LMS 3.0.1/ UT : AP1200 not discover on UT

Hi,
We don't see AP1200 on UT. We don't see the vlan where all AP1200 belong.
sh ver:
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA2, RELEASE SOFTWARE (fc1)
System image file is "flash:/c1200-k9w7-mx.123-7.JA2/c1200-k9w7-mx.123-7.JA2"
oid and package see doc.
How can I actrive debug for campus and ut, there is so many modules.
Thanks, Elisabeth

You need to be running Campus 5.0.4 or higher to get working end host acquisition on access-points. Then, you must have the acquire end hosts on AP box checked under Campus Manager > Admin > User Tracking > Acquisition. Your APs must also be configured for multiple VLANs.

Similar Messages

LMS 4.2.3 User Tracking not discover any hosts

I have a problem wth User Tracking. Some new attatch to network devices: WS-C2960S-48LPS-L.not show me any MAC and address IP. What should I do in this case? I tried many times Acquisition Actions for this devices, but without any positive results.
From Cisco View and Devices Center all informations are properly displayed. Another devices but not this type (
WS-C2960S-48LPS-L) have a proper informations in User Tracking. About 1000 hosts I can show without problems. Only new attathc devices couldn't manage form User Tracking.
Miroslaw Skorupa

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

LMS 3.2 - UserTracking (UT) data not up to date

Hello,
I use LMS 3.2 with three servers where CS and CM are running on the first server, RME is running on the second one and IPM is running on the third.
The most switches are 3560-24PS-S or 3560-48PS-S with IOS 12.2(46)SE.
Since some weeks I have the problem, that the usertracking data is not up to date.
1. problem:
end hosts are not discovered by CM. all switches are available for CM and data collection works fine.
data collection is running one hour before the user tracking major collection. I scheduled three major runs a day and minor acquisition every 60 minutes.
2. problem:
there are 56000 entries in the UT database, but only 29000 end hosts have a valid "last seen date". the other 27000 hosts have a date of july 2009. the delete intervall is 60 days after every major update. I don't know why they are in the database. some of them have the state "active".
How I can clean the UT database safely so I don't have any old entries in it when I start a new discovery?
One fundamental question: Is it better to use the UT dicovery cycles or to send MAC-notification traps to the CM server?
I think to send traps could be the better way because on a NAC it works fine, too.
Thanks for any advise.
Sven

If you have a 5000 device license, then Campus will only manage 5500 devices. No more will be managed after that. That said, Campus has a recommended limit of 5000 devices total. If you have a 10K license loaded, Campus will attempt to manage more than that, but such a configuration is not supported. you would need to reduce the managed device count to 5000 before contacting TAC. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1101012 for details.

LMS 4.0.1 - inventory does not provide details about ports on T1/E1 HWIC

Hi,
I'm running LMS 4.0.1 on Windows Server 2008 Standard SP2
In the management system I have Cisco ISR 2921 and Cisco ISR 3945 devices with Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card.
The issue is that for some of those devices, the inventory does not discover the ports on the T1/E1 HWIC card
When i run a Detailed Inventory report (attached is a screenshot) it shows that there is T1/E1 HWIC in the device, but it states the it has 0 ports. In the same time these ports are operational and are managed by the Fault Monitor application.
Another thing is, when i use CiscoView to monitor/config the device, it does not show color information about these T1/E1 ports (screenshot attached).
The SNMP settings are verified.
Any idea would could be the problem?
KR,
Velin

Hello Colin,
Thank you for your help.
I have copy the "List Access Servers" in below:
Name Hostname Port
acs001 scvs032.test.com 6021
acs002 scvs033.test.com 6021
acs003 scvs031.test.com 6021
acs004 scvs030.test.com 6021
But, I don't know how to check whether AccessGate is connected to Access Server surely. Because I have Add a New Access Gate following the Oracle Access Manager Access Administration Guide. but it still connect AccessGate unsuccessfully.
Thanks,
Jowvid
Edited by: user12009746 on 2010-5-24 下午10:31

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

2014 Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8

Why is Airdrop on my new Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8.0.2
Bluetooth on.
On same wireless home network.
Selected Airdrop to everyone on my iPhone 5s.
Macbook Pro was bought in August still not discovering my iphone. Airdrop icon in Finder just keeps spinning.
I'm signed into my Apple ID on the both devices. My admin login account for my Macbook is also connected to my Apple ID.
If only i could transfer selected photos to my Macbook!
Help!

Hi there Musicoshi,
It looks like this feature will be avlaible in OS X Yosemite later this fall. Take a look at the page below for more information.
Apple - OS X Yosemite - Apps
With AirDrop, sharing ﬁles has never been easier.
AirDrop makes sharing your files between Mac computers simple. And now it works between Mac and iOS, too. So with just a few clicks on your Mac, you can take a file from any folder and use AirDrop to send it to a nearby Mac or iOS device. It’s perfect for, say, sharing a document with a coworker in the next room or sending a presentation to a client across the table.
-Griff W.

My iphone 5 is not discovered ssid wifi

my iphone 5 is not discovered ssid wifi in near of ap, but most very near of ap why ???? my ios v 6.0.2 but not currect work

Try restarting the iPhone and power cycling the router.
Is the network broadcasting the Wi-Fi address? Do you see any errors when trying to join the network?
Also, take a look at this Apple doc -> iOS: Troubleshooting Wi-Fi networks and connections

Mine is not a question but I received the solution to the iphone 4s not discovering bluetooth, you hold the top button and the home button until the apple logo comes up and then let it reboot, put your bluetooth in pairing mode, and then turn on bluetooth

My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.

My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.

SQL Server 2012 Express Instance is Not Discovered

I have a single SQL Server 2012 Express instance that is the backend database for a small door security application. I just noticed after having deployed the OpsMgr agent months ago that it never discovered the SQL instance. The SQL instance
is, as stated, Express, and it's the only Express instance I have. Is that why it is not discovered? All the documentation I found seems to indicate the opposite -- that Express is discovered and there are steps you can take to exclude Express
instances. I have no overrides set to exclude any instance or any database.
- System Center Operations Manager 2012 RTM (no SP1, no R2)
- SQL Server 2012 MP version 6.3.173.1
- SQL Server is Windows Server 2012
- SQL Server 2012 Express running on a Hyper-V VM. Instance is named DOORSERVER\Eclipse
- Agent is installed and other discoveries seem to be working fine
- No discovery errors in the event log related to SQL, although there is one about the Windows Server 2008 discovery not being able to start, but I'm on Windows Server 2012, so I am guessing that's okay?
- No overrides are set on the discovery
- Discovery has found every other SQL Server 2012 instance (standard and enterprise editions)

Well, just realized I didn't have the latest MP. Upgrading to 6.4.1.0 version of the SQL MP fixed the discovery issue.

My apple TV is not discovering my devices. what do i do?

my apple TV is not discovering my devices. what do i do?

If you are referring to airplay
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US

Failed to load webapp and Could not discover administration URL for server

Not able to deploy application on SOA server.
Hi All,
I am not able to deploy my application to the SOA server as i am getting the below error..I am not using bam server at all and still it is saying "Could not discover administration URL for server 'bam_server1'." plz help.
[07:53:58 PM] [Deployer:149191]Operation 'deploy' on application 'ProjectCreationApplication' is initializing on 'soa_server1'
[07:53:58 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[07:53:59 PM] [Deployer:149193]Operation 'deploy' on application 'ProjectCreationApplication' has failed on 'soa_server1'
[07:53:59 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: Failed to load webapp: '/workflow/ProjectCreation_UI'.
[07:54:01 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:01 PM] Caused by: java.lang.ClassNotFoundException: oracle.bpel.services.workflow.client.worklist.servlet.IntegrateTaskFlowWithTask
[07:54:01 PM] See server logs or server console for more details.
[07:54:01 PM] weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:03 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
[07:54:03 PM] #### Deployment incomplete. ####
[07:54:03 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

Hi Vipin,
Might be the way you're deploying your ADF UI project.
Are you right clicking the name of your ADF UI project in the Application Navigator tab and then clicking "Deploy"? While this works great for your BPM composite project, you'll get errors like this when deploying the ADF project in the same manner.
Dan

Agent Up and Running, uploading, but host not discovered

We recently rebooted one node in a two node RAC. When it came up we were having problems getting information in Enterprise manager. The agent comes up, uploads successfully and everything seem fine, but no updates in EM. We removed the host and all associated targets and tried reconfiguring and now EM cannot discover the host. It sees the agent, but not the host. What could have possibly gone wrong? This was all working fine before the reboot.
Agent Version : 10.1.0.5.1
OMS Version : 10.2.0.5.0
Protocol Version : 10.1.0.2.0
Database version is 10.1.0.3
Running on Red Hat Linux Itanium 3.2.3-47
Targets.xml is empty now on this node.
Edited by: user8720546 on Mar 17, 2010 2:55 PM

Hi Erika,
still agent is not discovering by the host. Please find the details command output. During agent upload i am getting error.
bash-3.2$ ./agentca -d
Stopping the agent using /opt/oracle/OracleHomes/agent10g/bin/emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Stopping agent ... stopped.
Running agentca using /opt/oracle/OracleHomes/agent10g/oui/bin/runConfig.sh ORACLE_HOME=/opt/oracle/OracleHomes/agent10g ACTION=Configure MODE=Perform RESPONSE_FILE=/opt/oracle/OracleHomes/agent10g/response_file RERUN=TRUE INV_PTR_LOC=/opt/oracle/OracleHomes/agent10g/oraInst.loc COMPONENT_XML={oracle.sysman.top.agent.10_2_0_1_0.xml}
Perform - mode is starting for action: Configure
Perform - mode finished for action: Configure
You can see the log file: /opt/oracle/OracleHomes/agent10g/cfgtoollogs/oui/configActions2010-03-23_01-50-58-PM.log
bash-3.2$ ./emctl clearstate agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
bash-3.2$ ./emctl upload agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
bash-3.2$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /opt/oracle/OracleHomes/agent10g
Agent binaries : /opt/oracle/OracleHomes/agent10g
Agent Process ID : 6598
Parent Process ID : 6582
Agent URL : https://kanlddev6201a.us.oracle.com:3872/emd/main/
Repository URL : https://idcovms1c.idc.oracle.com:1159/em/upload
Started at : 2010-03-23 13:52:14
Started by user : bpatra
Last Reload : 2010-03-23 13:52:14
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 342
Size of XML files pending upload(MB) : 40.36
Available disk space on upload filesystem : 31.31%
Last attempted heartbeat to OMS : 2010-03-23 13:53:29
Last successful heartbeat to OMS : unknown
Agent is Running and Ready

DJ 3050A J611 is not discovered

I'm using a laptop with Windows 7 professional SP 1. I connect the printer DJ 3050A J611 with USB and the printer is seen in "Devices and printers". I installed the complete software from HP.
But the printer is not discovered by the software. When I start "Printer setup&software" and choose "connect new printer", then "USB", the rpinter is not discovered.
How to debug this problem?

Hi liwu203,
I suggest using the HP Print and Scan Doctor (PSDR). The PSDR helps resolve and identify many printing and scanning errors, network connection problems, and driver issues. Click here to download and run.
Please let me know if this resolves the issue. if you require further assistance, please provide me with any additional details you can, such as the outcome of the PSDR, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I am trying to connect 2 ipod touch via blue tooth. why is it not discovering another ipod via bluetooth?

I am trying to connect 2 ipod touch via blue tooth. why is it not discovering another ipod via bluetooth?

ashet8 wrote:
I wanted to transfer songs.....
See Here > http://support.apple.com/kb/HT1386
What you can sync
Applications
Audio content—music, podcasts, audiobooks, and iTunes U content

WARNING: Database "DBNAME" is not discovered !!!

Dear Gurus,
After running the datagurd verification in my Grid I get following results :
Initializing
Connected to instance srvldbp03:DMWEB
Starting alert log monitor...
Updating Data Guard link on database homepage...
WARNING: Database DMWEB_SITE2 is not discovered. >>>>> !!!!
Data Protection Settings:
Protection mode : Maximum Performance
Redo Transport Mode settings:
DMWEB_SITE1: ASYNC
DMWEB_SITE2: ASYNC
Checking standby redo log files.....OK
Checking Data Guard status
DMWEB_SITE1 : Normal
DMWEB_SITE2 : Normal
Checking Inconsistent Properties
Checking agent status
DMWEB_SITE1 ... OK
DMWEB_SITE2 ... WARNING: Database DMWEB_SITE2 is not discovered. >>>>!!!!
WARNING: Switchover or failover may not succeed as a result.
Switching log file 35.Done
Checking applied log on DMWEB_SITE2...OK
Processing completed.
My Question ?
What shall I configure in my Dataguard or database parameters in sort it should be "DISCOVERED"?
When looking for information on this ..... there aren't any ....
Thxs if you can help

I've followed instructions as doc ID in metalink :
Problem: Verify Dataguard Configuration Shows Database Is Not Discovered [ID 412812.1]
Solution
1. Apply Grid Control patchset 10.2.0.3 >> I^m in 10.2.0.5
or
2. Apply patch 4917358 >>> So I applied the patch
The issue still there!!!!
Any Clues ?

LMS 3.0.1/ UT : AP1200 not discover on UT

Similar Messages

Maybe you are looking for