LMS 3.2: DFM3.2.0 error

I faced one problem about my ciscoworks 3.2 which is DFM3.2.0 cannot up. others likes RME,CM and IPM was successfully running and configured.
i have added devices to DFM, the devices on learning status. so that, all other functions cannot be configured as normal.
at DFM home page, on High Severity Alerts, the error message states "an exception occured.Please Check the AAD.log file for further details".
i have check the file and it has said about "ogs_server_urn cannot be found". i have checked to process status and restarts all the ogs_server but DFM still not function.
please guide me, i am beginner to ciscoworks.

Hi,
kindly make an entry of cisco works in the HOSTS file.
Location: C:\WINDOWS\system32\drivers\etc
x.x.x.x
for e.g
10.78.141.29 ciscoworks
then restart the daemon manager and check the issue.
Thanks
Afroj

Similar Messages

LMS 2.6 User Tracking - Application error: URN_NOT_FOUND

Hi,
When I run a quick report in Campus Manager (User Tracking > Reports) I get the following error appearing in a window:
Application error: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!.
Could anybody help me?
I attach the ctm_config.txt file
thanks

From which directory did you get this ctm_config.txt? I need to see the ones under NMSROOT/MDC/tomcat/webapps/campus/WEB-INF/lib and NMSROOT/MDC/tomcat/webapps/cmapps/WEB-INF/lib.
Since this is LMS 2.6, I also need to see the output of the pdshow command.

LMS 3.2: Software Distribution - Generic Error

Hy.
I need to roll out an IOS on r.a. 250 devices. But when I try to distribute any software image via RME I always get the same error. I'm unable to start the job because in step one after selecting image and devices I get "failure" for all devices. When I click on "failure" a pop-up window opens telling me "generic error". Please have a look at the attached screenshot.
What does this mean and how can I fix this? This is really urgent!
All devices are completely managable (and managed) by the LMS.
Thank in advance!
Marc

Which IOS image are you trying to deploy and which device ?
Go to Common Services --> Software Center --> Software Update and provide screenshot.
Go to RME --> Admin --> Software Management ---> View/Edit Software Prefrences and check to see if "Include Cisco.com image " for recommendation is selected. If not, check them.
Try a different image that is higher that the current one and or use a GD image.

Installing lms 4.2.3 for windows error

Dear,
im trying to install Cisco prime LMS 4.2.3 for Windows 2008 R2 standard x64.
however i have received this error message.
----- end of Dependency Handler Log File
-----Dependency Handler Errors
ERROR: csjre not found
ERROR: Component csjre is not found.
cdone : depends on :csjre
----- end of Dependency Handler Errors
INFO: Finished at 13:10:21 ,12/24/2012 ,Pacific Standard Time
===================- Possible Warnings/Errors Encountered -===================
WARNING: Automatic data backup do not happen during this installation. We recommend you to take a backup of data before starting this installation.
ERROR: csjre not found
ERROR: Component csjre is not found.
how can i fixed this error?
regards
Emre

Have you installed 4.2 first? The 4.2.x releases require a working installation of 4.2 to build upon.
Sent from Cisco Technical Support iPhone App

CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal

I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started.
Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
I add the installation log file;
And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.
He added the logs generated by the LMS services Tomcat and Apache

Hi,
Here are the various errors/warning I found while looking through the attached logs.
WARNING:The application that you are installing requires new tasks to be
WARNING:registered with ACS. If you have already registered this application
WARNING:with ACS from another server, you do not need to register it again.
WARNING:However if you re-register the application, you will lose any custom
WARNING:roles that you had created earlier for this application in ACS.
WARNING:Some features in ACS may not work correctly on Dual-stack servers.
Warning: System memory is less than the minimum requirement.This may affect performance.
Warning: Current swap space is less than the minimum requirement. This may affect performance.
WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
INFO: User Selected to Reboot the Machine
Installation Completed at 16:38:06
Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
[warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
[Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
Cookie value is invalid
LTGateway.run(): connection to LWMS failed, trying again, Nov 23 19:22:28
You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
The next step for you:
Check the running processes via cmd line (pdshow -brief).
Check that all processes are running as expected. If they are then take a look at what is keeping ports open on your box (netstat -anob). From above, the reason may be an application occupying a port LMS needs. Also check the Windows error logs.
Check the following services, they should look like:
Ciscoworks ANI database engine :Manual
CiscoWorks Daemon Manager :Auto
CiscoWorks RME NG database :Manual
CiscoWorks Tomcat Servlet engine : Manual
CW VisiBroker Smart Agent :Manual
CiscoWorks Web Server :Manual
CWCS Cmf database engine :Manual
CWCS rsh/rcp service :Auto
CWCS syslog service :Auto
CWCS tftp service :Auto
DFM dfmEpm :Manual
DFM dfmFh :Manual
DFM dfmInv :Manual
4. Log in as the local Administrator (not Domain).
Stop daemons (net stop crmdmgtd)
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
navigate to ..\NMSROOT\setup\support
Execute resetCasuser.exe
Start Daemons (net start crmdmgtd) and wait 20 minutes.
Check if condition persists.
5. Check the output of ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
A couple other things:
Set the server name to be the server name with the domain as well.
Set the primary DNS suffix to match
Modify md.properties & Registry & set PX_FQDN to the above.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
- HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
Thanks.

LMS 4.1 - dbreader.html -- Authorization error with DB-Users

Hi all,
in our lab-environment we installed LMS 4.1 from scratch.
Trying to connect to eg. ani-db via URL (https://<server>/dbreader/dbreader.html) with user cwsiSA I got error message
stating "Authorization error".
Is that default behavior?
We need SQL-Connect to DB-Tables, as some "self-written" perl-scripts try to collect data.
Are there any steps necessary to enable access to DB-Tables (and Views) ?
Thanks for your feedback
Lothar

Probably the user role is missing this authorization. Go to Admin > System > User Management > Role Management Setup, and make sure the role assigned to this user includes DBreader access. You are looking for Lan Management Solution > Admin > System > DBReader Access.

CiscoWorks LMS 3.2 SMTP configuration giving error

HI Friends,
I have installed Ciscoworks 3.2 on Dell poweredge 2950 server, when i try to configure SMTP email notification settings, it's giving me error "Invalid IP address or server name please enter valid SMTP server name"
Request you to all please help me.

Hi,
I had the same situation on my LMS 3.2.
I had to change the SMTP server and got the message, that the IP-address or name of the server is invalid.
I changed the file, too. But it is not working.
For testing I created a new discovery job and the system sends a info mail to for such activity.
I got the following error message:
MailID is not given by user. Hence, No mail will be sent for this scheduling.
Maybe somebody can give more advice to this.
Thanks,
Sven

LMS 3.2 for Windows Installation Error

I'm trying to install LMS 3.2 by either upgrading our current 2.6 installation or installing a fresh server. In either case I receive the following error:
Error Code: -5005 : 0x80030309
Error Information:
>Kernel\KernelMedia.cpp (95)
>SetupNew\setup.cpp (851)
PAPP:CiscoWorks
PVENDOR:Cisco Systems Inc.
PGUID:11B8350D-559C-45BE-8EDC-A7B2DA265F7F
$15.0.0.603
@Windows Server2003 Service Pack 2 (3790)
IE Version: 8.0.6001.18702

Try downloading the software from cisco.com/go/marketplace and click on "Cisco Promotional Store" > CiscoWorks LAN Management Solution (Windows) 3.2.
This would download an .exe and when you run this .exe file, it would download the LMS 3.2 application. With your existing license file, you will get a full blown version of the software.

LMS 4.1 - Job approval Disable error

Hi all,
I have created VRF from LMS 5.1. some days ago i created it sucessful but now it gives me job fail and reason is Job Approval Disable.
Can anyone give hint what is the problem
Please help.
i have attached the images

Job Approval is an option which it just notifies, that it is disabled. Like other options, ie Email Notification, Parallel Execution, Job Password etc.
Job approval is an option where help desk users after creating any job need to wait for execution of job till a user with Approver priviliedge has not approved the job.
The Failure may have some other underlying problem, like incorrect credentials etc. On fail device you should check the failure reason.

LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.

Hello,
I have a problem with inventory collection from several devices getting
"RICS0001:Internal Error,unable to process the collected data from the device."
ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deleted

Did you schedule an inventory collection job?
Delete schedule and recreate it using device group.
Cheers,
Michel

LMS content loading error

Hi
When loading my AICC published content (Captivate 6) to the LMS (CSOD), I get a severe error: "Undetected error loading this file, course installation was cancelled". Refereced to the captivate.crs file.
Anyone know how to resolve or how to fix?
txs
Here's the full error log.
Severe
COURSE
FILE
PATH
ERROR DATE
SEVERITY
LINE
POSITION
Unknown
captivate.crs
m1\captivate.crs
7/15/2013 3:39:20 PM
Error
0
0
Error: Undetected error loading this file, course installation was cancelled
Non-severe
COURSE
FILE
PATH
ERROR DATE
SEVERITY
LINE
POSITION
Unknown
captivate.cmp
m1\captivate.cmp
7/15/2013 3:39:20 PM
Information
0
0
Error: captivate.cmp was included but is not a required file.
Unknown
captivate.pre
m1\captivate.pre
7/15/2013 3:39:20 PM
Information
0
0
Error: captivate.pre was included but is not a required file.
Unknown
captivate.ort
m1\captivate.ort
7/15/2013 3:39:20 PM
Information
0
0
Error: captivate.ort was included but is not a required file.

I had this same error last week and found that I just needed to add a course description to the .crs file. Here's what I did:
- Opened the .crs file in WordPad or NotePad
- Found the spot in the .crs file were it said [Course Description]
- Typed the name of the course after this field.
It seemed to do the trick. I'm still not able to get the AICC package to play correctly or record the score, but it loads to our LMS without the CRS error, at least.

Logfile Recommended size over error - LMS 3.1

Log file
Directory
File Size (KBytes)
Recommended Size Limit (KBytes)
File System Utilization%
jrm.log
C:\PROGRA~1\CSCOpx\log
107084
1024
Less than 1%
stdout.log.*
C:\PROGRA~1\CSCOpx\mdc\tomcat\logs
57591
102400
Less than 1%
dbbackup.log
C:\PROGRA~1\CSCOpx\log
11772
1024
Less than 1%
psu.log.*
C:\PROGRA~1\CSCOpx\log
4832
1024
Less than 1%
restorebackup.log.*
C:\PROGRA~1\CSCOpx\log
3075
51200
Less than 1%
I have already configured recommended file size - file rotations in my LMS. still i keep getting this errors. Can you help me getting out of these RED alarms !!

C:\Program Files\CSCOpx\bin>perl "c:\Program Files\CSCOpx\bin\logrot.pl" -v
Tue Dec 1 19:53:50 2009: INFO: Read variable backup_dir --> D:\Log\
Tue Dec 1 19:53:50 2009: INFO: Read variable delay --> 60
Tue Dec 1 19:53:50 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\dbbackup.log, B
ackup File = D:\Log\\dbbackup.log
Tue Dec 1 19:53:50 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:53:50 2009: INFO: Rolling logfile archive.
Tue Dec 1 19:53:50 2009: INFO: Archiving C:\PROGRA~1\CSCOpx\log\dbbackup.log to
D:\Log\\dbbackup.log.0.
1 file(s) copied.
Tue Dec 1 19:53:51 2009: INFO: Rotating C:\PROGRA~1\CSCOpx\log\dbbackup.log.
Tue Dec 1 19:53:51 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\jrm.log, Backup
File = D:\Log\\jrm.log
Tue Dec 1 19:53:51 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:53:51 2009: INFO: Rolling logfile archive.
Tue Dec 1 19:53:51 2009: INFO: Archiving C:\PROGRA~1\CSCOpx\log\jrm.log to D:\L
og\\jrm.log.0.
1 file(s) copied.
Tue Dec 1 19:54:01 2009: INFO: Compressing D:\Log\\jrm.log.0 using gzip -f
Tue Dec 1 19:54:08 2009: INFO: Rotating C:\PROGRA~1\CSCOpx\log\jrm.log.
Tue Dec 1 19:54:08 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\EDS.log, Backup
File = D:\Log\\EDS.log
Tue Dec 1 19:54:08 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:54:08 2009: INFO: Not archiving C:\PROGRA~1\CSCOpx\log\EDS.log bec
ause it is not big enough.
file size = 2745636, conf size = 19118080
Tue Dec 1 19:54:08 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\CSPortal.log, B
ackup File = D:\Log\\CSPortal.log
Tue Dec 1 19:54:08 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:54:08 2009: INFO: Not archiving C:\PROGRA~1\CSCOpx\log\CSPortal.lo
g because it is not big enough.
file size = 132588, conf size = 1048576
Tue Dec 1 19:54:08 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\EDS-GCF.log, Ba
ckup File = D:\Log\\EDS-GCF.log
Tue Dec 1 19:54:08 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:54:08 2009: INFO: Not archiving C:\PROGRA~1\CSCOpx\log\EDS-GCF.log
because it is not big enough.
file size = 26184, conf size = 1048576
Tue Dec 1 19:54:08 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\psu.log, Backup
File = D:\Log\\psu.log
Tue Dec 1 19:54:08 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:54:08 2009: INFO: Not archiving C:\PROGRA~1\CSCOpx\log\psu.log bec
ause it is not big enough.
file size = 894079, conf size = 7122944
Tue Dec 1 19:54:08 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\mdc\tomcat\logs\std
out.log, Backup File = D:\Log\\stdout.log
Tue Dec 1 19:54:08 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:54:08 2009: INFO: Not archiving C:\PROGRA~1\CSCOpx\mdc\tomcat\logs
\stdout.log because it is not big enough.
file size = 56244907, conf size = 111889408
Tue Dec 1 19:54:08 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\CSDiscovery.log
, Backup File = D:\Log\\CSDiscovery.log
Tue Dec 1 19:54:08 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:54:08 2009: INFO: Not archiving C:\PROGRA~1\CSCOpx\log\CSDiscovery
.log because it is not big enough.
file size = 1084297, conf size = 1084416
Tue Dec 1 19:54:08 2009: INFO: Logfile = C:\PROGRA~1\CSCOpx\log\CSDeviceSelecto
r.log, Backup File = D:\Log\\CSDeviceSelector.log
Tue Dec 1 19:54:08 2009: INFO: Attempting to use C:\PROGRA~1\CSCOpx\bin\logrot_
stat.exe to obtain logfile size.
Tue Dec 1 19:54:08 2009: INFO: Not archiving C:\PROGRA~1\CSCOpx\log\CSDeviceSel
ector.log because it is not big enough.
file size = 99013, conf size = 1326080
C:\Program Files\CSCOpx\bin>

Error Message in EoL/EoS Report

currently running LMS 3.2 get the following error message when running the Eol/Eos report: under reason for failure get unable to get data from Cisco.com try again later. using the same login that is used to login to Cisco.com.

The online version of this report is currently broken. We have been working to fix it for a while now, but unfortunately, I do not have an ETA. The workaround is to use the offline report mode, and download the data from http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme .

LMS 3.2 Backup Failed

Hi, i try to backup lms but it always give me errors,i did it 2 times one with GUI from common services and the other one using command, the output is
2 errors reported
[Sun May 8 18:20:36 2011] Validation D:/LMS-BackUp/May-2011/0\0\campus\database\ani.db failed.
[Sun May 8 18:20:36 2011] Validation D:/LMS-BackUp/May-2011/0\0\campus\database\ani.db failed.
[Sun May 8 18:20:36 2011] ERROR(1403): Database aniDb backup failed and . Check the log file for information.
[Sun May 8 18:20:36 2011] Backup failed: 2011/05/08 18:20:46
Primary key for "EmbuUserTracking" has missing index entriesSQL error (-300) -- Run time SQL error -- Validation of table "EmbuUserTracking" has failed
VALIDATE TABLE "cwsiSA"."HistoryHostTracking"
Index "historyupdate" has invalid or duplicate index entries
Index "historyupdate" has missing index entries
SQL error (-300) -- Run time SQL error -- Validation of table "HistoryHostTracking" has failed
VALIDATE TABLE "cwsiSA"."HistoryUserTracking"
2 errors reported
[Sun May 8 18:19:20 2011] Validation D:/LMS-BackUp/May-2011/0\0\campus\database\ani.db failed.
SQL Anywhere Command File Hiding Utility Version 10.0.1.3830
SQL Anywhere Backup Utility Version 10.0.1.3830
(41672 of 41670 pages, 100% complete)
Database backup completed
SQL Anywhere Command File Hiding Utility Version 10.0.1.3830
SQL Anywhere Validation Utility Version 10.0.1.3830
2 errors reported
SQL error (-300) -- Run time SQL error -- Validation of table "EmbuUserTracking" has failed
SQL error (-300) -- Run time SQL error -- Validation of table "HistoryHostTracking" has failed
[Sun May 8 09:23:22 2011] Validation D:/LMS-BackUp/May-2011\0\campus\database\ani.db failed.
[Sun May 8 09:23:22 2011] Validation D:/LMS-BackUp/May-2011\0\campus\database\ani.db failed.
[Sun May 8 09:23:22 2011] ERROR(1403): Database aniDb backup failed and . Check the log file for information.
[Sun May 8 09:23:22 2011] Backup failed: 2011/05/08 09:23:32
I have checked the directory and the size of data is aroung 15 GB is this correct backup
thanks for your help

Hi Joseph,
I run the perl.exe from C:\Program Files\CSCOpx\bin and then i write the command
C:\Program Files\CSCOpx\objects\db\conf\configureDb.pl action=validate dsn=cmf
I got the below result, i am new perl script and i i dont know what i did wrong
Backslash found where operator expected at - line 1, near "CSCOpx\"
Backslash found where operator expected at - line 1, near "objects\"
Backslash found where operator expected at - line 1, near "db\"
Backslash found where operator expected at - line 1, near "conf\"
thanks for your help and support

Cisco LMS 4.2.3 - Nexus VDC - SNMP

Hi All,
I am having some trouble with getting inventory collection work for the VDC's of a Nexus 7k from LMS 4.2.3.
The collection works for the main VDC, just not any of the others.
I have verified (using SNMPWALK) from the LMS server that the snmp credentials in use on the LMS for these VDC's is correct.
We are using SNMP V3.
The error I am getting when trying to run an inventory collection is:
Device Collection Failed. Failed to fetch Containment details.
Does anyone have any experience with getting VDC's to work in LMS and may have seen this error before?
Thanks in advance.

Hi ,
You are hitting the below BUG:
LMS 4.2.3 Inventory collection is failing for some of Nexus 7k devices
CSCuh49814
Development team is still working on the fix.
Thanks-
Afroz
[Do rate the useful post]

LMS 3.2: DFM3.2.0 error

Similar Messages

Maybe you are looking for