LMS 3.2 Out of Sync device
i have 50 ASA devices running on LMS 3.2, Whenwe run the Archive report for all the devices. We see out of 50 ASA's 8 ASA will go to Out of Sync. Can you please help me why is this happening for only for some particular devices.
Thanks
Umakanth
Hi Martin,
lst date for the Support is April 30, 2014
Kinldy check the below link :
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/end_of_life_notice_c51-627515.html
Thanks
Afroz
Similar Messages
-
Prime Infrastructure 2.1 - Out Of Sync Devices
Hi all,
We are running a Cisco Prime Infrastructure Appliance (Version 2.1) to mange/monitor/configure our wired network infrastructure. We have been able to successfully add all of the network infrastructure devices to Prime and have had relative success in image deployment, reporting etc.
However, my query is in relation to the Configuration Archives. Currently Prime is indicating that 90% of our devices are 'Out of Sync'. I know that this means that there are discrepancies between the startup and running configs. I have compared the startup and running configs on some of the affected devices and the only differences I can see were in relation to the snmp-server contact XXXX entry and the self-signed certificate entry.
Can anyone tell me how I can go about troubleshooting this or how to bring the device configurations back into sync.
Many thanks,
John PHi John,
If you navigate to Operate > Configuration Archives it will display a list of all your devices that are listed as out of sync. From here you can sort to the devices that are listed as Out of sync, select the ones that are listed as such and schedule an overwrite. There is also an option to archive immediately after it overwrites as well. It may take a bit for it to update through this page, but navigating to individual devices through device work center and clicking on the configuration archive tab, will yield that the out of sync (startup/running mismatch) message will switch to no.
Regards,
Brandon -
How to fix out of sync devices which have used 2 apple Ids?
I have been working with the iCloud help desk over the last couple days on this but let me explain the situation:
I have 2 apple IDs. one I use for iTunes access/purchases, etc. it happens to be my day to day email. the other ID happens to be associated with my mac.com email which I use for separate email purposes.
I use an ipadair, iPhone 4, mac. all are updated with most current IOS release.
The issue is the lack of synchronization between the devices. I primarily enter my contacts, calendars, reminders via my desktop mac/apple apps, i.e. ical, contacts and reminders. However when I am away from my desktop i enter via my ipadair typically. The help desk did help and we were able to sync all of them via the Mail/Contacts/Calendars setups for new entries, rather than iCloud settings and any activated syncing via iTunes. I know that there is a way to get this sorted/combined without losing any data.
What I have discovered during my discussions with the help desk, if we take the contact lists as an example, is that I have a set of contacts entered separately and perhaps synced on my iPad that are not showing up anywhere else, for example the name Mia on my iPad does not show up on my iPhone or Mac contact list.
the record counts are different, Mac contacts have 1459, iCloud apple ID 1 has 1386 and iCloud apple ID2 has 1434(each essentially are named after an email address; 1 of which is connected to my iTunes account, and although I cannot tell how many records are on my ipadair in contacts, I know that some of those contacts are different and have not synced across to my iPhone or Mac apps.
So the question is how to get them all synced(iCloud apple ID 1(primary), iCloud apple ID 2, iPad contacts, Mac contacts without losing any contacts....i'm less concerned about duplicates, because I can manually delete dupes if they occur. Just trying to get to one method of syncing....noting that when I set these up originally i used iTunes syncing and it seemed to add duplicates never was in sync and all contact list were messed up...i am sure that is because of the 2 iCloud IDs, but I do not know how to fix it so I do not lose any contacts/can clean from one source and also of course utilize syncing for calendar, reminders, etc. retaining my separate apple ID for ITunes and the other for all this synchronization.
thanks.You need to:
1) Go to appleID.apple.com, log in with [email protected], and then change the AppleID/Primary Email back to [email protected] Sign out.
2) Delete the icloud account on the iphone. Enter the password when prompted.
3) Go back to appleID.apple.com, log in with [email protected], then change the AppleID/primary email back to [email protected] -
Hello
I allways have out-of-sync device.
I Have LMS3.2 with RME 4.3.1
Although, I configured "exclude command" with "ntp-clock priod .certificate. and so on." for the dev category "switch and hub".
But when I click "out of sync" it allways shows me the device ( SW 2950..SW3560 .) with difference like ntp-clock.
This happens also after a new config ftech.
Can you help me .
Rgards
Michel MisonneHello Jo
Here is my screenshot.
I noticed also that the device which are allways out-of-sync are 3560V2.
If I checked the device pakage , I have the package "Cat3560" ver 7.1
Rgds
Michel -
AirTunes to Apple TV is slightly out of sync with other AirTunes devices
I've noticed that AirTunes playback through Apple TV is slightly out of sync with the audio output from my Macbook and the AirTunes via my two Airport Express Base Stations. The audio from Apple TV is about a second delayed, causing a mismatch between AirTunes playback on the TV and my Macbook and other AirTunes devices. Thus, my Macbook and AEBSs are in harmony, but Apple TV's AirTunes is about a half-a-beat delayed.
Has anyone else noticed this problem or know of a way to remedy it?This is quite intriguing. I would expect that an amplifier would be able to decode the digital signal with no noticeable delay, otherwise DVDs etc would play with audio out of sync when using the digital output of the player. In fact, rather the opposite is true with new larger screens where it is the video that's slow and the audio needs to be delayed.
So this would point to the Apple TV's digital output being delayed vs. it's analogue output and I'm not too sure I understand why. It receives digital information over the network and then takes longer converting that to SPDIF (its digital output format) than it does converting it to analogue. Odd.
Perhaps an expert can advise us on this.
This would however explain why the Airport Express can exhibit the same problem and why some people don't experience any delay - they are probably using the analogue output of their Apple device.
What we need in iTunes when selecting devices to play from is an additional control for each with a +- setting that can adjust the delay of each output device so they can all be brought in sync. Since the delay appears to remain consistent that ought to solve the problem for everyone once and for all.
I'll try some tests of my own and see if my problem is indeed this digital delay. -
Cisco ASA go Out of Sync through Cisco works LMS 2.6
Cisco works startup/running Out of Sync on Cisco ASA.
Hi,
The problem description is a bit sparse. However it is important to note that the last day for support on LMS 2.6 was June 30, 2011.
Here is a link to the End of Life announcement. -
RME Out of Sync Partially Successfull
We recently upgraded to LMS 3.2 from 2.6, RME is reporting some devices as out of sync and details are partially successfull failing to fetch the vlan.dat. I've checked device credentials.
Here is a a snapshot of the device details from one of the devices.
Protocol ==> SSH
Selected Protocols with order ==> SSH,Telnet,TFTP,RCP
Execution Result:
RUNNING
Primary Login Succeeded
/ Primary Enable Succeeded
CM0060 PRIMARY RUNNING Config fetch SUCCESS for , version number 11 archived.
VLAN
CM0151 VLAN RUNNING Config fetch failed for Cause: Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory.Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory.
VLAN Config fetch is not supported using TFTP.
VLAN Config fetch is not supported using RCP.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
What I find strange is 'Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory.Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory'. We installed LMS in it's own directory under C:\ciscoworks\cscopx so why do only a few devices that fail look like they are pointing to the program files directory and is that the true cause ? Incidently there is a folder in there as we installed another cisco tool for upgrading access points, but I have no idea why RME wants to point there ?I uninstalled the upgrade tool wanting to see if the error msg changed and it did.....
Now it reports "CM0151 VLAN RUNNING Config fetch failed for 142.99.56.75 Cause: Couldnot create file in N/A directory.Couldnot create file in N/A directory."...
I've attached the regdaemon.xml you requested. -
CPI2.x Configuration Management and avoiding out-of-sync configs
Hi,
I did'nt found an option to can save the configs after deployment as in LMS neither as a global setting nor as a deployment task setting.
Aside letting changes unsaved is not a good network operation practice, it bring the configs in out-of-sync state at the archive.
Also "System Settings => Inventory => Enable Syslog and Traps on device" does not save the configs and bring everything into out-of-sync state in the archive.
Q1: Is it necessary to write this to all your templates, if you need to globaly enable "config save after deployment" with a "nice" scaleability?
#MODE_ENABLE
write memory
#MODE_END_ENABLE
Q2: Why are system CLI templates copy&paste protected in its content?
thx for answers,
SteffenHad to raise as an SR
-
Flash Player doesn't play smoothly and out of sync in full screen
Hello! Everyone
The flash player (11.2.202.235) does not play smoothly and in full screen audio and vidoe is out of sync. I didn't use to have any problem at all, it only started about two weeks ago and since then despite trying various things (i.e. disabling hardware excelration, uninstalling & reinstalling, trying various browsers etc.) has not resolved the issue. I don't know why it has suddenly stopped playing smoothly as I have not installed any software recently which might have cuased this.
I am using Windows XP (service pack3) and have dual partion with dual operating system (both XP). There is the same problem on both operarting system and flash player won't run smoothly on either of them. Although my computer and graphics card is quite old but the downloaded movies/DVD playback is fine even in full screen. It runs smoothly and audio&video is in sync so I don't think it could my the graphics card.
As I mentioned I have tried all the browsers but without any luck. The BBC iplayer plays ok most of the time if not in full screen but as soon as you make it full screen the vidoe is more like a slide show and very jittery and audio&video gets out of sync. Same with youtube vidoes, they play ok when not in full screen but the video in full screen does not play smoothly and audio&vidoes gets out of sync. However the ITV player & Channel 4 content on 4OD does not even play smoothly when not in full screen and the video&audio is out of sync all the time.
It would be really helpful if anyone can suggest anything to resolve this issue as I have not been able to find anything on the internet to solve the problem and its driving me up the wall. Although I have tried to include as much details as I could think of so please let me know if I have missed any details that could be crucial in order to identify the problem.
Thank you very much for reading this and taking the time to reply and your feedback.
Below is the DxDiag report for my laptop:
Time of this report: 4/22/2012, 00:15:58
Machine name: TIMES-LAPTOP
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)
Language: English (Regional Setting: English)
System Manufacturer: TimeComputers
System Model: VT8372
BIOS: Insyde Software MobilePRO BIOS Version 4.00.01
Processor: mobile AMD Athlon(tm) XP 2000+, MMX, 3DNow, ~1.7GHz
Memory: 1248MB RAM
Page File: 809MB used, 2790MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904) DX
Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
------------ DxDiag Notes ------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
-------------------- DirectX Debug Levels --------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
--------------- Display Devices ---------------
Card name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics Co., Ltd.
Chip type: S3 ProSavage DDR
DAC type: S3 SDAC
Device Key: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_83751071&REV_00
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Digital Flat Panel (1024x768) Monitor Max Res:
Driver Name: s3gnb.dll
Driver Version: 6.14.0010.0025 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/2/2004 14:02:26, 402048 bytes
WHQL Logo'd: Yes WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: s3gnbm.sys
Mini VDD Date: 3/2/2004 14:02:30, 167040 bytes
Device Identifier: {D7B75DD3-CE44-11CF-D873-7FA3A1C2CB35}
Vendor ID: 0x5333
Device ID: 0x8D04
SubSys ID: 0x83751071
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_A ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled DDraw
Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
------------- Sound Devices -------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_83751071&REV_50
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Other Files:
Driver Provider: VIA Technologies, Inc.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 48000 Static/Strm
HW Mix Bufs: 1, 0 Static/Strm
HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No EAX(tm) 2.0
Listen/Src: No, No I3DL2(tm)
Listen/Src: No, No Sensaura(tm)
ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
--------------------- Sound Capture Devices ---------------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
----------- DirectMusic -----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Vinyl AC'97 Audio (WAVE), Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: Not run
------------------- DirectInput Devices -------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
----------- USB Devices -----------
+ USB Root Hub |
Vendor/Product ID: 0x1106, 0x3038 |
Matching Device ID: usb\root_hub |
Service: usbhub |
Driver: usbhub.sys, 4/13/2008 19:45:37, 59520 bytes |
Driver: usbd.sys, 8/23/2001 13:00:00, 4736 bytesWould you mind opening a new bug on this at bugbase.adobe.com? Please include your dxdiag report, a specific URL and a link to this forum thread.
In the meantime, you might want to try our 11.3 beta or rollback to a previous version of the player to see if that resolves the problem.
Thanks,
Chris -
I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
my apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. the only way to unfreeze it is by detatching the ipod or resetting with menu/centre (until it loads up again, where it immediately unfreezes and comes up with a load of messages saying "cannot read iPod" and when i try and restore it by pressing menu/centre button while it's plugged in, it says "cannot restore as it is being used by another program" or "error 1415". Any ideas how to sort this out? hope i haven't majorly screwed it up. thanks.
Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.
-
How do I fix out of sync audio and video on my ipad2?
How do I fix out of sync audio and video on my ipad2? The version is iOS 7.1.2
In what app?
Have you restarted or reset the device? -
Premiere Pro CC 2014 - Video playing faster than audio - Out Of Sync?
Hi All, It's been some time since I've had to write about any problems here. Sooo, I've got Adobe Premiere Pro CC 7.2.2. (Using AJA KONA IoExpress BoB) I've imported a 5 minute AVI file (video=1920x1080, Data=65587kbps, Total=66355kbps, 30fps. - - - Audio=768kbps, Channels=Mono -and/or- Stereo, 48kHz) from my Livestream HD-500 Digital Recorder as I have been doing successfully for some time now.. . The video file plays just fine using windows media player but when I inport into a new project. The visual Video is out of sync. Seems like the Video is playing about 1/3rd faster then the normal audio. Any thoughts? - - - - - - P.S. Here is a (520mb file) public link of a 1min.40sec. Clip using GoDaddy's FileFolder:
https://files.secureserver.net/0suHs98nozqsKz
Here's a 20 second clip from last weeks trial-run-test using exact same configuration that worked just fine:
Online Storage - Download File
UPDATE - Problem Solved
So i got a call from AJA (the Manufacturer of my IoExpress Break out Box for Premiere)
Here's the Scoop:
1. When Programs "AutoUpgrade" it's common for some or all Settings to revert to their Default Settings.
2. Adobe Premiere CC auto-upgraded yesterday when I wasn't looking... (paying attenion)
3. In Premiere, Preferences>Playback>AudioDevice was reset back to "AdobeDesktopAudio".
4. I reset the reset back to AJA KONA IoExpress, and WALLA! It Works Great!
I hope this post will help others stuck in this seemingly unfixable situation. My clients will be very happy today. :-)Just for some reinforcement on this subject, these are the settings recommended by Aja for running their hardware in CC 2014:
Make sure you audio is configured like this:
1. In your MacPro System Preferences:
Set the input for Line in.
Set the output for Built in.
2. In your PremierePro Preferences:
Set the Audio Hardware for Built-in Output.
Set the Audio Output Mapping for Built-in Output.
Set the Playback for Audio Device on the KONA audio.
You will likely have to reboot after making any changes.
We are running Kona 3, 3G and I/O 4k systems and this basic setup is needed for all our systems or we have intermittent audio playback issues. -
Is out of sync audio because of Final Cut Pro X or DVD-R 8x?
Hi, I tried burning a 2 hour DVD straight from Final Cut Pro X (with it's featured menu). I used an Imation DVD-R 8x, and the burn went through successfully. However, the footage turned out pixelated and I noticed about halfway through that the audio was getting out of sync. I went back to check my sequence in FCPX to make sure I hadn't made a mistake and everything is alright. Was this an issue with the DVD I was using, or with FCPX's DVD exporting?
In FCPX, Share>DVD>Settings>Output Device>Hard Drive. That will make a disk image.
If you have iDVD, great choice. Just Share>Master File, and brong that into iDVD. The iDVD app will do the encoding and give you a disk image option as well.
Russ -
Out of sync audio six channels
Dear All,
I have not had a problem with this before, but suddenly I have out-of-sync audio when mixing six channels in FCP. Using my Canon XL1-S, I recorded 4 channels of audio in 12 bit mode, 32 khz. I then added another two channels of audio from a separate Sony digital recorder into the FCP edit. First I set the sequence settings to 32khz and ran everything in 32 bit mode, converting all of the audio through Quicktime pro. The 4 channels from the Canon XL1-s are in perfect sync, but the two channels from the Sony digital are playing at a faster speed and are drifting as the movie progresses...the length is 1:25:00. I then went back and converted everything to 48khz and changed the Sequence settings accordingly, but the Sony audio is still drifting and playing more slowly than the other two channels. What am I doing wrong and how can I bring all of the audio together? Thanks. I'm working with FCP 6.0.6 on a Mac Pro with Snow Leopard 10.6.6. Barbara SmitsHi -
Barbara Smits wrote:
I have not had a problem with this before,
meaning you have done this exact procedure successfully before?
but suddenly I have out-of-sync audio when mixing six channels in FCP. Using my Canon XL1-S, I recorded 4 channels of audio in 12 bit mode, 32 khz. I then added another two channels of audio from a separate Sony digital recorder into the FCP edit.
What is the format of these Sony files?
. . . the Sony audio is still drifting and playing more slowly than the other two channels.
Unless you are timecode locked between devices, it seems reasonable to me that there will be sync drift if the Sony external recorder is not locked to the video signal.
You might try selecting the Sony audio clips on the timeline and adjusting the speed slightly, such as 101% and see if that gets you closer to sync.
Hope this helps
MtD
Maybe you are looking for
-
I have an old dell desktop and an older ipod with my itunes library....the dell desktop is not functioning as well and have not been able to sync a newer ipod to the library .....i now have a newer Macbook air....i would like to put my library on my
-
i have hp2050 all in one j510h, two weeks ago i bought new color cartridge before installing new cartridge i easily print with black cartridge without any problem but when i installing color one every thing i want to print is really slow and uncontin
-
Debugging a ConnectionNotFoundException
hi, i'v just begun using the GCF features of J2ME (MIDP2 over CLDC1.0). i open a httpConnection using Connector.open(). the URL specified as a parameter to open() is valid and existing... i mean the link opens in a IE. but using J2ME WTK2.2, the emul
-
Does System Architect or Project leader need to know DB skill?
Hi, this question may require Experienced System architect or project leader to help me. Currently i am working as a normal programmer. I hope i can be System Architect in future (probably for J2EE platform). So, beside my system design skill, do i n
-
Hi Experts, I am using xml based Adobe forms (ordinary print form) in WebDynpro component. I got one requirement to send that form as an attachment to dynamic email id either from form or from WebDynpro component. I tried using email submit button