LMS 3.2 gives Application error during Campur User tracking

Hi All,
As per the subject during Campus User Tracking following error comes.
Application error: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!..
Please let me know if anybody has solution for this.
Thanks in advance.
Samir

this looks like CSCsz79649
I assume at least one of the ctm_config.txt files became corrupted.
have a look at the file ctm_config.txt in both these locations:
    NMSROOT/MDC/tomcat/webapps/campus/WEB-INFlib
    NMSROOT/MDC/tomcat/webapps/cmapps/WEB-INF/lib
and compare the content to the clean files Joe posted in this thread:
    https://supportforums.cisco.com/message/3153454#3153454
Note: the parameter DYNAMIC_PORT_ALLOCATION=0 can be added to both files;
If your files (or at least one) are different, then stop the daemon manager. When services are stopped, replace the corrupted file with the one Joe posted. Also move the ctmregistry and ctmregistry.backup files in these directories to a location outside NMSROOT (like C:\Windos\tmp)
Restart the daemon manager.
If everything is working you can remove the ctmregistry and ctmregisry.backup files you previously moved to C:\Windows\tmp

Similar Messages

Launching iStore from jDeveloper gives Application Error

Hi All,
Launching iStore from Jdeveloper gives application error. I am new to this arena. Here is the actual description.
We are on 11.5.9 system however applied the RUP1 of Sales and Marketing for 11.5.10 which inturn gave us the 11.5.10 iStore.
I am using jDeveloper 10g with J2SE 1.4.2_06 as per the instruction. Intially all the test files for db , session worked fine as per the suggestions from oracle Metalink Note# 419887.1 . I could also load the login page initially though upon entering the login details it gets me to the same application error page. After some clearning of cache files and reloading the jdeveloper this time it does not even take me to the login page and gives the application error message.
Here is the acutal message : The application is currently not available or an unexpected error has occured. Please try again later.
If this message persists, please contact the system administrator.
I can login to the UI from the actual server but not sure why it does not work from the jdev. Please guide me and let me know what went wrong. Here is the sample guest log file.
15:40:4:391 [Session.checkContextValues] party id is null
15:40:4:422 [Session.setParty] Enter: party id=null
15:40:4:422 [Session.getCustomerId] Enter: GUEST
15:40:4:438 [Session.getCustomerId] Call stmt.executeQuery
15:40:4:469 [Session.getCustomerId] Call rset.next()
15:40:4:485 [Session.getCustomerId] Get customer id
15:40:4:501 [Session.getCustomerId] customerId is 82238
15:40:4:516 [Session.getCustomerId] Exit
15:40:4:516 [Session.setParty] partyId = 82238
15:40:4:516 [Session.getPartyType] Enter 82238
15:40:4:547 [Session.getPartyType] party type = PERSON
15:40:4:594 [Session.setParty] party type = PERSON
15:40:4:594 [Session.setParty] user is individual user
15:40:4:657 [Person.findByPartyId] query: SELECT PARTY_ID,PARTY_NUMBER,PARTY_NAME, PERSON_FIRST_NAME, PERSON_MIDDLE_NAME, PERSON_LAST_NAME,OBJECT_VERSION_NUMBER, STATUS, STATUS_CODE FROM HZ_PARTIES P, FND_USER F , JTF_UM_USERTYPE_REG UT WHERE P.PARTY_ID = F.CUSTOMER_ID(+) AND UT.USER_ID(+) = F.USER_ID AND P.PARTY_ID=:1 AND P.PARTY_TYPE IN ('PERSON','PARTY_RELATIONSHIP')
15:40:4:797 [StoreProfileCacheLoader.load] Enter
15:40:4:813 [StoreProfileCacheLoader.load] val = nul
15:40:4:813 [StoreProfileCacheLoader.load] Exit
15:40:4:829 [IBEUtil.getStoreProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:860 [IBEUtil.getSpecificProfile] Enter; profile=IBE_DIAG_EMAIL_ADDRESS applId=null respId=null
15:40:4:876 [IBEUtil.getSpecificProfile] Exception caught: Exhausted Resultset
15:40:4:876 [IBEUtil.getSpecificProfile] value=null
15:40:4:891 [IBEUtil.getSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:891 [IBEUtil.getStoreSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:891 [ibeCZzdError.jsp] Email: null
15:40:4:907 [RequestCtx.end] PERF: REQUEST STOP
Thank You
Srikanth

You're in the wrong forum. This one is dedicated to Oracle forms. Try either the eBusiness-forum, or the JDeveloper-forum.

Application error during release to LiveCache

Hi Experts.
I got some orders stucked in my Outbound Queue in ECC side as SysFail with the error "Application error during release to LiveCache". When I click to activate the queue the order is released and transferred to APO. The question is Why is getting stopped?
Thank you!

Hi Everybody.
SAP Provided me a note to implement to fix this issue. The note number is 1238616 but I need to understand how to reproduce this error in SandBox to implement this note and check if the problem will get fixed...
Currently my OSS is assigned to SAP (Live Cache team) to let me know the root cause for this problem and how to reproduce in lower environment (sandbox) to implement the note and check if the problem will get fixed.
As work around we are manually activating these errors in CIF queues that are getting clean.

Clscfg.exe - Application error during 10g install on W2K3

I get 2 installation errors when installing 10g (software only install) on Windows 2003. Both appear to be directly related to the fact that clscfg.exe does not execute. I receive the pop up titled "clscfg.exe - Application Error" containing the text:
the instruction at "0x77bd4ece" referenced memory at "0x00000000". The memory
could not be "read'. Click on "OK' to terminate the program.
Has anyone encountered this? Know a workaround?

I have exactly the same problem under Windows XP. There seems to be a bug that looks very simular to the error we have, and there is a patch for it (bug 3555863), but the patch does not work, because you need to execute clscfg again during the patch execution, but clscfg craches whenever I try to execute it.
So, I do not know a workaround yet. Did you find out anything in the meantime?

I've got error message " CTSvcCDA.exe application error " during insall MediaSour

I need help anybody who has soultion about this error .
When I install Nomad Explorer & MediaSource, I had two error message .
first, in case of nomad explorer, "security.exe application error"
seconde,Mediasorce, "CTSvcCDA.exe application error"

Try disabling Protected Mode. But since you cannot even open Adobe Reader by itself, you can do it via the Windows registry: download, unzip, then run the registry script from https://files.acrobat.com/a/preview/441a5fb2-7a82-443d-9632-9a639692a565

SPS7 .hdbprocedure with INSERT gives privilege error during activation

Hello All,
We have upgraded to SPS7. We are trying to use an INSERT statement on a database table in a .hdbprocedure. For this we removed the READ SQL
addition on the SQL header, made SQLSCRIPTMODE parameter as UNSECURE in Configuration.
But the problem with privilege seems to be at the table level. I try to create a Custom role(.hdbrole). This gets activated fine when I just give the SELECT on the SCHEMA.
But when I add INSERT in addition to SELECT privilege on schema holding the table it gives an error Cannot Activate/No Privilege to activate Catalog Object
The INSERT on the table is not letting me activate the .hdbprocedure or a custom role. Can you please advice what could be the problem.
Also, an SLT has been configured to get data into these set of tables, could this be the problem.
Best regards,
Pavan

Hi Phoenix,
The user should grant the respective read/update/delete privilege on the schema used in the Procedure to _SYS_REPO user.
If this is a SLT generated schema then there are roles generated which provide such privilges o the users you can use them to grant privilege to _SYS_REPO user.
Regards,
Anjali.

Windows 8.1 - "explorer.exe - Application Error" during shutdown process

Hi,
After I upgrade to Window 8.1, i get "explorer.exe - Application Error" dialog every shutdown.
It contain: "The instruction at 0x74fd40b9 referenced memory at 0x00000000. The memory could not be read.
Click OK to terminate the program
Click on CANCEL to debug the program."
(Sorry, my account can't post link or image. So i can't show you the picture capture)
When I had used Window 8, it didn't happen.
Please help me to solve this problem.
My machine is: HP ENVY DV6 7214nr.
Thanks,
Tan Nguyen

I am having the issue when shutting down windows 8.1. Did not occur before the update with Windows 8. At shut down, Pop up displays for only a few seconds. HP Envy I7.
Explorer.exe - Application Error
The instruction at 0xa73640b9 referenced memory at 0x00000000. The memory could not be read.
Click on OK to termintate the program.
When I start the PC, and shut it down after a few minutes of running, this error does not occur. Only after the PC has been on for awhile and I have used several programs.
And for those of us unfamiliar with creating a Reg entry, the instruction are not very clear. Once I create this text file...what do I call it and where and how do I insert it....?
UPDATE Problem fixed: I followed the suggestions of a Windows 8 clean boot from Microsoft.
After going through the running applications one by one, I finally isolated the problem on my HP Envy to the Bluetooth Application. I disabled the Bluetooth task in Startup and made sure it did not load. Afterward, no more Explorer.exe - Application
Error when I shut down the PC. This program is a Ralink Bluetooth driver and exe. program running on startup. I am not sure if HP has offered an updated driver for it as of yet.....

OIM-DBAT ...ERROR during Disabling user

Hi,
I am using database app tables connector with OIM, wherein the user is being provisioned to a database table. When user is Disabled, the assosciated database resource does not gets Disabled, Disable User is rejected and It gives following error:
GCPROV.ProvTransportProvider.DBProvisioningTransport.DB_STATUS_FIELD_LOOKUP_ERROR" does not correspond to a known Response Code. Using "UNKNOWN
The table has some attributes viz. Username, user id, fname, lname, Status(can be 0 or 1), email.
The requirement is: when user id terminated in OIM, the respective database resource should get Disabled, that is the status should be updated to 0.

Hi Sunny,
When I disable OIM user , Disable User process of the database account is invoked but it gets rejected giving the above stated error. And the status field in process form is not updated. In the GTC configuration, I have mentioned the table column name(ENABLED,which can take values 0 or 1) that will be acting as status ,and also provided the Lookup code name that contains the status mappings as follows:
Code Decode
Active 0
Disabled 1

Error during SBO User authentication

Hello,
When I open a DTW and try to log on to any of my database then i get this error message "Error during SBO authentication"
Can somebody help me out?

Hi Bright,
Please check SAP Version and DTW Version is same or not.
If not same then please try to remove DTW and install Same Version of DTW as SAP B1.
Hope this helps
Regards::::
Atul Chakraborty

JSPM gives JRE error during Update of CE 7.11 to CE 7.2

Hello Gurus,
I downloaded the SPS files for CE 7.2 update from CE 7.11 SPS4.
I started the update using CEUpdateManager. After some time, the update failed and after that when I try to run it again, it fails to login to JSPM and I understand from JSPM logs that JSPM is looking for JRE 1.6.0 or higher, whereas CE 7.11 has JVM 5 which corresponds to JRE 1.5.
The thing is, CE 7.11 and CE 7.2 systems do not need separate JDK/JRE installations as they use these from SAPJVM. But during my upgrade, JSPM has got updated to 7.20 whereas the rest of the components did not and that is where update failed. So now, even if I try to run JSPM, it does not start and only gives the following error message at the command prompt:
Updating JSPM content...
Updating local copy of SAP JVM ...
Execution failed: Java Runtime version 1.5.0_17 detected. JSPM requires Java Run
time 1.6.0 or later to run.
com.sap.sdt.util.diag.DiagException: Java Runtime version 1.5.0_17 detected. JSP
M requires Java Runtime 1.6.0 or later to run.
        at com.sap.sdt.jspm.main.Jspm.checkJVMVersion(Jspm.java:223)
        at com.sap.sdt.jspm.main.Jspm.initialize(Jspm.java:206)
        at com.sap.sdt.jspm.main.Jspm.main(Jspm.java:317)
In JSPM.LOG file, I can see:
Error]: Java Runtime version 1.5.0_17 detected. JSPM requires Java Runtime 1.6.0 or later to run.
I tried to manually patch JVM to 6 level using note 1025085 and tried bootstrapping as well using note 710663 but none of these worked and upon restarting the system, still SAPJVM 5 is getting copied by sapcpe.
Please suggest how exactly should I solve the problem of JSPM needing jre 1.6.0 while SAPJVM providing 1.5. I am pretty sure that installing JRE 1.6.0 on my machine will not help in CE systems and still I have tried that but to no help.
Please help.
Thanks,
Shitij

Hi Mahesh,
I had already downloaded SAPJVM 6 as well. My stack queue was fine.
But, now my issue is solved. It turns out the CEUPDATEMANAGER file that we were using earlier, was still for 7.11 only, whereas we had to use the one from 7.20. We did not realize this mistake because the stack files had been downloaded almost a month ago.
We have now downloaded the 7.20 CEUPDATEMANAGER SAR file and the upgrade worked smoothly.
Thanks,
Shitij

ITunes continues to give me error during installation

I have a old windows laptop and everytime I try and finish the installation it says error

The feed itself seems OK and can be subscribed to manually in iTunes, and the latest episode downloaded OK.
However, on checking the URL of the latest episode's media file in Safari resulted in a download: it should play in the browser. Though forcing a download doesn't seem to upset the iTunes application, the Store doesn't like it since it needs to be able to stream the file to play it in the Store page.
It's also a requirement that the server can handle 'byte range requests' (where only part of the file is requested at a time instead of the whole thing) because this is the method used by iTunes. It was testing for this that showed there was a problem because I got a 'forbidden' error (in other words, because a download is forced it's not possible to request only part of the file).
It must be possible to get this straight on Podomatic since they handle a lot of podcasts, but you will need to take it up with them and check that it's been corrected.
The first test is to paste the media file URL into Safari's address bar and hit return: after a short delay it should play in the browser window. If it downloads you still have a problem.

Classic Planning application Error during Setup

What is the SQL Command to FIX THIS ERROR
no privileges on tablespace 'USERS'
Unable to create Schema for application. Exiting Application Creation.
Please advise

Log into SQLPLUS
GRANT UNLIMITED TABLESPACE TO <username>;
e.g.
GRANT UNLIMITED TABLESPACE TO planapp;
Cheers
John
http://john-goodwin.blogspot.com/

With the new seession in IE gives session error for new user

Hi,
In new opened IE if i tries to login with new user. It is switching b/w the files in the status bar(ie., Header1.jsp and ListServicecall.jsp simultaneously) and at end the session error result will arise.
But for the second time if i login with the same username/password the page is displaying properly. please Can any one help out.
Thanks,
Satish R

First time if the user logins to IE in the HP Service Desk(SD) page. Some of the pages will iteratively loops and give a session expires error. After that the user logins to the page with no error.
If i create a new copy of the data from the existing folder and if i try to run then the result will be error for that folder also.
ie., Assume folder 123 where, first time for every new login user the session expire error occurs. later they'll login without any problem.
If i rename the folder 123 to xyz/create new copy and rename then, the same problem repeats. First time for the new user it will give session expire error and later he can login to the HPSD page with no error.
Is it require cookies to be programmed in that program.
Regards,
Satish R

Error during creating user with OracleMembershipProvider (ODAC 11.1.0.5)

Hi. Perhaps there is a bug in DB part of OracleMembershipProvider (ODAC 11.1.0.5.10 beta): PL/SQL function ORA_ASPNET_MEM_CREATEUSER always raises exception ORA-01858, so Create User functionality doesnt work in any scenario.

Hi.
After some investigations I found this error appears when enviroment variable NLS_LANG is set to national language/codepage. In my case, NLS_LANG=RUSSIAN_CIS.CL8MSWIN1251.
With this settings any try to create user raises ORA-01858 exception.
If the NLS_LANG enviroment variable is deleted, all work fine.
Here is example code of user creation:
<%@ Page Language="C#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
protected void ButtonCreateUser_Click(object sender, EventArgs e)
Membership.CreateUser(TextBoxUserName.Text, "!qwertyuiop");
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:TextBox ID="TextBoxUserName" runat="server"></asp:TextBox>
<asp:Button ID="ButtonCreateUser" runat="server" OnClick="ButtonCreateUser_Click"
Text="Button" UseSubmitBehavior="False" /></div>
</form>
</body>
</html>

Errors during single user UNIX startup

When I boot into single user mode on the iMac G5, I get two errors.
AppleU3: Warning: Platform-chip-fault expected, but not found
and...
CSRHID Transition Driver:: Probe: -s
CHRHID Transition Driver:: Probe booting in single user .. do not match
Anyone know what they mean?
iMac 20 G5 Mac OS X (10.4.8)

It does continue to boot. No noticable problems. I got this reply on the iMac G5 forum.
As I understand it, wynmoroftn, the Platform-chip-fault message is not usually something you need to worry about unless it is accompanied by other symptoms.
see "Electric Sheep's" post at http://forums.macosxhints.com/archive/index.php/t-52901.html
In the electronics world, 'U' is the prefix designation for any integrated circuit on a PCB.
Some of these integrated circuits will include a pin-out for a FAULT signal, which feeds back to the CPU or some other logic whenever a fault condition arises.
In your case, you probably have a revision of the U3 chip which doesn't have a FAULT pin.
// If we have a chip fault interrupt, install the handler and enable notifications. It's normal for
// this to fail on some platforms, since U3.1 and U3.2 don't have a chip fault pin.
Thus, the logged failure is normal.
It would seem that from the source code, U3 (or U4), is related to the PMU (or is the PMU).
As far as the CSRHID messages go, I'm pretty sure this refers to the CSR "Human Interface Driver" associated with the computer's bluetooth hardware.
It may simply be that it is not implemented when the computer is booted in Single User mode.
Cheers
Rod

LMS 3.2 gives Application error during Campur User tracking

Similar Messages

Maybe you are looking for