LMS 3.0 topology services and email notifications issue

Hi
I have an LMS 3.0 install that was working when I installed it at a customer site a few months back. I went back in to give them an overview of its operation and there are now several issues. Nothing has changed since I installed it because the customer didn't know how to use it.
The issues now are
1. When there is a link failure the mail account that should receive a notifivation gets nothing.
2. In topology services the faled link goes red but when repaired goes to dotted red and never goes back to solid black.
I know the mailing worked previously because I can see previous errors that were fixed being reported about a month back.
Also in DFM all my devices now show as learning under the device discovery page and never move from 10% completed. I found another post that says I need to upgrade to LMS 3.0.1 and DFM 3.0.5
Is it possible this will fix the other issues ?
I have LMS 3.0, DFM 3.0.0, RME 4.1 and CM 5.0
Many thanks, Stephen.

Yes, your versions are plagued by numerous bugs. It is highly recommended you upgrade to LMS 3.0.1, then apply the Campus Manager 5.0.6 and DFM 3.0.5 service packs. LMS 3.0.1 can be downloaded from http://www.cisco.com/cgi-bin/tablebuild.pl/lms301 , and the various required SPs from Common Services > Software Center > Software Update.

Similar Messages

Oracle iLearning 5.0 on Windows and email notifications issue

Hi!
We are upgrading from iLearning 4.3 to iLearning 5.0 on Windows 2000 server and I have a question related to that.
iLearning 5.0 is certified for Windows.
The accompanying release.txt states that:
--'Email', 'Email and Web' notifications options for Learner Rating and Authorized Enrollment/Unenrollment are not available on Windows platforms. Only web-based notifications should be used.
Through a Technical Assistance request (TAR Number 4439000.992 ) I've found that this problem is due to the use of Workflow 2.6.2 stand-alone which requires sendmail, which is not available on Windows.
This worries me because I want the system to be able to:
* notify admin when authorization is needed for enrollment
* notify course participants about changes or a cancelled course.
* Certification reminder and expiration
* Assessment submission
* Notification to all learners currently enrolled in an offering
The suggested workaround from Metalink is to use a Unix/linux server.
Metalink suggestion:
"you can set up a notification mailer on UNIX to work with stand-alone Workflow
hosted on Windows. The following MetaLink article is a step-by-step guide on how
to do this: Note:254973.1 How To Configure UNIX Sendmail To Work With Oracle Workflow Running On Windows
This would be useful if UNIX was an option for me. It is not.
I have some questions:
1)Can I use WorkFlow 2.6.3.5 on windows with iLearning 5.0?
I know Workflow 2.6.3.5 is working with MS Exchange.
2)Can I use sendmail in some form or shape?
IIS 5.0 (or 4.0) has a mail gateway that can be utilized by a sendmail program.
Sendmail software for windows:
http://www.glob.com.au/sendmail/
http://www.indigostar.com/sendmail.htm
http://www.ntsendmail.com/
http://www.windowsitpro.com/Windows/Article/ArticleID/5289/5289.html
Has anyone tried any of theese?
I'd like to make a suggestion to my IT department on how to solve this issue.
Thanx for any help in advance :-)
Kristian Amlie, Bergen Norway

There are a couple of patches available that allow a customer to upgrade their Oracle iLearning database to 10g and with that, upgrade Oracle Workflow to version 2.6.3 which supports email notifications through workflow on windows.
Patch #s are 4321769 and 4485520
Thanks!
Scott

LMS 4.1 Topology Service Question

i have only 1 switch 2960 POE at customer enviroment.
i did run topology service and checked on the right side POE CAPABLE Devices
it shows me that i have 4 switch POE while actually there is only 1 switch POE in real enviroment.
does anyone have any idea about this issue ?
appreciate soonest reply
Thanks

Its hard to tell without getting the info requested but check the DCR to see how its identified as which device type it is. And compare that to the inventory hardware report and the actual device itself.
1. Check the DCR to verify the correct device type is defined for the incorrectly reported devices.
2. Were the devices automatically discovered or added manually to LMS?
3. Re-run a a data collection:
http://www.cisco.com/en/US/partner/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/monitoring_troubleshooting/mnt-topo.html#wp1044599
Post the ani.log and the show ver requested after data collection completes.

LMS 4.1 topology services

Our LMS cannot start topology services.
we got the following error:
Cannot connect to ANIServer: ANIServer7.0-lms
Probable Cause
1. Unknwown Hostname
2. Unknown Error
Recommended Action
1. Check if the Hostname is DNS resolvable
2. Check whether the ANIServer process is up and running.
Where & how can i fix this problem. I dont know where to find ANIServer.
Please advice

1. Has it ever worked? If yes, has anything changed? If no, then your installation may be suspect.
2. Do you get the same error when you are at the server itself (as opposed to accessing LMS remotely via a browser)? If yes, then the ANIServer process is likely not running. Look here for instructions on how to perform server self test and restart processes.
3. If the problem is limitied to client acess, I'm assuming you've checked suggestion #1 in your post. Beyond that, I have seen a similar issue when Java is not running the exact version (1.6.0_24) recommended by the LMS. I've also seen a clear of the Java cache remedy this issue.
Hope this helps.

Facebook Notifications and email notifications on ...

Hi
Is that possible Facebook Notifications and email notifications on sleeping screen nokia 808 like it had on N9..
On my 808 it shows only msgs and miscalls....any fix??
Thanks

not possible unless the app supports that behaviour. but email notifications and on notification lights has been broken on Symbian for a while, and as Symbian is in maintenance mode, is unlikely to see a fix, possibly ever.

Why can't I set my downloaded .dm ringtones as text and email notifications?

I have an HTC Incredible 2; I paid for and downloaded several ringtones from the Verizon store, two of which I wanted to specifically use as the text and email notification sounds. I then had the already discussed problem of not being able to find the newly downloaded ringtones immediately, but from the postings on here and the Adriod forums, I followed the directions to set up the folders titled Ringtones, Notifications, and Alarms on my sdcard, and moved the downloaded ringtones into their respective folders. When I opened up the Personalize menu, under Sounds I was immediately able to find the ringtones I'd placed in the ringtone folder, but my phone wouldn't recognize the ringtons I'd placed in the Notifications folder.
I downloaded the app Zedge, downloaded specific Notification sounds (.mp3, and they work). I also downloaded .mp3 ringtones and then moved them into the Notifications folders, and THAT worked. The problem seems to be that these are .dm files? Is my phone unable to read .dm files as Notification sounds? Or is there something I missed? Something else I can do?
I looked all over for software that will convert .dm files to .mp3, found a suggestion calling for the deletion of a couple of the lines of code from within the .dm file using Notebook ++, but that didn't work. I don't remember seeing anywhere in the store that these ringtone files come in the protected .dm filetype; that many players will not be able to play them, and that I won't be able to use them for notification sounds?
Ay one have any suggestions? Verizon: am I doing something wrong?
Thanks in advance for any help.

Usually when you purchase ringtones from the Verizon store, you can only use them as ringtones. Since you have a smartphone, an app would be the best bet. You can find almost any song you're looking for in a free ringtone app, there's no need to purchase them.

Why am I all of a sudden getting all my text and email notifications in Spanish? How do I change back to English? Can't find in profile settings?!

Why am I all of a sudden getting all my text and email notifications in Spanish? How do I switch back to English? I can't find that option in profile or notification settings . . .

elliew,
That's a great point! If all other messages and apps on your phone are in English, the preferred language may need to be updated on your account. If this is the case for any of our customers, just reach out to our customer support team at 800-922-0204 or http://vz.to/1vsIHJq .
BrianP_VZW
Follow Us on Twitter @VZWSupport

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Receiving text and email notifications while on call

While I'm on a call, I receive text and email notifications (by a sound and a buzz). Is there a way to shut this off, as it's annoying when there are multiple messages coming through.

Sure; go to settings > sounds and set "new text" and "new VM" to off.
Of course this turns them off ALL the time; your only choice ( I am sure there is a hack for this oversight out there somewhere, though)
This is not a business class smartphone ; its an iPhone.

Email notification issue in some schemas

Hi,
My problem is almost identical as here DBMS_SCHEDULER send email notification issue
One privileged scheduler user - user1 receive email notifications while two another (user2, user3) no.
More plot is below i know 'what' resolve the problem but don't know how to do it :-)
I want to execute code below on user3 schema, we tried this successfully on user2 (code executed directly on schema with temporary sys.dbms_aq access) so he receive his notifications.
Problem is - we do not have direct access to second account (user3) how to execute this code as user3 ?
declare
reginfo1    sys.aq$_reg_info;
reginfolist sys.aq$_reg_info_list;
begin
reginfo1    := sys.aq$_reg_info('SYS.SCHEDULER$_EVENT_QUEUE:SCHED$_AGT2$_X',
                                  1,
                                  'plsql://SYS.SCHEDULER$_JOB_EVENT_HANDLER',
                                  null);
reginfolist := sys.aq$_reg_info_list(reginfo1);
dbms_aq.register(reginfolist, 1);
end;
Already tried create procedure on user3 and execute immediate annonymous block but it still register with USER# 1 not 3 in DBA_QUEUE_SUBSCRIBERS.
More detailed plot:
Jobs for user2 and user3 was created by user1, so JOB_CREATOR was user1 but OWNER was user2 or user3.
We started with notifications configuration witch was ended with error on both user2 and user3 accounts:
ORA-24093: AQ agent SCHED$_AGT2$_XX not granted privileges of database user1
W get rid wit this using
dbms_aqadm.enable_db_access(SCHED$_AGT2$_2, user1);
dbms_aqadm.enable_db_access(SCHED$_AGT2$_3, user1);
So user1 get privilege on agents for user2 and user3
I believe error was already there because DBMS_SCHEDULER.add_job_email_notification is more automatic it probably registered subscriber that belongs to user2 and user3 with wrong USER# ID that belongs to user1.
Database is 11.2.0.3

it doesn't work because notifications are set from user1 account so USER# is still 1 even when I removed record first.
This is my aproach based on Ask Tom: On Becoming Others, Limits, and Restoration
>sqlplus user1
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
SQL> grant execute on sys.dbms_aq to user1;
Grant succeeded.
SQL> alter user user3 grant connect through user1;
User altered.
SQL> connect user1[user3]
Enter password:
Connected.
SQL> create or replace procedure sched_not_add_q as
2    reginfo1    sys.aq$_reg_info;
3    reginfolist sys.aq$_reg_info_list;
4 begin
5    reginfo1    := sys.aq$_reg_info('SYS.SCHEDULER$_EVENT_QUEUE:SCHED$_AGT2$_3',
6                                    1,
7                                    'plsql://SYS.SCHEDULER$_JOB_EVENT_HANDLER',
8                                    null);
9    reginfolist := sys.aq$_reg_info_list(reginfo1);
10    dbms_aq.register(reginfolist, 1);
11 end;
12 /
Procedure created.
SQL> exec sched_not_add_q;
PL/SQL procedure successfully completed.
SQL> drop procedure sched_not_add_q;
Procedure dropped.
SQL> connect user1
Connected.
SQL> revoke execute on sys.dbms_aq from user3;
Revoke succeeded.
SQL> alter user user3 revoke connect through user1;
User altered.
SQL> exit;
>
So it works now.

Android 2.2 update coming in early September- Will it address the email notification issues??

The upcoming Android 2.2 update for Droid X. Will this update address the email notifications issues?? I don't have a corporate email account, but use my Droid X for my personal business. I love this phone but the email is annoying. The emails are not coming through quick enough, I don't get notified when new email arrives. I have to do a refresh to lear that I have new emails in my inbox.
I want like to know if the upcoming 2.2 update will address these issues for personal email like aol, yahoo etc. I know they mentioned something about exchange servers being faster. This is a disappointment for me, I thought I have push email with Droid X but not really. Can Verizon comment on this?
Thanks,

I did all those, ie. set my email config to push email, battery on performance mode, check my outgoing and incoming servers and ports. All are corect settings, I even configured all my aol accounts with gmail settings to see if that would work but still not getting push emails. I even did a factory reset. I know this is an issue because I also checked Motorola support forums, a lot people were experiencing what I am going except that I think most them have corporate email and exchange issues.
I don't know whether this could be addressed with the upcoming 2.2 update not just for corporate but personal emails as well, VERIZON ? Motorola??
Thanks

Soa suite and email notifications

Hi,
I tried to send some email from bpel and from humantask but this fails. Does email works in the TP3 soa patch
I configured the oc4j-ra.xml and the workflow-notification-config.xml but I got these errors
SEVERE: <.>
java.lang.NullPointerException
     at oracle.bpel.services.workflow.task.notification.TaskNotifications.retrieveWorklistBaseAddressInTransaction(TaskNotifications.java:1835)
     at oracle.bpel.services.workflow.task.notification.TaskNotifications.retrieveWorklistBaseAddress(TaskNotifications.java:1819)
     at oracle.bpel.services.workflow.task.notification.TaskNotifications.getWorklistApplicationLink(TaskNotifications.java:1804)
08/02/11 22:28:46 ASNSDriver.setEmailRecipientAddresses () IN
11-feb-2008 22:28:46 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <oracle.bpel.services.notification.queue.sender.MDBConsumer.processNotification> Error for message ID 2dd786769ef14db8:19a687fa:1180a60befe:-7ff4 ERROR MESSAGE : ORABPEL-10342
Error while sending {0} notification.
Could not send notification.
Check configuration of underlying Channel specific driver.
Invalid recipient address specified for notification.
Check Workflow Notification Configuration. Ensure that Email/IM recipient address is valid.
bpel error
08/02/11 22:28:47 ASNSDriver.onStatus () Received Status :: Channel Message Id:0a66673c0a0a0a1800aa91efe0145d1a
, Addressed to :EMAIL:[email protected], Status Content :No matching drivers found for sender address = EMAIL:[email protected],
Status Type :DELIVERY_TO_DRIVER_FAILURE, Received at :Mon Feb 11 22:28:46 CET 2008

here oc4j-ra.xml
<?xml version="1.0" encoding="UTF-8"?>
<oc4j-connector xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/oc4j-connector-11_0.xsd"
schema-major-version="11" schema-minor-version="0">
<resourceadapter>

<config-property>
<config-property-name>SendingQueuesInfo</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>OraSDPM/QueueConnectionFactory:OraSDPM/Queues/OraSDPMDriverDefSndQ1</config-property-value>
</config-property>
<config-property>
<config-property-name>InstanceName</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>Email-Driver</config-property-value>
</config-property>
<config-property>
<config-property-name>Capability</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>BOTH</config-property-value>
</config-property>
<config-property>
<config-property-name>SupportedDeliveryTypes</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>EMAIL</config-property-value>
</config-property>
<config-property>
<config-property-name>SupportedContentTypes</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>text/plain, text/html, multipart/mixed, multipart/alternative, multipart/related</config-property-value>
</config-property>
<config-property>
<config-property-name>Cost</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>Speed</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>SupportedCarriers</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>SupportedProtocols</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>SupportsCancel</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<config-property>
<config-property-name>SupportsReplace</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<config-property>
<config-property-name>SupportsTracking</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<config-property>
<config-property-name>SupportsStatusPolling</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<config-property>
<config-property-name>SupportedStatusTypes</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>DELIVERY_TO_GATEWAY_SUCCESS, DELIVERY_TO_GATEWAY_FAILURE, USER_REPLY_ACKNOWLEDGEMENT_SUCCESS, USER_REPLY_ACKNOWLEDGEMENT_FAILURE</config-property-value>
</config-property>
<config-property>
<config-property-name>DefaultSenderAddress</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>[email protected]</config-property-value>
</config-property>
<config-property>
<config-property-name>SenderAddresses</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>[email protected]</config-property-value>
</config-property>

<config-property>
<config-property-name>MailAccessProtocol</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>IMAP</config-property-value>
</config-property>
<config-property>
<config-property-name>RetryLimit</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>-1</config-property-value>
</config-property>
<config-property>
<config-property-name>MailDelFreq</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>600</config-property-value>
</config-property>
<config-property>
<config-property-name>AutoDelete</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>true</config-property-value>
</config-property>
<config-property>
<config-property-name>Debug</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<config-property>
<config-property-name>CheckMailFreq</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>30</config-property-value>
</config-property>
<config-property>
<config-property-name>ReceiveFolder</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>INBOX</config-property-value>
</config-property>
<config-property>
<config-property-name>OutgoingDefaultFromAddr</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>[email protected]</config-property-value>
</config-property>
<config-property encoded-credential="true">
<config-property-name>OutgoingPassword</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>OutgoingUsername</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>OutgoingMailServer</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>smtp.xs4all.nl</config-property-value>
</config-property>
<config-property>
<config-property-name>IncomingMailServer</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>imap.xs4all.nl</config-property-value>
</config-property>
<config-property>
<config-property-name>IncomingUserIDs</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>ebiemond</config-property-value>
</config-property>
<config-property encoded-credential="true">
<config-property-name>IncomingUserPasswords</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>xxxx</config-property-value>
</config-property>
<config-property>
<config-property-name>IncomingMailIDs</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>[email protected]</config-property-value>
</config-property>
<config-property>
<config-property-name>OutgoingMailServerPort</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>25</config-property-value>
</config-property>
<config-property>
<config-property-name>OutgoingMailServerTLS</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<config-property>
<config-property-name>IncomingMailServerPort</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>143</config-property-value>
</config-property>
<config-property>
<config-property-name>IncomingMailServerSSL</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<config-property>
<config-property-name>ProcessingChunkSize</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>100</config-property-value>
</config-property>
<config-property>
<config-property-name>ImapAuthPlainDisable</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>false</config-property-value>
</config-property>
<outbound-resourceadapter>
<connection-factory connector-name="Email-Driver" location="Email-Driver">
<description>Email-Driver</description>
<connection-pooling use="private">
<property name="minConnections" value="0"/>
<property name="maxConnections" value="16"/>
<property name="scheme" value="dynamic"/>
<use-connection-pool>DriverConnectionPool</use-connection-pool>
</connection-pooling>
<connectionfactory-interface>oracle.sdp.messaging.driver.DriverConnectionFactory</connectionfactory-interface>
</connection-factory>
</outbound-resourceadapter>
</resourceadapter>
</oc4j-connector>
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<HWFMailerConfiguration xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService" NotificationMode="EMAIL">
<ASNSConfiguration>
<Name>Default</Name>
<EmailFromAddress>[email protected]</EmailFromAddress>
<EmailReplyToAddress>[email protected]</EmailReplyToAddress>
<EmailRespondToAddress>[email protected]</EmailRespondToAddress>

<AlertTriggerErrorCount>10</AlertTriggerErrorCount>
<EmailInboundFilter>
<EmailFilterRule>
     <EmailFilterStringToMatch/>
     <EmailFilterAction/>
</EmailFilterRule>
</EmailInboundFilter>
</ASNSConfiguration>
<CustomNotificationServices>
<All/>
<Email/>
<Voice/>
<Fax/>
<Pager/>
<SMS/>
<IM/>
</CustomNotificationServices>
</HWFMailerConfiguration>

Making checkbox selections/options visible on the request details and email notification details -FIM 2010 R2

How do I make the checkbox selections made by users in FIM RCDC visible on the email notifications and on the request details on the request in the portal?
Phina

Congrats to Wim on a great article!
Forefront Identity Manager Technical Guru - October 2014
Wim Beck
Event Driven Scheduling of Forefront Identity Manager (FIM) using a Windows Service
Ed Price: "Fantastic job on formatting, the code, and all the explanations! The TOC and References are a nice touch!"
PG: "Nice innovative solution, that is a nice add-on to existing solutions. "
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Ciscoworks LMS 4.0 – Email Notifications Issue

We currently use Ciscoworks LMS 4.0 with over 1000 devices in the database. I'm a LMS novice. And have been assigned the task of minimising the amount of email notification’s we receive, as if one device goes Operationally Down all devices off that switch also send alerts to the email notification group, which in turn overwhelms the mailbox.
The ports are configured not to log or send snmp traps.
no logging event link-status
no snmp trap link-status
So any advice on how we can limit these alerts being generated would be much appreciated.
Thanks in advance.

Hi Nessie,
Go to Monitor > Fault Settings > Setup > Fault Device Details
select the device and click on view then Click on the hyperlink or the device name\ip address
that will bring a new window from there click on Interface and chanaged the Managed state from ture to FLASE for those interfaces for which you do not want ALERTS.
Thanks-
Afroz
[Do rate the useful post]

LMS 3.2 don't send emails notifications

Hi All,
I have installed LMS 3.2 and DFM don't send email notifications. Here is the NOS.log file.

1. Ping your smtp server if its reachable from LMS.
2. Telnet to the SMTP server and see if it responds.
telnet SMTP_SERVER 25
type "helo"

LMS 3.0 topology services and email notifications issue

Similar Messages

Maybe you are looking for