LMS 3.2 - RME Report job

I hit "Stop" on a scheduled report job; now the report is in Stopped state.
Where is Start? I can't find it...
Thanks

Sorry for delay, I was on holiday.
It is a change audit report job, scheduled daily. By mistake I hit Stop, and now the job is in status stopped. I thought I will find a Start, but I can't find it.
In attach you can see the screenshot.
Thnaks for your answer.

Similar Messages

  • How to edit a scheduled Syslog Report job in RME 4.03

    Hi
    I am using Cisco Works LMS 2.5, with RME 4.03
    There are 4 scheduled syslog report jobs that are set to run. We had a problem with syslog that meant that these reports returned zero records.
    Syslog and manual reports now work fine, but I need to edit or delete and re-create the scheduled jobs as the problem still exists with these. I'm thinking that perhaps the required devices are not selected (I had to re-build RME db from scratch recently also)
    But I cannot find them anywhere!
    All I can find in RME Jobs page is the instance of the job.
    How do I edit the main job?
    Help much appreciated
    Thanks!
    Phil

    The answer was provided by TAC.
    It's not possible to edit jobs. the ones you see in RME Jobs are the instances of the jobs.
    The only way to delete these jobs is via the CLI:
    +  Stop daemons :
    Net  stop crmdmgtd  “wait till its down”
    +  cd to C:\progra~1\CSCOpx\databases\rmeng>
    +  Issue the command :
    dbvalid  -c "uid=dba;pwd=;dbf=rmeng.db"
    example  :
    C:\Program  Files\CSCOpx\databases\rmeng>dbvalid -c "uid=dba;pwd=c2kY2k;dbf=rmeng.db"
    please  send me the results
    please  note that my RME db password is the default à c2kY2k you  have to use the correct RME pwd .
    +  Start daemons manager : net start crmdmgtd “wait till it starts  ”
    One for the library :)
    Thanks for your responses tho. cheers!

  • LMS 3.2 and RME NetConfig Job - No Devices

    I'm runnig CW LMS 3.2 on Solaris 10. If I go to Resource Management Essentials, click on NetConfig, and then select "create" as in "create a NetConfig job", it takes me to the Netconfig Jobs screen. On this screen, I check  "select all devices ", but afterwards it says that "0 devices selected". There are over 1000 devices in our inventory, so I cannot understand why they are not found. They are visible on the system module, and in RME-Devices. But they are not availalble for RME Netconfig jobs.
    Any ideas?

    When I enter the NetConfig jobs screen, I click on "create" ,which takes me to the next screen, where I click on "device" , which takes me to the next screen where I have a select "device box" and a "select task" box. Checking the "all devices" option results in "0 devices select". If I click on the "+" sign on the "all devices" option to expand a list of all devices, it changes to a "-" but does not show any devices.
    About the screen shot, due to the confidential nature of my work environment, I may not be allowed to do that. I'm checking with the security manager about that now.

  • EoS/EoL hardware report problem on LMS 3.2 RME 4.3.1

    Hi,
    Trying to run EoS/EoL RME reports for the first time and having problems. I have applied latest patch for CSCte717641 and this seems to have made things a little better. Originally the hardware report simply failed, but now it seems to run, but never finish. To avoid any download problems, I have manually downloaded both the EOX_SOFTWARE.ZIP and the PSIRT_EOX_OFFLINE.txt, which I have placed into the "NMSRoot\rme\jobs\inventory\reports\EOX_PSIRT\local_xml" folder. The PSIRT file has been un-compressed and put in as .txt and the EOX file has been left as a .zip. Now the report starts running, I can see it creating a temp folder in the above folder and it seems to place two files in there eos_card and eos_device, but then it appears to delete the temp folder and the job just sits at running?
    Any advice would be appreciated

    This is from the time I ran the report.
    [ Fri Feb 18 12:03:15 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,383,InventoryReportsAction Getting request params : ReportNAme: EoS/EoL Hardware ReportApp Name : null
    [ Fri Feb 18 12:03:15 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,392,Action of Filter is null
    [ Fri Feb 18 12:03:15 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,911,Generate report Request from UI
    [ Fri Feb 18 12:03:17 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.ui.action.InventoryReportsAction,perform,1320,Update user given cisco.com credentails
    [ Fri Feb 18 12:03:17 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.util.IRJobUtil,persistJob,201,new folder created for storing the job
    [ Fri Feb 18 12:03:18 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,45,called getCrtList to get list of Inventory Custom Templates
    [ Fri Feb 18 12:03:18 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,51,Connection is not null
    [ Fri Feb 18 12:03:18 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,70,Number of templates returning: 2
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,,246,
    Starting the JOB 3972
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1506,
    Getting the job details from persisted Job
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1528,
    Job Details : EoS/EoL Hardware Report
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1530,
    Job is custom report : false
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1532,
    Job runtype : Immediate
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1534,
    Job date : 18-2-11 12:10
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1536,
    Job description : test99
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1538,
    Job E mail id :
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1540,
    Job publish location :
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1542,
    Job template id : 0
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1544,
    Job job id : 3972
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,populateJobData,1562,
    All the report properties read successfully from the job.
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,61,sun.misc.Launcher$AppClassLoader@92e78c
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,203,
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,294,
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,314,
    Valid License.
    Proceeding with job execution.
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,334,
    Running Report job 3972 instance id 0
    [ Fri Feb 18 12:03:19 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,354,inside devsel flow
    [ Fri Feb 18 12:03:27 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,558,normal3
    [ Fri Feb 18 12:03:28 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,600,successfully got predeployed devices
    [ Fri Feb 18 12:03:28 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,runReport,606,submitted.length3
    [ Fri Feb 18 12:03:29 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,generateReportData,1633,************before set device in gen rep data**********
    [ Fri Feb 18 12:03:29 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,generateReportData,1639,************after set device in gen rep data*******
    DEBUG,2011-02-18 12:03:32,250,Datagenerator class name is class com.cisco.nm.rmeng.inventory.reports.datagenerators.EOS_EOL_RDG
    DEBUG,2011-02-18 12:03:32,250,Datagenerator class instance is [email protected]107304
    [ Fri Feb 18 12:03:33 GMT 2011 ],INFO ,[main],com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,113,Inside ICSDatabaseConnection, MAX_COUNT =5
    [ Fri Feb 18 12:12:40 GMT 2011 ],ERROR,[main],com.cisco.nm.rmeng.inventory.reports.util.LocalXMLParser,getFileName,545,Here *****eox_card.xml
    [ Fri Feb 18 12:12:44 GMT 2011 ],ERROR,[main],com.cisco.nm.rmeng.inventory.reports.util.LocalXMLParser,getFileName,545,Here *****eox_device.xml
    NOTE:
    I can see both files in the NMSRoot\CSCOpx\files\rme\jobs\inventory\reports\EOX_PSIRT path, but not in the local_xml directory?
    Then nothing for an hour and then the following that I don't think id related?
    [ Fri Feb 18 13:18:58 GMT 2011 ],INFO ,[TP-Processor3],com.cisco.nm.rmeng.inventory.reports.ui.action.IRJobsAction,getArchiveId,387,Entering the method
    [ Fri Feb 18 13:18:59 GMT 2011 ],INFO ,[TP-Processor3],com.cisco.nm.rmeng.inventory.reports.datagenerators.SystemReports,goForPDFReport,308,Device Limit is = 750
    [ Fri Feb 18 13:18:59 GMT 2011 ],INFO ,[TP-Processor3],com.cisco.nm.rmeng.inventory.reports.datagenerators.SystemReports,goForPDFReport,309,Device Limit for Device Statistics Report is = 750
    INFO ,2011-02-18 13:18:59,281,export device list from request [Lcom.cisco.nm.rmeng.util.datastructures.DeviceID;@1db810a
    [ Fri Feb 18 14:16:17 GMT 2011 ],INFO ,[TP-Processor5],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,61,WebappClassLoader
    delegate: false
    repositories:
    /WEB-INF/classes/
    ----------> Parent Classloader:
    org.apache.catalina.loader.StandardClassLoader@1a06e38
    [ Fri Feb 18 14:16:17 GMT 2011 ],INFO ,[TP-Processor5],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,126,INFO: Resource Limit from License file=10000
    [ Fri Feb 18 14:16:17 GMT 2011 ],INFO ,[TP-Processor5],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,203,
    [ Fri Feb 18 14:20:00 GMT 2011 ],INFO ,[TP-Processor16],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,61,WebappClassLoader
    delegate: false
    repositories:
    /WEB-INF/classes/
    ----------> Parent Classloader:
    org.apache.catalina.loader.StandardClassLoader@1a06e38
    [ Fri Feb 18 14:20:00 GMT 2011 ],INFO ,[TP-Processor16],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,126,INFO: Resource Limit from License file=10000
    [ Fri Feb 18 14:20:00 GMT 2011 ],INFO ,[TP-Processor16],com.cisco.nm.rmeng.common.VerifyRMELicense,validate,203,
    [ Fri Feb 18 14:23:03 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,45,called getCrtList to get list of Inventory Custom Templates
    [ Fri Feb 18 14:23:04 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,51,Connection is not null
    [ Fri Feb 18 14:23:04 GMT 2011 ],INFO ,[TP-Processor9],com.cisco.nm.rmeng.inventory.reports.custom.IRCrtmImpl,getCrtList,70,Number of templates returning: 2
    at that point I cancelled the job as it had been running for two hours for 5 devices.

  • LMS 3.2 RME 4.3.1 Archive Jobs hang

    LMS 3.2 Windows 2003 R2 8Gig RAM
    Managing ~4000 devices currently on LMS 3.1. Built new LMS3.2 server and patched to RME 4.3.1.
    Import from csv file works fine and RME inventory collection/ Campus Manager Data Collection all works perfectly.
    Archive Jobs hang (at random device #'s) after starting successfully.
    I have tried restarting ConfigMgmtServer process, rebooting, even reinit CMF, RME and ANI db and starting from scratch but issue persists.
    Are there any known issues with LMS 3.2 on Archive Jobs hanging or should I debug and open TAC case?

    Resolution Summary:Checked the dcmaService.log and found the following recurring statements.
    com.cisco.nm.xms.xdi.pkgs.LibCommon.common.CommonUtility,getMinSupportedVersion,406,Descr = 12.2(50)SE
    [ Tue Oct 26  15:58:45 CDT 2010 ],DEBUG,[main],com.cisco.nm.xms.xdi.pkgs.LibCommon.common.CommonUtility,getMinSupportedVersion,405,suppSysId = .1.3.6.1.4.1.9.1.927
    [ Tue Oct 26  15:58:45 CDT 2010
    Checked that the device IOS was well above the version specified in the logs, so thought may be an issue with the device packages.
    Checked the mdf version was 1.25 which came as default when we install LMS 3.2, so upgraded the mdf version to 1.45.
    Still the issue didn't got solved, so upgraded the RME device packages and now the archive job was successful.
    Message was edited by: Dheeraj Gera

  • LMS 3.2: RME failed archive with Nexus 5010

    Hi,
    LMS 3.2, RME 4.3.1, dev packages updated, Windows.
    We would like to archive the configuration of the Nexus 5010 switches. Due to authentication with Radius based on tokens we're not able to use telnet/SSH and therefore we only can use SNMP WRite in combination with TFTP.  But, this is not working at all. Other systems like 3750 works fine. Is there a difference between Catalysts IOS and nexus NXOS?
    I searched the forum and found this:
    https://supportforums.cisco.com/message/663481#663481
    upgrade to LMS 2.6, archive config not working anymore
    We ship and start a TFTP server by default on Windows.  You must have an SNMP read-write community string configured on your devices, and entered in DCR for TFTP config fetches to work.  Additionally, udp/69 must be open between device and server.
    The easiest way to troubleshoot this kind of problem is to start a sniffer trace on the LMS server (using Device Center > Packet Capture).  Filter on all traffic to one of the failing devices.  Then, run a Sync Archive job for that same device.  When it fails, the sniffer trace will indicate what the problem is
    Regards
    Ad Olsthoorn

    Hi Lavramov,
    Yes I'm quite sure, I installed the required packages acoording to the Nexus.RME431.v2-2.readme.pdf manual. the manual tell me to install the following (see also attachement).
    To install the Cisco Nexus Series Package, you must install the following dependent packages:
    - SharedDcmaSS.RME431.v2-2.zip
    - SharedInventoryMDS.RME431.v1-5-1.zip
    - SharedSwimMDS9000.RME431.v1-6-1.zip
    - SharedNetshowSS.RME431.v1-1.zip
    regards
    Ad

  • Report Job was cancelled upon user request???

    Hi,
    My reports take more than 10 minutes to complete, most times I get
    "Report Job was cancelled upon user request".
    error, how to fix this problem? Is there any time limit inside the report I can set.
    Thanks

    hi ,
    There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
    Hope this helps
    Manoj

  • Not able to create Report Job in BI Publisher

    Hi,
    I have been struggling to create a new Report Job under New/Published Reporting/Report Job. Whenever I click on new report job its coming up with blank blue screen but I can able to create new data models and reports under same new/Published Reporting.
    I have checked the nqschedularlog, but couldnt find what is causing to the problem, below is the nqschedular log. Please share have any ideas.
    [2012-10-03T06:02:32.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: ] [tid: a8aef810] Scheduler service stopped.
    [2012-10-03T06:02:32.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: ] [tid: 4157f940] [nQSError: 46066] Operation cancelled.
    [2012-10-03T06:02:32.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: ] [tid: 42392940] [nQSError: 46066] Operation cancelled.
    [2012-10-03T06:02:32.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: ] [tid: a8aef810] [68015] Scheduler service stopped.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\NumGlobalRetries not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\MinGlobalSleepSecs not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\MaxGlobalSleepSecs not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\NumRequestRetries not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\MinRequestSleepSecs not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\MaxRequestSleepSecs not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\NumDeliveryRetries not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\MinDeliverySleepSecs not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\MaxDeliverySleepSecs not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\Debug not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\KeepErrorLogFiles not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\LogMailContent not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\MaxRowsTimesColumns not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\Generate7BitPlainText not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value iBots\ForceUTF8 not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value Workflow\Server not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value Workflow\System not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value Workflow\Service not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value Mail\SmtpCaCertificateFile not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value Mail\SmtpCaCertificateDirectory not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [67004] Configuration value Mail\SmtpCipherList not set.
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] Verifying Scheduler's backend database configuration [[
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 409b7940] [16020] Metadata Database Type: Oracle 11g [[
    Data Source Name: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=cfsd-scan.corporate.ge.com)(PORT=1525)))(CONNECT_DATA=(SERVICE_NAME=rdcdwd.corporate.ge.com)))
    Data Source Type: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64b
    [2012-10-03T06:11:09.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 409b7940] [nQSError: 46066] Operation cancelled. [[
    PRIMARY_POOL RetrieveColumnInfo from table S_NQ_INSTANCE Exchange
    [2012-10-03T06:11:10.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [68013] Scheduler service started.
    [2012-10-03T06:11:10.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] Scheduler service started.
    [2012-10-03T06:11:10.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 17f45810] [71076] Oracle BI Scheduler cihcisdobi753:9705 has been changed to an Inactive state.
    [2012-10-03T06:11:13.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 404a9940] [43071] A connection with Cluster Controller cihcisdobi753.corporate.ge.com:9706 was established.
    [2012-10-03T06:11:13.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJRXilE3r2hD1Bp2gj0006N^000000] [tid: 404a9940] [71075] Oracle BI Scheduler cihcisdobi753:9705 has been changed to an Active state.
    [2012-10-03T06:14:31.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: ] [tid: 17f45810] Scheduler service stopped.
    [2012-10-03T06:14:31.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: ] [tid: 41b05940] [nQSError: 46066] Operation cancelled.
    [2012-10-03T06:14:31.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: ] [tid: 404a9940] [nQSError: 46066] Operation cancelled.
    [2012-10-03T06:14:32.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: ] [tid: 17f45810] [68015] Scheduler service stopped.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\NumGlobalRetries not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\MinGlobalSleepSecs not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\MaxGlobalSleepSecs not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\NumRequestRetries not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\MinRequestSleepSecs not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\MaxRequestSleepSecs not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\NumDeliveryRetries not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\MinDeliverySleepSecs not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\MaxDeliverySleepSecs not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\Debug not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\KeepErrorLogFiles not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\LogMailContent not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\MaxRowsTimesColumns not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\Generate7BitPlainText not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value iBots\ForceUTF8 not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value Workflow\Server not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value Workflow\System not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value Workflow\Service not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value Mail\SmtpCaCertificateFile not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value Mail\SmtpCaCertificateDirectory not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [67004] Configuration value Mail\SmtpCipherList not set.
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] Verifying Scheduler's backend database configuration [[
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: 404ad940] [16020] Metadata Database Type: Oracle 11g [[
    Data Source Name: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=cfsd-scan.corporate.ge.com)(PORT=1525)))(CONNECT_DATA=(SERVICE_NAME=rdcdwd.corporate.ge.com)))
    Data Source Type: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64b
    [2012-10-03T06:15:21.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: 404ad940] [nQSError: 46066] Operation cancelled. [[
    PRIMARY_POOL RetrieveColumnInfo from table S_NQ_INSTANCE Exchange
    [2012-10-03T06:15:22.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [68013] Scheduler service started.
    [2012-10-03T06:15:22.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] Scheduler service started.
    [2012-10-03T06:15:22.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: a5b8f810] [71076] Oracle BI Scheduler cihcisdobi753:9705 has been changed to an Inactive state.
    [2012-10-03T06:15:42.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: 414e0940] [43071] A connection with Cluster Controller cihcisdobi753.corporate.ge.com:9706 was established.
    [2012-10-03T06:15:42.000+00:00] [OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004mmJeYmo03r2hD1Bp2gj0006fR000000] [tid: 414e0940] [71075] Oracle BI Scheduler cihcisdobi753:9705 has been changed to an Active state.

    Hi,
    Can anyone please share your views, if u have faced similar kind of issue.
    Regards

  • Report job is not run at scheduled time

    OS：WindowsServer2008R2
    Oracle BI 11g(11.1.1.6.0)
    CT defined a report job
    ====
    Frequency Daily
    Start 2013/01/14 AM 06:00:00
    End 2020/01/14 PM 11:59:00
    timezone [GMT+09:00]Osaka,Tokyo
    ====
    but he found the report is not run at 06:00:00
    at 2013/01/16 08:50AM,he login to BIP,and got to Report Job history.
    he found the staus of this report is running and
    start processing is 2013/01/16 08:51:32AM
    It seems the report job is run after login.
    In CT's environment , the followinig work are done Every Day
    22:00　stop OracleBI　　(opmnctl.bat→stopManagedWebLogic.cmd→stopWebLogic.cmd）
    00:00　restart server
    05:45　clear cashe (nQCmd.exe)
    05:45　start OracleBI(BI_START.bat)
    06:00　report job is not run for no mail received.-->★
    Could you tell me why the report job are not run at 06:00AM
    Does any one can give me some advice on investigating this issue, which information are needed?

    Any suggestion on this issue?

  • Oracle Reports Server CGI - Report Job was cancelled upon user request.

    I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Report Job was cancelled upon user request.
    However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
    Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
    Any help would be greatly appreciated.

    hi ,
    There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
    Hope this helps
    Manoj

  • BI Publisher "Report Job" not showing job continously searching

    Hi Experts,
    I'm facing problem while schedule job in Oracle BI Publisher, I successfully schedule job (for bursting) and its running 3 or 4 days continuously, as a result got the report by email but after that I don't get any email, even no error message by email as well. when I go to "Report Job" it showing no data and continuously searching, showing "Fetching Jobs Data....." right top of the page
    Administration>Scheduler Configuration
    Scheduler = Quartz
    Administration>Scheduler Diagnostics
    Result = Passed
    Oracle BI Publisher 11.1.1.6.0

    Ok, you cannot see report scheduler information, report history if scheduler is down or hung.
    1. How many reports are simultaneously scheduled to run?
    2. How do you rate the size of the scheduled reports? Based on number of rows it generates - Small? Medium? or Large?
    Looks like BI Publisher is not able to push jobs into the scheduler queue.
    Please check BIP scheduler database table "QRTZ_FIRED_TRIGGERS" to see any running or pending jobs.
    You will come to the root cause of the issue by setting the BIP log level to trace:32
    http://docs.oracle.com/cd/E28280_01/bi.1111/e22255/diagnostics.htm#BIPAD343
    or configure xdodebug
    https://blogs.oracle.com/xmlpublisher/entry/get_logging
    Take next action steps based on the error/warning that will be captured in the log files during the time of scheduling
    You can also consider the following but I would prefer to check the log files first
    Please try this at your BIP server side
    1. Increase Java Heapsize if it is less
    2. Increase BIP Scheduler Database size
    3. Clear server cache and scheduler database transaction logs

  • Error generating report job with the task name 'FSRM_Report_Task

    Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
    We get the following in the event logs:
    Log Name:      Application
    Source:        SRMREPORTS
    Date:          09/06/2014 08:09:55
    Event ID:      752
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      FILESERVER2.curriculum.riddlesdown.local
    Description:
    Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SRMREPORTS" />
        <EventID Qualifiers="0">752</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
        <EventRecordID>42920</EventRecordID>
        <Channel>Application</Channel>
        <Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    </Data>
      </EventData>
    </Event>
    We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
    Anybody have any ideas?

    Hi,
    From the error message, it failed because of "invalid argument: storagetype = '101' ".
    101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
    FsrmStorageModuleType enumeration
    http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
    If you have any feedback on our support, please send to [email protected]

  • Is there a way to deny access to BI Publisher -Report job in OBIEE 11g?

    Thank you all for the helpful information in the posts. I am trying to disable or not to display Report job under published reporting in OBIEE 11g. Could any one of you you please help me with the steps?
    My issue:
    I am pretty new to OBIEE and we are using OBIEE 11g when the user clicks on the new drop down, i am trying to disable or turnoff Report job under published reporting for a user group. I tried to find the relevant components for published reporting to deny access to report job under manage privileges but no luck i couldn't find any and i realized that i should be looking into Manage Bi publisher roles and responsibilities but i cannot remove the roles. Please help me with the steps and the options where i need to go and what i should do to not to display the report job. Your help is greatly appreciated, if i am not clear please let me know i will try to rephrase or explain it better
    FYI
    We are using LDAP for user creation and we have created a new group and created a test user belongs to that group and that user should not see the Report job. When i am seeing the users roles and responsibilities it is also showing me other two roles authenticated user role and BI consumer role for the test user, when i asked the admin guy dealing with LDAP he said he only associated the user with that only new group. Please advice
    Thanks,
    Ravi
    Edited by: user1146711 on Aug 18, 2011 2:00 PM
    Edited by: user1146711 on Aug 18, 2011 2:02 PM
    Edited by: user1146711 on Aug 18, 2011 2:03 PM

    In EM, go to Weblogic Domain, right click on bifoundation_domain and on the Security menu choose Application Policies.
    Set Application Stripe to obi and click the blue arrow search button.
    Highlight BIConsumer and click Edit.
    Under Permissions locate Resource Name oracle.bi.publisher.scheduleReport. Highlight this and click Delete...
    Click OK (top right corner).
    Now log your user out of OBIEE and back in again, and the option should have disappeared from their New menu.

  • Problem with Crystal Report Job Server Destinations

    I am using Crystal Reports XI Server and I am having problems with scheduling.  I believe that the problem is that I have not enabled any destinations under the Crystal Reports Job Server.  The following is an observation list:
    -Enabled and set up all destinations for other servers, such as the Destination Server.
    -Have been able to use Infoview to directly email, inbox, and file save reports in different formats (I believe the Destination Server controls this, right?)
    -All servers are enabled in the Central Configuration Manager
    -Have been able to go into the Crystal Reports Job Server within the CMC, but I DO NOT FIND ANY destinations to enable (why is this?)
    -Have not been able to schedule an instance of any report (neither email, nor inbox, nor file, ...nothing)
    Could somebody please help me with this?  Is this a limitation to the Crystal Reports XI Server vs the Enterprise edition?  Is there something else I am missing?  I have never been able to successfully schedule a report.

    Thank you for the input, but I have not yet solved my problem.  Please allow me to provide some additional information which may give more hints:
    I have Crystal Reports XI Server R2 installed as 5 named user license (version that comes with developer)
    The following servers are enabled in CMC (which is all of them)
    -Input.DomainNameSQL
    -DomainNameSQL.cacheserver
    -DomainNameSQL.cms
    -DomainNameSQL.destinationjobserver (has all destinations enabled)
    -DomainNameSQL.eventserver
    -DomainNameSQL.ListofValuesJobServer (no destination tab)
    -DomainNameSQL.pageserver
    -DomainNameSQL.programjobserver (has all destinations enabled)
    -DomainNameSQL.RAS
    -DomainNameSQL.reportjobserver (has destinations tab, but there are no destination entries to enable! Object type is: CrystalEnterprise.Report and detail: IDL:omg.org/CORBA/UserException:1.0
    . Details: %2.'
    These are the ONLY two event IDs that appear after I schedule the report instance.  No other events occur.
    Are there any other logs that I can check?  How do I look up what event ID 45387 and 45385 are?
    Thanks!

  • Report Job failed when Bursting is used in BI Publisher 11.1.1.5

    The Report Job failed when Bursting is used.
    error message:
    [INSTANCE_ID=aimedap1s.1347261753557] [OUTPUT_ID=1421][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
    at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:455)
    at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
    at oracle.xdo.enterpriseScheduler.util.CheckpointEnabl
    the reproduce steps :
    1. Create a Bursting query in the Data Model
    2. Create Report Job with the option
    "Use Bursting Definition to Determine Output & Delivery Destination" enabled
    3.Schedule the report Job
    4. run the report and found the status of it is problem, the error message above can be found.
    *Note:not all the report job failed when bursting is used, in step1 when set OUTPUT_FORMAT as PDF,HTML,RTF,PowerPoint 2007,
    the report will be run successfully,but when set other OUTPUT_FORMAT that list in the following document, the report can not run successfully.
    http://docs.oracle.com/cd/E21764_01/bi.1111/e18862/T527073T555155.htm
    Adding Bursting Definitions>>Defining the Query for the Delivery XML
    >>OUTPUT_FORMAT
    Can anyone give some advice on how to troubleshooting it?
    Looking forward for your reply
    Regards

    Hello vma.
    I happened to find the solution on 11.1.1.3. With xdo-server.jar, you can use DataProcessor class.
    For details and sample source code:
    http://blog-koichiro.blogspot.com/2011/11/bi-publisher-java-apigenerate-pdf-with.html
    * Not sure if it works on 11.1.1.5 though, I hope this gonna help you.

Maybe you are looking for

  • A group of folders is being created inside of Movies?

    I keep finding folders being created inside the movies folder.  The title is ( A Document Being Saved By StompUtil) with the titled being incremented with each new one.  I now have 3 of them. What is going on here?

  • FindText doesn't work in Acrobat X

    I have installed the Adobe Acrobat software development kit and until the Acrobat 9 the FindText function works correctly. With Acrobat X (last update 10.1.3) the FindText doesn't work. When you solve this malfunction? Is it possible to have a valid

  • Printing excel list through internal table

    hi, i want to create excel sheet having fixed(pre defined) column width through internal table , in program i m using FM 'DOWNLOAD' and passing internal table and getting excel list but how to get fixed column width. also how to display leading zero

  • How do you set up iTC for two Different versions of the same app?

    I have been reading the iTC Developer Guide searching for the answer to this question, but so far I have found nothing that would help.  I plan on having a Lite and a Pro version of my app, and I may also have an iPad version as well. I have seen som

  • Cannot download the trial version of premier 13

    Good afternoon. I am unable to use my full version of Premeier elements 13 so I thought I would download the trial one so I have done that and it looks like a folder on my desktop? When I go into it it has two other folders, one that says PRE 13 and