Lms 3.2 and window server 2008 r2 standard

we have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used togetther
Could we upgrade to lms 4.0.1 ? If so, how can we do ?
thank you.
Duyen.

Correct, LMS 3.2 is not supported on Windows 2008 R2. You can upgrade to LMS 4.0 (which is supported on R2), but that is not a free upgrade from LMS 3.x. You can, however, download a free 90-day eval of LMS 4.0 from http://www.cisco.com/go/nmsevals .
It sounds like you need to contact your reseller or account manager to see what they can do. If you just purchased LMS 3.2, you may be able to get a free or discounted upgrade to 4.0.

Similar Messages

Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

LMS 3.2 and window server 2008 standard, get error when we try
Khi truy nhập vào menu chức năng:
License Server/Daemon Manager is down. Please check license.log for more information.
access licensing:
Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
Lincense.txt is file log of LMS
Must I have to active window server 2008 first ?
thank you very much ?

Hi ,
--Add the Casuser to the Administrator Group
and then reset the casuser password:
1. Go to CSCOpx\setup\support> and run the following command:
resetCasuser.exe
2. Restart the daemon manager:
Net stop crmdmgtd
Net start crmdmgtd
Let me know how it works
If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
--also screen shot of the below directory :
NMSROOT\etc\license
Thanks
Afroj

Windows Server 2008 R2 Standard "Certificate Authority Service" / Exchange Server 2010 EMC not starting and no AD connectivity for authentication.

Hello,
I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
* Note. No back ups to work with aside from whats mentioned below.
DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up.
The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
"No Exchange servers are available in any Active Directory sites. You can’t connect to remote
Powershell on a computer that only has the Management Tools role installed."
Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc per instructions only to discover I couldnt relaunch it because there was
no way how. So I copied another msc file that happened to be on the DC Server 1 back to Exchange Server 2 and got it to launch again.
Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
it is using the Certificate Authority Service.
I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
"The Trust Relationship between this workstation and primary domain failed."
I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started.
I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
Marty

I recommend that you open a ticket with Microsoft Support before you break things more.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Window SBS server 2008 and window server 2008 R2 on the same domain

Hi all,
I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
sbs server.
My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
Someone have experience can help me. I am so confuse now

Maybe this will also help to better understand the steps involved:
Transition from Small Business Server to Standard Windows Server
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Migrating away from SBS 2011
http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
The server is brand new and it's a fresh install of Apache and ColdFusion 9.
Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
On closer examination of the Windows error log, I saw the following error:
The Apache service named reported the following error: >>>
httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
Any help would be much appreciated. I have spent hours trawling the Web for solutions.

I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
OK. Simple solution to this. I'll put it here for other peoples' reference.
To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
Hope this helps someone else out.

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Compatibility forms 6i and Windows Server 2008

Hi,
We want to change our Server from 2003 to Windows Server 2008 64bits.
My question is : is there a compatibility between Oracle forms 6i (our application) and Windows Server 2008 ?
Will the migration be successfull, or will we have some bugs?
Thks for your help.
O.

YES. It worked perfectly for me, you'll have to use oracle 8/8i lite though.

T-500 and Windows Server 2008 R2 RTM

My setup:
T-500 dual booting via VHD - Windows 7 and Windows Server 2008 R2 (both 64-bit).
My problem:
I'm having a devil of a time with this one. I get random BSOD'd in my Server 2008 R2 installation, but my Win7 install is rock solid. Sometimes it's right away, sometimes after a few minutes, sometimes when trying to use WordPad. I cannot get my wireless card (Intel 5100 AGN) to work along with video drivers for my ATI card, so I'm leaning towards a driver issue. I'm trying to use the Win7 drivers for anything that's missing drivers at the moment, since they are the same under the hood, so to speak.
Has anyone else experimented with this setup and/or run into similar problems? Thanks!
T500: T9400 (2.53GHz), 4GB RAM, 160GB 7200rpm, 15.4in 1680x1050 WSXGA+ LCD, 256MB ATI Radeon HD3650, DVDRW, Intel 802.11agn wireless, AT&T WWAN, Bluetooth, Modem, 1Gb Ethernet, 9c Li-Ion, Windows 7 Ultimate x64 RC (Build 7100)

You shouldn't have any big issues, but there are a couple of gotchas that Server versions of Windows have (a notable one is the Bluetooth stack). Those are somewhat detailed in the review, though (and that blog also details how to get other features of Server 2008 R2 running).

How to install SQL server 2008 express on Windows server 2008 R2 standard OS

Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
Regds

Hello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition

Hello Team,
Is there any issue/conflicts/limitationn to install MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition.
OR their is nothing to worry about it I guess their is memory limitation between both of them. Please suggest
Regards
Naveed Amir

Hi,
Here you can find the officially Hardware and Software Requirements for SQL Server 2008 R2:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
There should be NO problem as much as I know if the basic limitation fit you (as shanky mentioned).
I had (an clients still have) several servers with Windows Server 2008 R2 Standard & SQL
Server 2008 R2 Enterprise and Standard with no problem (today I have one old developing server with this exact installations work great for several years).
[Personal Site] [Blog] [Facebook]

Cannot install WINS Server Role on Windows Server 2008 R2 Standard x64

Hi,
We are trying to install WINS Server Feature on a brand new Windows Server 2008 R2 Standard x64 (Virtual Machine). It seems that WINS is getting installed and right at the very end it gives an error 0x80070002.
We have tried rebooting the server multiple times , DNS/DHCP roles have been installed successfully as
well . It is just the WINS server feature that we are unable to install on this server.
Can someone point us to right direction. Are there any pre requisites we need to ensure before installing this feature. Are there any alternate ways to install
the WINS feature .. if yes please let us know.

The error indicates a File was not found:
C:\Users\Mark\Documents\Tools>err 0x80070002
# for hex 0x80070002 / decimal -2147024894
COR_E_FILENOTFOUND
corerror.h
# MessageText:
DIERR_NOTFOUND
dinput.h
DIERR_OBJECTNOTFOUND
dinput.h
STIERR_OBJECTNOTFOUND
stierr.h
# as an HRESULT: Severity: FAILURE (1), FACILITY_WIN32 (0x7), Code 0x2
# for hex 0x2 / decimal 2
ERROR_FILE_NOT_FOUND
winerror.h
# The system cannot find the file specified.
# 5 matches found for "0x80070002"
I would check a few things:
1) Is the OS activated (Control Panel/System)
2) Is the OS fully patched and has it been rebooted since it was patched?

A trouble free way of giving Administrators access to redirected folders on Windows Server 2008 R2 Standard?

A few months ago I set up some redirected folders on a clients Windows Small Busines Server 2008. I recall that setting up the redirected folders was straightforward, but when I edited the permissions to allow administrative access to these server located
folders, all hell broke lose. The permissions change seemed to trash the folders. I think I managed to 'bodge' it for a couple of users and got it working, but it was such a headache I didn't bother doing it for the other users.
Now, I sit in front of a brand-spanking-new Windows Server 2008 R2 Standard box which is going to be installed with a new client within 48 hours. I would like to set up redirected folders and would like to grant admin rights on these folders so I can view
their contents directly from the server.
It seems to me that there is no offical Microsoft documentation which relates specifically to doing this on Windows Server 2008. Given the amount of problems this has caused for many admins, I am astounded.
Somewhere there are articles which describe how to do it on 2003, but this procedure does not work well in 2008.
There is an SBS article that admits permissions can be trashed, but this is no help on Standard edition:
http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
I have just posted a note on this rather long article:
http://social.technet.microsoft.com/Forums/en-GB/smallbusinessserver/thread/70fa7f0e-7f2c-4f00-8401-42d262d80cd6
So, my question, hopefully to Microsoft employee, please can you document
exactly how to grant admin rights to users redirected folders on Windows Server 2008 R2 Standard, and please could you do it today :-)
In the absence of this help, then I'm afraid this is yet another great but badly implemented feature that we will not be using.
Stuart

Typical Micro$haft answer!
Quote "Hope this helps!"
NO IT DOESN'T!
Did you bother to read the original question?
Quote "So, my question, hopefully to Microsoft employee, please can you document exactly how
to grant admin rights to users redirected folders on Windows Server 2008 R2 Standard"
So, Micro$haft, Why did you give instructions to Server 2003?
... When the requester SPECIFICALLY stated: "Somewhere
there are articles which describe how to do it on 2003, but this procedure does not work well in 2008"

Windows 7 64-bit Pro not connecting to SQL Server on domain Windows Server 2008 R2 Standard

I am upgrading computers from Windows XP Professional to Windows 7 Professional but I have a problem getting one of the stock control software programs we use to connect to our SQL Windows Server 2008 R2 Standard from the new Windows 7 computers.
Our computers are connected to a domain and so is the SQL Server. The Windows XP computers allows each standard domain user to log on and connect to the SQL Server via the stock control software program.
But on the Windows 7 Pro computers standard domain users can't connect to the SQL Server but the domain administrator accounts on the same Windows 7 Pro computers can connect to the SQL Server via the stock control program.
I have setup the server alias, server name and port number via the SQL Server Client Network Utility (cliconfg.exe) so I know this isn't the problem as it works when I am logged on as domain administrator.
It seems to be something to do with domain user permissions and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that doesn't allow standard domain users to connect to an SQL Server. But I can't find anything about this and
can't workout how to fix it except to make all the users domain administrators which is obviously not a good thing to do. So basically I I think I need to create a group policy that allows the users to connect to the SQL Server but I have no experience doing
this and don't know where to begin.
Thanks for all you guys help and I hope someone can provide me with the solution to this problem.

Hi,
Was there any message?
Please run the stock control software as Administrator to check if it was caused by UAC.
If it could run as administrator, please add the standard domain user to local administrator.
Karen Hu
TechNet Community Support

Lms 3.2 and window server 2008 r2 standard

Similar Messages

Maybe you are looking for