LMS 3.2 on Solaris 10 - DFM 3.2 Shows VIP as Duplicate IP
Hi,
I have a few alerts created by DFM regarding duplicate ip addresses. It happens that those duplicate ips are in reality virtual ip addresses configured on our load balancers.
Is there a way to resolve this issue?
Thanks
Jose Ribeiro
This is a known issue (CSCee02681). The only workaround is to unmanage those IP addresses that are being reported as duplicates. This can be done under DFM > Device Management > Device Details. Expand the details tree, and select the IPs that are showing up as duplicates and set their management states to false.
Similar Messages
-
LMS 3.1 on Solaris 10 - Reset all databases to initial state
Hi,
Is there a script that would clear all databases for LMS 3.1 on Solaris 10?
I imported do CS some devices from a CSV file I exported from an old LMS 2.5 server we had. I get some very strange results when I ask to sync archive for instance. The devices I manually added work fine, but the ones I imported get stuck and the job takes forever to finish (10 hours in some instances, for 230 devices).
I'd like to re-start from scratch without having to uninstall and reinstall LMS.
Thanks,
Jose Ribeiro
MGSSee this DOC for the commands to reinitialize all databases.
-
Backup problem with LMS 3.0 on Solaris
Hi All,
I'm encountering problems with LMS 3.0 when I try to do a backup. After you hit OK on the window that says "Do you want to backup now?", an error would pop up saying: "Enter a new directory name or ask the system administrator of the Ciscoworks Common Services server to make the directory accessible to user casuser", thus I cannot proceed with the backup process. When I do backup, my login privilege is admin. Even tried to do backup on the same partition as my CSCOpx directory but to no avail.
Appreciate your help on this guys. Our LMS 3.0 runs on Solaris platform. Thanks in advance.Hi Joe,
Thanks for your prompt response. By the way, what is a casuser? Is he also one of the user that can be found on the Local User Setup on Common Services? The scenario here is that, I am not the one who installed the Ciscoworks LMS 3.0 on the client side, so I am not aware on how they did the installation procedure for the application. I remember assigning casuser password during installation on our other clients that has LMS 3.0.
Will the write access on the backup directory for the casuser be done by the Solaris root administrator?
Thanks for your help. -
CISCO LMS 4.0 on solaris 10
Hello everyone my name is Eric and I have some issues with our LMS 4.0.
We have installed it on a Solaris 10 non global zone on a Solaris 11.1 server.
It runs and the webgui is accessible.
I did an export of the data from the old server and a bulk import to the new one. It ran and added the data but you don't see it in inventory, when you try to run a credential validation on any device it tells you theres nothing in the DCR. I manually added the seeds but still no joy.
I attempted to make it a slave of our old LMS 4.0 virtual installation but it didn't replicate any data.
I then attempted to restore/migrate the data from the old serve to the new one but when running the /op/CSCOpx/bin/perl /opt/CSCOpx/bin/perl/restorebackup.pl -d "backup_directory" script I recieved the:
ERROR MAXENV value reached, fix this perl wrapper!
I found nothing on a google search related to this issue with perl.
I have attempted to manually load the DCR and run discovery but when I do it only finds 6 devices 5 of which are unreachable.
I think I have exhausted all the avenues I have to get this thing up and running.
Has anyone had to migrate data from a windows base LMS 4.0 platform to a Solaris based LMS 4.0 platform?
ejLMS 4.0 will not work on Solaris 9. Solaris 10 is the only supported Solaris version these days.
-
LMS 3.2 Installation - Solaris 10/09 Patch Conflict:
Hello all,
We are running Sun Solaris 10/09,working on installing LMS 3.2.As per documentation,attempted to install the two recommended patches,127127-11 and 122032-05.
The 127127-11 patch is already contained in this OS packaging.The second recommended patch - 122032-05 - does not install since there exists another patch - 141518-11 - that makes the second recommended patch(122032-05) obsolete.
The 141518-11 patch cannot be uninstalled since there is no backout data for it.
What do you recommend I do to solve this issue as I cannot move ahead with the installation as things stand.
Should I use an older release of Solaris 10 that is still downloadable from the Sun Website?If so,can anyone recommend a tried and tested release I can use.
Many thanks,
W.Hi all,
Just resifted through the documentation and they have stated the supported releases:
"The following Solaris 10 releases are supported in LMS 3.2:
–Solaris 10, 05/09 release
–Solaris 10, 10/08 release
–Solaris 10, 05/08 release
–Solaris 10, 08/07 release
–Solaris 10, 11/06 release"
Will give the installation a shot with 10/08.
Regards,
W. -
LMS 4.2.2 DFM still not possible to disable Duplicate IP false positives?
I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints!I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints! -
Hi,
We are using LMS 3.2 in Sun platform.In which directory LMS archiving the configuration files of all the routers,under shadow directory i am able to find few routers configuration and also i need to have date wise configuration.Through GUI in version tree am able to find the configuration.
I enabled data collection one day once.
Please guide me for this
Regards,BalaHi Bala,
Yes you are right the Location of the backup configuration files on solaris is:
On Solaris, /var/adm/CSCOpx/files/rme/dcma/shadow
In this location as soon as cisco works found a change in your device configuration it will backup the configuration file in this location itself.
Configuration backup is not a part of DataCollection.
You need to configure the SYNC-ARCHIVE job (RME > config mgmt ) for archive collection \ configuration backup.
I hope this will help..
Thanks
Afroj -
LMS License error only with DFM
We are getting a license error only with DFM; we already checked the license file and its showing the DFM(2.0) license is for ever. Tried rebooting the server and restarting the DFM service/Mgr daemon.
Anybody has any idea why this is happening?DFM license popup was a pre-LMS3.0 feature used by Cisco to validate "proof of purchase" of earlier product for customers who obtained an upgrade version of the newer software (LMS 2.5/2.6).
If your original purchase was an upgrade from a previous product then you must also run the dfmValidateUpgrade.bat file located in NMSROOT\bin directory , you will need to locate the previous DFM cd and place it in the CDROM drive.
There is also a validateupgrade executable for the RME package which requires similar validation.
It may be possible you upgraded from a product that did not support DFM, in which case you do not have the CD and as such are not entitled through the upgrade license for that product.
Additionaly, here are steps to reapply your license:
Try this procedure for installing the license file.
Be sure you have the license files from www.cisco.com/go/license using your PAK number it will generate an email with the files needed.
Open a DOS shell and issue the command:
> \progra~1\CSCOpx\bin\pdterm LicenseServer
validate with
> \progra~1\CSCOpx\bin\pdshow
Go to \progra~1\CSCOpx\etc\license
NOTE: You may want to back these files up before proceeding (copy *.lic to \temp or some other directory)
Delete all *.lic files (NOTE: QPM/LMS/CUOM***.lic file should not be copied to this directory directly. If it is there, move it to some other directory)
Back to the dos shell and issue the command:
> \progra~1\CSCOpx\bin\pdexec LicenseServer
Update the QPM/LMS/CUOM**.lic file from the GUI from
CS -> Server -> Admin -> Licensing
(The LMS**.lic should be in some other directory other than
\progra~1\CSCOpx\bin\etc\licenses and must have read permission for casuser)
Close all the browser sessions and open a new browser and launch the CiscoWorks and check for the popup message.
Also notice LMS 2.6 and earlier products are no longer supported by the TAC.
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_end-of-life_notice0900aecd80532c07.html -
LMS 3.2 on Solaris 10 - Cannot tftp vlan.dat to server
Hi All,
I've read several posts and could not find one that would resolve my issue.
I get the partially successful on several switches. I understand that is because of LMS not being able to tftp vlan.dat back to server.
I tried it directly on a switch and the transfer only works if the filename is already created in the tftp directory. Is there a way to change that?
Thanks
Jose RibeiroHi Joseph,
The ciscoworks server has full access to the switch as per below. Neither access nor credentials seem to be the issue here.
I've read a few posts where it was stated the need to create a 'dummy' vlan.dat file so that the device would not show as partially successful on the RME job. Is this the case here? If so this is a very strange solution.
Thanks,
Jose
-bash-3.00$ ssh [email protected]
[email protected]'s password:
CC
WARNING: This system is for authorized use only. Any or all access to or
uses of this system may be monitored and recorded and subject to audit.
Use of this system is expressed consent to such monitoring and recording.
Unauthorized or improper use of this system is prohibited and is subject
to criminal and civil penalties.
ctspotdcemsw302>ena
Password:
ctspotdcemsw302#
ctspotdcemsw302#sh ver
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-ENTSERVICESK9_WAN-M), Version 12.2(18)SXF1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 20-Dec-05 19:11 by kellmill
Image text-base: 0x40101040, data-base: 0x42D60000
ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-ENTSERVICESK9_WAN-M), Version 12.2(18)SXF1, RELEASE SOFTWARE (fc1)
ctspotdcemsw302 uptime is 3 years, 28 weeks, 3 hours, 16 minutes
Time since ctspotdcemsw302 switched to active is 3 years, 28 weeks, 3 hours, 35 minutes
System returned to ROM by power cycle at 17:32:48 UTC Wed Jan 11 2006 (SP by power on)
System restarted at 05:35:07 EST Sun Feb 25 2007
System image file is "disk0:/s72033-entservicesk9_wan-mz.122-18.SXF1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C6509-E (R7000) processor (revision 1.1) with 458720K/65536K bytes of memory.
Processor board ID SMG0832N2ZV
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
15 Virtual Ethernet/IEEE 802.3 interfaces
266 Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
ctspotdcemsw302#exit
Connection to 10.86.109.3 closed by remote host.
Connection to 10.86.109.3 closed.
-bash-3.00$ -
LMS 3.2 on Solaris 10 - New devices and RME archive job
Hi All,
I've created a RME job that archive syncs our devices. When I add new devices to Common Services, which updates RME, will those new devices have their configurations archived by that same RME job, or do I need to create a new job?
When the existing job was created the option "All Devices" was selected.
Thanks,
Jose RibeiroHi Jose,
If you really wants to track the devices configuration with the help of RME Jobs ( sometimes for auditing purpose we have to have a job ), then you can schedule a job as well but with the option Group Selector like (Select A Layer: Device SelectorGroup Selector ). You can see this option at the very top while creating the job. If you select this option, the membership of the group is dynamic in nature i.e this job will run on all those devices which exist in the group that you have selected at the time of running of job and not at the time of creation of job. For example, if you had created job on Normal Group of RME, then this job will attempt to take the backup of config of all those device which exist in Normal Group. So if your RME is synchronized with DCR (Common Services), and if you are adding the new device to Common Service, then you need not to add this device again for this schedule job since DCR will send this device to RME and once this device have inventory collected, it will automatically be in the normal group of RME and since we had selected Group selector option, RME will collect the config for this device too.
However periodic polling and periodic collection is also desinged to acheive the same purpose and known as kind of administrative task for managing the devices in RME.
Now the question arise what is difference between periodic polling and periodic collection :- Its very simple actually -
Periodic Polling :- Under Periodic polling, RME will first poll the device and if it find any change in the actual configuration of device with the existing configuration in RME . it will trigger collection of backup config for the device. If it will not find any difference between the actual configuration on the device and the existing configuration in RME, it will not trigger any new sync archive on the device thus save your network resources.
Periodic Collection :- Under Periodic Collection, it will not do any comparison and always trigger the sync archive on the device. However you will be able to see the new version of device configuration only when any change on the device happen since there is no point of keeping the same config many times in RME database.
Hope it answer your querries.
Thanks & Regards
Gaganjeet -
LMS 3.2 on Solaris 10 - CatOS PVlan Mapping commands to MSFC not being saved by Ciscoworks
Hi All,
We are doing some troubleshooting after the recovery of a Cat6500 Hybrid switch and we've encoutered something strange. It seems that Ciscoworks does not save the pvlan mapping statements applied to the MSFC (module 15 in this case). Below I have two excerpts. The first one is from an export of the latest saved config of a similar device. The other one is from the actual same switch.
Any ideas why this is happening?
Thanks
Jose Ribeiro
-bash-3.00$ cat ctspitdcemsw303-172-raw.cfg | grep mapping
#Macro-Port mapping
#vlan mapping
set pvlan mapping 2100 2101 1/7
set pvlan mapping 2100 2103 1/7
set pvlan mapping 2100 2104 1/7
set pvlan mapping 2100 2106 1/7
set pvlan mapping 2100 2109 1/7
set pvlan mapping 2600 2603 5/11-12
set pvlan mapping 2600 2604 5/11-12
set pvlan mapping 2800 2801 5/4
set pvlan mapping 2800 2802 5/4
set pvlan mapping 2800 2803 5/4
set pvlan mapping 2800 2804 5/4
set pvlan mapping 2800 2805 5/4
set pvlan mapping 2800 2806 5/4
set pvlan mapping 2800 2807 5/4
set pvlan mapping 2800 2808 5/4
set pvlan mapping 2800 2809 5/4
set pvlan mapping 2300 2303 9/31
set pvlan mapping 2300 2304 9/31
set pvlan mapping 2600 2603 9/28
set pvlan mapping 2600 2604 9/28
-bash-3.00$
ctspitdcemsw303> (enable) sh runn | incl mapping
set pvlan mapping 2100 2101 1/7
set pvlan mapping 2100 2103 1/7
set pvlan mapping 2100 2104 1/7
set pvlan mapping 2100 2106 1/7
set pvlan mapping 2100 2109 1/7
set pvlan mapping 2600 2603 5/11-12
set pvlan mapping 2600 2604 5/11-12
set pvlan mapping 2800 2801 5/4
set pvlan mapping 2800 2802 5/4
set pvlan mapping 2800 2803 5/4
set pvlan mapping 2800 2804 5/4
set pvlan mapping 2800 2805 5/4
set pvlan mapping 2800 2806 5/4
set pvlan mapping 2800 2807 5/4
set pvlan mapping 2800 2808 5/4
set pvlan mapping 2800 2809 5/4
set pvlan mapping 2300 2303 9/31
set pvlan mapping 2300 2304 9/31
set pvlan mapping 2600 2603 9/28
set pvlan mapping 2600 2604 9/28
set pvlan mapping 2300 2303 10/35-36
set pvlan mapping 2300 2304 10/35-36
set pvlan mapping 2300 2305 10/35-36
set pvlan mapping 2300 2309 10/35-36
set pvlan mapping 2300 2303 11/34
set pvlan mapping 2300 2304 11/34
set pvlan mapping 2600 2603 11/12-13,11/38-39
set pvlan mapping 2600 2604 11/12-13,11/38-39
set pvlan mapping 2300 2303 12/45-46
set pvlan mapping 2300 2304 12/45-46
set pvlan mapping 2600 2603 12/41-44
set pvlan mapping 2600 2604 12/41-44
set pvlan mapping 2000 2001 15/1
set pvlan mapping 2000 2002 15/1
set pvlan mapping 2000 2003 15/1
set pvlan mapping 2000 2005 15/1
set pvlan mapping 2000 2009 15/1
set pvlan mapping 2200 2201 15/1
set pvlan mapping 2200 2202 15/1
set pvlan mapping 2200 2203 15/1
set pvlan mapping 2200 2208 15/1
set pvlan mapping 2300 2301 15/1
set pvlan mapping 2300 2302 15/1
set pvlan mapping 2300 2303 15/1
set pvlan mapping 2300 2304 15/1
set pvlan mapping 2300 2305 15/1
set pvlan mapping 2300 2306 15/1
set pvlan mapping 2300 2307 15/1
set pvlan mapping 2300 2309 15/1
set pvlan mapping 2300 2312 15/1
set pvlan mapping 2500 2501 15/1
set pvlan mapping 2500 2503 15/1
set pvlan mapping 2600 2602 15/1
ctspitdcemsw303> (enable)Hi Joseph,
When I run a write term I can see the whole switch config, though in pages (I need to hit enter several time to go trhu the whole config).
ctspitdcemsw303> (enable) write terminal
This command shows non-default configurations only.
Use 'write terminal all' to show both default and non-default configurations.
begin
# ***** NON-DEFAULT CONFIGURATION *****
#time: Mon May 9 2011, 09:08:46 EDT
#version 8.5(2)
Also a View Config Raw from Device Center shows configuration up to module 10, completely missing modules 11, 12 and 15 (pvlan mappings to the MSFC).
Thanks,
Jose -
Solaris 10 - top command show only half memory
I have 64Gb of RAM but top Solaris only use 32Gb
Output from "prtdiag" command:
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
Unknown in use 1 DIMM 1A
Unknown in use 3 DIMM 2C
Unknown in use 5 DIMM 3E
Unknown in use 7 DIMM 4G
Unknown in use 1 DIMM 5A
Unknown in use 3 DIMM 6C
Unknown in use 5 DIMM 7E
Unknown in use 7 DIMM 8G
Unknown in use 2 DIMM 9B
Unknown in use 4 DIMM 10D
Unknown in use 6 DIMM 11F
Unknown in use 8 DIMM 12H
Unknown in use 2 DIMM 13B
Unknown in use 4 DIMM 14D
Unknown in use 6 DIMM 15F
Unknown in use 8 DIMM 16H
Output from "hpasmcli" command:
DIMM Configuration
Board Dimm Is Form Memory Memory Memory
Number Number Present Factor Type Size Speed Status
0 1 Yes 0x00f 0x014 4096MB 667MHz Ok
0 2 Yes 0x00f 0x014 4096MB 667MHz Ok
0 3 Yes 0x00f 0x014 4096MB 667MHz Ok
0 4 Yes 0x00f 0x014 4096MB 667MHz Ok
0 5 Yes 0x00f 0x014 4096MB 667MHz Ok
0 6 Yes 0x00f 0x014 4096MB 667MHz Ok
0 7 Yes 0x00f 0x014 4096MB 667MHz Ok
0 8 Yes 0x00f 0x014 4096MB 667MHz Ok
0 9 Yes 0x00f 0x014 4096MB 667MHz Ok
0 10 Yes 0x00f 0x014 4096MB 667MHz Ok
0 11 Yes 0x00f 0x014 4096MB 667MHz Ok
0 12 Yes 0x00f 0x014 4096MB 667MHz Ok
0 13 Yes 0x00f 0x014 4096MB 667MHz Ok
0 14 Yes 0x00f 0x014 4096MB 667MHz Ok
0 15 Yes 0x00f 0x014 4096MB 667MHz Ok
0 16 Yes 0x00f 0x014 4096MB 667MHz Ok
Total Memory: 65536 MB
:/> top
last pid: 27427; load avg: 0.21, 0.30, 0.28; up 106+11:48:10 15:47:39
147 processes: 145 sleeping, 1 zombie, 1 on cpu
CPU states: 99.5% idle, 0.1% user, 0.4% kernel, 0.0% iowait, 0.0% swap
Memory: 32G phys mem, 14G free mem, 102G total swap, 102G free swap
:/> top -v
top: version 3.6.1
:/> echo ::memstat | mdb -k
Page Summary Pages MB %Tot
Kernel 631483 2466 8%
Anon 3233838 12632 39%
Exec and libs 31475 122 0%
Page cache 690598 2697 8%
Free (cachelist) 2873644 11225 34%
Free (freelist) 924686 3612 11%
Total 8385724 32756
Physical 8176848 31940
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008I ran top on a system running Solaris 10 10/09 and the top results match prtconf's memory results.
See below.
load averages: 4.63, 4.77, 4.80 08:41:19
2188 processes:2099 sleeping, 11 zombie, 73 stopped, 5 on cpu
CPU states: % idle, % user, % kernel, % iowait, % swap
Memory: 96G real, 51G free, 36G swap in use, 91G swap free
% prtconf -v | grep Mem
Memory size: 98304 Megabytes
% top -v
top: version 3.5beta9
% cat /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
I ran top version 3.8beta1 on a Solaris 11 system and it matches phys memory size as well.
Confirm that you don't have a /etc/system setting that is constraining phys memory and that
prtconf is reporting total amount as well.
Thanks, Cindy -
please can you tell solution, im try patchadd 119254-89 output: error is /usr/lib/patch/patchadd[2]: /usr/bin/ls: not found
i want update 10_reccomented patch updates 15******** to that solaris 10 u2 kernel 11********
which error im facing is:-
standby_node#
standby_node#patchadd 119254-89
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119254-89
Checking installed patches...
/usr/lib/patch/patchadd[2]: /usr/bin/ls: not found
Patchadd is terminating.
then im trying remove following pkg in that patch 119254-89
standby_node#unzip 10_Recommended_sparc.zip
Archive: 10_Recommended_sparc.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of 10_Recommended_sparc.zip or
10_Recommended_sparc.zip.zip, and cannot find 10_Recommended_sparc.zip.ZIP, period.
standby_node#pwd
/accel
standby_node#pkgrm SUNWpkgcmdsr
The following package is currently installed:
SUNWpkgcmdsr SVr4 package commands (root)
(sparc) 11.11,REV=2005.01.09.23.05
Do you want to remove this package? [y,n,?,q] Nov 21 15:57:48 standby_node last message repeated 1 time
y
## Removing installed package instance <SUNWpkgcmdsr>
## Verifying package <SUNWpkgcmdsr> dependencies in global zone
WARNING:
The <SUNWpkgcmdsu> package depends on the package
currently being removed.
Dependency checking failed.
Do you want to continue with the removal of this package [y,n,?,q] y
## Processing package information.
## Removing pathnames in class <none>
/var/spool/pkg
/var/spool <shared pathname not removed>
/var/sadm/security
/var/sadm/pkg <non-empty directory not removed>
/var/sadm/install/logs <non-empty directory not removed>
/var/sadm/install/admin/default
/var/sadm/install/admin
/var/sadm/install <non-empty directory not removed>
/var/sadm <shared pathname not removed>
/var <shared pathname not removed>
## Updating system information.
Removal of <SUNWpkgcmdsr> was successful.
actually i want to updates patch 10_recommented to that server solaris 10 u2 current kernel 11****** for this purpose only i do all those thing.
standby_node#unzip 10_Recommended_sparc.zip
Archive: 10_Recommended_sparc.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of 10_Recommended_sparc.zip or
10_Recommended_sparc.zip.zip, and cannot find 10_Recommended_sparc.zip.ZIP, period.
standby_node#pwd
standby_node#patchadd 119254-89
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SUNWpkgcmdsr from directory SUNWpkgcmdsr in patch 119254-89 is not installed on the system. Changes for package SUNWpkgcmdsr will not be applied to the system.
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119254-89
Checking installed patches...
Patchadd is terminating.
my motive is to updates patch kernel 11***** to 15***********
please can you anyone give solution for this.
by Ragavanthanks, but now iam facing new issue i dont know why it happen....
standby_node#./installpatchset --s10patchset
Setup ...
Recommended OS Patchset Solaris 10 SPARC (2014.05.16)
Patch 118833-36 will be applied shortly. Installation of the patch set will
halt after this patch is applied, and it will be necessary to reboot before
installation of the patch set can continue.
Application of patches started : 2014.11.25 14:53:01
Applying 120900-04 ( 1 of 377) ... skipped
Applying 121133-02 ( 2 of 377) ... skipped
Applying 119254-89 ( 3 of 377) ... skipped
Applying 119317-01 ( 4 of 377) ... skipped
Applying 121296-01 ( 5 of 377) ... skipped
Applying 138215-01 ( 6 of 377) ... skipped
Applying 148336-01 ( 7 of 377) ... skipped
Applying 146054-07 ( 8 of 377) ... skipped
Applying 142251-02 ( 9 of 377) ... skipped
Applying 125555-15 ( 10 of 377) ... skipped
Applying 118367-04 ( 11 of 377) ... skipped
Applying 118666-65 ( 12 of 377) ... skipped
Applying 118667-65 ( 13 of 377) ... skipped
Applying 118705-02 ( 14 of 377) ... skipped
Applying 118706-01 ( 15 of 377) ... skipped
Applying 118707-05 ( 16 of 377) ... skipped
Applying 118708-19 ( 17 of 377) ... skipped
Applying 118711-03 ( 18 of 377) ... skipped
Applying 118712-23 ( 19 of 377) ... skipped
Applying 118718-06 ( 20 of 377) ... skipped
Applying 118777-16 ( 21 of 377) ... skipped
Applying 121181-05 ( 22 of 377) ... skipped
Applying 118918-24 ( 23 of 377) ... skipped
Applying 138217-01 ( 24 of 377) ... skipped
Applying 119578-30 ( 25 of 377) ... skipped
Applying 140860-02 ( 26 of 377) ... skipped
Applying 121453-02 ( 27 of 377) ... skipped
Applying 121453-02 ( 28 of 377) ... skipped
Applying 121118-19 ( 29 of 377) ... skipped
Applying 118833-36 ( 30 of 377) ... skipped
Applying 118945-01 ( 31 of 377) ... skipped
Applying 118981-03 ( 32 of 377) ... skipped
Applying 119059-66 ( 33 of 377) ... skipped
Applying 119063-01 ( 34 of 377) ... skipped
Applying 119081-25 ( 35 of 377) ... skipped
Applying 119115-35 ( 36 of 377) ... skipped
Applying 119117-52 ( 37 of 377) ... skipped
Applying 119130-33 ( 38 of 377) ... skipped
Applying 119213-27 ( 39 of 377) ... skipped
Applying 119246-39 ( 40 of 377) ... skipped
Applying 124628-10 ( 41 of 377) ... skipped
Applying 119252-29 ( 42 of 377) ... skipped
Applying 123611-04 ( 43 of 377) ... skipped
Applying 119280-25 ( 44 of 377) ... skipped
Applying 119278-38 ( 45 of 377) ... skipped
Applying 119282-01 ( 46 of 377) ... skipped
Applying 119309-03 ( 47 of 377) ... skipped
Applying 140899-01 ( 48 of 377) ... skipped
Applying 119313-42 ( 49 of 377) ... skipped
Applying 124188-03 ( 50 of 377) ... skipped
Applying 119315-19 ( 51 of 377) ... skipped
Applying 120199-15 ( 52 of 377) ... skipped
Applying 119534-29 ( 53 of 377) ... skipped
Applying 119538-19 ( 54 of 377) ... skipped
Applying 120099-08 ( 55 of 377) ... skipped
Applying 119546-08 ( 56 of 377) ... skipped
Applying 119548-14 ( 57 of 377) ... skipped
Applying 119648-03 ( 58 of 377) ... skipped
Applying 120272-31 ( 59 of 377) ... skipped
Applying 122640-05 ( 60 of 377) ... skipped
Applying 126897-02 ( 61 of 377) ... skipped
Applying 127755-01 ( 62 of 377) ... skipped
Applying 125503-02 ( 63 of 377) ... skipped
Applying 118731-01 ( 64 of 377) ... skipped
Applying 124204-04 ( 65 of 377) ... skipped
Applying 122660-10 ( 66 of 377) ... skipped
Applying 125547-02 ( 67 of 377) ... skipped
Applying 140796-01 ( 68 of 377) ... skipped
Applying 120011-14 ( 69 of 377) ... skipped
Applying 139520-02 ( 70 of 377) ... skipped
Applying 119757-32 ( 71 of 377) ... skipped
Applying 119764-07 ( 72 of 377) ... skipped
Applying 119783-28 ( 73 of 377) ... skipped
Applying 119810-07 ( 74 of 377) ... skipped
Applying 119812-18 ( 75 of 377) ... skipped
Applying 119900-16 ( 76 of 377) ... skipped
Applying 119903-02 ( 77 of 377) ... skipped
Applying 119906-18 ( 78 of 377) ... skipped
Applying 119955-05 ( 79 of 377) ... skipped
Applying 119963-24 ( 80 of 377) ... skipped
Applying 119966-01 ( 81 of 377) ... skipped
Applying 119986-03 ( 82 of 377) ... skipped
Applying 120094-35 ( 83 of 377) ... skipped
Applying 120101-01 ( 84 of 377) ... skipped
Applying 120195-02 ( 85 of 377) ... skipped
Applying 120201-06 ( 86 of 377) ... skipped
Applying 120256-01 ( 87 of 377) ... skipped
Applying 120284-07 ( 88 of 377) ... skipped
Applying 120460-17 ( 89 of 377) ... skipped
Applying 119368-04 ( 90 of 377) ... skipped
Applying 120286-03 ( 91 of 377) ... skipped
Applying 120292-02 ( 92 of 377) ... skipped
Applying 120348-03 ( 93 of 377) ... skipped
Applying 121975-01 ( 94 of 377) ... skipped
Applying 120410-33 ( 95 of 377) ... skipped
Applying 120412-11 ( 96 of 377) ... skipped
Applying 120414-27 ( 97 of 377) ... skipped
Applying 120543-33 ( 98 of 377) ... skipped
Applying 120719-06 ( 99 of 377) ... skipped
Applying 120732-01 (100 of 377) ... skipped
Applying 120739-08 (101 of 377) ... skipped
Applying 120753-09 (102 of 377) ... skipped
Applying 120811-09 (103 of 377) ... skipped
Applying 120812-32 (104 of 377) ... skipped
Applying 120815-01 (105 of 377) ... skipped
Applying 120830-06 (106 of 377) ... skipped
Applying 120849-04 (107 of 377) ... skipped
Applying 120928-32 (108 of 377) ... skipped
Applying 121095-04 (109 of 377) ... skipped
Applying 121104-11 (110 of 377) ... skipped
Applying 121136-02 (111 of 377) ... skipped
Applying 121211-02 (112 of 377) ... skipped
Applying 121308-20 (113 of 377) ... skipped
Applying 121337-01 (114 of 377) ... skipped
Applying 120235-01 (115 of 377) ... skipped
Applying 121428-15 (116 of 377) ... skipped
Applying 121606-04 (117 of 377) ... skipped
Applying 121946-01 (118 of 377) ... skipped
Applying 122031-01 (119 of 377) ... skipped
Applying 122212-46 (120 of 377) ... skipped
Applying 122259-06 (121 of 377) ... skipped
Applying 122470-03 (122 of 377) ... skipped
Applying 122472-07 (123 of 377) ... skipped
Applying 122911-33 (124 of 377) ... skipped
Applying 123003-04 (125 of 377) ... skipped
Applying 124171-07 (126 of 377) ... skipped
Applying 123630-03 (127 of 377) ... skipped
Applying 123005-07 (128 of 377) ... skipped
Applying 123252-01 (129 of 377) ... skipped
Applying 123301-01 (130 of 377) ... skipped
Applying 123358-02 (131 of 377) ... skipped
Applying 123526-01 (132 of 377) ... skipped
Applying 123590-12 (133 of 377) ... skipped
Applying 123893-77 (134 of 377) ... skipped
Applying 123938-02 (135 of 377) ... skipped
Applying 124149-16 (136 of 377) ... skipped
Applying 124325-01 (137 of 377) ... skipped
Applying 124393-11 (138 of 377) ... skipped
Applying 124397-02 (139 of 377) ... skipped
Applying 124457-02 (140 of 377) ... skipped
Applying 124630-42 (141 of 377) ... skipped
Applying 124939-05 (142 of 377) ... skipped
Applying 124997-01 (143 of 377) ... skipped
Applying 125075-01 (144 of 377) ... skipped
Applying 125136-75 (145 of 377) ... skipped
Applying 125137-75 (146 of 377) ... skipped
Applying 125215-04 (147 of 377) ... skipped
Applying 125279-05 (148 of 377) ... skipped
Applying 125332-24 (149 of 377) ... skipped
Applying 125505-01 (150 of 377) ... skipped
Applying 125533-17 (151 of 377) ... skipped
Applying 125670-04 (152 of 377) ... skipped
Applying 125719-42 (153 of 377) ... skipped
Applying 125725-03 (154 of 377) ... skipped
Applying 125731-11 (155 of 377) ... skipped
Applying 125891-01 (156 of 377) ... skipped
Applying 126119-02 (157 of 377) ... skipped
Applying 126206-10 (158 of 377) ... skipped
Applying 126363-08 (159 of 377) ... skipped
Applying 126365-16 (160 of 377) ... skipped
Applying 126425-01 (161 of 377) ... skipped
Applying 126440-01 (162 of 377) ... skipped
Applying 126540-02 (163 of 377) ... skipped
Applying 126546-04 (164 of 377) ... skipped
Applying 126868-04 (165 of 377) ... skipped
Applying 127127-11 (166 of 377) ... skipped
Applying 127724-02 (167 of 377) ... skipped
Applying 127752-01 (168 of 377) ... skipped
Applying 127872-02 (169 of 377) ... skipped
Applying 128292-01 (170 of 377) ... skipped
Applying 128298-02 (171 of 377) ... skipped
Applying 128310-01 (172 of 377) ... skipped
Applying 128332-01 (173 of 377) ... skipped
Applying 136882-03 (174 of 377) ... skipped
Applying 136998-10 (175 of 377) ... skipped
Applying 137000-08 (176 of 377) ... skipped
Applying 137004-09 (177 of 377) ... skipped
Applying 137032-01 (178 of 377) ... skipped
Applying 137080-07 (179 of 377) ... skipped
Applying 137090-02 (180 of 377) ... skipped
Applying 137093-01 (181 of 377) ... skipped
Applying 137097-02 (182 of 377) ... skipped
Applying 137102-01 (183 of 377) ... skipped
Applying 137115-01 (184 of 377) ... skipped
Applying 138866-03 (185 of 377) ... skipped
Applying 137137-09 (186 of 377) ... skipped
Applying 137147-07 (187 of 377) ... skipped
Applying 137282-01 (188 of 377) ... skipped
Applying 137321-02 (189 of 377) ... skipped
Applying 137871-02 (190 of 377) ... skipped
Applying 138096-02 (191 of 377) ... skipped
Applying 138181-01 (192 of 377) ... skipped
Applying 138195-04 (193 of 377) ... skipped
Applying 138245-01 (194 of 377) ... skipped
Applying 138247-01 (195 of 377) ... skipped
Applying 138361-01 (196 of 377) ... skipped
Applying 138647-01 (197 of 377) ... skipped
Applying 138649-01 (198 of 377) ... skipped
Applying 138766-01 (199 of 377) ... skipped
Applying 138822-12 (200 of 377) ... skipped
Applying 138824-12 (201 of 377) ... skipped
Applying 138826-12 (202 of 377) ... skipped
Applying 138852-01 (203 of 377) ... skipped
Applying 138854-01 (204 of 377) ... skipped
Applying 138876-01 (205 of 377) ... skipped
Applying 139099-04 (206 of 377) ... skipped
Applying 139289-02 (207 of 377) ... skipped
Applying 139291-02 (208 of 377) ... skipped
Applying 141016-01 (209 of 377) ... skipped
Applying 139555-08 (210 of 377) ... skipped
Applying 139615-01 (211 of 377) ... skipped
Applying 139620-01 (212 of 377) ... skipped
Applying 139962-02 (213 of 377) ... skipped
Applying 139980-01 (214 of 377) ... skipped
Applying 139986-01 (215 of 377) ... skipped
Applying 140455-01 (216 of 377) ... skipped
Applying 140912-01 (217 of 377) ... skipped
Applying 141032-01 (218 of 377) ... skipped
Applying 141104-04 (219 of 377) ... skipped
Applying 142292-01 (220 of 377) ... skipped
Applying 141444-09 (221 of 377) ... skipped
Applying 141496-01 (222 of 377) ... skipped
Applying 141532-04 (223 of 377) ... skipped
Applying 141548-01 (224 of 377) ... skipped
Applying 141558-01 (225 of 377) ... skipped
Applying 141586-01 (226 of 377) ... skipped
Applying 142049-01 (227 of 377) ... skipped
Applying 142088-02 (228 of 377) ... skipped
Applying 142234-01 (229 of 377) ... skipped
Applying 142240-01 (230 of 377) ... skipped
Applying 142244-02 (231 of 377) ... skipped
Applying 142340-02 (232 of 377) ... skipped
Applying 142373-02 (233 of 377) ... skipped
Applying 142394-01 (234 of 377) ... skipped
Applying 142397-01 (235 of 377) ... skipped
Applying 142428-02 (236 of 377) ... skipped
Applying 142430-01 (237 of 377) ... skipped
Applying 142529-01 (238 of 377) ... skipped
Applying 142543-01 (239 of 377) ... skipped
Applying 142911-01 (240 of 377) ... skipped
Applying 142933-05 (241 of 377) ... skipped
Applying 142909-17 (242 of 377) ... skipped
Applying 143317-03 (243 of 377) ... skipped
Applying 143502-01 (244 of 377) ... skipped
Applying 143506-07 (245 of 377) ... skipped
Applying 143527-01 (246 of 377) ... skipped
Applying 143609-03 (247 of 377) ... skipped
Applying 144526-02 (248 of 377) ... skipped
Applying 144500-19 (249 of 377) ... skipped
Applying 143643-08 (250 of 377) ... skipped
Applying 143651-01 (251 of 377) ... skipped
Applying 144664-01 (252 of 377) ... skipped
Applying 143725-02 (253 of 377) ... skipped
Applying 143727-02 (254 of 377) ... skipped
Applying 143731-01 (255 of 377) ... skipped
Applying 143733-01 (256 of 377) ... skipped
Applying 143739-01 (257 of 377) ... skipped
Applying 143954-04 (258 of 377) ... skipped
Applying 144047-01 (259 of 377) ... skipped
Applying 144106-01 (260 of 377) ... skipped
Applying 144112-02 (261 of 377) ... skipped
Applying 144188-02 (262 of 377) ... skipped
Applying 144325-01 (263 of 377) ... skipped
Applying 144327-02 (264 of 377) ... skipped
Applying 144455-01 (265 of 377) ... skipped
Applying 144486-05 (266 of 377) ... skipped
Applying 144492-01 (267 of 377) ... skipped
Applying 144569-01 (268 of 377) ... skipped
Applying 147002-01 (269 of 377) ... skipped
Applying 144872-03 (270 of 377) ... skipped
Applying 144909-03 (271 of 377) ... skipped
Applying 144911-02 (272 of 377) ... skipped
Applying 144994-02 (273 of 377) ... skipped
Applying 144996-02 (274 of 377) ... skipped
Applying 145006-04 (275 of 377) ... skipped
Applying 145023-01 (276 of 377) ... skipped
Applying 147217-02 (277 of 377) ... skipped
Applying 145080-13 (278 of 377) ... skipped
Applying 145096-03 (279 of 377) ... skipped
Applying 145120-01 (280 of 377) ... skipped
Applying 145200-13 (281 of 377) ... skipped
Applying 145929-05 (282 of 377) ... skipped
Applying 145953-07 (283 of 377) ... skipped
Applying 147442-01 (284 of 377) ... skipped
Applying 147147-26 (285 of 377) ... skipped
Applying 147143-17 (286 of 377) ... skipped
Applying 146334-01 (287 of 377) ... skipped
Applying 146489-06 (288 of 377) ... skipped
Applying 146582-04 (289 of 377) ... skipped
Applying 146673-01 (290 of 377) ... skipped
Applying 146679-01 (291 of 377) ... skipped
Applying 146681-02 (292 of 377) ... skipped
Applying 146683-01 (293 of 377) ... skipped
Applying 146694-02 (294 of 377) ... skipped
Applying 146834-02 (295 of 377) ... skipped
Applying 146954-03 (296 of 377) ... skipped
Applying 147023-01 (297 of 377) ... skipped
Applying 147194-03 (298 of 377) ... skipped
Applying 147227-01 (299 of 377) ... skipped
Applying 147272-01 (300 of 377) ... skipped
Applying 147378-01 (301 of 377) ... skipped
Applying 147673-08 (302 of 377) ... skipped
Applying 147692-55 (303 of 377) ... skipped
Applying 147693-55 (304 of 377) ... skipped
Applying 147793-12 (305 of 377) ... skipped
Applying 147797-04 (306 of 377) ... skipped
Applying 147805-01 (307 of 377) ... skipped
Applying 147992-06 (308 of 377) ... skipped
Applying 148002-01 (309 of 377) ... skipped
Applying 148004-01 (310 of 377) ... skipped
Applying 148006-01 (311 of 377) ... skipped
Applying 148027-03 (312 of 377) ... skipped
Applying 148049-04 (313 of 377) ... skipped
Applying 148071-12 (314 of 377) ... skipped
Applying 148104-11 (315 of 377) ... skipped
Applying 148112-02 (316 of 377) ... skipped
Applying 148135-01 (317 of 377) ... skipped
Applying 148165-02 (318 of 377) ... skipped
Applying 148241-02 (319 of 377) ... skipped
Applying 148322-07 (320 of 377) ... skipped
Applying 148324-06 (321 of 377) ... skipped
Applying 148342-06 (322 of 377) ... skipped
Applying 148383-01 (323 of 377) ... skipped
Applying 148403-01 (324 of 377) ... skipped
Applying 148407-01 (325 of 377) ... skipped
Applying 148412-02 (326 of 377) ... skipped
Applying 148423-01 (327 of 377) ... skipped
Applying 148559-08 (328 of 377) ... skipped
Applying 148561-06 (329 of 377) ... skipped
Applying 148565-01 (330 of 377) ... skipped
Applying 148625-01 (331 of 377) ... skipped
Applying 148657-01 (332 of 377) ... skipped
Applying 148693-01 (333 of 377) ... skipped
Applying 148768-01 (334 of 377) ... skipped
Applying 148870-01 (335 of 377) ... skipped
Applying 150435-01 (336 of 377) ... skipped
Applying 148888-05 (337 of 377) ... skipped
Applying 148948-01 (338 of 377) ... skipped
Applying 148975-01 (339 of 377) ... skipped
Applying 149067-01 (340 of 377) ... skipped
Applying 149071-01 (341 of 377) ... skipped
Applying 149075-01 (342 of 377) ... skipped
Applying 149108-01 (343 of 377) ... skipped
Applying 149112-01 (344 of 377) ... skipped
Applying 149149-01 (345 of 377) ... skipped
Applying 149163-01 (346 of 377) ... skipped
Applying 149165-01 (347 of 377) ... skipped
Applying 149279-02 (348 of 377) ... skipped
Applying 121081-08 (349 of 377) ... skipped
Applying 149453-02 (350 of 377) ... skipped
Applying 149483-01 (351 of 377) ... skipped
Applying 149638-02 (352 of 377) ... skipped
Applying 149646-02 (353 of 377) ... skipped
Applying 149648-03 (354 of 377) ... skipped
Applying 150025-01 (355 of 377) ... skipped
Applying 150400-11 (356 of 377) ... skipped
Applying 150031-05 (357 of 377) ... skipped
Applying 150107-02 (358 of 377) ... skipped
Applying 150113-02 (359 of 377) ... skipped
Applying 150123-01 (360 of 377) ... skipped
Applying 150157-01 (361 of 377) ... skipped
Applying 150180-01 (362 of 377) ... skipped
Applying 150307-01 (363 of 377) ... skipped
Applying 150310-01 (364 of 377) ... skipped
Applying 150312-04 (365 of 377) ... skipped
Applying 150383-02 (366 of 377) ... skipped
Applying 150534-01 (367 of 377) ... skipped
Applying 150535-01 (368 of 377) ... skipped
Applying 150537-01 (369 of 377) ... skipped
Applying 150539-01 (370 of 377) ... skipped
Applying 150616-01 (371 of 377) ... skipped
Applying 150618-02 (372 of 377) ... skipped
Applying 150631-02 (373 of 377) ... skipped
Applying 150756-03 (374 of 377) ... skipped
Applying 150836-01 (375 of 377) ... skipped
Applying 150840-01 (376 of 377) ... skipped
Applying 151145-01 (377 of 377) ... skipped
Application of patches finished : 2014.11.25 15:06:13
Following patches were skipped :
Patches already applied
120900-04 121453-02 119282-01 120256-01 120849-04
121133-02 121453-02 122640-05 119368-04 121337-01
119254-89 118945-01 118731-01 121975-01 120235-01
121296-01 118981-03 119986-03 120732-01 121946-01
118706-01 119063-01 120101-01
Patches not applicable to packages on the system
119317-01 119906-18 124939-05 138826-12 145200-13
138215-01 119955-05 124997-01 138852-01 145929-05
148336-01 119963-24 125136-75 138854-01 147442-01
146054-07 119966-01 125137-75 139099-04 146673-01
142251-02 120094-35 125215-04 139289-02 146679-01
125555-15 120195-02 125279-05 139291-02 147023-01
118367-04 120201-06 125332-24 141016-01 147227-01
118666-65 120284-07 125505-01 139615-01 147272-01
118667-65 120460-17 125533-17 139620-01 147378-01
118705-02 120286-03 125670-04 139986-01 147673-08
118707-05 120292-02 125725-03 140455-01 147692-55
118708-19 120348-03 125731-11 141032-01 147693-55
118711-03 120412-11 125891-01 141104-04 147992-06
118712-23 120414-27 126119-02 142292-01 148002-01
118718-06 120543-33 126363-08 141496-01 148004-01
118777-16 120719-06 126365-16 141558-01 148006-01
121181-05 120739-08 126425-01 142049-01 148135-01
118918-24 120753-09 126440-01 142088-02 148322-07
138217-01 120811-09 126540-02 142234-01 148324-06
119578-30 120812-32 126546-04 142244-02 148342-06
140860-02 120815-01 126868-04 142373-02 148383-01
121118-19 120830-06 127752-01 142529-01 148423-01
119059-66 120928-32 127872-02 142911-01 148559-08
119081-25 121095-04 128292-01 142933-05 148565-01
119115-35 121104-11 128298-02 143502-01 148625-01
119117-52 121211-02 136882-03 143527-01 148768-01
119213-27 121606-04 136998-10 143643-08 148870-01
119246-39 122031-01 137000-08 143651-01 150435-01
123611-04 122212-46 137004-09 144664-01 148975-01
119309-03 122259-06 137080-07 143725-02 149067-01
140899-01 122470-03 137090-02 143727-02 149071-01
119313-42 122472-07 137093-01 143731-01 149075-01
124188-03 122911-33 137097-02 143733-01 149108-01
119538-19 123003-04 137102-01 143739-01 149112-01
120099-08 124171-07 137147-07 144047-01 149149-01
119548-14 123252-01 137321-02 144112-02 149163-01
119648-03 123301-01 137871-02 144325-01 121081-08
125547-02 123358-02 138195-04 144327-02 149483-01
140796-01 123526-01 138247-01 147002-01 150031-05
139520-02 123590-12 138361-01 144994-02 150107-02
119764-07 123893-77 138647-01 144996-02 150157-01
119783-28 123938-02 138649-01 145006-04 150616-01
119810-07 124149-16 138766-01 145023-01 150618-02
119812-18 124325-01 138822-12 147217-02 150840-01
119900-16 124397-02 138824-12 145080-13 151145-01
119903-02 124457-02
Patches missing one or more required patches
118833-36 125075-01 142394-01 147143-17 148693-01
119130-33 125719-42 142397-01 146334-01 148888-05
124628-10 126206-10 142428-02 146489-06 148948-01
119252-29 127127-11 142430-01 146582-04 149165-01
119280-25 127724-02 142543-01 146681-02 149279-02
119278-38 128310-01 142909-17 146683-01 149453-02
119315-19 128332-01 143317-03 146694-02 149638-02
120199-15 137032-01 143506-07 146834-02 149646-02
119534-29 137115-01 143609-03 146954-03 149648-03
119546-08 138866-03 144526-02 147194-03 150025-01
120272-31 137137-09 144500-19 147793-12 150400-11
126897-02 137282-01 143954-04 147797-04 150113-02
127755-01 138096-02 144106-01 147805-01 150123-01
125503-02 138181-01 144188-02 148027-03 150180-01
124204-04 138245-01 144455-01 148049-04 150307-01
122660-10 138876-01 144486-05 148071-12 150310-01
120011-14 139555-08 144492-01 148104-11 150312-04
119757-32 139962-02 144569-01 148112-02 150383-02
120410-33 139980-01 144872-03 148165-02 150534-01
121136-02 140912-01 144909-03 148241-02 150535-01
121308-20 141444-09 144911-02 148403-01 150537-01
121428-15 141532-04 145096-03 148407-01 150539-01
123630-03 141548-01 145120-01 148412-02 150631-02
123005-07 141586-01 145953-07 148561-06 150756-03
124393-11 142240-01 147147-26 148657-01 150836-01
124630-42 142340-02
No patches were applied.
Install log files written :
/var/sadm/install_data/s10s_rec_patchset_short_2014.11.25_14.53.01.log
/var/sadm/install_data/s10s_rec_patchset_verbose_2014.11.25_14.53.01.log
standby_node#
standby_node#
standby_node#uname -a
SunOS standby_node 5.10 Generic_118833-17 sun4v sparc SUNW,Sun-Fire-T200
standby_node#
standby_node#
standby_node#iniy t 6
standby_node#
standby_node#
standby_node#
all patch skipped i dont why can u any solution for that??? -
Solaris 10 network status shows 'disconnected' & cannot ping out
Hi,
In my solaris 10 sparc t4-1 server, the network status shows 'disconnected'
I cannot ping to any servers in the lan.
Please help
thanksSounds like it's either infrastructure or faulty hardware. Are you sure the port is turned on that you are plugging into?
-
LMS 2.6 VG202, 202, and 224 Not showing in Topology Map!
Hello,
Would there be a reason for VG202, 204, and 224 not to show in the topology map?
I can see the devices under Device Management in RME, also can see them unde the Topology Services window, however, when the topology map comes up, I cannot see the devices in there, when I try to find them they are not listed, andn ot listed in the Device type within the VTP Domain Topology window that shows a map of the devices on our domain neither!
Do I need to download a MIB for these devices for the topology map to recognise them?
PS: The following is a list of Software Spec I have installed on our network:
LMS 2.6
CiscoWork Common Services 3.0.6
Campus Manager 4.0.13
CiscoView 6.1.5
Device Fault Manager 2.0.13
Integration Utility 1.6.0
Resource Manager Essentials 4.0.6
Many thanks,Dear Joseph,
Apologies for my late reply, I was away on Holiday.
Checking on our topology map the VG202 and 204 show as a green box with a question mark on it.
I connected to the switch that they are attached to and I can see the devices when I run the sh cdp nei command.
Any advise please?
Maybe you are looking for
-
Since going paperless, my account has been charged late payment fees. Has anyone else experienced this?
-
How to flag only ONE image when several selected in 'N' mode ?
Hi, I want to compare several images in a same serie. I select. I press N key, then I select in strip bottom bar the group of picture. I want to put a flag (or star) to only the ONE I prefer, but all pics get the flags or star... I need to take out t
-
I have installed the new Internet Explorer 7 and I have the next problem: I cannot open the links in a new window or new tab. I use getURL command with setting _blank. But the new link open the IE7 in a self window and tab. How can I open the links i
-
Please Guys! Can I control an applet via JavaScript? How???????????? Thanks Renato
-
Migrating software from G5 to Mac Pro - possible or re-install?
I'm about to set up a Mac Pro and realized I'm not sure to what extent I could just copy everything across or whether I need to re-install everything from the software disks. I'm sure there's no problem with documents etc but for the actual applicati