LMS 3.2 Data Collection Issue

Hi ,
I have LMS 3.2 and license for adding 5000 devices , my data collection is running continously for the past 2 days, when i try to stop the daemon manager and restart it comes to idle state but after some time it again goes to Running state
I am not getting the best practices deviations and discrepaqncies report after this issue
I am attaching the ANIServer.properties , ani.log and ANIServer.log file
Please help

this seems to be BugID CSCtd49439:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtd49439
also consider to install the patch for BugID CSCtg20882:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtg20882
if you have CM 5.2 you should consider to upgrade to CM 5.2.1 which is available here:
http://www.cisco.com/cisco/software/type.html?mdfid=282641773&flowid=5141&softwareid=280775108
the patches for BugIDs CSCtd49439 and CSCtg20882 are availabel by contacting TAC

Similar Messages

LMS 4.2 Topology Data Collection Issue

Hi there,
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
Topology Data Collection    193    0    Not Available     Running    Schedule
Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
Thanks for help.

Hi,
i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
Everything is set to 0:
Topology Data Collection      0 0 Not Available                          Running Schedule
UT Major Acquisition            0 (0 End hosts 0 IP Phones) 0      Not Available Idle Schedule
VRF Collection                    0 0                                              Not Available Idle Schedule
But Topology Data Collection is still frozen to "Running" state....

Performance Report Manager Data Collection Issues

I have an agent running and collecting data in a circular file.... history.log
Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
If you can provide any information as to what to look for, please reply.

history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
Regards,
Mike
[email protected]

BCS - Data collection issue

Hi,
I'm using BCS 4.0. I'm working now in final testing and I have some question regarding to the data collection process using load from data stream method. I ran the task in consolidation monitor for 007.2007 period and for all companies without any error or warnings, but we have differences in financial information for that period.
I reviewed the content in my BCS cube (RSA1) and we don't have any data for that accounts, the only thing that I found was that all docs were created on same date
I deleted the ID request in RSA1in my BCS cube and I executed task again in consolidation monitor, but the result was the same.
Looking at log / source data, in the rows listed, these data is not taking from the infoprovider
Any idea which could be the problem ?
Thanks
Nayeli

Hi Nayeli,
I had to do this kind of job (reconciliation of data in the source basis cube and the totals cube) during the final testing a lot of times, with an accountant.
The only way to have the first clue what is happening is to compare every particular amount s in both cubes. Comparing and trying to figure out any dependencies in data.
The difference might arise because of ANY reason. Only you may analyze the data and decide what to do.
AFAIU, you compared only reported data and did no currency translation and eliminations?
Then, I'm afraid that you've made a very big mistake deleting the request from the totals cube. You have broken the consistency between totals and document data. For a transactional cube the request is yellow until the number of records in it reach 50000 records. Then it is closed and become green. As you may understand, in those 50000 records maybe contained a lot of data for different posting periods, for example, reported data for the previous closed period. Though, documents still contain eliminations for that period. - Inconsistency.

Ciscoworks LMS 2.6 data collection has stopped

data collection stopped on the 13th of October after investigation the event logs are showing the following system errors

Please gather the server info and send it:
Please follow these steps:
Open VMS via WEB-browser
Go to Server Configuration
Go to Diagnostics
Go to Collect Server Info
Click on Create
Select All filed
Click on finish and this will generate the report
Save the file created file

Ciscoworks LMS 4.1 Inventory Collection issue

We are having an issue with device inventory collection when a device or component in a device is replaced. The inventory collection job appears to be successful but the changes to devices or modules are not retreived. Short of deleting an object and adding back in, are there any configuration changes that can be made or patches that can be applied to LMS to pick up these inventory changes?

Yes, deleting and re-adding the device works. However, changes have been made to multiple devices in the environment and aside from a bulk delete and re-add there is no guarantee that all changes to all devices will be identified and captured. the side effect will be a loss of historical data.
Are there any options other that deleting and re-adding that will allow the application to identify the inventory changes, or is this a limitation of the product?
Are there any items we should check to identify a potential underlying issue?

Interactive PDF created in CS6 InDesign data collection issue

Created an interactive form from within CS6 InDesign. Uses text fields and check boxes with a submit button to forward the completed form to an email address. When tested in Acrobat Reader, the collected information will not be submitted, just a copy of the form -- blank. Any obvious solutions to this, perhaps a step I missed when creating in InDesign?
Also, my submit button creates an email to send with form completed data input, and attachements too, can then be included. Is there a way to bypass the attachements step for the email and simply have an Include (browse) for attachements while within the interactive PDF?

Which version of Adobe Reader are you using for testing purposes? Adobe Reader XI introduced the ability to save filled out PDF forms and submit them. For earlier versions as far as I'm aware you'd need to create a Reader Extended PDF, which is something you can do in Acrobat, not InDesign.
If you have Adobe Acrobat:
Open the PDF form you created in InDesign then
File > Save as Other > Reader Extended PDF > Enable More Tools... and test it in Adobe Reader again.
To answer your second question, not that I know... (neither in InDesign or Acrobat).
However, if you have a copy of Adobe LivecycleDesigner, you can add a form object that can be used by users to include attachments.
Cari

Performance data collection issue

Hi,
We are using SCOM 2007 r2.We have some servers not collecting performance data.These servers are up and running fine and generating alerts (Monitoring Working fine). Can any one please suggest us what is the work arround for this.
Thanks&Regards,
Padmaja M.

Try to clear management server health service cache by stopping the system center management service, renaming the health service state folder and starting the service.
Juke Chou
TechNet Community Support

LMS 4.2 - Config collection issue

After launching config collection job in LMS 4.2 I can't get job results and receive error message - Unable to get results of job execution for device...
I've increased the job result wait time using option in Admin > Collection Settings ... , but nothing changed.
Here are screenshots of error message and wait settings I used:
Thanks in advance!

i have seen this with SNMP timeout needed to be increased.
please try to increase those values, and not the job completion values.
I just saw in CP LMS 4.2 that the values are assembled on a new page.
all of them ...
Admin > Network > Timeout and Retry Settings > Inventory/Config Timeout and Retry Settings
also in the navigator of the same last windows your screenshot is from try the device specific timeouts:
Admin > Collection Settings > Config > Edit the Inventory/Config Timeout and Retry Settings
HTH

BI7 Admin Cockpit Data Collection Issue

Hi,
We are in BI7 SP15.
When I run my Z query & run Query Runtime Statistics - Delta process chain i don't see any statistics data in 0TCT_C02. I activated all required objects. But if i run query in 0TCT_MC02 & run delta load i see the records in 0TCT_C02.
I verified 'Tools - BW Statistics for Infoproviders' both 0TCT_C02 and my Zcube (also both quries) has same setting. Am i missing any steps?
Thanks
Ramesh

Thanks for the reply.
After running the delta process chain i can see only the stat data for query from 0TCT_MC21 not for my Zcube. I ran query against my Zcube but i could not see any stat records related to my Zcube queries.
I set RSA1 - Tools - Statistics for InfoProviders for my Zcube to X & 2.
Any help is appreciated.
Thanks
Ramesh

Data collection failing

LMS 4.1 W2k8 R2
I recently installed 17 stacks of 3560V2 switches at a site and added them to LMS4.1. What I have found is that data collection is failing for all but the top switch in the stack. In other workds, in some cabinets I may have 4 switches connected back to a 6500 core. Data collection succeeds for only the switch connected to the core. UT info is not collected for the switches that fail data collection.
If I go to the device status dashboard I see that I have data collection succeeding for 56 devices and failing for 96 devices. For the devices that fail some are listed as unreachable and others as never-reachable. In either case, the following is suggested as a resolution:
Verify the following :
1. Device is reachable using ping.
2. Verify that DCR is configured with correct credentials for the device.
These devices are reachable. Inventory collection is succeeding. If I test reachability in device center I get successes across the board - even for SSH, though no username is specified in DCR so I can't see how that works.
The 17 stacks I just installed are configured as clusters in those cabinets that have more than 1 switch. However, they are not managed as clusters by LMS. They all have IP addresses. I just use clustering to facilitate bouncing around a stack from a telnet command line.
I deleted one of these switches and re-added. Now ping, HTTP, SSHv1 & v2 succeed in device center - but everything else fails. When I run a credential verification job on this switch it reports SNMP read and write success, telnet & enable success, and SSH "no value to test". The credential verification results are as I would expect.
I am at a loss at this point. How do I troubleshoot the data collection issue?
-Jeff

I found the answer to my particular problem here:
Campus Manager and cluster-member switches

Problems with Data collection in CM 5.0.6

Hello:
I have installed LMS 3.0.1 and CM 5.0.6, and I have some problems with CM:
-Although data collection is scheduled, this does not run.
I try to launch it from CM menu, it asks if I want the collection of all devices or the new ones.
I try the two options but it does not do anything.
-I can launch the UT acquisition but it does not collect all the hosts.
I compare the configuration of the devices that "works" and the others and dont see no difference.
-The UT acquisition does not discover our Ip phones.
-In data collection settings there are 5 devices that are included but not managed.
-When I restart the server the data collection works fine, but the next day it doesn't work.
Thanks!!!

Hi,
As suspected, Campus Manager 5.0.6 hitting a bug as found the following exception in ani.log :-
2011/03/14 15:05:40 Discovery ani ERROR AniTimeLine: TimeBase Discovery caught exception: java.lang.NullPointerException
java.lang.NullPointerException
    at com.objectspace.jgl.HashMap.put(HashMap.java)
    at com.cisco.nm.ani.server.core.PortDetailsXml.populatePortData(PortDetailsXml.java:109)
    at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.generatePortDetailsXml(DiscoveryTimeBaseImpl.java:104)
    at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.postPerformScheduledFunction(DiscoveryTimeBaseImpl.java:81)
    at com.cisco.nm.ani.server.frontend.AniTimeBaseImpl.execute(AniTimeBaseImpl.java:48)
    at com.cisco.nm.ani.server.frontend.AniTimeLine.executeTimeBase(AniTimeLine.java:317)
    at com.cisco.nm.ani.server.frontend.AniTimeLine.runSchedule(AniTimeLine.java:350)
    at com.cisco.nm.ani.server.frontend.AniTimeLine.run(AniTimeLine.java:366)
    at java.lang.Thread.run(Thread.java:595)
BUG ID = CSCtd49439
link to view bug at Cisco.com
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd49439
You need to contact TAC for the patch.Kindly click on Action --> open Service Request and it will put all these notes and logs of this thread to the TAC case.
Once the data collection issue will be fixed and the correct number of devices being data collected properly, then you need to make sure to add "Call Manager" to Common Services with the community string credentials and run the data collection and UT Acquisitions to get the IP Phones discovered.
Thanks,
Gaganjeet

Data Collection

Hi Experts,
I am facing issue in Data collection Error in Decentralized environment.
Earlier Data collection (Standard collection) was working normal but recently I am facing the below issue.
If I launch Standard collection, it is getting Error out. Log file message (in Data pull Program) is Staging Tables' data is not collected. Please submit the request Planning ODS Load.
For resolving the above, I tried the below two methods.
1. 1st launch Planning data collection - purging staging tables then Launching Standard collection, but it is also fails with error in the program "APS Collections Miscellaneous Task". Error message : FDPSTP failed due to ORA-06512: at "APPS.MSC_UTIL", line 1192.
2. launch Planning data collection - purging staging table, Data pull (manual launch) then Planning ODS load (manual launch). Same error message
But, I am getting negative result.
Hence, what is the missing setup. Is this need any profile option. or How to solve this.
Appreciating your earlier answer.
Regards,
Ramesh

Hi
Package is Valid (I used the said query "select object_name, object_type, status from all_objects where object_name = 'MSC_UTIL'")
Data collection issue is not resolving. Below are my tryings
Try 1:
1. I launched "Planning Data Collection - Purge Staging Tables" with validation = No (Later I tried with Validation = Yes also) then
2. I launched Standard Collection (as standard way)
Result:
Planning ODS Load getting Error out, log file showing below error
Exceptions posted by this request
Concurrent Request for "Planning ODS Load" has completed with Error.
Try 2:
1. I launched "Planning Data Collection - Purge Staging Tables" with validation = No (Later I tried with Validation = Yes also) then
2. I launched "Planning Data Pull" manually (Completed Normal) then
3. I launched "Planning ODS Load" manually
Result:
Planning ODS Load Error out because of below
I am getting below error message in the concurrent program "Generate Trading Partner Keys" log file.
**Starts**27-FEB-2011 16:20:16
ORACLE error 6512 in FDPSTP
Cause: FDPSTP failed due to ORA-06512: at "APPS.MSC_CL_SETUP_ODS_LOAD", line 5094
ORA-06512: at "APPS.MSC_CL_COLLECTION", line 6862
ORA-06512: at line 1
Appreciating your earlier reply
Regards,
Ramesh
.

Problem Topology Data collection LMS 4.1

Hi there,
I have an issue with the lms 4.1 Topology Data Collection. In the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary, there are only 2 devices succeeded and 0 device fail. but I have more 500 device in state managed. I run Inventory Collections but the number doesn't change.
Inventory Collection          534                13 02 May 2012, 11:07 CEST Idle          Schedule
Config Archive                         507               14 02 May 2012, 09:51 CEST Running          Schedule
Topology Data Collection               2               0 02 May 2012, 11:11 CEST Idle          Schedule
I have read others discussions but no one has the same problem or similar problem. The only possible solution is to reset the ANI db but I'm not sure if it it's the best solution.
Any ideas?
Thaks for help

I confirm that Martin. Good spotting!. I just noticed it in a server I installed yesterday. These 2 lines were added to the hosts file.
127.0.0.1       localhost
127.0.0.1   LMS4
A bit silly for both, since these entries were allready in the hosts file, done by the windows install I think
127.0.0.1       localhost
::1             localhost
Cheers,
Michel

Data collection problems in LMS 4.0

Hi, we have some devices in our LMS 4.0 where Data Collection cannot be collected. The strange thing is that some days ago they were working fine and we have SNMP connectivity. We have deleted the devices and have added them again but the problem still persists, how can we fix it?

From the LMS server do the following:
1. ping the devices that you cannot collect their data
2. test the snmp connection to those devices using snmpwalk
go to CSCOpx\objects\jt\bin
snmpwalk -v 2c -c 1.3.6.1.2.1.1.2
3. test the credintials against those devices (Inventory> Job Browsers> Device Credentials Verification)
For any failure in 1 or 2 usually this is a firewall problem. Check if snmp and icmp ports are open or not.
For 3 failue check the credintials from (Inventory> Device Administration> Add / Import / Manage Devices)
I hope this help

LMS 3.2 Data Collection Issue

Similar Messages

Maybe you are looking for