LMS 3.2 Deamon manager doesn't start

Hi,
I am getting a problem while starting the deamon manager while i disable the ssl and when am trying to restart the deamon manager.
any idea hoe to resilve this??
Regards,
Channa

guys..any help??

Similar Messages

After installing lms 3.2 Deamon manager couldnt start

Hi All
I'm installing LMS 3.2 trial version on Windows 2008. I could not start
CiscoWorks Deamon Manager services. (I'm getting the error 1053: The service
did not response to the start or control request in a timely fashion)
I s this due to the trial version or the OS problem?
Regards
mashraf

See https://supportforums.cisco.com/message/675893#675893 .

CW LMS 2.5 deamon manager not starting win2000

For some reason the deamon manager service on this server refuses to start. Here is what I
see when trying to start:
error 1053. The service did not respond to the start or control request in a timely fashion.
I tried to reboot the server, no luck. tried different accounts to log on service, no luck. any ideas?

What kind of link connects the 6509? Is it appearing in topo services at all?
If you poll the CISCO-CDP-MIB on the 3750's is it showing data correctly? Are these switches stacked?
You might want to do another discovery with debug enabled to see what is happening for both.

Enterpirse manager doesn't start

Hi all
When I try to start the Enterprise manager through the "start \ run \ emctl start dbconsole" option nothing happens.
For a brief moment a dosbox appears, and that's it.
Am I missing part of the installation or is there something else I need to look into?
Hope somebody knows what to do
Thanks in advance
Hein
PS
Maybe you need more information, if so, please let me know

Hallo, Mr ? Forstmann
Thanks for your reply
I am afraid that I am trying to do something that is out of my league
In the link you have added is mentioned that in directory $ORACLE_HOME\... I can find the portnumber
I have searched all directories for this dir but can't find it. I have also looked for the dirs oracle_ base and Oracle_sid, but they are also absent.
Does this mean I have an incomplete installation or am I just missing the skills to work with Oracle?
Hein
PS
I have Oracle installed on a computer that has no connection to the internet

Job Manager doesn't start

I installed Oracle BI EE 10.1.3.2 and used Job Manager to configure the Scheduler for Delivers. I had no problem with that, but later I tried to change the configuration and the Job Manager wouldn't start. When it's executed it just does nothing.
I couldn't find any logs that said what the problem is, and I don't know in which archives it stores the configuration. Does anyone knows about this files or have any idea what the problem may be?
thanks in advance
Ale

I installed Oracle BI EE 10.1.3.2 and used Job Manager to configure the Scheduler for Delivers. I had no problem with that, but later I tried to change the configuration and the Job Manager wouldn't start. When it's executed it just does nothing.
I couldn't find any logs that said what the problem is, and I don't know in which archives it stores the configuration. Does anyone knows about this files or have any idea what the problem may be?
thanks in advance
Ale

Sun Container Manager doesn't start

Hello !!
I have some problem with Sun management center 4.0
After install, I try to use Sun Container.
Impossible...
After looking in the log I found this message :
Start scripts for the following addons were not present:
Solaris Container Manager
But the application is installed and the database also .
Somebody have an idea about the problem ?
Thanks

Hello !!
I have some problem with Sun management center 4.0
After install, I try to use Sun Container.
Impossible...
After looking in the log I found this message :
Start scripts for the following addons were not present:
Solaris Container Manager
But the application is installed and the database also .
Somebody have an idea about the problem ?
Thanks

NWA or User Management doesn't start

Hello, All !!
I have recently installed a NW 7.0 system. Details listed below:
System: SAP SRM 5.0 SR3
Stacks: ABAP+JAVA - single install
Platform: HP-UX (64-bit)
Database: Oracle
Issue / Problem that's on hand
I am not able to bring up User Management or NWA from the URL:
<http>://<AS_Java_hostname>:<AS_Java_HTTP_port>/nwa
<http>://<AS_Java_hostname>:<AS_Java_HTTP_port>/useradmin
User ID: J2EE_ADMIN
Password: Installation Master Password
Once I enter these details and click on login button, I get back the same blank login screen. If I enter incorrect password, then I get an error: "User Authentication failed".
When I log on to AS ABAP, I see the following users defined:
J2EE_ADMIN
J2EE_GUEST
SAPJSF.
In the config tool, the guest user is specified as J2EE_GUEST (property ume.login.guest_user.uniqueids).
=======================================================================
Here are related excerpts from the installation guide
As of SAP NetWeaver 7.0 and Business Suite 2005, you can install an ABAP+Java system in one installation run. This means that AS Java is configured by default against ABAP client 001.
You can choose one of the following methods to set up your new production client:
n You install the ABAP and the Java part of your system separately.
n You install an ABAP+Java system and reconnect the Java part.
n You install an ABAP+Java system and do not reconnect the Java part.
Bonjour!! (Most frequently used word from my French vocabulary (FV)!! BTW - my FV has very few words.)
Hope everyone's doing fine. I have been bothering a few on the team with my questions and have been receiving prompt reply. And here's yet another question I need some advise on.
Excerpts from the installation guide:
As of SAP NetWeaver 7.0 and Business Suite 2005, you can install an ABAP+Java system in one installation run. This means that AS Java is configured by default against ABAP client 001.
You can choose one of the following methods to set up your new production client:
n You install the ABAP and the Java part of your system separately.
n You install an ABAP+Java system and reconnect the Java part.
n You install an ABAP+Java system and do not reconnect the Java part.
Installing an ABAP+Java System and Reconnecting the Java Part
If you need the Java users in your ABAP production client, you have to manually configure the connection of the Java part to the ABAP part.For more information about Java users, see the table User Management Engine (UME) in Basic SAP System Parameters [page 28].
1. You install the ABAP+Java system as described in this documentation.
2. You perform the client copy [page 144].
3. You reconnect the Java part to the production client as described in SAP Note 937323.
=======================================================================
Eventually, I want to change the client in AS JAVA to point to production client and not client 001. But right now, I am not even able to bring up NWA or User Management. But I can bring up "System Information" - logging in as J2EE_ADMIN user.
Please let me what needs to be done to correct this problem.
Thanks in advance!!
Madhavi

Hi,
Login into your 001 client and check whether your j2ee_admin or j2ee_guest are locked? If yes then unlock them and try again.
Also if you want to change the password then make sure you update the pasword in the secure storage area of web as java through configtool.
Regards,
Vamshi.

Oracle Process Manager doesn't start anymore - orageneric11.dll

Hi,
we have an OPMN installed as standalone for containing Oracle Data Integrator 11 agent. All was fine until a technical maintenance that reinstalled the antivirus and some other stuff.
Now when i try to start OPMN service it fails and in the event log i see a "orageneric11.dll no found, try reinstalling the software".
Have you got any idea about what happened?
Thanks in advance

Just reinstalled sw

Node manager service not starting

Hi
I am doing a uccx setup with cucm in VM ware.
I am not able to open the appadmin page and when i triy to do so the node manger service get stopped .
from the mvir loggs in "c:\program files\wfavvid\logs\mivr " i cann't see anything.
what can be the possibility for this.
Appreciate your quicj response.
Thanks

You're not providing much to work with here.
What version of UCCX are you working with? What version of Callmanager? Have you confirmed that your services are running on CallManager (like the callmanager service, CTI Manager, AXL service, etc.)? Those services sometimes don't start properly if your VM's are on underpowered hosts. Check them.
If the node manager doesn't start, usually, it tries to reboot the UCCX server. Is that happening? What errors are you seeing in the event logs? Are your services working and processing scripts?
Is this a new install, or was it working and just broke?
Tell us more. We can't see what's going on over there.
Cliff

Firefox doesn't start

it crashed during an update
tried re-installing
tried uninstalling and re-installing
tried creating new profile, profile manager doesn't start
uses 50k memory and 50% of CPU power

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Browser_will_not_start_up

Print Manager not automatically starting in OES11

Hi,
I have had to recreate the print manager with a different name. Now when I restart the server the print manager doesn't start up automatically. Is there a file I need to edit to get this to start. We are using OES11SP1.
I can manually start the print manager fine in imanager.
Cheers

Cheers that was the issue.
Originally Posted by ckazzi
Hi,
I have had to recreate the print manager with a different name. Now when I restart the server the print manager doesn't start up automatically. Is there a file I need to edit to get this to start. We are using OES11SP1.
I can manually start the print manager fine in imanager.
Cheers

Cisco Works LMS 4.0 doesn´t start

Hello All
i have big trouble with me LMS 4.0 installation. I did an Upgrade from LMS 3.2 to LMS 4.0. After that the Works was running without any problems. After some days i´d tried to login on the LMS and it told me something like my lincens where corrupt or so. I´d tried to start the CiscoWorks Demon Manger but he didn´t start. OK after some investigation at the i-net i decided to perform a clean installation of the Server an Cisco Works.
So after i do thes i´d perform a restore of my old Data from LMS 3.2. Now i investicated that my ANI Server Falied to start. OK than i tried to restart the Works Demon ... f... and what will happend ?!?!?! The demon doesn´t start. Can someone help me ?!?! Please i will not perform a new istallation again.
C:\Windows\system32>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Thanks
Mario
Hi i have an update for this issues ... After i´d tried to start all Works- Services be hand ... all Services will start execpt the deamon ... When i loged in i get messages "License Server/Deamon Manager is down. Please check license.log for more information."
Thats the same situtaion befor the new installation.

Hi Afroj
i´d just have an update for you and maybe for Martin. I´d checked the services and investigate that the ANIDatabase Engine
was not stoped. After i stoped the service "by Hand". I tried to reinalize the Database and see ... IT WORKS ...
D:\CiscoWorks\CSCOpx\bin>perl.exe dbRestoreOrig.pl dsn=ani dmprefix=ANI
WARNING: Existing contents of ani database will be lost.
Do you want to continue [y/n]?y
INFO: Starting the DataBase
    Starting database engine aniEng
INFO: Process created
INFO: Started the Database engine : aniEng Retry 0
INFO: Started the Database engine : aniEng Retry 1
INFO: Started the Database engine : aniEng Retry 2
INFO: Started the Database engine : aniEng Retry 3
INFO: Started the Database engine : aniEng Retry 4
INFO: Started the Database engine : aniEng Retry 5
INFO: Started the Database engine : aniEng Retry 6
INFO: Started the Database engine : aniEng Retry 7
INFO: Started the Database engine : aniEng Retry 8
INFO: Started the Database engine : aniEng Retry 9
INFO: Getting message
INFO: Connect the database dsn=ani
INFO: Connected the Database
INFO: Command Executed
INFO: Connecting the Database ani
INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4f
e3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
INFO: Preparing AUTH cmd
INFO: AUTH Executed
INFO: AUTH cmd finished
INFO: Stopping the Database engine ani
    Stopping database engine aniEng
INFO: File not exists.SQL Anywhere Command File Hiding Utility Version 10.0.1.40
51
INFO: Database [ani] authenticated successfully.
ani database initialization is completed.
D:\CiscoWorks\CSCOpx\bin>
D:\CiscoWorks\CSCOpx\bin>pdshow ANIServer
        Process= ANIServer
        State = Running with busy flag set
        Pid    = 11136
        RC     = 0
        Signo = 0
        Start = 8/22/2011 1:01:29 PM
        Stop   = Not applicable
        Core   = Not applicable
        Info   = ANIServer started.
Many Thanks for your help ...
Regards
Mario

Remote Update Manager on Yosemite doesn't start

Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
In the console, I see these lines:
Any suggestions?
Many thanks

Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

When i double-click the mozilla icon, it doesn't start. In the task manager i noted that the process "firefox.exe" appears and desappear after 5 seconds. The problem remains in mozilla safe-mode, but not in windows safe-mode. Thks!

Yesterday i installed the firefox 6.0 on my windows 7 computer. When i double-click the mozilla icon, it doesn't start. I opened the task manager and noted that the process "firefox.exe" appears and desappear after 5 seconds. I tried to start mozilla in safe mode but the problem remains. The only way to use mozilla in my computer is restarting the windows in safe-mode. Last thing: i already tried to reinstall the program. Please help me!

I'm also using Windows 7 on a Lenovo U310 laptop.

The firefox profile manager doesn't come up when I search for it in the start menu or run.

I don't know if I messed it up which I probably did and I don't know what happened. I use two profiles. The default for the aurora/nightly and the one I made for the stable version. The default profile has the compatibility reporter and I wanted to install a program which wouldn't let me, so I changed the profile for the stable release to the default one. Somehow, ever since I can't access the manager in the start menu. So if I want to use the nightly and stable version at the same time, I can't anymore. When I log onto the administrator account, the manager comes up in the start menu and not in mine. Since i guess the manger is missing on my account now, I can't change the shortcuts to put it on a different profile.

Yea. I used it a couple times, so I know I have to close firefox. Also, I asked this late last night so I have to finish editing the post.

LMS 3.2 Deamon manager doesn't start

Similar Messages

Maybe you are looking for