADJ_CNTRANS
Calling R3trans to import 'RSUPDTEC.60X'.
Waiting 130 seconds for buffer synchronization ...
working ...
>> 14:50:38 PREPARE: END OF PHASE ADJ_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: END OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: END OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: START OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: END OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: START OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: END OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: START OF PHASE CHK_DB6_REG_PRE
>> 14:50:38 PREPARE: END OF PHASE CHK_DB6_REG_PRE
>> 14:50:39 PREPARE: START OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: END OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: START OF PHASE SPACECHK_INI
Executing script MSSSPACE ...
>> 14:50:39 PREPARE: END OF PHASE SPACECHK_INI
>> 14:50:39 PREPARE: START OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: END OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: START OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: END OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: START OF PHASE EXECCV
>> 14:50:44 PREPARE: END OF PHASE EXECCV
>> 14:50:44 PREPARE: START OF PHASE EXECAV
>> 14:50:50 PREPARE: END OF PHASE EXECAV
>> 14:50:50 PREPARE: START OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: END OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: START OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: END OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: START OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: END OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: START OF PHASE ADDON_SPEC1
>> 14:50:55 PREPARE: END OF PHASE ADDON_SPEC1
>> 14:50:56 PREPARE: START OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: END OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: START OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: END OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: START OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: END OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: START OF PHASE ACE_CHK
>> 14:51:01 PREPARE: END OF PHASE ACE_CHK
>> 14:51:02 PREPARE: START OF PHASE CRM_BILL
>> 14:51:02 PREPARE: END OF PHASE CRM_BILL
>> 14:51:02 PREPARE: START OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: END OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: START OF PHASE CHECKGROUP_END1
Execution of PREPARE module Initialization ends at 20070322145102
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Initialization' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:51:02 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:51:41 PM
> continue
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:51:41 PM
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
 500 of BBPCRM
 2005_1_700 of PI_BASIS
 700 of SAP_ABA
 700 of SAP_AP
 700 of SAP_BASIS
 700 of SAP_BW
 2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:58:46 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:58:53 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:58:56 PM
> Import initial yes
You selected the following PREPARE modules:
Import
execute: Execute the selected PREPARE modules.
 Make sure that you have carried out the actions described in
 D:\usr\sap\put\log\CHECKS.LOG before continuing.
 (Note: The contents of file CHECKS.LOG are saved
 in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:59:00 PM
> execute
Execution of PREPARE module Import begins at 20070322145902
>> 14:59:02 PREPARE: START OF PHASE REQIMPORT
 The PREPARE module Import will be started now.
During this module programs, structures, and table entries
required by PREPARE are imported (the socalled "tool import").
Note: This can cause a loss of performance in R/3
In rare cases, a concurrent transport via the transport directory
may disturb the tool import. Please avoid any concurrent import
during this PREPARE module.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:59:02 PM
> continue
>> 14:59:05 PREPARE: END OF PHASE REQIMPORT
>> 14:59:05 PREPARE: START OF PHASE READDATA
Trying to find archive files ...
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to D:\usr\sap\put.
Trying to find archive files ...
Extracting archive "C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR" to "D:\usr\sap\put" ...
Archive C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR successfully unpacked to D:\usr\sap\put.
>> 14:59:40 PREPARE: END OF PHASE READDATA
>> 14:59:40 PREPARE: START OF PHASE READDATA_EXT
Trying to find archive files ...
>> 14:59:41 PREPARE: END OF PHASE READDATA_EXT
>> 14:59:41 PREPARE: START OF PHASE TOOLFIX_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
>> 14:59:42 PREPARE: END OF PHASE TOOLFIX_CHK
>> 14:59:42 PREPARE: START OF PHASE CPYFIL0_CBU
>> 14:59:42 PREPARE: END OF P

Cannot start Photoshop CC 64 bit after update

The PS CC 64 bit used to work, I tried to update the app using Creative Cloud, and it cannot start again.
I have tried to uninstall and re-install it again and agin for several times, it still doesn't work.
The above is the latest error message, it seems to be a bit different (error with different files) each time I reinstall the software.

Hello,
sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!) http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations. Sometimes the "opm.db file" is the culprit. In this case you should delete it.
So far, so good –I also often gave this advice. This approach only allows to look at the symptoms of this malfunction. Therefore I started a thread “What's up with "Downloading, Installing, Setting Up"?” I asked for a improvement of the product, so it is not necessary to use Cleaner Tool. Preran a member of Adobe’s staff promised "many improvements". Here is the link: https://forums.adobe.com/message/6408998
In order to accelerate the process I therefore call upon you to support my efforts. Most successful could be to click a „like“ in Prerans answer (see consecutive number 11)
Thanks,
Hans-Günter

HT3743 Iphone 4 unlocked by at&t i did a restore from itunes and get an error message "your request cannot be processed please try again after sometime" I tried for a week now but same problem, please advice

I have Iphone4 brought from at&t USA(carrier locked) and i am in india now, i contacted at&t and requested for an unlock for me to use with indian carriers.
I got an email confirming the unlock has been completed from at&t and asked me to connect the device to itunes and do a back&restore, after the restore process i get an error message on itunes "your request cannot be processed, please try again after sometime" i tried it with my airtel sim card and also at&t sim card but did not work. I contacted at&t and they confirmed that the unlock request was successful but i still get the same error.
Please kindly help me if i need to do someting to be able to activate and unlock my iphone4

Excuse me. I am on a contract with O2 with an iphone 4s, suddenly xmas day it said "no service", took it to o2 who sent it to apple factory who refused to repair it because a screw missing. I wouldnt know have never opened phone in my life,wouldnt know how to, then went direct to Apple Regent St London who also said "screw missing, warrenty void, then produced a phone just out of contract due to upgrade,a vodaphone carrier 3gs, it was unlocked but then told by apple the owner had to go to vodaphone and get it unlocked on their books which could take up to 48 hours, it is now 72 hours later and i have the same error despite backing up old phone with i tunes and i cloud,am very angry and am paying alot for a contract every month, all i can see is "no service and waiting for activation" and all ths started when I upgraded to IOS 6.Am extremely upset and still under warranty but no one seems to want to help me to connect to WiFI, i cannot keep going to Apple Regent Street at lunchtime and be shooed of with excuses, this replacement phone 3gs should work and it doesnt. Am extremely annoyed with the info i have been provded wth by Apple staff.Now I havent had a phone since 25th december.

Cannot start or uninstall iTunes

Last night my power went off and caused me to have to do a system recovery on one of the users of my computer. While I was trying to figure out why the user's desktop was messed up I tried running Itunes. It said there was a new update so I went ahead and updated it. I then went through the recovery process and now I cannot start or uninstall Itunes. When I try to start it says there has been an error and asks me if I want to report it, I have answered yes and no and I also slected the debug option and that had no effect. When I try to uninstall it says it is starting the uninstallation wizard, but it never finishes. I seem to be stuck!

I have the same problem, did you find a solution?

A lot of problem for an error: Cannot start Managed Server through NM

Hi, all. Thank for coming here.
My main problem is cannot start Manager server through Node Manager. I've configured with the same way on my friend's network and It's works but It's wrong with mine.
my weblogic domain:
Machine 1: Administration Server + 1 Managed server
Machine 2: 1 Managed server
all of these servers communicate through SSL protocol. When I try to start Managed Server on remote machine:
output from console which was invoked startWebLogic.sh
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
And this is MS01 log:
starting weblogic with Java version:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Starting WLS with line:
+/opt/Oracle/Middleware/jrockit_160_14_R27.6.5-32/bin/java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=MS01 -Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.system.BootIdentityFile=/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.ReverseDNSAllowed=false -Xrs -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3 -Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.1.35:7001 -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_wlp1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/wlportal_10.3/p13n/lib/system:/opt/Oracle/Middleware/wlportal_10.3/light-portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/lib/system:/opt/Oracle/Middleware/wlportal_10.3/analytics/lib/system:/opt/Oracle/Middleware/wlportal_10.3/apps/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/deprecated/lib/system:/opt/Oracle/Middleware/wlportal_10.3/content-mgmt/lib/system -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/wlportal_10.3/portal/lib/security weblogic.Server+
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Stopping PointBase server...
PointBase server stopped.
And this is output from console which node manager runs on:
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
I tried to start Managed server some times again, but I face up to strange issue, this is output from console which Admin Server runs on (these exception messages throws continuously):
+<Sep 9, 2010 12:42:53 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource-nonXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "p13nDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceAlwaysXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
I can ensure that all of these connection pool has configured to run on 9093 port already. Then I view the DOMAIN_NAME/pointbase.log, it said:
Unable to start the server. start server error: java.net.BindException: Address already in use
I cannot understand what's run on pointbase address ?
All of these error make me angry, because I've configured with the same way on other system and It's work. I've spent all of week to fix these bug, but I'm having nothing :((
Please help me.

Thank Jay SenSharma.
I've looked for these JAVA_OPTION values you said, but I cant found them. That value is content of JAVA_DEBUG option, not JAVA_OPTION. In my situation, JAVA_DEBUG=" " (it's not set by default).
Please re-view my error log:
Node Manager output:
+<Sep 9, 2010 11:32:44 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 11:32:44 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Managed server MS01's log:
+<Sep 9, 2010 11:45:05 PM> <INFO> <NodeManager> <Server output log file is '/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.out'>+
+<Sep 9, 2010 11:45:07 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-ia32 from BEA Systems, Inc.>+
+<Sep 9, 2010 11:45:09 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 9216172 Tue Jan 12 02:07:27 PST 2010+
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://xmlns.oracle.com/weblogic/domain>+
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - /opt/Oracle/Middleware/user_projects/domains/devdomain/<unknown>:11:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>+
+<Sep 9, 2010 11:45:14 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log00002. Log messages will continue to be logged in /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log is opened. All server side log events will be written to this file.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details..+
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+ Truncated. see log file for complete stacktrace+
Caused By: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+ at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+ at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+ Truncated. see log file for complete stacktrace+
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:95)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+ at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+ Truncated. see log file for complete stacktrace+
Caused By: java.lang.RuntimeException: There were errors initializing your configuration: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal store error> org.apache.openjpa.util.StoreException: com.pointbase.jdbc.jdbcUniversalDriver
+ at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:123)+
+ at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.createConnectionFactory(JDBCConfigurationImpl.java:776)+
+ at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(JDBCConfigurationImpl.java:683)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:597)+
+ at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:288)+
+ at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+ at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:597)+
+ at org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:124)+
+ at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+ at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+ at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+ at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+ at weblogic.security.SecurityService.start(SecurityService.java:141)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
Caused by: java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
+ at java.lang.Class.forName0(Native Method)+
+ at java.lang.Class.forName(Class.java:169)+
+ at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:85)+
+ ... 38 more+
+ at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:302)+
+ at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+ at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:+
There are 1 nested errors:
+weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+ at weblogic.security.SecurityService.start(SecurityService.java:141)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>+
+<Sep 9, 2010 11:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 16443>+
+<Sep 9, 2010 11:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>+
+<Sep 9, 2010 11:45:18 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>+
ps:
I've come your weblog and found alot of tips for debugging WebLogic Server exceptions. It's really helpful. Thanks.
Edited by: Doubt_Man on Sep 10, 2010 10:49 AM
Edited by: Doubt_Man on Sep 10, 2010 3:54 PM

Reports server: cannot start stand-alone servers

I have 9iAS 9.0.2.0.1 on RedHat Linux AS. When I try to create/start a new reports server (using rwserver.sh), I get "REP-50001: Server is initializing", but it never starts. My in-process server works, but I can't create any additional servers.
I've made the changes suggested in MetaLink Doc ID 214310.1. But, I still cannot start a stand-alone server.
Any help is greatly appreciated.

The problem was with vncserver. Once I started it with
"vncserver :15 -nolisten local -httpd ${VNC}/classes -cc 3", it started up.

LMS 2.6, cannot start process syslogAnalyzer

Similar Messages

Maybe you are looking for