LMS 3.2.1 not discover ML cards(ONS)

I have installed LMS 3.2.1 and RPM(ATM technology) can be seen but not ML card(ONS). Also LMS discovered lot of interfaces (int vlan) one of the core switches and marked them as 'unreachable'. How can delete these when LMS marked as unreachable? Any suggestion is much appreciated.

The ONS ML100T cards (or any ONS cards for that matter) are not supported devices in Ciscoworks. Please see the supported devices list.
When LMS discovers a devices, it will try to manage all of the device's IP addresses. Unreachable ones (suc as SVIs you can't get to from LMS) need to be manually removed from managed status. It's been a while since I've used an LMS 3.2, but I believe that's set up under detailed device view in DFM.

Similar Messages

Mega 651 will not recognize multi card in Win XP Pro

I have been using my Mega 651 since the begining of January 2004 and have been a satisified user with only a few gliches since reciently.
My Configuration
Celeron 2.4 400 Mhz FSB
512 Meg PC 2700
WD 160 GB Hard Drive
IO Magic DVD +-RW/+-R DVD drive
and most reciently (about 1 month ago)
ATI 9200 Video Card
Dual Boot with Windows 2000 Pro and Mandrake 10.0 (95% W2k)
Until just last week I had very few gliches except for an anoying problem where the CD drive would stop working. The symptoms were the drive would not eject automatically and on reboot, the post would not discover the IDE devices. I found that if I removed the cover and reset the data cable, then the system would get back to normal.
But this is not why I am writing here.
Last week the system got into a very strange startup loop. It would boot into windows Pro and during the startup, would reboot, and then restart. I tried to boot into safe mode and did not have the problem so I determined that the problem was software and tried to do a repair from the installation CD. That did not work so I decided to do an upgrade to Win XP Pro. When installing Win XP I discovered a new and unusual problem. That was that the system would pause for about 60 sec when booting after finding the mother board and before reporting on the IDE devices. It still pauses like this. I also found that the reboot on startup problem continued so I decided to install Win XP Pro clean, on the hard drive, in its own windows directory. The new install went very well and I am in general pleased with win XP. But I do have two new problems now.
1. Windows insists on identifying the multi card device as a floppy, I tried to remove the device drivers and install a removable HD driver but XP rejects the removable devices and insists on reinstalling the floppy driver. So I can not access my CF or SD cards.
2. I still have a long pause before the post reports the IDE devices, the hard drive and the DVD drive. Both devices seem to function OK when up and running
Any comments on either problem.
Thanks,
Charlie Girdosky
My first try at upgrading to WinXP Pro

I don't have the 651, but the 865. The 865 came with a Mega disc and required installing the Intel drivers from the disc. Since the 865 is driven primarly by USB, windows would attempt to assign a driver to motherboard and devices, but would inevitably be wrong. Only by installing the Intel drivers were things found properly.
Is there any chance there are such drivers with the 651 as well?

Cant get a song gift that a friend sent me.... not a gift card

my friend sent me a song as a gift and now i cant get it. i haveno clue how to redeem that. its not a gift card issue.

YES I AM AWARE OF THIS !
All songs i have discovered are greyed out and a complete album I have bought will NOT fully download and stops just short of the complete download then fails .

Apple Bluetooth Keyboard not 'discovered.'

I just bought a new Apple Bluetooth Keyboard and a D-Link DBT-120 USB Bluetooth Adaptor.
Though System Preferences (10.3.9) shows Bluetooth and the Bluetooth icon appears in the menu bar... the keyboard refuses to be 'discovered.' I have tried numerous USB ports (both directly on my box and a USB 1.1/2.0 card installed) and have flipped the keyboard on/off switch back-and-forth for each USB port I've tried. Still the keyboard is not 'discovered.'
This is on a G3 B/W with numerous upgrades. Otherwise this box has been superb since I bought it right after it was originally released.
Any help would be greatly appreciated.
Thanks.
Mac OS X (10.3.9)

Hey there GreggRocky,
It sounds like your bluetooth keyboard profile is setup in your Bluetooth preferences but is not pairing up like it is supposed to. I want to recommend removing the device from your bluetooth preferences and setting it back up.
1. Choose Apple menu -> System Preferences.
2. Click Bluetooth.
3. Click Devices.
4. Select the device you want to delete from the Bluetooth Devices listing.
5. Click the Delete Pairing button.
6. Click Delete or "Disconnect and Delete".
From: Bluetooth: How to Delete a Paired Device
http://support.apple.com/kb/ta27116
Then:
Bluetooth: How to set up your Apple Wireless Keyboard
http://support.apple.com/kb/HT1809
Thank you for using Apple Support Communities.
All the best,
Sterling

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

How do i use my itunes gift card money and not my credit card

How do i use my itunes gift card money and not my credit card
My ipod told me that i had to put in a credit card and because of that i put in my moms wit her permission. but the thing is i do not want to use the money on her credit card. i hav a 10 dollar itunes gift card in it already and none of it is used up. i want to use that money
how do i do it

Open iTunes on your computer. In the iTunes Store log into your iTunes Store account and view your account. Select Edit Payment Information. In the credit card choices I would choose None. That will remove your Mom's CC info. Next under iTunes Gift Cards and Certificates click the little arrow to redeem your Gift Card. Then follow the instrction to redeem your GC.
You can also do this on your iPod, but it is more complicated to describe how to do it and to actually do it. It is easier to do in the iTunes on your computer.

HT5622 how do i use my apple id credit not my credit card

how do i use my apple id credit not my credit card as my apple id has money on it but it keeps trying to use my credit card instead of the credit thats on it

Some Purchases require a Credit Card.
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I have an iTunes account with a $25.00 credit but everytime I go to purchase a song, it goes to my credit card details. How do I use the iTunes credit and not the credit card?

I have an iTunes account with a $25.00 credit but everytime I go to purchase a song, it goes to my credit card details. How do I use the iTunes credit and not the credit card?

Just to confirm, you are logged into the iTunes Store using the account in which the balance exists, and the balance is showing at the top of the iTunes Store window? And you're not trying to purchase gifts for someone else?

When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

Hi Angela1313,
I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
iTunes Gift balances
http://support.apple.com/kb/ht5035
Learn more
Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
Thanks for using the Apple Support Communities!
Cheers,
Braden

2014 Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8

Why is Airdrop on my new Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8.0.2
Bluetooth on.
On same wireless home network.
Selected Airdrop to everyone on my iPhone 5s.
Macbook Pro was bought in August still not discovering my iphone. Airdrop icon in Finder just keeps spinning.
I'm signed into my Apple ID on the both devices. My admin login account for my Macbook is also connected to my Apple ID.
If only i could transfer selected photos to my Macbook!
Help!

Hi there Musicoshi,
It looks like this feature will be avlaible in OS X Yosemite later this fall. Take a look at the page below for more information.
Apple - OS X Yosemite - Apps
With AirDrop, sharing ﬁles has never been easier.
AirDrop makes sharing your files between Mac computers simple. And now it works between Mac and iOS, too. So with just a few clicks on your Mac, you can take a file from any folder and use AirDrop to send it to a nearby Mac or iOS device. It’s perfect for, say, sharing a document with a coworker in the next room or sending a presentation to a client across the table.
-Griff W.

I want to setup my 9 year old for family sharing and seperate iTunes account but do not have credit cards

I am unable to setup a new iTunes account / family sharing for my 9 year old as I do not have credit cards, it seems that it is only possible to do so with a credit card, however I feel it is unfair that I would need to apply for a credit card just so that my child can be safe online

Changing payment info : http://support.apple.com/kb/HT1918
Or if you haven't created the account yet then there are instructions on this page for how to create one without giving credit card details : http://support.apple.com/kb/HT2534 (e.g. https://discussions.apple.com/message/24321860#24321860)

HT1267 I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my Ne

Hi there,
I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my New Phon?!!
Please let me know how I can get this sorted as soon as possible!! Thank you very much

You can create an Apple ID without a credit card, see this article:
Create an iTunes App Store account without a credit card
Check this post about iPhones from Iran:
Re: Why Apple does not support from Iran? And why not open a store in Iran?

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

My iphone 5 is not discovered ssid wifi

my iphone 5 is not discovered ssid wifi in near of ap, but most very near of ap why ???? my ios v 6.0.2 but not currect work

Try restarting the iPhone and power cycling the router.
Is the network broadcasting the Wi-Fi address? Do you see any errors when trying to join the network?
Also, take a look at this Apple doc -> iOS: Troubleshooting Wi-Fi networks and connections

Mine is not a question but I received the solution to the iphone 4s not discovering bluetooth, you hold the top button and the home button until the apple logo comes up and then let it reboot, put your bluetooth in pairing mode, and then turn on bluetooth

My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.

My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.

LMS 3.2.1 not discover ML cards(ONS)

Similar Messages

Maybe you are looking for