LMS 3.2 - RME 4.3.1 - Report Generator scheduled Syslog-Reports

Hi all,
within Report Generator in RME 4.3.1 I discovered an issue with newly added devices in scheduled Syslog Severtiy Level Summary Reports.
Settings for the report
- Device Selector: All Devices
- Data Range: 24 hours
- Schedule: daily, at xx:xxh
Our purpose for this job is to get a daily summary of syslogs of all managed devices.
But there seems to be a problem with the dynamic update of newly added devices to DCR and RME-Device-DB.
The report only creates output for all managed device at timestamp of report creation, not for newly added devices.
Is this a know bug, or is this the planned behavior?
Any suggested workarounds/fixs are appreciated.
Thanks a lot for your help.
Lothar

This is documented in the online help for the report generator, sync archive, etc. pages.
# Group Selector — To schedule a job for dynamic group of devices.
The job is scheduled only for the devices that are present in the selected group at the time when the job is run. The customizable group selector for jobs evaluates static groups also as dynamic during run time.

Similar Messages

  • How to edit a scheduled Syslog Report job in RME 4.03

    Hi
    I am using Cisco Works LMS 2.5, with RME 4.03
    There are 4 scheduled syslog report jobs that are set to run. We had a problem with syslog that meant that these reports returned zero records.
    Syslog and manual reports now work fine, but I need to edit or delete and re-create the scheduled jobs as the problem still exists with these. I'm thinking that perhaps the required devices are not selected (I had to re-build RME db from scratch recently also)
    But I cannot find them anywhere!
    All I can find in RME Jobs page is the instance of the job.
    How do I edit the main job?
    Help much appreciated
    Thanks!
    Phil

    The answer was provided by TAC.
    It's not possible to edit jobs. the ones you see in RME Jobs are the instances of the jobs.
    The only way to delete these jobs is via the CLI:
    +  Stop daemons :
    Net  stop crmdmgtd  “wait till its down”
    +  cd to C:\progra~1\CSCOpx\databases\rmeng>
    +  Issue the command :
    dbvalid  -c "uid=dba;pwd=;dbf=rmeng.db"
    example  :
    C:\Program  Files\CSCOpx\databases\rmeng>dbvalid -c "uid=dba;pwd=c2kY2k;dbf=rmeng.db"
    please  send me the results
    please  note that my RME db password is the default à c2kY2k you  have to use the correct RME pwd .
    +  Start daemons manager : net start crmdmgtd “wait till it starts  ”
    One for the library :)
    Thanks for your responses tho. cheers!

  • RME cannot generate a syslog report.

    Hi,
    I have an issue with rme 4.2 from LMS 3.1
    When I try to generate a syslog report this shows me nothing. I locate SyslogCollector.log file and I see sometnig wrong.
    SyslogCollector - [Thread: Thread-9] WARN , 28 Apr 2011 14:45:10,400, Unable to add monitor for cwkstmm2009
    SyslogCollector - [Thread: main] INFO , 09 May 2011 16:12:35,510, Logging System Initialized.
    SyslogCollector - [Thread: main] INFO , 09 May 2011 16:12:35,519, System Initialized.
    SyslogCollector - [Thread: main] WARN , 09 May 2011 16:12:40,948, Unable to resurrect connection to a subscriber.
    SyslogCollector - [Thread: main] INFO , 09 May 2011 16:12:41,027, Service started...
    SyslogCollector - [Thread: Thread-10] WARN , 09 May 2011 16:12:44,024, Unable to add monitor for cwkstmm2009
    SyslogCollector - [Thread: main] INFO , 17 May 2011 11:08:17,360, Logging System Initialized.
    SyslogCollector - [Thread: main] INFO , 17 May 2011 11:08:17,364, System Initialized.
    SyslogCollector - [Thread: main] WARN , 17 May 2011 11:08:23,433, Unable to get the filters for subscriber cwkstmm2009. Default value will be used.
    I modified Syslog.properties file to see DEBUG and this it the output
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,152, SCCleaner - About to fire close() on collector engine...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,153, SyslogCollectorEngine - Closing evaluators...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,153, FcssEvaluator - Closing LogReader...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,153, FcssEvaluator - Closing EmblemProcessor...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,154, FcssEvaluator - Releasing SyslogQueue...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,164, FcssEvaluator - Closed successfully...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,165, SyslogCollectorEngine - Closing filters...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,165, FcssFilter - Closing FilterProcessor Threads...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,165, FcssFilter - Closing Filter Store...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, FcssFilter - Closed successfully...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, SyslogCollectorEngine - Closing forwarders...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, FcssForwarder - Closing Forwarders...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, FcssForwarder - Releasing resources...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,167, FcssForwarder - Closed successfully.
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,167, SyslogCollectorEngine - Closing monitor...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,167, SyslogCollectorEngine - Closing monitor task...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,168, SyslogCollectorEngine - Closing recovery assistant...
    SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,168, SyslogCollectorEngine - Closed successfully.
    SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:05,837, Logging System Initialized.
    SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:05,840, System Initialized.
    SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:06,275, Subscriber list is empty!
    SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:10,863, Service started...
    I post the Syslog Collector Status image where it shows NOT REACHABLE.
    Can you help me, please.

    Hi,
    I have tha same problem while subscribing. it gives me the error "could not subscribe to the collector"
    Actually I want to generate Syslog and SNMP traps with Cisco lms 3.0
    please help me about the error and am i configuring the right thing for my goal ?  !!!!!
    Rizwan Haider Siddiqui.......
    [email protected]
    +92-33-44-2222-39

  • LMS 3.2: RME failed archive with Nexus 5010

    Hi,
    LMS 3.2, RME 4.3.1, dev packages updated, Windows.
    We would like to archive the configuration of the Nexus 5010 switches. Due to authentication with Radius based on tokens we're not able to use telnet/SSH and therefore we only can use SNMP WRite in combination with TFTP.  But, this is not working at all. Other systems like 3750 works fine. Is there a difference between Catalysts IOS and nexus NXOS?
    I searched the forum and found this:
    https://supportforums.cisco.com/message/663481#663481
    upgrade to LMS 2.6, archive config not working anymore
    We ship and start a TFTP server by default on Windows.  You must have an SNMP read-write community string configured on your devices, and entered in DCR for TFTP config fetches to work.  Additionally, udp/69 must be open between device and server.
    The easiest way to troubleshoot this kind of problem is to start a sniffer trace on the LMS server (using Device Center > Packet Capture).  Filter on all traffic to one of the failing devices.  Then, run a Sync Archive job for that same device.  When it fails, the sniffer trace will indicate what the problem is
    Regards
    Ad Olsthoorn

    Hi Lavramov,
    Yes I'm quite sure, I installed the required packages acoording to the Nexus.RME431.v2-2.readme.pdf manual. the manual tell me to install the following (see also attachement).
    To install the Cisco Nexus Series Package, you must install the following dependent packages:
    - SharedDcmaSS.RME431.v2-2.zip
    - SharedInventoryMDS.RME431.v1-5-1.zip
    - SharedSwimMDS9000.RME431.v1-6-1.zip
    - SharedNetshowSS.RME431.v1-1.zip
    regards
    Ad

  • Nm-nam - Failed to generate scheduled report

    Hello,
    I am using an nm-nam in a 3845 running v3.6(1b)and I receive this error: Failed to generate scheduled report for report Top Conversations when I try to run a scheduled report at a specific time of the day. I am using the external dns name of the mx record for the mail server. I receive a test email message but I do not receive the scheduled report.
    thanks

    Here is the URL for the  Creating and Viewing Reports  for the NAM
    Follow the guide it may help you
    http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/3.5/user/guide/report.html">http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/3.5/user/guide/report.html

  • EoS/EoL hardware report problem on LMS 3.2 RME 4.3.1

    Hi,
    Trying to run EoS/EoL RME reports for the first time and having problems. I have applied latest patch for CSCte717641 and this seems to have made things a little better. Originally the hardware report simply failed, but now it seems to run, but never finish. To avoid any download problems, I have manually downloaded both the EOX_SOFTWARE.ZIP and the PSIRT_EOX_OFFLINE.txt, which I have placed into the "NMSRoot\rme\jobs\inventory\reports\EOX_PSIRT\local_xml" folder. The PSIRT file has been un-compressed and put in as .txt and the EOX file has been left as a .zip. Now the report starts running, I can see it creating a temp folder in the above folder and it seems to place two files in there eos_card and eos_device, but then it appears to delete the temp folder and the job just sits at running?
    Any advice would be appreciated

    This is from the time I ran the report.
    [ Fri Feb 18 12:03:15 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,383,InventoryReportsAction Getting request params : ReportNAme: EoS/EoL Hardware ReportApp Name : null
    [ Fri Feb 18 12:03:15 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,392,Action of Filter is null
    [ Fri Feb 18 12:03:15 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,911,Generate report Request from UI
    [ Fri Feb 18 12:03:17 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,1320,Update user given cisco.com credentails
    [ Fri Feb 18 12:03:17 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.util.IRJobUtil,persistJob,201,new folder created for storing the job
    [ Fri Feb 18 12:03:18 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,45,called getCrtList to get list of Inventory Custom Templates
    [ Fri Feb 18 12:03:18 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,51,Connection is not null
    [ Fri Feb 18 12:03:18 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,70,Number of templates returning: 2
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,,246,
    Starting the JOB 3972
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1506,
    Getting the job details from persisted Job
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1528,
    Job Details : EoS/EoL Hardware Report
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1530,
    Job is custom report : false
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1532,
    Job runtype : Immediate
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1534,
    Job date : 18-2-11 12:10
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1536,
    Job description : test99
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1538,
    Job E mail id :
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1540,
    Job publish location :
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1542,
    Job template id : 0
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1544,
    Job job id : 3972
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1562,
    All the report properties read successfully from the job.
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,61,sun.misc.Launcher$AppClassLoader@92e78c
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,203,
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,294,
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,314,
    Valid License.
    Proceeding with job execution.
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,334,
    Running Report job 3972 instance id 0
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,354,inside devsel flow
    [ Fri Feb 18 12:03:27 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,558,normal3
    [ Fri Feb 18 12:03:28 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,600,successfully got predeployed devices
    [ Fri Feb 18 12:03:28 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,606,submitted.length3
    [ Fri Feb 18 12:03:29 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,generateReportData,1633,************before set device in gen rep data**********
    [ Fri Feb 18 12:03:29 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,generateReportData,1639,************after set device in gen rep data*******
    DEBUG,2011-02-18 12:03:32,250,Datagenerator class name is class com.cisco.nm.rmeng.inventory.reports.datagenerators.EOS_EOL_RDG
    DEBUG,2011-02-18 12:03:32,250,Datagenerator class instance is [email protected]107304
    [ Fri Feb 18 12:03:33 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,113,Inside ICSDatabaseConnection, MAX_COUNT =5
    [ Fri Feb 18 12:12:40 GMT 2011 ],ERROR,[main],com.cisco.nm.rmeng.inventory.reports.util.LocalXMLParser,getFileName,545,Here *****eox_card.xml
    [ Fri Feb 18 12:12:44 GMT 2011 ],ERROR,[main],com.cisco.nm.rmeng.inventory.reports.util.LocalXMLParser,getFileName,545,Here *****eox_device.xml
    NOTE:
    I can see both files in the NMSRoot\CSCOpx\files\rme\jobs\inventory\reports\EOX_PSIRT path, but not in the local_xml directory?
    Then nothing for an hour and then the following that I don't think id related?
    [ Fri Feb 18 13:18:58 GMT 2011 ],INFO ,[TP-Processor3],com.cisco.nm.rmeng.inventory.reports.ui.action.IRJobsAction,getArchiveId,387,Entering the method
    [ Fri Feb 18 13:18:59 GMT 2011 ],INFO ,[TP-Processor3],com.cisco.nm.rmeng.inventory.reports.datagenerators.SystemReports,goForPDFReport,308,Device Limit is = 750
    [ Fri Feb 18 13:18:59 GMT 2011 ],INFO ,[TP-Processor3],com.cisco.nm.rmeng.inventory.reports.datagenerators.SystemReports,goForPDFReport,309,Device Limit for Device Statistics Report is = 750
    INFO ,2011-02-18 13:18:59,281,export device list from request [Lcom.cisco.nm.rmeng.util.datastructures.DeviceID;@1db810a
    [ Fri Feb 18 14:16:17 GMT 2011 ],INFO ,[TP-Processor5],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,61,WebappClassLoader
    delegate: false
    repositories:
    /WEB-INF/classes/
    ----------> Parent Classloader:
    org.apache.catalina.loader.StandardClassLoader@1a06e38
    [ Fri Feb 18 14:16:17 GMT 2011 ],INFO ,[TP-Processor5],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,126,INFO: Resource Limit from License file=10000
    [ Fri Feb 18 14:16:17 GMT 2011 ],INFO ,[TP-Processor5],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,203,
    [ Fri Feb 18 14:20:00 GMT 2011 ],INFO ,[TP-Processor16],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,61,WebappClassLoader
    delegate: false
    repositories:
    /WEB-INF/classes/
    ----------> Parent Classloader:
    org.apache.catalina.loader.StandardClassLoader@1a06e38
    [ Fri Feb 18 14:20:00 GMT 2011 ],INFO ,[TP-Processor16],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,126,INFO: Resource Limit from License file=10000
    [ Fri Feb 18 14:20:00 GMT 2011 ],INFO ,[TP-Processor16],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,203,
    [ Fri Feb 18 14:23:03 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,45,called getCrtList to get list of Inventory Custom Templates
    [ Fri Feb 18 14:23:04 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,51,Connection is not null
    [ Fri Feb 18 14:23:04 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,70,Number of templates returning: 2
    at that point I cancelled the job as it had been running for two hours for 5 devices.

  • LMS 3.2 - RME Report job

    I hit "Stop" on a scheduled report job; now the report is in Stopped state.
    Where is Start? I can't find it...
    Thanks

    Sorry for delay, I was on holiday.
    It is a change audit report job, scheduled daily. By mistake I hit Stop, and now the job is in status stopped. I thought I will find a Start, but I can't find it.
    In attach you can see the screenshot.
    Thnaks for your answer.

  • LMS 3-2 / RME 4.3.1 and syslog forwarding sends extra blank syslog

    Customer is telling me they setup syslog forwarding (I didn't ask where they did this), but they state that each syslog message being forwarded that another blank syslog is sent to that device along with the forwarded message.
    Any ideas why the blank syslog gets sent with the forwarded syslog?
    LMS Bundle 3.2
    Campus Manager 5.2.1
    RME 4.3.1

    I think the customer is shooting the messenger.
    Find out where the syslog is forwarded. Probably something wrong there
    LMS doesn't do syslog forwarding normally
    I guess you could create a script that could do that.
    Cheers,
    Michel.

  • LMS 3.2 - RME 4.3.1 Sync archive fails

    Hi,
    Sync archive fails for some of my devices.
    This is the message :
    *** Device Details for .... ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> Telnet,TFTP,SSH,RCP,HTTPS
    Execution Result:
    CM00139 Could not archive config Cause: Action: Verify that device is managed and credentials are correct. Increase timeout value, if required.
    Check device credential is OK (Telnet + SNMP V2)
    This device is Cisco Systems WS-C6009.Cisco Catalyst Operating System Software, Version 7.4(3). (sysObjectID : enterprises.9.5.39)
    I have modified the "Maximum time to wait for Job Results per device (seconds):" to 240.
    What could be wrong?
    Thanks in advance

    Resolution Summary:Checked the dcmaService.log and found the following recurring statements.
    com.cisco.nm.xms.xdi.pkgs.LibCommon.common.CommonUtility,getMinSupportedVersion,406,Descr = 12.2(50)SE
    [ Tue Oct 26  15:58:45 CDT 2010 ],DEBUG,[main],com.cisco.nm.xms.xdi.pkgs.LibCommon.common.CommonUtility,getMinSupportedVersion,405,suppSysId = .1.3.6.1.4.1.9.1.927
    [ Tue Oct 26  15:58:45 CDT 2010
    Checked that the device IOS was well above the version specified in the logs, so thought may be an issue with the device packages.
    Checked the mdf version was 1.25 which came as default when we install LMS 3.2, so upgraded the mdf version to 1.45.
    Still the issue didn't got solved, so upgraded the RME device packages and now the archive job was successful.
    Message was edited by: Dheeraj Gera

  • LMS 3.2 - RME 4.3.1 Inventory Collection never stops (Job Result = pending)

    Hello all,
    with our LMS-System running on Solaris 10 we have the following problem:
    - Inventory Collection never stops after starting
    - This can be seen with all devices or 1 device selected
    - Config-Mgmt is working
    - After re-init of RME-DB the problem persists
    In Logfile (IC_Server.log) no problems are shown.
    In Job-Logfile only the collection request is shown.
    Any help is appreciated
    Thanks for your feedback
    Lothar

    Hi Joe,
    with further troubleshooting this problem I discoverd the following.
    - Having problems with inventoring certain Cat4000 we requested patch for Bug-ID CSCtb16925 (LibInventory.zip-File).
    - Replacing this file with the old one or installing the newest IDU for RME the problem was solved.
    It seems that the LibInventory.zip file given with Bug-ID CSCtb16925 is somewhat buggy (maybe in context with device-number) greater
    than 1000.
    Thanks for your support.
    Lothar

  • LMS 2.6 / RME 4.0.6 : Update device packages

              Hi All,
    I want update device packages for the device Unknow c3560v2 and ME2400 on ciscoworks lms 2.6.
    CCS= version 3.0.6
    CM= version 4.0.10
    CV = 6.1.5
    DFM = 2.0.7
    IPM = 2.6.0
    RME = 4.0.6
    The server doesn't have access internet so i downloaded files and copy this on directory psu.
    1) I've tried directely upgrading the device package in RME, but it failed. He want file mdf v1.22 and the version is V1.20.
    2) I've upgrading CiscoView for device, it's ok
    3) I've upgrading Campus Manager with version 4.0.13, it's ok
    4) I've tried upgrading the device package in RME, but it failed. He want file mdf v1.27 and the version is V1.25 after upgrade Campus.
    I don't find on site cisco the version 1.27 of mdf, where i can found this file ?
    I have the version 1.56 but it's compatible for LMS 2.6 and RME 4.0.6 ?
    How can uninstall a version of mdf if I have a problem with this version?
    thanks

    Indeed. It does look like the only MDF available is 1.52 for CS 3.0
    I also saw the note:
    You must install Campus Manager 4.0.13 and MDF 1.27 before installing CMDeviceUpdates 2.0.
    RME 4.0.6 Release Notes
    FYI.  LMS 2.6 is EOL.  As such I suggest you contact your account team to see if they can acquire it for you.
    Thanks.

  • LMS 2.5 RME Table Of Content

    Hi We have installed LMS 2.5.
    We are not able to view TOC(Table of Contents of RME(4.0.3). Please suggest
    Vaishali

    Hi,
    Are you referring to 'dbreader'? This is not recommended as you can potentially break CiscoWorks.
    If you forgot the database password here is the way that you can change it.
    Windows:
    net stop crmdmgtd
    ..\CSCOpx\bin\perl dbpasswd.pl dsn=rme encryption=yes npwd=
    net start crmdmgtd
    Solaris:
    #/etc/init.d/dmgtd stop
    opt/CSCOpx/bin/dbpasswd.pl dsn=rme encryption=yes npwd=
    #/etc/init.d/dmgtd start
    Thanks.

  • LMS 2.5 RME TOC

    Hi We have installed LMS 2.5.
    We are not able to view TOC(Table of Contents of RME(4.0.3). Please suggest
    Vaishali

    Hi,
    Are you referring to 'dbreader'? This is not recommended as you can potentially break CiscoWorks.
    If you forgot the database password here is the way that you can change it.
    Windows:
    net stop crmdmgtd
    ..\CSCOpx\bin\perl dbpasswd.pl dsn=rme encryption=yes npwd=
    net start crmdmgtd
    Solaris:
    #/etc/init.d/dmgtd stop
    opt/CSCOpx/bin/dbpasswd.pl dsn=rme encryption=yes npwd=
    #/etc/init.d/dmgtd start
    Thanks.

  • LMS 4.0 and EoS/EoL Hardware report not working..

    Hi guys,
    our LMS server has proxy access to the internet but running a EoS/EoL hardware report results in:-
    No data available in the report. The problem could be any one of the following:
    1. No EoS/EoL hardware data available in the LMS database for the selected device(s).
    2. PSIRT/EOX system job might not have run, or might have failed.
    3. You might have entered the wrong cisco.com credentials.
    I tried doing it manually by downloading the psirt_eox_offline.txt to the relevant directory and changing the EoS/ EoL configuration to 'local server' on our LMS server but I still get the above message.
    I know for a fact we are running devices that have recently been announced by cisco as going EoL and or EoS eg 3750 switches and 2800 series routers so I was expecting to see something in the report.
    How can I get this working successfully?
    Thanks in advance
    Trevor

    Problem is now fixed.
    I disabled 'use proxy server' and its now working.

  • Cisco Prime LMS 4.2, how to sort Uptime report?

    Using an Inventory Custom Report, Uptime can be shown and it is nicely parsed out to be human readable.  But how can I sort it to get the longest uptimes?
    Thanks for any help,
    Dave Faught

    You can select parameters, but LMS won't show you data sorted up, unfortunately.
    But withing the report, you can click on the columt fields and it can sort the data for you, and later it can be exported to pdf or csv:
    If your schedule the job, you can receive the data directly mailed as .csv, which again can be sorted easily. No option withing LMS to do it before report is generated.
    -Thanks
    Vinod
    **Support Contributors. Rate them. **

Maybe you are looking for