LMS 3.2 install (windows) - checking locked files
I'm at a point in the LMS 3.2 install where it looks like its hung on the "Checking locked files...." step. How long should I expect this process to take? It's been going for an hour and I haven't seen anything going on.
I agree with the praise for the answer, I had the same issue and found out this workaround myself before seeing this topic.
But it's still a nasty workaround: I don't really want to set the daemon temporarily to Manual for each update. Does Cisco acknowledge this as a bug and resolve it in a next release?
Similar Messages
-
Unable to install SQL 2005 Service Pack 3 (Unable to install Windows Installer MSI file)
I'm unable to install SQL 2005 Service Pack 3. This results in the following error message: Unable to install Windows Installer MSI file.
Could someone please help me. Thanks in advance!
=== Verbose logging started: 3-4-2009 9:33:00 Build type: SHIP UNICODE 4.05.6001.00 Calling process: d:\5ddfa356349ddf2e676c336d95c5\hotfix.exe ===
MSI (c) (E0:88) [09:33:00:404]: Resetting cached policy values
MSI (c) (E0:88) [09:33:00:404]: Machine policy value 'Debug' is 0
MSI (c) (E0:88) [09:33:00:404]: ******* RunEngine:
******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
******* Action:
******* CommandLine: **********
MSI (c) (E0:88) [09:33:00:404]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:88) [09:33:00:404]: Grabbed execution mutex.
MSI (c) (E0:88) [09:33:00:419]: Cloaking enabled.
MSI (c) (E0:88) [09:33:00:419]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:88) [09:33:00:419]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:01:747]: Running installation inside multi-package transaction C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:01:747]: Grabbed execution mutex.
MSI (s) (28:CC) [09:33:02:029]: Resetting cached policy values
MSI (s) (28:CC) [09:33:02:029]: Machine policy value 'Debug' is 0
MSI (s) (28:CC) [09:33:02:029]: ******* RunEngine:
******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
******* Action:
******* CommandLine: **********
MSI (s) (28:CC) [09:33:02:685]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (28:CC) [09:33:03:450]: File will have security applied from OpCode.
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi' against software restriction policy
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi has a digital signature
MSI (s) (28:CC) [09:33:04:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (28:CC) [09:33:04:888]: End dialog not enabled
MSI (s) (28:CC) [09:33:04:888]: Original package ==> C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:CC) [09:33:04:888]: Package we're running from ==> C:\WINDOWS\Installer\3d3a713.msi
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: looking for appcompat database entry with ProductCode '{53F5C3EE-05ED-4830-994B-50B2F0D50FCE}'.
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (28:CC) [09:33:05:685]: MSCOREE not loaded loading copy from system32
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\2f1994e.msi 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Opening existing patch 'C:\WINDOWS\Installer\e6ba0.msp'.
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\e6ba0.msp 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Couldn't find local patch 'C:\WINDOWS\Installer\e6ba0.msp'. Looking for it at its source.
MSI (s) (28:CC) [09:33:05:825]: Resolving Patch source.
MSI (s) (28:CC) [09:33:05:825]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (28:CC) [09:33:05:825]: User policy value 'DisableMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Looking for sourcelist for product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Adding {EE92F683-5F5C-4970-BB0B-9AC591B60268}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Now checking product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media is enabled for product.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Trying source \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 2203 2: \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\SqlSupport.msp 3: -2147287037
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing net source list.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing media source list.
MSI (s) (28:CC) [09:33:07:654]: SOURCEMGMT: Resolved source to: 'SqlSupport.msp'
MSI (s) (28:CC) [09:33:37:732]: Note: 1: 1314 2: SqlSupport.msp
MSI (s) (28:CC) [09:33:37:732]: Unable to create a temp copy of patch 'SqlSupport.msp'.
MSI (s) (28:CC) [09:33:37:732]: Searching provided command line patches for patch code {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:37:763]: Note: 1: 1708
MSI (s) (28:CC) [09:33:37:763]: Product: Microsoft SQL Server Setup Support Files (English) -- Installation failed.
MSI (s) (28:CC) [09:33:37:763]: Windows Installer installed the product. Product Name: Microsoft SQL Server Setup Support Files (English). Product Version: 9.00.4035.00. Product Language: 1033. Installation success or error status: 1635.
MSI (s) (28:CC) [09:33:37:779]: MainEngineThread is returning 1635
MSI (s) (28:28) [09:33:37:888]: No System Restore sequence number for this installation.
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:37:888]: User policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Machine policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:37:904]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (28:28) [09:33:37:919]: Restoring environment variables
MSI (c) (E0:88) [09:33:37:935]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:88) [09:33:37:935]: MainEngineThread is returning 1635
=== Verbose logging stopped: 3-4-2009 9:33:37 ===This post should definitely help you
http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
Feroz
Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights. -
The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
I am selecting 'Upgrade: Install Windows and keep files, setting and applications'.
I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
Any help would be muchos appreciated.Hi bitofagiggle,
I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
The below is some articles for reference:
Install
Windows 8.1 on a Mac
Your Manufacturer website:
How to install Windows using Boot Camp
Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to install windows on 2011 mac mini
how do I install windows 7 onto mac mini? I have read people say to copy windows onto a flashdrive. Then install from that. Question is do I use my iMac to copy windows install DVD to flashdrive, then plug flashdrive into my mac mini and finish install with bootcamp?
If you want, instead of using a USB drive with the Windows installer (and as you have Windows in a DVD and not in a ISO file), I recommend you to buy an external optical drive to use it to install Windows on the Mac mini. Any external optical drive will work.
If you need help installing Windows, print this file > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf -
Installing Ciscoworks LMS 4.0 on Windows domain member server.
Hello.
I'm looking for some suggestions about installing CiscoWorks LMS 4.0, and upgrade, on a domain member server running Windows 2008 R2 SE 64 bit.
Thanks.
AndreaHere are the basic install best practices:
1) Install as a local administrator (this means create a local account and add it
the "Administrators" group).
2) My Computer -> Properties -> Advanced -> Environment Variables
Set the USER TMP and TEMP to a shorten path like
C:\Windows\temp
3) Make sure you have FIXED pagefile size like 8182
My Computer -> Properties -> Advanced -> Performance Options -> Advanced
4) May need to reboot, certainly log out an back in to make sure step 2 applies.
5) Stop all anti-virus and firewall during the installation. Disable them in services and reboot if necessary.
* NOTES: Anti-virus can be re-enabled after installation, but you should EXCLUDE
the NMSROOT directory as long as LMS is installed on the server. DEP should
remain off (that is, set to only protect critical Windows system files) as long as LMS
is installed on the server.
* If Internet Information Services (IIS) is detected on your system and if you have
continued the installation with IIS services, you cannot use the port number 443 for
HTTPS. Instead, you must use the port numbers ranging from 1026 to 65535 for
HTTPS to avoid this conflict.
When performing the installation, make sure these two steps are followed:
* Install from original, locally attached media
* NEVER abort the installation after the installer says not to
It may not always be possible to install from original, locally attached media
(especially on VMs). But you should avoid from installing over the network as hiccups
can cause bad installations. If you are installing on a virtual machine, convert the DVD
to an ISO image, then mount that within the VM.
Here is the document detailing all ports needed to be allowed (excluded from policy)
for LMS 4.0
LMS 4.0 Port Usage
General Notes:
If you want to upgrade the operating system from Windows 2003 or Windows
2008 to Windows 2008 R2, you must first complete upgrading the operating
system, and then install the LMS 4.0.x Windows 2008 R2 patch.
* You can install the LMS 4.0.x Windows 2008 R2 patch only on LMS 4.0.x
and not on the lower version of LMS.
* You cannot install Integration Utility and HP Open View 7.x or 8.x on
Windows 2008 or Windows 2008 R2 servers.
Check out:
System and Browser Requirements for Server and Client
LMS Patches-Windows -
Data error (cyclic redundancy check) when installing windows xp..
hi guys.. i'm new here.. just switched to macdom a few days ago but unfortunately, i have been having problems trying to install windows xp with sp 2 on my system using boot camp. everytime i install it, i get to the setup screen ("39 minutes till setup rah rah rah", "windows xp is awesome because it has this cool interface etc... rah rah rah") and then the error of doom comes out -_-
the error given is;
an eror has been encountered that prevents setup from continuing
one of the components that windows needs to continue setup could not be installed
data error (cyclic redundancy check)
if you are installing from a cd, there might be a problem with the disc; try cleaning the disc or using another disc
if you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. run the disk checking utility on your installation drive from the recovery console and start setup again
press ok to view the setup log file
i have tried numerous times without fail and it is getting to my head.. gah.. if someone could help me out, it would be massive and i would sell my soul to you! (kidding).. thanks for reading!
p/s: my setup is;
Macbook
2.1ghz
1gb ram
120gb hard disk
dvd/cd-rw combo drive
the basic setup pretty much.. again.. any help would be greatly appreciated. thank you so much guys!I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?
-
iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2. -
I'm running Vista for operating system on an HP laptop that's about 2 years old. I've installed all current updates.
I've always used Firefox. It started crashing and creating processes but not launching. Went to support and scoped it out -- there was a lock file my profile directory. I deleted it, and Firefox started loading.
Used it a few times -- closed the app each time on exist as per suggestions on support site info. One time -- back to square one, wouldn't load, just created a process. Reboot, ending process, checking for lock file, reinstalling -- all unsucessful.Brian
Below is from using a SIP build. It does offer G722, but it's way down on the list so it's never used...
m=audio 32678 RTP/AVP 0 8 18 102 9 116 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 L16/16000
a=rtpmap:9 G722/8000
a=rtpmap:116 iLBC/8000
a=fmtp:116 mode=20
a=rtpmap:101 telephone-event/8000
Taking Sreekanth's suggestion to try a Skinny build, I get the following when I make a call. It offers codecs in the order I SET THEM AND ONLY THE CODECS I SET! YAY!
m=audio 19374 RTP/AVP 9 0 101
a=rtpmap:9 G722/8000
a=fmtp:9 bitrate=64
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
Using a Skinny build on the phones also solved other issues. The phones use G711 when the whole path supports G711 and G722 when the whole path supports G722. It doesn't always use G722 and rely on transcoding for the call paths that can't use it. It's fantastic.. The phones also receive the QoS tagging that I set and that seems to result in better audio quality than on the SIP builds, which never did get those settings. Finally, it even solved a slow Exchange 2013 answer issue I have been experiencing for quite some time. I practically fell out of my chair when I saw everything that was fixed just by switching...
Cisco, PLEASE FIX YOUR SIP BUILDS! It's insane how the SCCP builds work perfectly and the SIP builds don't, especially with how much these phones cost.. I was thinking of possibly acquiring some 9951s, which are SIP only. I'm a little leery about that at this point. If they have the same kinds of issues as the SIP builds for the 7975g, there's no SCCP alternative to use..
Sreekanth
Thank you for suggesting a Skinny build.. That was about the only thing I didn't try. I am happy beyond belief that this is working so well now, even though the SIP builds should be just as well developed as the SCCP ones. -
CRC missing file error when installing windows
When trying to instal windows on my Mac Pro desktop I keep getting the same error message. I must have tried it 6 times and always get the same message whether I am trying to my main disk partitioned, or to my secondary disk. It tells me to check my disk and I have, and cleaned it, plus I have ued the same disk to instal windows on my laptop Mac Pro without problems.
The message follows...
Error:
SXS.dll: syntax error in manifest or policy file "f:\i386\asms\6000\msft\windows\common\controls\controls.man" on line 4
xxx
error:
installation failed f:\i386\asms. Error message: Data error (cycle redundancy check)
xxx
fatal error:
one of the components that windows needs to continue setup could not be installed.
Data error (cycle redundancy check)
If you are installing from a CD there might be a problem with the disk; try cleaning the disk or using another disk.
Please help!
DougIt should be "Cyclic Redundancy Check" I believe. If I were you I would check the disc for scratches...etc., and even if you can't detect any that are very visible, it would still be a good idea to go out and purchase some stuff designed for fixing scratches/blemishes on CD's so you can use them again. If that doesn't work, I'm at a loss.
-
Can't open .bin file (trying to install windows media player)
I'm trying to install windows media player on my brand new macbook pro. I downloaded the .bin file and have installed Stuffit Expander. When i try to open the .bin file, stuffit opens to the progress window and tells me that its preparing but nothing happens. it just freezes on me. i've openeother .bin files with no problem. How can I open this .bin file?
macbook pro Mac OS X (10.4.8)I hope you are aware that the Windows Media Player plug-in will not work with Safari because it's not a universal binary. Furthermore, WMP is no longer supported by Microsoft for the Mac. Instead you should download and install Flip4Mac (www.versiontracker.com or www.macupdate.com.)
Although the WMP plug-in for Safari will not work on an Intel Mac, the player will work fine through the Rosetta emulator. If you are insistent upon using WMP with Safari, then after you install WMP and the plug-in, select Safari's application icon, press COMMAND-I to open the Get Info window. Check the option "Open using Rosetta." This will force Safari to run as a PPC app.
If Stuffit Expander will not open the .bin archive then check to be sure you are using the current version of it. If you continue having problems then try using TheUnarchiver instead (www.versiontracker.com or www.macupdate.com.) It's also possible you have a defective download.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)
If you are on Yosemite, and have a CoreStorage volume (the default), it is not visible on the Windows side. The Apple HFS driver cannot read CS volumes.
You can verify this by running the following command in OSX Terminal.
diskutil cs list
If you get any output, such volumes will not be visible.
As a work around, if you really need it, check the 'Revertible' value. If it is yes, you can revert it to HFS+ by using the following command
diskutil cs revert
Here is the syntax for the command. The LVUUID parameter can be seen as a long string for your Logical Volume. Do not use the Logical Volume Group or any disk UUIDs. If you need the exact command, please post the output from the diskutil cs list command?
diskutil cs revert
Usage: diskutil coreStorage revert
MountPoint|DiskIdentifier|DeviceNode|lvUUID
[-stdinpassphrase | -passphrase [passphrase] | -recoverykeychain file]
Convert a CoreStorage logical volume back to its native type.
The file system must be mounted and resizable (i.e. Journaled HFS+).
Ownership of the affected disk and a passphrase (if encrypted) is required. -
In using bootcamp to partition and install Windows on my computer, I keep hitting a snag. Message says that partitioning can not be completed because files can not be moved. I have tried several things but nothing seems to be helping to move the process along. What should I do?
Welcome to the Apple Support Communities
In most of the cases, that message appears when there's a problem with the filesystem, so you have to repair the disk. This doesn't mean that the hard drive is damaged.
First of all, open > About this Mac, and check Version. If it's 10.5 or 10.6, insert the Mac OS X DVD of the version you are using and press C key while your Mac is starting. If it's 10.7 or 10.8, press Command and R keys while your Mac is starting. After doing this:
1. Go to Utilities menu > Disk Utility (if you have 10.5 or 10.6) or open Disk Utility (10.7 and 10.8).
2. Choose Macintosh HD in the sidebar and repair the disk.
3. Restart, open Boot Camp Assistant and follow the steps to install Windows on the Mac -
Recently I had to install windows 7 in my notebook because XP doesn't have more support. Before installing I backed up all my files to my external HD. Now that I instaleed windows 7 and also installed Acrobat Reader XI, I just cannot open any of my pdf files created prior to installing windows 7.
Looking for help online, I found the solution of security and giving me access as an administrator to all my files, but it still keeps the same...
Can some one please help me out?? I really need to work on many of this files ASAP.
Thank you all in advance for you attention,
Best,
HenriqueCan you start Adobe Reader?
-
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
# Question
I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
Did you try my suggestion of installing portable ESR ?
For forum cross referencing purposes
* Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
*(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
* Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
*I note this was first seen in Fx21 and is 100% Windows 7
<br />
Maybe you are looking for
-
Why are InDesign text frames uneditable, or converted to outlined objects, when opened in CS4?
When opening a CS3 Layout in CS4 to make client text changes, all the text frame box edges (on their appropriate layers) are shown as dotted lines, and none of the type is editable! I restored the old version, and opened in CS3 old version, and the s
-
So tonight I just wanted to add a simple 1 or 2 next to the powered by SUN logo in convergence. Basically if a user calls into support I want the tech to be able to ask the customer what's the number in the right hand corner. Help them troubleshoot.
-
Mountain Lion installer will not let me choose my Lion Partition as an install location
Mountain Lion installer will not let me choose my Lion Partition as an install location. Any ideas why?
-
Occi GetString causing a exception with ntdll.dll oracle 10g and MS 2005
hi, I am getting an exception with using Visual Studio 2005(VC++8) and occi.h 10g client. When I run the release version I get an exception in ntdll.dll. The problem is in the getString(). The field in the oracle table is defined as a varchar2(300).
-
Hi, I am trying to export a video in Quicktime with the mjpeg codec but it is missing from the video codec list. Can anyone help me? Kind regards Suzie