LMS 3.2.1 with WS-C4500X-16 (Supported Device)?

Hi,
is the device WS-C4500X-16 Supported in LMS 3.2.1?
i tried to serch it in the Supported Device Table for LMS 3.2, but i didnt found the exact module (4500x).
here are the link for the:
Supported Device Table for LMS 3.2
thanks
dawit

Hi Dawit
Do you have device available with you? If yes then it will be better if you can check sysObjectID (1.3.6.1.2.1.1.2)
of device and then check in supported device table.
It always good to check device support with sysObjectID for accuracy.
Thanks
Mahavir

Similar Messages

LMS 3.0.1 with DEC 2007 update

Hi,
I have installed LMS 3.0.1 with Dec 2007 update,i have done custom installation and after that i installed 2007 update,after completing installation and update ,when i start LMS the process of LMS are not coming up for very very very long time and all process are down even DCR server is down,attachd are the logs,
Pls suggests Experts,
Thanks in Advance

It sounds like you may still have another process failure if processes take a long time to startup. Post the output of the pdshow command from the server.
As for logs, all of them are found under NMSROOT/log on Windows. Some of the logs are named after the processes to which they correspond (e.g. DCRServer.log). However, you shouldn't typically look through logs. Many of them will contain "normal" errors.

With the limit of 5 devices per itunes account, I am wondering if I can have 2 itune accounts on the same computer? We have many idevices and I am not sure how to manage them all.

With the limit of 5 devices per itunes account, I am wondering if I can have more than 1 itunes account on my computer?

The limit of five applies only to computers, not to iOS devices, if that's what you're concerned with. But yes, you can have content from up to five different iTunes Store accounts on any given computer or iOS device.
Regards.

How do i get my iphone to sync with the itunes on my device?

how do i get my iphone to sync with the itunes on my device?

Try viewing this article: http://support.apple.com/kb/ht1386

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

With iCloud activated on iOS devices, how do I manage syncing with iTunes?

Guess it's time to take a class at the Apple Store (there's an app for that)
Two Questions:
Question 1
I have turned on iCloud in my iPad and iPhone5 for contacts, calendars, reminders, Safari, Passbook (iPhone only), and Find my iPhone/iPad.
I am not using iCloud for backups, email or photo stream because for many reasons I choose to avoid WiFi.In the iPhone User guide (page 57) it says, "if you use iCloud to store your contacts, calendars.....don't also sync them to your device using iTunes."
When I set up the devices in iTunes, i checked "Automatically sync contacts, calendrs, bnookmarks, notes and email." Now I want to modify that setup. However, if I simply plug in the devices to the computer I'm going to get an automatic sync and I understand that can unnecessarily duplicate data.
How to resolve this?
Can I just turn OFF the iCloud features on each device, attach the device to the computer, and reconfigure iTunes to stop the auto-sync of the contacts, etc.? Then after ejecting the device, I turn the iCloud features back ON?
Question 2
I've been downloading apps, music, and books in iTunes and then syncing them to my devices. How does this change with iCloud?
On each device I've gone into Settings-Store and activated Automatic downloads of Music, Apps, Books.
Now, when I go to my PC and log in to iTunes to order an app, book, music, do I still have to attach each device to the computer in order to obtain the downloads?
What about apps I obtain directly from a device?

For your first issue, without connecting your iPad open iTunes on your computer and go to Preferences and on the Devices tab check "Prevent...from syncing automatically". This will disable automatic syncing when you connect your iPad, allowing you to change your settings without syncing. Next, connect your iPad, click on the name of your iPad on the left side of iTunes and to to the Info tab and uncheck the data you no longer want to sync with iTunes (such as contacts and calendars). When done making you changes, click Apply at the bottom (this will sync your phone with the new settings). If you prefer, you can then go back to iTunes preferences and re-enable automatic syncing.
You will continue to sync your iTunes media such as music and apps with iTunes as you did before. These are not stored or synced with iCloud (although you can redownload media purchased from the iTuens and app stores in the future if you need to; however, this has nothing to do with your iCloud account).
If you have enabled automatic downloads for your Apple ID, when you purchase apps, music or books in iTunes using this Apple ID it will automatically be downloaded to your iPad. If you purchase them on your iPad, they will be automatically added to your iTunes library when you sync your iPad.

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining . if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

Welcome to Apple Support Communities
Boot Camp Support Software 5.0.5033 supports Windows 8.1 and can be used with that version. The Mid 2011 iMac is compatible with Windows 8, so you should not have any problem by installing Windows 8.
Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Blackberry 10 the data isn't compatible with the version of the device software that you are currently running

Hi,
my update to 10.3.1.1565 messed the handwriting input up on my phone. so I tried to downgrade to 10.2.1, upon doing so all my files were wiped, however I thought I was being smart by doing a complete backup this morning while running 10.3.1.1565 prior to attempting the os downgrade to 10.2.1 using BlackBerry Link,
Anyway I had to restore my device back to 10.3.1.1565 and now when I attempt to do a restore using the .bbb ( backup ) which I created earlier on today i.e getting the following error message:
blackberry 10 the data isn't compatible with the version of the device software that you are currently running
the software versions on my phone now and the software version when I did my backup are exactly the same 10.3.1.1565. I'm able to restore my user files and apps ect, as it offers to do a partial restore,., but my contacts, and remember files are now gone. I NEED THESE. how do I get these back..
please help..
Thanks,
GeoYeo - Free Local classifieds - Built for Blackberry 10, if you like it please Rate It and Share it!
Solved!
Go to Solution.

Hi,
I figured it out. so I figured I would post. Apparently BlackBerry pulled the 10.3.1.1565 update. anway not sure what happened butI ended up usng Shenshi and grabbing an update from a different carrier, upon doing so I am now able to do a complete restore using my old BBB file,
GeoYeo - Free Local classifieds - Built for Blackberry 10, if you like it please Rate It and Share it!

Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please

Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please .... Im using my usb as bootable device but it cant be detected..

Reboot, hold the option key down, select OSX when the startup manager appears.

Cannot view photos in the stream on iPhone 6 but can with my other 4 iOS devices

I just purchased an iPhone 6 and the setup smooth but one thing..photo stream. I can take pictures and they go in the stream and I can view from my other iOS devices but I cannot view photos taken with other devices on the iPhone 6. All use the same iCloud ID.

Hi JinnaWinkas,
Thanks for visiting Apple Support Communities.
Try these steps first if the Photo Stream on one of your PCs is not updating:
you can't connect to the Internet, iCloud Photos will not be able to send or receive updates to My Photo Stream. If necessary, troubleshoot your Internet connection on your PC, Mac, or iOS devices.
Open the iCloud Control Panel and make sure that you're signed in to the same iCloud account that you're using on your other supported devices.
In Windows 8.1, go to the Start screen, click the down arrow in the lower-left corner, then click the iCloud app.
In Windows 8, go to the Start screen, and click the iCloud tile.
In Windows 7, choose Start menu > All Programs > iCloud > iCloud.
Make sure that iCloud Photos or Photo Stream is turned on in the iCloud Control Panel. Click the Options button and make sure that My Photo Stream is turned on.
Close and reopen the iCloud Control Panel.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
You can find the article with these steps here:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Best Regards,
Jeremy

Bluetooth does not work correctly with Siemens Tek Connect headphone device

I hopefully tried the new bluetooth support in OS 3.0, but it does not work with my Siemens Tek Connect headphone device. It syncs as expected, but no sound is heard. I can choose the Tek Connect in the music app and other programs, my headphone (actually my two hearing aids, which are connected wireless with ear to ear communications (e2e) via the Tek Connect necklace device) signals the connection to me (a beep), but nothing is heard. Codec problem?
Andreas

I own Phonak hearing aids with their Bluetooth-capable iCom device which allows my aids to be used as a phone headset and also supports the A2DP stereo bluetooth profile. My iPod Touch 2Gen 32GB is able to play to my hearing aids properly.
One thing I noticed is that the iPod does not allow you to control the volume when using Bluetooth. It expects the headphones to be able to control the volume. Have you used your hearing aids as Bluetooth headphones on any other device? Maybe the device isn't programmed properly to set the volume while in headphones mode. I know my audiologist had to program the volume on each mode separately on my device.
My MacBook Pro is able to play music over Bluetooth to my hearing aids fine. But I have never gotten Windows to work properly sending audio to my hearing aids. Do you have a Mac with Bluetooth? Try to get that working to see if it's your hearing aid device that's causing the trouble or not.

Lenovo with 3G Video Call Supported

Need assistance.
I,m currently using S890 and want to upgrade to new Lenovo phone,but looking for phone with 3G video call supported and at least 2mp front camera.
Any suggestion? A805+ support 3G video call but poor front camera
Help me please!

A805+ ?!
Didn't mention your budget....The A8 A806 has a good quality-price ratio.
Cheers.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Transfer method 'TRFC with PSA' is not supported by the source system.

Hi guys
We are getting the following error when we try to open the transfer rules:
Transfer method 'TRFC with PSA' is not supported by the source system.
And when we run the load we are getting this error message:
An RFC call-up triggered the exception
Our source system check is ok. RFC test is ok from both sides.
Please advice what else can be the solution.
Edited by: sam on Nov 6, 2008 4:51 PM

Did you do Right click on Source system and 'Check' option in RSA1-> Source Systems?
Is this problem after upgrade or something like that?
-Abhijit

LMS 3.2.1 with WS-C4500X-16 (Supported Device)?

Similar Messages

Maybe you are looking for