LMS 2.6 Self Test database.pl fail

Hi,
We had a server crash and when I brought it back up, LMS is having some issues. I imagine this is due to the database not being shut down cleanly. I did a self test and got the message below. I've tried restarting dmgtd but no dice. LMS 2.6 is running on a Solaris 9. Any assistance with this is greatly appreciated. Thanks!
database.pl
FAIL     Self Test Fail to query dfmInv.DbVersion, Error: Database server not found (DBD: login failed)
     Self Test Fail to query dfmInv.SYSTABLE, Error: Database server not found (DBD: login failed)
Tim

Thanks for the info.
I ended up doing complete restore with the LMS restore process. Everything appeared to work fine, but now I'm having some major issues with DFM. None of the alerts are clearing (manually or otherwise), devices are stuck in a Learning state at 10%, and I'm getting some weird errors in dmgtd.log during startup.  I'm getting several alerts about EssMonitor and jrm similar to the ones below.
#2107:TYPE=WARNING:The daemon manager cannot find dependency EssMonitor for EPMServer.  Message ignored
#2107:TYPE=WARNING:The daemon manager cannot find dependency jrm for DataPurge.  Message ignored.
If you have any ideas about this, I would appreciate the input.
Tim

Similar Messages

  • NI USB-6509 Self-Test

    Hello all,
    Does anyone know what the built-in self-test of the NI USB-6509 hardware or any similar digitial I/O hardware does? Does it just confirm the hardware can communicate, or it actually tries to write and read certain digitial I/O lines?
    I just want to have some idea about what it means when the self-test passes or fails.
    Thanks,
    Wenhao

    The self-test is just a diagnostic that checks that the onboard chips are powered properly.  The Test Panels actually check I/O.
    AC - LV Solver

  • Hard Drive failed both postive read and smart short self test

    Hello, my Lenovo Think Pad's Hard Drive failed both targeted read  test (error code WHD20-HJF) and the smart self test (error code WHD16-KPY). I admit that I'm an older user and I have no idea what this means and what is the possible fix for it.
    I am open to all suggestions;
    THANKS,
    Octavious ONeal

    Hi, Octavious
    When the hard drive fails those tests, it's an indication that the drive is dying. It's recommended to back up any valuble data on the hard drive and then replace it soon. The drive may still work for a little while, but it will likely stop working sometime soon.
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • HDD replaced with SSDHDD & Drive Self Test failed hardware scan by LSC

    Hello! Happy new year!
    I bought a new SDDHDD instead of the HDD that came with the laptop when I bought it because it was faulty.
    I want to make sure that the new drive isn't faulty when running the hardware scan using Lenovo Solution Center (LSC), I got this result code: WHD01V000-HK9V1D - Warning for the SMART Drive Self Test. However I tried testing using HD Sentinel and SeaTools but they showed no errors.
    Note: I'm taking LSC seriously because it showed warnings then critical alerts before my first HDD failed so I don't want to ignore it.
    Please let me know what it means and if I should worry or how to fix the problem? Or does it simply not support SDD?
    Thanks for reading this long message! (Sorry)

    Hi, quocphong
    It sounds like the hard drive is running okay overall, but it has some bad sectors in it. You will not be able to read or write to these sectors. That being said, I would first try running a ChkDsk on the hard drive and see if any of the sectors can be repaired. To run a ChkDsk, go to Computer and right-click on the C: drive and select Properties. Navigate to the Tools tab and select the box that says Check now... This should scan the drive for errors and attempt to fix them if possible. The test can take a while, so I would do it when you will not need access to your computer.
    If the test is not able to fix the errors, then I would contact Lenovo at 120-11072 (Toll Free) or +(84) 8 3521 8000 (Standard Charges Apply) and discuss a hard drive replacement with them. As for Windows, you will need to ask for recovery discs as well. Lastly, I would backup everything on the current hard drive so that it is not lost.
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • PCI-MI0-16XE-50 Failing Self-test

    I am using a PCI-MI0-16XE-50 which is failing the self-test in MAX 3.1.1.3004.  I have used the E Series Diagnostic Utility which gives the error "Error 10809 occurred at cwdaq:  Starting DAQ operation Attempted to start a pulse width measurement with the pulse in the phase to be measured (e.g., high phase for high-level gating)."  Windows XP detects the device fine, as does MAX.  The obvious answer is that the device is broken, but is it feasible or economical to have the device repaired?  What tends to cause this type of problem and/or how can it be corrected?
    Thanks,
    Brandon

    Hello C.
    You will need to contact National Instruments for a quote for repairing
    you board. If you bought less than a year ago, it may still be under
    warranty in which case it would not cost you anything to repair.
    However, I would suggest in case you need to pay for repair to consider
    getting one of the new improved and more performent yet low cost M Series devices.
    Hope this helps.

  • PCI-6221 fails self-test in MAX but device manager says it's working

    Hi everyone,
    I bought a few PCI-6221 (37-pin) data acquisition cards and have been able to get one to work but 3 others don't work.
    Device Manager sees them and says they work.  MAX sees them and when I run Self Test, they fail with error number
    -50002.  Motherboards in non-working systems are PC Chips M957G and P25G.  OS is Windows XP Pro with SP2.
    I already tried uninstalling SW and the board, reinstalling SW and the
    board...autodetect etc works fine.  I even reformatted
    the HD on one of the computers and reinstalled the OS.  Anyone have any ideas?  Thanks in advance.  Halden
    [email protected]

    Thanks Tom for your suggestion to try NI-DAQ 8.0.  I just saw it today.  Yesterday,
    I was able to isolate 3 PCI-6221-37 boards as defective because they all wouldn't work in another computer while
    one other identical model card did work in that same computer.  I called to arrange to return them to NI and learned
    that for these 3, I needed NI-DAQ 8.0.  The fourth one was okay
    with NI-DAQ 7.5.  Apparently, this was a known problem. 
    I wish NI would have simply notified me that my boards would
    not work with the software sent with them and sent the NIDAQ 8.0 CD as soon as they knew rather than have me
    waste a day of my engineering time trying to figure it all out.  Booo NI.
    One of the boards has worked for almost a day under NIDAQ 8.0.  I was able to make some progress on the
    system I am building.  But then it stopped working.  LabVIEW
    (version 7.0 executable) programs would not open completely
    or would open slowly.  One that accessed the COM port only (no
    data acquisition) did work.  MAX opened very slowly or not at all
    and when I click on
    Devices and Interfaces, the hourglass is up for a long time and finally the + icon goes away indicating that MAX is not
    aware of any devices being present.  The Windows Device Manager says the board is present and working.  Windows
    Task Manager lists LabVIEW Runtime and MAX when only MAX is open and indicates that MAX is Not Responding.
    I shut down the computer, removed the PCI-6221 board, booted it up again, and MAX is the same way.  I uninstalled
    MAX and NI-DAQ LabVIEW 7.0 support and then reinstalled them.
    Now the MAX loading window is up for more than a minute and NIMAX.exe is listed in Task Manager's processes.  After
    the first minute, LabVIEW Runtime appears in the Task Manager's
    Applications list.  After a while longer, the MAX window finally
    opens
    and MAX is listed in the Applications.  I click on the + icon by Devices and Interfaces in MAX and the hourglass appears
    and Windows Task Manager says MAX is Not Responding.  Eventually, the + icon and the hourglass go away and
    the Task Manager lists LabVIEW Runtime and MAX as Running.
    I shut the computer off for several minutes, started it up again, and MAX is still takes a long, long time to open. 
    I haven't put the PCI-6221 card back in because MAX still isn't working.
    What do you suggest I do next?
    Thanks
    Halden

  • EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instanc

    HI Experts,
    Today i got this alert from oem grid during RMAN bakcup of the PROD database.when i try to connect the database i am able to get into to the DB successfully with out any issues.
    But i am not sure why this error has come and resone behind that.Please advise.
    From: Oracle OEM [mailto:[email protected]]
    Sent: Tuesday, February 22, 2011 11:21 PM
    To: DBA_GROUP
    Subject: EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
    Target Name=PROD.test.edu.au
    Target type=Database Instance
    Host=delhi.win.test.edu.au
    Occurred At=Feb 22, 2011 11:20:33 PM EST
    Message=Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
    Severity=Critical
    Acknowledged=No
    Notification Rule Name=Database Availability and Critical States
    Notification Rule Owner=SYSMAN
    when i check the alertlog file i could see the following
    Tue Feb 22 23:01:36 2011
    Starting control autobackup
    Control autobackup written to DISK device
    handle '/oracledb/rman_backup/PROD/control_c-197342269-20110222-01'
    Tue Feb 22 23:22:42 2011
    Errors in file /oracle/admin/PROD/udump/hubprd_ora_27069.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01438: value larger than specified precision allowed for this column
    ORA-06512: at line 2
    PLease let me know the cause of the issues and solution to overcome this issues.
    Regards,
    Salai

    It would appear that your archive location is full. If it is full, then try to get some more free space there by either deleting the old archives or specifying a different location.
    I don't see any mention of a flash recovery area in the log message, but you may also want to confirm that you have reached your space allocated to the FRA.

  • MyDAQ fails Self-Test and will not work with any software

    I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
    Trying to self-test or reset the device in MAX gives these errors:
    -The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
    -There was a problem resetting the device. Error code: 80040383.
    It also gives this error when trying to use the Elvis Oscilloscope:
    -Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1 
    Possible reason(s):
    NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
    I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked  NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
    Attachments:
    ni_support.zip ‏341 KB

    Hi chaka123,
    I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
    To answer your questions:
    Does the Test Panels work at all?
    I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
    Have you tried to delete the device in MAX?
    Once again, I cannot because it shows up as Flash Firmware Updater.
    Which is the color of the icon on the left side of “myDAQ1”?
    It was green before the uninstall. Now it shows the USB symbol.
    I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device." 
    What folder can I manually point Device Manager to in order to load the correct driver?
    Attachments:
    devicemanager.PNG ‏40 KB

  • DAQCard-6024E Card Fails Self Test - what wrong?

    I am attempting to write a Visual C++ application that uses a DACCard-6024E and I have installed the NI-DAQmx 7.4 drivers.  Measurement and Automation Explorer has detected the card as "Dev1".  An I/O port and IRQ were assigned.
    When I do a "Self-Test", I get the following error message.
    Error
    The device self test has failed.  The error report from the device driver is as follows:
    Error -200020 occurred at Self Test
    Possible Reason(s):
    Self-test of the device has failed.
    OK  
    Am I missing a step that will enable the board?
    Thanks.

    Try removing the device from your PC, then uninstall your DAQmx drivers and install DAQmx 8. Shutdown and put the device back in and see if it passes self-test.
    Michael P
    National Instruments

  • JDBC Adapter - Established database connection failed

    Hi Guys,
    we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the  Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
    So in my point of view we have done everything right during the installation.
    Now the developer tested theJDBC Adapter and he comes back with following Error:
    Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Do you have any ideas?
    Regards
    Markus

    Hello Markus,
    To install JDBC driver follow the how to guide.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
    Configuration of JDBC Adapter for SQL Server
    JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
    Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
    UserID and Password.
    If the connection is not working find the correct port number.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
    JDBC- X I -  R/3 Scenario
    /people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    Thanks,
    Satya Kumar
    Reward Points If it is Useful..

  • Issue while installing WCS using omii.ini: Database ping failed

    Hi,
    I am trying to install WCS on local linux VM. I am following the document 'Oracle WebCenter Sites: Installing on Oracle WebLogic Application Server".
    Following are the things I have been able to do successfully:
    Install Oracle DB, create a database and then create a user for this database
    Install WebLogic server, create domain, create admin server, managed server, and finally create a datasource. THe datasource connection to the DB created in step 1 above is successfull.
    I downloaded the WCS installer from Oracle Website 'WebCenterSites_11.1.1.6_bp1'. I am installing using silent installer using omii.ini file.
    During installation, on receiving the prompt to install CS and CAS applications, I installed them successfully via WebLogic console.
    I tested the URL 'http://localhost:7001/cs/HelloCS' and it showed me the Oracle WCS 11g page.
    Now, when I go back to the wcs installation terminal and hit Enter, it gives following error:
    [2013-07-11 01:32:21.861][CS.INSTALL][INFO] 1. If your platform requires you to manually deploy the Sites application, deploy Sites now. Otherwise, continue with step 2 2. Restart your application server. 3. Test the URL http:////HelloCS to see if application is deployed successfully 4. If the test is successful, press ENTER. URL http://localhost:7001/cs/HelloCS [2013-07-11 01:41:16.841][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction:  Testing user configuration and database connectivity. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.postURL:  PostURL success for http://localhost:7001/cs/HelloCS [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction:  Web Server and Application Server Configuration test finished successfully. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction:  Attempting to Ping the Database. [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing:  Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing:  Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Database Ping was attempted with WCSDataSource as the DSN. The URL that was passed in = http://localhost:7001/cs/CatalogManager. Please Check your connection and property files settings. [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction:  Install was unable to ping the database. Installation has halted. [2013-07-11 01:41:17.461][CS.INSTALL][ERROR] Worker.run. Install failed.                Please check log file.                          Click Yes to modify your install choices      and re-try install.                             Click No to terminate application. 
    It looks like DB ping is getting failed.
    But I am not sure how to resolve this error.
    Please help. I am pasting the content of my bea_omii.ini file that I have used. (Please view as HTML, as formatting is getting lost on this page.)
    Do let me know if any other information is required from my end.
    bea_omii.ini:
    #ContentServer install properties #Thu Apr 17 12:03:27 IST 2008 # Content Server Information # Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall CSInstallDirectory=/home/oracle/WCS # Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared CSInstallSharedDirectory=/home/oracle/WCS/Shared # For delivery installation set Development to false Development=true # CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster #CSInstallType=single # This is to select APPSERVER Note: PORTALSERVER is not supported CSInstallPlatformType=APPSERVER # Set the application/portal server you want to install # Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat) CSInstallAppServerType=wls92 # Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3 # on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3 CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3 # [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain # on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain # [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain CSInstallAdminDomainName=WCSDomain # Option for manual deployment (Should always be set to true) CSInstallbManual=true #Manual deployment needs to set the path where installer has to explode the war CSManualDeployPath=/home/oracle/WCS/deployment # Set the context path for your web application for example /cs/ sCgiPath=/cs/ # Set the database type Possible options #CSInstallDatabaseType=  [SQL Server, DB2, Oracle10]  CSInstallDatabaseType=Oracle10 # Set the data source name CSInstallDBDSN=WCSDataSource # By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster. CSInstallType=single #WEM installation IsWEMInstall=TRUE #hostname where cs is installed CASHostName=localhost # port number of cs installation CASPortNumber=7003 #Server HostName of internally accessible CAS CASHostNameLocal=localhost #Server PortNumber of internally accessible CAS CASPortNumberLocal=7003 #Server HostName where CAS is actually deployed CASHostNameActual=localhost # Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog # com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger LoggerName=org.apache.commons.logging.impl.Log4JLogger # Set the host name where the application will be running CSInstallWebServerAddress=localhost # Set the port number where the application will be running CSInstallWebServerPort=7001 # Set this property to true if you are installing Spark CSInstallSpark=false # Sample Sites Information # Set this true if you want to install Avisports sample site. Avisports=true # CS-Direct and CS-Direct Advantage properties. Please don't touch them ContentCentre=true CatalogCentre=true # Set this true if you want to install CS Engage otherwise false MarketingStudio=true # Set this to true if you want to install Commerce Connectors CommerceConnector=true # Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode FSCore=true # Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore FSEngageCore=true # Set this to true to install Store Schema. This depends on Development and FSCore FSStoreSchema=true # Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore FSEngageStoreSchema=true # Set this to true to install Document Schema. This depends on Development and FSCore FSDocSchema=true # Set this to true to install Sample Visitors. This depends on Development and FSCore FSLocalUser=true # Set this to true to install Pretty URL Package. This depends on Development and FSCore FSPrettyURL=true # Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema FSStoreDemoData=true # Set this to true to install Document Demo Data. This depends on Development and FSDocSchema FSDocDemoData=true # Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema FSEngageStoreDemoData=true # If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema FSSiteView=true # Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre FSAnalytics=true # Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre CCSampleAssets=true # Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre CCSampleAssetsBF=true # Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre MSSampleAssetsBF=true # Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre CCSampleAssetsHW=true # Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre CatCSampleAssets=true # Set this to true to install Hello World sample site.  This depends on Development and ContentCentre CCSampleSiteHW=true # Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF CCSampleSiteBF=true # Set this to true to install Burlington Financial Extensions sample site. MSSampleSiteBF=true # Set this to true to install GE Lighting sample site. MSSampleSiteGE=true # Spark sample site components # Set this to true to install Document Management sample asset types DMSampleAssets=false # Set this to true to install Content Management sample asset types WCMSampleAssets=false # Set this to true to install Base Components SparkSampleSite=false # Set this to true to install Sample Data SparkSampleData=false # Set this to true to install Sample Portlets. Set this true if this is a portal server SparkSamplePortlets=false

    Thanks for your reply Yct.
    I got the ping issue resolved today, there was an issue in the data source. Finally I was able to complete the installation successfully.
    But there is one more issue now. After completing the installation, I am trying to access the URL to get to the WCS login page, but with no success.
    Below, I am mentioning few URLs that I tried, and the outcome:
    http://localhost:7001/cs/HelloCS ,           This URL gives me a page with some static content messages like 'Welcome to Oracle WebCenter Sites 11gR1'. Then there are some text lines in blue color. I think this page is working as expected.
    http://localhost:7001/cs/login , this URL automatically gets redirected to the URL 'http://localhost:7003/cas/login?service=http%3A%2F%2Flocalhost%3A7001%2Fcs%2Fwem%2Ffatwire%2Fwem%2FWelcome' and I get an error message 'Firefox can't establish a connection to the server at localhost:7003.'
    http://localhost:7001/cas/login, this takes me to login page, where when I enter fwadmin@xceladmin credentials, I am taken to JASIG Central Authentication Service page, which is again static, and I can't do anything on this page
    http://localhost:7001/cs/Satellite?c=Page&cid=1327351719456&pagename=avisports%2FPage%2FHomeLayout1 , this takes me to the Avisports site, which is functional
    http://localhost:7001/cs/Satellite?c=Page&childpagename=FirstSiteII%2FFSIILayout&cid=1124747609916&pagename=FSIIWrapper, this takes me to he FirstSit page, which is again functional
    Issue: I am not getting the main login page, where I would get 3 sites(Avisports/FirstsiteII) in the dropdown.
    Looks like there is something wrong going on.
    Following I am pasting my omii.ini file, if it helps:
    #ContentServer install properties
    #Thu Apr 17 12:03:27 IST 2008
    # Content Server Information
    # Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall
    CSInstallDirectory=/home/oracle/WCS
    # Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared
    CSInstallSharedDirectory=/home/oracle/WCS/Shared
    # For delivery installation set Development to false
    Development=true
    # CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster
    #CSInstallType=single
    # This is to select APPSERVER Note: PORTALSERVER is not supported
    CSInstallPlatformType=APPSERVER
    # Set the application/portal server you want to install
    # Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat)
    CSInstallAppServerType=wls92
    # Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3
    # on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3
    CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3
    # [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain
    # on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain
    CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain
    # [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain
    CSInstallAdminDomainName=WCSDomain
    # Option for manual deployment (Should always be set to true)
    CSInstallbManual=true
    #Manual deployment needs to set the path where installer has to explode the war
    CSManualDeployPath=/home/oracle/WCS/deployment
    # Set the context path for your web application for example /cs/
    sCgiPath=/cs/
    # Set the database type Possible options
    #CSInstallDatabaseType=  [SQL Server, DB2, Oracle10] 
    CSInstallDatabaseType=Oracle10
    # Set the data source name
    CSInstallDBDSN=WCSDataSource
    # By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster.
    CSInstallType=single
    #WEM installation
    IsWEMInstall=TRUE
    #hostname where cs is installed
    CASHostName=localhost
    # port number of cs installation
    CASPortNumber=7003
    #Server HostName of internally accessible CAS
    CASHostNameLocal=localhost
    #Server PortNumber of internally accessible CAS
    CASPortNumberLocal=7003
    #Server HostName where CAS is actually deployed
    CASHostNameActual=localhost
    # Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog
    # com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger
    LoggerName=org.apache.commons.logging.impl.Log4JLogger
    # Set the host name where the application will be running
    CSInstallWebServerAddress=localhost
    # Set the port number where the application will be running
    CSInstallWebServerPort=7001
    # Set this property to true if you are installing Spark
    CSInstallSpark=false
    # Sample Sites Information
    # Set this true if you want to install Avisports sample site.
    Avisports=true
    # CS-Direct and CS-Direct Advantage properties. Please don't touch them
    ContentCentre=true
    CatalogCentre=true
    # Set this true if you want to install CS Engage otherwise false
    MarketingStudio=true
    # Set this to true if you want to install Commerce Connectors
    CommerceConnector=true
    # Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode
    FSCore=true
    # Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore
    FSEngageCore=true
    # Set this to true to install Store Schema. This depends on Development and FSCore
    FSStoreSchema=true
    # Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore
    FSEngageStoreSchema=true
    # Set this to true to install Document Schema. This depends on Development and FSCore
    FSDocSchema=true
    # Set this to true to install Sample Visitors. This depends on Development and FSCore
    FSLocalUser=true
    # Set this to true to install Pretty URL Package. This depends on Development and FSCore
    FSPrettyURL=true
    # Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema
    FSStoreDemoData=true
    # Set this to true to install Document Demo Data. This depends on Development and FSDocSchema
    FSDocDemoData=true
    # Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema
    FSEngageStoreDemoData=true
    # If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema
    FSSiteView=true
    # Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre
    FSAnalytics=true
    # Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre
    CCSampleAssets=true
    # Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre
    CCSampleAssetsBF=true
    # Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre
    MSSampleAssetsBF=true
    # Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre
    CCSampleAssetsHW=true
    # Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre
    CatCSampleAssets=true
    # Set this to true to install Hello World sample site.  This depends on Development and ContentCentre
    CCSampleSiteHW=true
    # Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF
    CCSampleSiteBF=true
    # Set this to true to install Burlington Financial Extensions sample site.
    MSSampleSiteBF=true
    # Set this to true to install GE Lighting sample site.
    MSSampleSiteGE=true
    # Spark sample site components
    # Set this to true to install Document Management sample asset types
    DMSampleAssets=false
    # Set this to true to install Content Management sample asset types
    WCMSampleAssets=false
    # Set this to true to install Base Components
    SparkSampleSite=false
    # Set this to true to install Sample Data
    SparkSampleData=false
    # Set this to true to install Sample Portlets. Set this true if this is a portal server
    SparkSamplePortlets=false

  • Database logon failed when opening report with parameter values in CrystalReportViewer

    Hi,
    I designed 2 crystal reports: report A contains parameter fields and report B did not contain any parameter
    I can open both reports in development site using CrystalReportViewer control. When I open the reports in testing site,
    I can open report B but can't open report A. It display error message "Database logon failed". When I set EnableDatabaseLogonPrompt
    to true and try to open the report A again, it shows database connection data which was created on report.
    In addition, it is strange that it displays error "Database logon failed" when I click an item in group tree panel of the report B. This indicates that it can load data from database
    in testing site but it connect to development database when clicking items in group tree panel
    All reports connect to database using Windows Authenication. It use dynamic database connection at runtime
    How to ensure the report always connect database using login data dynamically at runtime?
    Below is my code about database connection:
    string strServerName = null;
    string strDatabaseName = null;
    ReportDocument rptDoc = new ReportDocument();
    rptDoc.Load(strFilePath);
    ConnectionInfo connInfo = new ConnectionInfo();
    TableLogOnInfo logonInfo;
    for (int i = 0; i < rptDoc.Database.Tables.Count; i++)
    logonInfo = rptDoc.Database.Tables[i].LogOnInfo;
    ReportHelper.GetReportConnection(ref strServerName, ref strDatabaseName, strSystemType);
    logonInfo.ConnectionInfo.ServerName = strServerName; 
    logonInfo.ConnectionInfo.DatabaseName = strDatabaseName;
    logonInfo.ConnectionInfo.IntegratedSecurity = true;
    rptDoc.Database.Tables[i].ApplyLogOnInfo(logonInfo);
    rptDoc.Database.Tables[i].Location = rptDoc.Database.Tables[i].Location.Substring(0, rptDoc.Database.Tables[i].Location.Length - 2);
    crvViewer.ReportSource = rptDoc;
    crvViewer.DataBind();
    Development environment:
    - SAP Crystal Reports 2013 Support Pack 1
    - Visual Studio Professional 2012
    - .NET Framework 3.5
    - DDL
    CrystalDecisions.Shared (v 13.0.8.1216)
    CrystalDecisions.Web (v 13.0.8.1216)
    CrystalDecisions.CrystalReports.Engine (v 13.0.8.1216)
    Database connection in crystal report:
    - Database Type: OLEDB (ADO)
    - Provider: SQLOLEDB
    - Integrated Security: True
    Thanks and Regards,
    Tony

    Hi Tonylck
    Try  to pass login info to crystal report dynamically as follows:
    using System;
    using System.Windows.Forms;
    using CrystalDecisions.CrystalReports.Engine;
    using CrystalDecisions.Shared;
    namespace WindowsApplication1
    public partial class Form1 : Form
    public Form1()
    InitializeComponent();
    private void button1_Click(object sender, EventArgs e)
    ReportDocument cryRpt = new ReportDocument();
    TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
    TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
    ConnectionInfo crConnectionInfo = new ConnectionInfo();
    Tables CrTables ;
    cryRpt.Load("PUT CRYSTAL REPORT PATH HERE\CrystalReport1.rpt");
    crConnectionInfo.ServerName = "YOUR SERVER NAME";
    crConnectionInfo.DatabaseName = "YOUR DATABASE NAME";
    crConnectionInfo.UserID = "YOUR DATABASE USERNAME";
    crConnectionInfo.Password = "YOUR DATABASE PASSWORD";
    CrTables = cryRpt.Database.Tables ;
    foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
    crtableLogoninfo = CrTable.LogOnInfo;
    crtableLogoninfo.ConnectionInfo = crConnectionInfo;
    CrTable.ApplyLogOnInfo(crtableLogoninfo);
    crystalReportViewer1.ReportSource = cryRpt;
    crystalReportViewer1.Refresh();
    Ref
    http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-dynamic-login.htm
    Mark as answer if you find it useful
    Shridhar J Joshi Thanks a lot

  • XI 2.0 WorkBench File Adapter Self-Test Error

    I have installed the file adapter on our XI serve and when I perform the Self-Test I get the following error HTTP request failed. Error code: "401". Error message: "Authorization Required".  I have the user  XIRWBUSER defined to the Adapter Engine.  What else am I missing?

    Hi Dan,
    You are thanking a poster for his answer.
    Please next time also give him points.
    See: /people/mark.finnern/blog/2004/08/10/spread-the-love
    This time I did it for you.
    Remember: When you ask a question you also assume the responsibility to assign points.
    Please check your other questions and if the answers were good.
    Spread the love and give some points.
    Thanks in advance, Mark.

  • CR XI R2: Database logon failed. Database Vendor Error Code: 1005

    Hi:
    I am trying to incorporate Crystal Reports XI R2 with in-house application - Windows platform, Oracle9i, Websphere Studio Application Development 5.1, and JVM 1.4.2 with OCI8 driver and JNDI connection.
    I am not getting any error while running it in the project where I first implemented.  If I import a EAR file from that project and deploy it in another project and run it, I am getting error in the new project as follows:
    [10/23/08 18:43:11:843 IST] 40994099 SystemOut     O ERROR - JRCAgent4 detected an exception: Database logon failed. Database Vendor Error Code: 1005
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase.<init>(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException.throwReportSDKLogonException(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
          at    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
          at    at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
          at    at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
    [10/23/08 18:43:27:234 IST] 40994099 SystemOut     O ERROR - JRCAgent4 detected an exception: Some parameters are missing values
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase.<init>(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException.throwReportSDKParameterFieldException(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
          at    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
          at    at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
    [10/23/08 18:43:28:359 IST] 40994099 SystemErr     R Exception at EPFPageFactory.getPage: java.lang.Exception: Error in EPFImapgeObjectInstancesBase.getInstanceProperties: null epfImage.
    Any help or suggestions would be highly appreciated.
    thanks,
    Prakash

    I suspect it is probably just a WSAD configuration issue.  If you have simply moved the EAR from one project to another, it might be missing some libraries or the some of the libraries may have been corrupted in the move, or it might be a problem with the build path.  Try deleting and readding the JRC libraries to the project.  If you are deploying to the test server within WSAD, try creating a new instance of it and deploying the project on the new instance.

  • CRVS2010 Beta 2 - "Database Logon failed" Error, after Upgrade

    Hi,
    Generally: we are using the Crystal Reports in combination with a DataSet, that is filled during runtime and pushed to the report, using "SetDataSource". The Project is an ASP .NET 3.5 Project, published on our server.
    I upgraded my development-machine to CRVS2010 (installed both packages - the CRVS for VS 2010 and the runtime) last week and changed some fields in the Report. The DataSet was left unchanged. Everything is working well on my development-machine, but when I publish the Project to our server, I get an "Databse Logon failed" Error, when I want to create my Report. The CRVS2010 Beta 2 redist Runtime is installed on our server. Here is the code, we use:
    // create new Report
    var report = new Reports.repMyReport();
    // DataSource ds was filled correctly (we checked with export to XML
    report.SetDataSource(ds);
    // Set several Parameters to Report
    report.SetParameterValue("test", "test");
    // Export Report to PDF-Format and open in Browser
    report.ExportToHttpResponse(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, Response, false, "reportName.pdf");
    Response.End();
    The error I get is:
    Database logon failed.
    [COMException (0x8004100f): Database logon failed.]
       CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
       CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +260
    [LogOnException: Database logon failed.]
       CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +325
       CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +315
       CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +650
       CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) +98
       CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName) +98
       CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName) +124
       SprintBoxWeb.BuchungDruck.Page_Load(Object sender, EventArgs e) in D:\Projects\sprnt_erp\SprintBoxWeb\BuchungDruck.aspx.cs:32
       System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
       System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
       System.Web.UI.Control.OnLoad(EventArgs e) +99
       System.Web.UI.Control.LoadRecursive() +50
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
    I already tried everything, found googling the web and/or searching this forum:
    e.g.: perform "verify Database" on all Reports and map the DataSet.xsd again to the Report
    Is that a known issue on the Beta and we should wait for the RC, or does anyone have an idea how to fix that one?
    This error is really annoying!
    Many thanks for your help.
    kind regards
    Reinhard

    Dear Ludek,
    Many thanks for your quick reply. Currently, I have to finish some other things. I will try your ideas next week and give you some feedback then, to keep you informed.
    best regards,
    Reinhard

Maybe you are looking for

  • HP Officejet Pro 8500 A909a Print Cancelled when printing borderless A4

    Hi We have an HP Officejet Pro 8500 A909a that normally works very well. We need to print  a brochure in full colour on A4 borderless and the printer starts printing and then cancels the job itself after printing about a fifth of the page. I have tri

  • Excise details for foreign vendors, Error: 8I565

    Hi Experts, After upgrade from 4.7 to ECC 6.0 system throwing error message 8I565: Vendor Excise details are not maintained. Foreign vendors do not have excise details, Is there any config/ SAP note available to ovecome this issue? Experts Kindly res

  • 10.1.3.5 - Using WSIF binding in BPEL

    Hi, I'm trying to use WSIF binding for a java web service in my bpel process. I'm following the steps given at http://www.oracle.com/technology/pub/articles/bpel_cookbook/juric.html I used Jdev to create wsdl for my java class and enabled WSIF bindin

  • Tool Tip with column Height in CL_GUI_CHART_ENGINE

    Dear All, I am generating Columns chart using the class CL_GUI_CHART_ENGINE. I would like to display the column height of every column as tooltip for that column. How can i achieve it ?? The following is the transformation that i am using - <?sap.tra

  • WD Java or WD Abap??

    Hi, In latest presentations about EHP4 and ESS/MSS, I came to know that SAP will prefer WDA for writing business applications. Especially with FPM for WDA this seems catching up very fast. If ESS/MSS is re-written in WDA (Labs are too fast at this!),