LMS 3.2/3.1 : local/regional us windows installation prerequise

Hi,
I have installed a windows us with french local and LMS 3.1. When I try to upgrade to LMS 3.2, it failed because locals were french. I changed local to us, and now I can install LMS 3.2.
I would like to know if I can keep this installlation or do I need to reinstall the OS with regional/local us and then LMS3.2 ?
Thanks, Elisabeth

2. if I installed US OS with french local with LMS 3.1, then I change local to US is it supported or do I need to reinstal US OS with US local +
LMS ?
2. Yes, this is fine.
=> I'm sorry, what is fine, both or :
2.1 if I installed US OS with french local with LMS 3.1, then I change local to US is it supported
2.2 do I need to reinstal US OS with US local + LMS

Similar Messages

When I try to change the keyword.url settings in about:config to do a "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

I just installed Firefox 4 today. When I try to change the keyword.url settings in about:config to do a "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
See also:
* http://kb.mozillazine.org/Preferences_not_saved

I have just changed to Firefox from IE. When i pull up my home page which is the BBC.co.uk I have always to reset my local region as it always defaults to London. I didn't have this problem with IE. Can you please supply a solution, thank you

I have just changed to Firefox from IE. When i pull up my home page which is the BBC.co.uk I have always to reset my local region as it always defaults to London. I didn't have this problem with IE. Can you please supply a solution.

I fixed it!!! Following advice from similar posts, I searched the hard drive for "sessionrestore.js" in my Firefox Profiles folder (you'll need to enable viewing of hidden files in Windows Explorer (Tools > Folder Options > View (then select Hidden files option) then Apply to all folders) to do this). I then shut down Firefox, deleted the file and restarted - my home page was correct and it didn't try to open my old session! Some other posts suggested deleting everything called "sessionrestore" in that folder, but I didn't need to.

How to get the locale/region of the device?

I want to retrieve the locale/region being used on the user's mobile device (doing this on iOS at the moment) and seem to be having difficulty figuring this out.
I need to be able to distinguish between en_US, en_UK, en_CA etc.
Capabilities.language & Capabilities.languages just seem to return the language "en" and not the locale/region being used for the device.
I've also tried using
var defaultLocale:LocaleID = new LocaleID(LocalID.DEFAULT);
trace(defaultlLocale.getLanguage + "_" + defaultLocale.getRegion());
But this just results in an output of "i-default_" (invalid language setting and empty region setting).
Any ideas on what API calls I need to be using, or what I'm doing wrong?
Thanks in advance

Well it looks like if you go into the devices Settings->General->International->Language you can set the preferred language to "British English".
This will then cause Capabilities.languages to return "en-GB" for the first element of the array (the prefferred language). Not sure why it doesn't use proper locale/region codes, but that's another discussion.
The remaining issue is that there is no device setting for "Canadian English", so this doesn't completely solve my problem.
iOS devices do also let you set the "Region Format" which does have a "Canada" setting. I'm guessing that I could use this as a work around if we have access to the "Region Format" data through some AIR API. Does anyone know if we have access to the "Region Format" information on iOS devices and how we'd access that information?
Thanks.

Eventlog Forwarding Issues - Either the component that raises this event is not installed on your local computer or the installation is corrupted.....

Hello all,
OK so I do have Event Forwarding working - but I've noticed that when it's first configured I get messages similar to:
The description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The locale specific resource for the desired message is not present
If I alter the subscription (wecutil ss subname /cf:events) the forwarded events are rendered correctly.
However a product we are evaluating (which depends on event forwarding to work) always ends up with a couple of mal-rendered lines - always look something like:
Required Privs: %9
I built a standalone AD domain and joined the same 'problem' clients to this domain and re-configured Event Forwarding - there was no need to change the subscription format type to "events" and the events were forwarded correctly and also
the product we are looking at worked straight away.
It seems that when event forwarding is configured in our live domain (or any of the test labs we have) I always get the attached errors....
I've read a number of blogs that describe the issue and most recommend altering the subscription format - this however does not solve the issue entirely...
Has anyone else seen this issue and maybe found out how to resolve?
Thanks all
Carl

Yes,
I have ACS forwarder and OPSmgr Agent on Event log collector computer.
Event log collector computer shows some of the forwarded events incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"
When I change regional settings on Collector computer, event log shows all events(also previous) correctly.
Forwarded with ACS and Opsmgr Agent events
from collector computer were saved in DB correctly, even when event log show them incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"

Access windows server 2003 from a local user machine (windows 7 pro)?

Is there a way to look up user accounts from a local machine running windows 7 pro without having to always go to the physical server itself?
The reason is the location of the server, a bit of an inconvenience.
It's a windows server 2003 btw.
Thank you,
Cris

Hi,
Thank you for posting in Windows Server Forum.
Good to hear that you go it working.
In respect to your another question, it seems that you want to have with smart card technique for password without entering manual credential. Please check following article for information.
Smart Card and Remote Desktop Services
http://technet.microsoft.com/en-us/library/ff404286(v=WS.10).aspx
Guidelines for enabling smart card logon with third-party certification authorities
http://support.microsoft.com/kb/281245
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

Oracle client install in local machine having windows visa home premium

Hi,
I need to install oracle client (oracle data base is 10g) in local machine having windows vista home premium. Can anyone give me step by step instruction of how to do that asap. I will really appreciate your help.
Thanks
Valli

Oracle doesn't certify on the "home" editions of Windows, even for the client.

App Deployment Wizard defaults to UTC but Update Deployment wizard defaults to Client Local but Maintenance Windows defaults to Client Local

How hard is it to set Application deployment to Client Local by default also? We had a mishmash when UTC was use on deployment and Client Local for Maintenance Window. For consistencies sake maybe..

i did not get what do you mean by this ? are you talking about how to set the schedule time for application deployment to local instead of UTC ? if you make the schedule available at specific time,you get option to choose client Local time ,else it will
be UTC (if you select as soon as possible).
App deployment wizard ? Update deployment wizard ?
If you set the application deployment to UTC onto specific collection that has maintenance window,you must also choose the UTC (maintenance window) on collection properties.
By default the maintenance window is set to client Local Time ,unless you check UTC.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

How can you get firefox to work locally with the windows subst command?

I want to test my website locally using the windows subst command to emulate the root of my website. It works perfectly with IE8 (except IE8 displays the layout different to firefox) but will not work with Firefox. All of the images, styles sheets and anything with a root path does not work. If I use a relative path (../../ for example) to the objects they works fine.
How can I view web pages locally using a website root path?

Now I understand why Firefox does not load local pages and and IE does. I followed the link and tried all the various solutions. The noscript version did not work (but at least I have better security now) and the \\\\\ UNC path trick did nothing. Eventually I downloaded the IEtab plugin and that worked perfectly. All I wanted to do was to check webpages locally before submitting to my website and the IEtab plugin worked perfectly.
Thanks

The DFS Replication service stopped replication on the folder with the following local path: C:\Windows\SYSVOL\domain

Hi,
i am facing the problem SVSVOL folder replication, i also checked dcdiag and result is DFSRevent fail .
in event log i found the event Error:
The DFS Replication service stopped replication on the folder with the following local path: C:\Windows\SYSVOL\domain. This server has been disconnected from other partners for 173 days, which is longer than the time allowed by the MaxOfflineTimeInDays parameter
(61). DFS Replication considers the data in this folder to be stale, and this server will not replicate the folder until this error is corrected.
To resume replication of this folder, use the DFS Management snap-in to remove this server from the replication group, and then add it back to the group. This causes the server to perform an initial synchronization task, which replaces the stale data with fresh
data from other members of the replication group.
Additional Information:
Error: 9061 (The replicated folder has been offline for too long.)
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 427F62C0-0316-4DEA-B7FA-06A7D6C06A4F
Replication Group Name: Domain System Volume
Replication Group ID: CBED9B54-58D5-4081-ABD0-0C9D4EBA6027
Member ID: 67C302ED-F82A-4FC1-9A2C-62DBCC6BCA2A
please suggest me the solution..

> disconnected from other partners for 173 days, which is longer than the
> please suggest me the solution..
Increase the MaxOfflineTimeInDays. Try google or bing :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Obiee Function MONTHNAME for local region

Hi All!
I'm using OBIEE v11.1.1.5.0 on Oracle Linux 5
My example (in analytics) is this :
"Table"."Field_Date"
Values:
13/07/2012 ->(DD/MM/YYYY)
30/08/2012
11/12/2012
After applying OBIEE-Function MONTHNAME
MONTHNAME("Table"."Field_Date")
my values are:
JULY
AUGUST
DECEMBER
My problem here, is that my locale by defualt is México
(Under User Setting -> My Account > Locale: Español México
and I need my values, like this:
JULIO
AGOSTO
DICIEMBRE
I'm not using a Time-Dimension, and maybe the posible answer would be using a Case When Function.
BUT... _how to achive this only with, obiee-function MONTHNAME?_
for reference:
I also set the value es-mx in localemapping.xml and still not working.
Any help, please

Thanks for the response.
I tried looking at the generated physical SQL but it has too many aliases and gets quite complicated to understand,
Its not correctly finding the previous week.
Below is a sample output
Year     Week     Revenue         Revenue WoW
2014      52        $600                 $600
2015      1          $200                                                     <-- The first week comes up empty. This should have been 600 from 2014 wk 52
2015      2          $300                  $300
2015      3          $500                  $500

Locale variable in windows

Hi all,
Whats the substitute for locale environment variable in linux on windows?
If i want to changer tge OS locale in linux ,ido it as LC_ALL=UTF8.
HOw to do the same thing in windows?
thanks

You may check "chcp" (change Code Page) command:
http://publib.boulder.ibm.com/infocenter/wmbhelp/v6r0m0/index.jsp?topic=/com.ibm.etools.mft.eb.doc/ae19495_.htm
Some "locales" on Windows are controled by "Control Panel-->Regional and language options"
Hope this helps.
Tomasz K.

How to reset password of a local admin in window 8.1

Hi, I have a window 8.1 machine with only a local admin user. Accidentally, the user id got locked due to three incorrect attempts and not i cannot get in to the machine. To reset the password, i tried to use the password reset USB from other machine as
i cannot create from the same machine but it didn't work. I also tried to change the password through command prompt but
Please suggest how I can reset the Password or unlock the userID of the local admin user.
Thanks,
Kunal
KC

Hi,
A locked-out account cannot be used until it is reset by an administrator or until the lockout duration for the account has expired.
If you remember the password,you may type the password after the lockout duration for the account has expired.
If you forget the password,please refer to the link below:
http://windows.microsoft.com/en-us/windows/what-do-forget-windows-password#1TC=windows-8
Regards,
Kelvin hsu
TechNet Community Support

Printing chr report on local printer thru windows.

Hi
Can anybody tell me better way of printing report. Here is my requirement and setup
1. 3 tier architecture.
2. forms and reports services run of different machines
3. client is windows-xp,
4. printer is connected to local lpt1:
My requirement is to print this report in char mode on to printer.
Currently I am doing following, (it works fine) i want some better way.
1. call report with run_report_object from forms.
2. copy output file from reports server to forms server using COPY_REPORT_OBJECT_OUTPUT.
3. using webutil transfer output file to client machine
4. give print command using client_host('cmd / copy filename lpt1:');
can anybody tell me a better way than this.
rgds

You could use Reports Remote Printing Utility (orarrp). At the following link you can get more information.
http://www.oracle.com/technology/sample_code/products/reports/index.html#orarrp
It requires client install and is no supported by Oracle however
Marcos

LMS 3.2/3.1 : local/regional us windows installation prerequise

Similar Messages

Maybe you are looking for