LMS 3.2 CiscoWorks Daemon Manager does not want to startup in Windows Server 2008 64bit?

I need help concerning the CiscoWorks Daemon Manager that does not want to startup.
I keep on getting the Error 1053. I installed the CiscoWorks LMS 3.2 Evaluation.
I just need the CiscoWorks Daemon Manager started up. I know a solution was posted but the link is invalid.
This was the thread which I found:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cd47f8d/0#selected_message
Could somebody please assist me in this issue.
Thank You
Irvin

Try the below:
1. Select Control Panel -> System and Maintenance -> System.
2. On the left pane, choose Advanced system settings.
3. Under Performance section, choose Settings.
4. Click the Advanced tab.
5. Under Virtual memory section, click Change.
6. Clear the "Automatically manage paging file size for all drives" checkbox.
7. Then Click Custom and specify at least 2048 MB for the min, and at least 4095 MB for the max.
8. Confirm the services are setup correctly. In Windows, go to Start and click on 'Run...'. Type in services.msc and make sure you have the
following services set like this, change accordingly if not:
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
10. Reboot after and see if this brings daemons up.

Similar Messages

LMS 3.2 CiscoWorks Daemon Manager does not startup

When trying to start CiscoWorks Daemon Manager i get the following message:
"The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."
I have tring starting the service from DOS also and get:
E:\Program Files\CSCOpx\setup\support>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
resting the casuser pasword also did not help.
Anyone know of a solution?

Hi
That was the initial problem, we did increase the swap file space and still get an error. See the errors on the 22nd..
Dec 22 07:20:33 127.0.0.1 dmgtd: Http is the port in ssl.properties file and apacheflags to be set is -d E:\PROGRA~1\CSCOpx\MDC\Apache
Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in registry http
Dec 22 07:20:33 127.0.0.1 dmgtd: Apache Args in registry -d E:\PROGRA~1\CSCOpx\MDC\Apache
Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in md.properties file is http
Dont know if this means anything to you :-)

CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start

Dear,
After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.
From what we see this error seems to be a problem in the license.
Following is the error:
ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.
I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up
Thanks for help!

Hi,
From the attached screen shots, I can see the startup type are Incorrect for Many services ,kindly correct their status...
please see below the correct startup type
configuration for LMS Services. As you notice you see that only the
"CiscoWorks Daemon Manager" (except the RSH/Syslog/TFTP services) is set to
start automatically, the Daemon Manager is responsible for starting all the
other CiscoWorks LMS services in a specific order.
So by having the below configuration, LMS will start correctly by itself
after Windows successfully reboots. In fact having any other start up
configuration will cause LMS to not start, because if one of the LMS
services starts before it dependent services, it will not come up and all
subsequent services will fail to start as well.
CiscoWorks ANI database engine - Manual (if Campus Manager installed)
CiscoWorks Daemon Manager - Automatic
CiscoWorks RME NG database engine - Manual (if RME installed)
CiscoWorks Tomcat Servlet Engine - Manual
CiscoWorks VisiBroker Smart Agent - Manual
CiscoWorks Web Server - Manual
CWCS Cmf database engine - Manual
CWCS rsh/rcp service - Automatic
CWCS syslog service - Automatic
CWCS tftp server - Automatic
If DFM installed:
DFM dfmEpm database engine - Manual
DFM dfmFh database engine - Manual
DFM dfmInv database engine - Manual
If IPM installed:
IPM Aging Server - Automatic
IPM DB Server - Automatic
IPM Naming Server - Automatic
IPM PM Server - Automatic
IPM Stopper - Automatic
--Change the statup type Accordingly and then REBOOT the Sever and check the issue again..
Thanks
Afroj

Bluetooth Driver does not install or work on Windows Server 2008 R2

Bluetooth is the only hardware device on my T500 which is not working in Windows Server 2008 R2. Even leveraging the Bluetooth stack copied over from Win7 it is not possible to use the Broadcom BT on the PC.

Very good. According to the version number, you are on the original release of CR XI R2. This release did not support WIN 2008 Server. You will have to update the development computer to SP 6. SP 6 is here:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Recompile the app. Uninstall the runtime from the client box. Create a new deployment project using the SP 6 runtime.
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
Install the above runtime on the client computer. Run.
Oh, and keep your fingers crossed...
- Ludek

About Install Oracle Access Manager On Windows Server 2008 64bit

hi,
Question 1:
Can I install OAM10g(10.1.4.3.0) on Windows Server 2008 64bit ?
(because OAM10g all is for win32)
(I have tried to install it , but when OHS restart, have errors, so I found the 64bitOS is the trouble...)
Question 2:
If Question1 cannot, Can Oracle Identity and Access Management 11g fix it ?
Help
Thanks.

Does this server use Itanium processors ? See MOS Doc 430677.1 (The image file setup.exe is valid, but is for a machine type other than the current machine.)
Srini

Does the lnkfix_vista.zip work for window server 2008 R2 enterprise ?

All icons on my exchange 2010 server show as .lnk, any icon I click on starts notepad... does the lnkfix_vista.zip work on Windows server 2008 R2 enterprise ?
thank you.

This issue because there is no SPN for the Front End pool FQDN. Rather than adding an SPN I just deleted my front end server from the topology builder and added a new one using the FQDN of the actual lync server and it worked fine.
Also you can refer below link
http://howexchangeworks.com/2013/07/creating-central-management-store-fails-while-publishing-lync-2013-topology.html
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

DW CS5 does not want to accept only local server

Hi there.
DW CS5, PHP & mySQL.
I want to set up a site on my localhost, but DW does not want to accept a localhost only? It makes an orange star next to "Servers" in the site setup.
Am I doing something wrong? Please advise.
Regards,
Deon

Sorry, forgot to mention: Windows 7 and I have EasyPHP http://www.easyphp.org which is loading PHP and mySql for me.
Regards,
Deon

Does XI 3.1 SP2 support Windows Server 2008 Release 2?

In the supported platforms guide for Business Objects XI 3.1 SP2 it lists support for Windows Server 2008 but I'm curious if it will support 2008 Release 2???

2012 R2 is not mentioned (that article is over two years old),
Would be kinda hard to mention a non-existent operating system in a 2 year old blog post, eh?
Maybe the Blog entry could be updated?
There's no need to update the blog post once you understand the specifics of the update. The update introduces NEW functionality required for ALL operating systems from Windows 8 forward.
Also, maybe you shouldn't be so literal in your search efforts? :-) Think outside the box a bit, eh? Understand *why* the update was created. What does the update do that makes WSUS v3 work for Win8/WS2012. Is there some reason that wouldn't work for subsequent
operating systems? You didn't have the update anyway, did it never cross your mind.. "Hey.. maybe I should do this... anyway?"
Nevermind the hundreds of conversations in this forum about KB2734608 and the dozens of times Win8.1 or WS2012R2 is mentioned in those conversations.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Macs will not show up on DNS Windows Server 2008 R2

In our office, we have a Windows Server Infrastructure with several Macs (Imacs, mac pros, macbook airs etc).
Active Directory and DNS is running off a Windows Server 2008 R2 Server, with DHCP on a Cisco Router.
DHCP is configured to direct all DNS entries to the Windows DNS Server.
The problem that I'm having is that, while all windows machines show up on the Windows DNS Server, None of the Macs are registered. Macs are able to utilize the DNS Server correctly, but will not register on the DNS Listings.
Because I cannot access or ping Macs via their hostname, I cannot tell our third party backup software to point to a particular machine. Our workstations are all DHCP enabled, and since assigning a static ip to all the Macs here is not an option, I need to get this working, so that I can get our macs backing up.
I've followed a few similar articles, but they appear to be for older 2003 servers, which the 2008 R2 servers do not have those options. I do not want to join the Macs onto the windows domain, I merely want to get them registered on our DNS server.
The mac operating systems vary between Snow Leopard to Mountain Lion
https://discussions.apple.com/thread/1421684?start=0&tstart=0 <--- Article I was following
Thanks,
Rboelens

I'm pretty sure that the DNS registration stuff is part of the Active Directory plug-in on OS X. I'd recommend you give it a try.
GPOs are not enforced on the Macs if they're bound to Active Directory, _unless_ you've extended the Active Directory schema (which is a lot of work). The main benefits to joining Macs to AD ar:
* Centralized password management and policies (as you've defined in AD).
* Single sign-on to various kerberized resources (i.e. Windows share points and internal web pages if you're using IIS and you use Kerberos to secure them, rather than NTLM).
Here's an Apple white paper which may help. I would recommend you read this carefully and then decide whether or not you want to bind the Macs to AD. I'd also recommend you test with a bound Mac to see if resolves this "host name in DNS" issue... I suspect it will.
http://training.apple.com/pdf/wp_integrating_active_directory_ml.pdf

What does "NetworkInterface getDisplayName()" refer to in windows server 2008 ?

Hi experts,
I want to know what file "NetworkInterface getDisplayName()" refer to in Windows Server 2008 when running java program.
Device Manager doesn't show all network interface like "RAS Async Adapter".
I run the following program.
===========Program================
import java.util.*;
import java.net.NetworkInterface;
import java.net.SocketException;
public class TEST1 {
public static void main(String[] args) throws SocketException {
// TODO Auto-generated method stub
for (Enumeration<NetworkInterface> interfaces = NetworkInterface.getNetworkInterfaces(); interfaces.hasMoreElements();) {
final NetworkInterface networkInterface = interfaces.nextElement();
final String displayName = networkInterface.getDisplayName();
final String name = networkInterface.getName();
System.out.println("-[DisplayName]:" + displayName+" [Name]:"+name);
==========Result===================
-[DisplayName]:Software Loopback Interface 1 [Name]:lo
-[DisplayName]:WAN Miniport (SSTP) [Name]:net0
-[DisplayName]:WAN Miniport (IKEv2) [Name]:net1
-[DisplayName]:WAN Miniport (L2TP) [Name]:net2
-[DisplayName]:WAN Miniport (PPTP) [Name]:net3
-[DisplayName]:WAN Miniport (PPPOE) [Name]:ppp0
-[DisplayName]:WAN Miniport (IPv6) [Name]:eth0
-[DisplayName]:WAN Miniport (Network Monitor) [Name]:eth1
-[DisplayName]:WAN Miniport (IP) [Name]:eth2
-[DisplayName]:RAS Async Adapter [Name]:ppp1
-[DisplayName]:Intel(R) PRO/1000 MT Network Connection [Name]:eth3
-[DisplayName]:Microsoft ISATAP Adapter [Name]:net4
-[DisplayName]:Teredo Tunneling Pseudo-Interface [Name]:net5
-[DisplayName]:Microsoft Loopback Adapter [Name]:eth4
-[DisplayName]:Microsoft ISATAP Adapter #2 [Name]:net6
-[DisplayName]:Intel(R) PRO/1000 MT Network Connection-QoS Packet Scheduler-0000 [Name]:eth5
-[DisplayName]:Intel(R) PRO/1000 MT Network Connection-WFP LightWeight Filter-0000 [Name]:eth6
-[DisplayName]:Microsoft Loopback Adapter-QoS Packet Scheduler-0000 [Name]:eth7
-[DisplayName]:Microsoft Loopback Adapter-WFP LightWeight Filter-0000 [Name]:eth8
-[DisplayName]:WAN Miniport (IPv6)-QoS Packet Scheduler-0000 [Name]:eth9
-[DisplayName]:WAN Miniport (IP)-QoS Packet Scheduler-0000 [Name]:eth10
-[DisplayName]:WAN Miniport (Network Monitor)-QoS Packet Scheduler-0000 [Name]:eth11
Best regards,
Keita

I'm not asking what there devices are.
I would like to know what file Java read information from in Windows OS.
Registry ? or other file ?

Does LabVIEW DSC 8.5 support Windows Server 2008?

Hi,
I am developing a SCADA system using LabVIEW DSC 8.5. Apparently, customer wants the Server Computer to be latest Windows Server 2008 operating System.
But the Release and Upgrade note specify that DSC Module does not support Windows NT/Me/98/95/Server 2003. (System Requirement section)
Does it support Windows server 2008?
Any feedback most appreciated.
Message Edited by Vsh on 09-28-2009 08:56 AM

Hi Vsh
Sadly no version of LabVIEW (and therefor no modules like DSC either) officially supports Server 2008. That has however not stopped people from trying and I've seen both cases were it has worked fine and cases were it has not worked. This thread might be of interest to you.
Best Regards
David
NISW

32bit windows client PC not able to print from TS server 2008 64bit

I had a HP M1216NFH printer install at branch office. The branch user will need to remote connect to Terminal Server to access the stock program and print the order back to M1216NFH printer. But none of the branch user are able to print remotely.
The Terminal Server is running on Windows Server 2008 R2 Standard 64bit version, and all the branch users are using 32bit Windows 7 and XP version. The printer redirection is created during remote session, and user is able to select the printer to print, but is nothing come out from the printer.
I had install x86 printer driver, but is still not working. Server is auto using remote desktop easy print driver when printer redirection in remote session.
I did try connect branch user PC to another Terminal Server running on WIndows Server 2003 R2 Standard 32bit version, and tested is no problem to print.
Can anyone guide me what is the step that i was miss out for Windows Server 64bit configuration in order to allow 32bit windows client to print?
Thank you.

I believe the only way to print client side from a web app would be to use the ActiveX print control off of the viewer (disregarding the ugly way of using the browsers print button).
If there is another way I am sure someone will correct me

LMS 4.2.2 Fault manager does not resolve hostname for some devices

This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server.
The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.

The problem may occur if the lookup was not possible when the device was added to fault management.
Faultmanager, unlike the rest of LMS, does not update the display name.
If the resolver.pl in /opt/CSCOpx/bin is able to get the device name, then resolution is fine.
The only workarrounds are to the delete the device from LMS and re-add it, or use cli tools on the server to remove and re-add the device from the DFM repository.
Cheers,
Michel

ITunes 12.1.1.4 still does not synchronize with Outlook! (Windows 7 Enterprise 64bit)

iPhone 4S, iPhone 5S, iPad Air, iOS 8.3 on all of them: since I 'upgraded' to iTunes 12, none of them can see any longer my Outlook and its calendars!

The "for older video cards" installer should address issues in Outlook integration with the full 64-bit version of iTunes - see iTunes 12.1.2 for Windows (64-bit — for older video cards)

TCP Window sizing not working as expected for Windows server 2008 R2 SP1

Hi ,
TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
Please help.
Thanks,
Pro1962

Hi,
I think window auto-tuning is enabled.
You can disable it by running the following commend.
netsh interface tcp set global autotuninglevel=disabled
Hope this helps.

LMS 3.2 CiscoWorks Daemon Manager does not want to startup in Windows Server 2008 64bit?

Similar Messages

Maybe you are looking for