LMS 3.2: Running CSCOpx processes

After a Device Package update, I see the following procs left running:
    root  8268     1  24 15:39:15 ?           1:11 /opt/CSCOpx/objects/dmgt/dmgtd.sol
    root 10304  2006   0 15:51:01 ?           0:00 /opt/CSCOpx/bin/in.tftpd -s /tftpboot
casuser 23883     1   0   Dec 23 ?           0:10 /opt/vgi/csco/CSCOpx/objects/wfengine/program/PolicyScheduler
casuser 23878     1   0   Dec 23 ?           0:05 /opt/vgi/csco/CSCOpx/objects/wfengine/program/DataStore
casuser 23880     1   0   Dec 23 ?           0:12 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGLogger
casuser 23881     1   0   Dec 23 ?           0:05 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGProxy
casuser 23889     1   0   Dec 23 ?           0:04 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGHelper
casuser 23879     1   0   Dec 23 ?           0:06 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGScript
casuser 23882     1   0   Dec 23 ?           1:25 /opt/vgi/csco/CSCOpx/objects/wfengine/program/OpsBREngine
casuser 11683     1  24 15:59:39 ?           1:32 /opt/vgi/csco/CSCOpx/lib/jre/bin/java -classpath /opt/vgi/csco/CSCOpx/lib/class
I let it stand for 3-5 mins, but didn't see any more procs coming back up, so I manually restarted dmgtd. My question here is: Does it really take that "long" to bring everything but up, or was I not patient enough?
After dmgtd stop, I still see some CSCOpx procs running:
    root 10304  2006   0 15:51:01 ?           0:00 /opt/CSCOpx/bin/in.tftpd -s /tftpboot
casuser 23883     1   0   Dec 23 ?           0:10 /opt/vgi/csco/CSCOpx/objects/wfengine/program/PolicyScheduler
casuser 23878     1   0   Dec 23 ?           0:05 /opt/vgi/csco/CSCOpx/objects/wfengine/program/DataStore
casuser 23880     1   0   Dec 23 ?           0:12 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGLogger
casuser 23881     1   0   Dec 23 ?           0:05 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGProxy
casuser 23889     1   0   Dec 23 ?           0:04 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGHelper
casuser 23879     1   0   Dec 23 ?           0:06 /opt/vgi/csco/CSCOpx/objects/wfengine/program/GGScript
casuser 23882     1   0   Dec 23 ?           1:25 /opt/vgi/csco/CSCOpx/objects/wfengine/program/OpsBREngine
casuser 11683     1  25 15:59:39 ?           4:11 /opt/vgi/csco/CSCOpx/lib/jre/bin/java -classpath /opt/vgi/csco/CSCOpx/lib/class
Is that "normal"? I thought in earlier versions there's none left "standing" after stopping dmgtd.

I simply let Device Pkg Update install the CiscoView Cat3560 pkg pictured earlier. It's then left unattended. The reason I developed the inclination to manually intervene at all was because I had a similar issue with LMS procs (*OGS* ones) not coming back properly in LMS 3.1 on my production box (alluded to in this thread: https://supportforums.cisco.com/message/2006396#2006396), while LMS 3.2 is currently only on my test box.
Here's the proc status around 5pm yesterday:
1.
1395
Administrator has shut down this server
0
0
0
N/A
Not applicable
2.
ANIDbEngine
Program started - No mgt msgs received
18767
0
0
01/04/10 16:37:53
Not applicable
3.
ANIServer
Running with busy flag set
19377
0
0
01/04/10 16:40:49
Not applicable
4.
CampusOGSServer
Administrator has shut down this server
0
0
0
01/04/10 16:11:30
01/04/10 16:32:15
5.
ChangeAudit
Administrator has shut down this server
0
-113
0
01/04/10 16:11:59
01/04/10 16:31:56
6.
CmfDbEngine
Program started - No mgt msgs received
19381
0
0
01/04/10 16:40:54
Not applicable
7.
CmfDbMonitor
Failed to run
0
0
6
01/04/10 16:11:14
01/04/10 16:40:58
8.
CMFOGSServer
Program started - No mgt msgs received
19460
0
0
01/04/10 16:41:10
Not applicable
9.
ConfigMgmtServer
Administrator has shut down this server
0
-113
0
01/04/10 16:11:39
01/04/10 16:32:05
10.
CSDiscovery
Administrator has shut down this server
0
0
0
N/A
Not applicable
11.
CSRegistryServer
Running normally
18809
0
0
01/04/10 16:38:02
Not applicable
12.
CTMJrmServer
Running normally
19572
0
0
01/04/10 16:41:31
Not applicable
13.
CWAPublisher
Administrator has shut down this server
0
0
0
01/04/10 16:41:50
01/04/10 16:44:38
14.
DCRDevicePoll
Administrator has shut down this server
0
0
0
N/A
Not applicable
15.
DCRServer
Running normally
19400
0
0
01/04/10 16:40:58
Not applicable
16.
diskWatcher
Running normally
19630
0
0
01/04/10 16:41:41
Not applicable
17.
EDS
Running normally
19293
0
0
01/04/10 16:40:22
Not applicable
18.
EDS-GCF
Administrator has shut down this server
0
0
0
01/04/10 16:11:39
01/04/10 16:33:46
19.
ESS
Program started - No mgt msgs received
18673
0
0
01/04/10 16:37:35
Not applicable
20.
EssentialsDM
Running normally
19468
0
0
01/04/10 16:41:15
Not applicable
21.
EssMonitor
Running normally
18677
0
0
01/04/10 16:37:39
Not applicable
22.
EventFramework
Program started - No mgt msgs received
18708
0
0
01/04/10 16:37:45
Not applicable
23.
FDRewinder
Administrator has shut down this server
0
0
0
N/A
Not applicable
24.
ICServer
Administrator has shut down this server
0
0
0
01/04/10 16:11:39
01/04/10 16:32:07
25.
IpmDbEngine
Program started - No mgt msgs received
18727
0
0
01/04/10 16:37:49
Not applicable
26.
IPMOGSServer
Administrator has shut down this server
0
-113
0
01/04/10 16:12:03
01/04/10 16:31:52
27.
IPMProcess
Program started - No mgt msgs received
19595
0
0
01/04/10 16:41:37
Not applicable
28.
jrm
Running normally
19538
0
0
01/04/10 16:41:24
Not applicable
29.
LicenseServer
Program started - No mgt msgs received
19242
0
0
01/04/10 16:40:13
Not applicable
30.
MACUHIC
Running normally
18780
0
0
01/04/10 16:37:57
Not applicable
31.
NameServer
Program started - No mgt msgs received
19246
0
0
01/04/10 16:40:14
Not applicable
32.
NameServiceMonitor
Running normally
19287
0
0
01/04/10 16:40:18
Not applicable
33.
OpsxmlDbEngine
Program started - No mgt msgs received
18796
0
0
01/04/10 16:37:58
Not applicable
34.
OpsXMLRuntime
Program started - No mgt msgs received
19641
0
0
01/04/10 16:41:46
Not applicable
35.
PMCOGSServer
Administrator has shut down this server
0
0
0
01/04/10 16:11:39
01/04/10 16:32:09
36.
ProcSysBus
Program started - No mgt msgs received
19634
0
0
01/04/10 16:41:41
Not applicable
37.
RMEDbEngine
Program started - No mgt msgs received
18713
0
0
01/04/10 16:37:45
Not applicable
38.
RMEOGSServer
Program started - No mgt msgs received
19478
0
0
01/04/10 16:41:19
Not applicable
39.
SyslogAnalyzer
Administrator has shut down this server
0
-113
0
01/04/10 16:11:59
01/04/10 16:31:55
40.
SyslogCollector
Program started - No mgt msgs received
18710
0
0
01/04/10 16:37:45
Not applicable
41.
TomcatMonitor
Running normally
18864
0
0
01/04/10 16:38:07
Not applicable
42.
UTLITE
Running normally
18784
0
0
01/04/10 16:37:58
Not applicable
43.
UTMajorAcquisition
Administrator has shut down this server
0
0
0
N/A
Not applicable
44.
UTManager
Administrator has shut down this server
0
2
0
01/04/10 16:11:39
01/04/10 16:32:04
45.
VNMServer
Program started - No mgt msgs received
18792
0
0
01/04/10 16:37:58
Not applicable
46.
WlseUHIC
Running normally
18788
0
0
01/04/10 16:37:58
Not applicable
Here's the status overnight this morning:
1.
1177
Never started
0
0
0
N/A
Not applicable
2.
1195
Never started
0
0
0
N/A
Not applicable
3.
1293
Never started
0
0
0
N/A
Not applicable
4.
1390
Never started
0
0
0
N/A
Not applicable
5.
1391
Never started
0
0
0
N/A
Not applicable
6.
1393
Never started
0
0
0
N/A
Not applicable
7.
1394
Never started
0
0
0
N/A
Not applicable
8.
1395
Administrator has shut down this server
0
0
0
N/A
Not applicable
9.
1398
Never started
0
0
0
N/A
Not applicable
10.
1399
Never started
0
0
0
N/A
Not applicable
11.
1400
Never started
0
0
0
N/A
Not applicable
12.
1401
Never started
0
0
0
N/A
Not applicable
13.
1402
Never started
0
0
0
N/A
Not applicable
14.
1403
Never started
0
0
0
N/A
Not applicable
15.
1404
Never started
0
0
0
N/A
Not applicable
16.
1405
Never started
0
0
0
N/A
Not applicable
17.
1406
Never started
0
0
0
N/A
Not applicable
18.
1407
Never started
0
0
0
N/A
Not applicable
19.
1408
Never started
0
0
0
N/A
Not applicable
20.
1409
Never started
0
0
0
N/A
Not applicable
21.
1410
Never started
0
0
0
N/A
Not applicable
22.
1562
Never started
0
0
0
N/A
Not applicable
23.
1993
Never started
0
0
0
N/A
Not applicable
24.
1996
Never started
0
0
0
N/A
Not applicable
25.
2034
Never started
0
0
0
N/A
Not applicable
26.
ANIDbEngine
Program started - No mgt msgs received
18767
0
0
01/04/10 16:37:53
Not applicable
27.
ANIServer
Running with busy flag set
19377
0
0
01/04/10 16:40:49
Not applicable
28.
CampusOGSServer
Administrator has shut down this server
0
0
0
01/04/10 16:11:30
01/04/10 16:32:15
29.
ChangeAudit
Administrator has shut down this server
0
-113
0
01/04/10 16:11:59
01/04/10 16:31:56
30.
CmfDbEngine
Program started - No mgt msgs received
19381
0
0
01/04/10 16:40:54
Not applicable
31.
CmfDbMonitor
Failed to run
0
0
6
01/04/10 16:11:14
01/04/10 16:40:58
32.
CMFOGSServer
Program started - No mgt msgs received
19460
0
0
01/04/10 16:41:10
Not applicable
33.
ConfigMgmtServer
Administrator has shut down this server
0
-113
0
01/04/10 16:11:39
01/04/10 16:32:05
34.
CSDiscovery
Administrator has shut down this server
0
0
0
N/A
Not applicable
35.
CSRegistryServer
Running normally
18809
0
0
01/04/10 16:38:02
Not applicable
36.
CTMJrmServer
Running normally
19572
0
0
01/04/10 16:41:31
Not applicable
37.
CWAPublisher
Administrator has shut down this server
0
0
0
01/04/10 16:41:50
01/04/10 16:44:38
38.
DCRDevicePoll
Administrator has shut down this server
0
0
0
N/A
Not applicable
39.
DCRServer
Running normally
19400
0
0
01/04/10 16:40:58
Not applicable
40.
diskWatcher
Running normally
19630
0
0
01/04/10 16:41:41
Not applicable
41.
EDS
Running normally
19293
0
0
01/04/10 16:40:22
Not applicable
42.
EDS-GCF
Administrator has shut down this server
0
0
0
01/04/10 16:11:39
01/04/10 16:33:46
43.
ESS
Program started - No mgt msgs received
18673
0
0
01/04/10 16:37:35
Not applicable
44.
EssentialsDM
Running normally
19468
0
0
01/04/10 16:41:15
Not applicable
45.
EssMonitor
Running normally
18677
0
0
01/04/10 16:37:39
Not applicable
46.
EventFramework
Program started - No mgt msgs received
18708
0
0
01/04/10 16:37:45
Not applicable
47.
FDRewinder
Administrator has shut down this server
0
0
0
N/A
Not applicable
48.
ICServer
Administrator has shut down this server
0
0
0
01/04/10 16:11:39
01/04/10 16:32:07
49.
IpmDbEngine
Program started - No mgt msgs received
18727
0
0
01/04/10 16:37:49
Not applicable
50.
IPMOGSServer
Administrator has shut down this server
0
-113
0
01/04/10 16:12:03
01/04/10 16:31:52
51.
IPMProcess
Program started - No mgt msgs received
19595
0
0
01/04/10 16:41:37
Not applicable
52.
jrm
Running normally
19538
0
0
01/04/10 16:41:24
Not applicable
53.
LicenseServer
Program started - No mgt msgs received
19242
0
0
01/04/10 16:

Similar Messages

  • When I attempt to open firefox an error message appears telling me that firefox is already running, but I can't find it running. How do I do so or in any case close the already running Firefox process?

    When I attempt to open Firefox instead of Firefox opening, an error message appears saying "Firefox is already running but isn't responding. To open another window please close the existing Firefox process or restart the system.", but I can't find that process of Firefox in order to kill it, and after restarting the system there is still the problem. I have found an emergency fix to at least get online, and that is to use"Firefox_Profile_Manager" in the start menu's "run" start menu, but the
    Firefox that then opens is that one doesn't carry over what I had in my bookmarks but starts bookmarks anew.

    Sounds like it is hanging when you exit and later try to restart Firefox.
    * How to stop the running Firefox process
    ** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
    ** See: http://kb.mozillazine.org/Kill_application
    **Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
    * What may cause Firefox to hang at exit
    **Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
    ** http://support.mozilla.com/en-US/kb/Firefox+hangs
    ** http://kb.mozillazine.org/Firefox_hangs
    ** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
    * You may need to try Firefox Safe Mode
    ** You may need to use '''Safe Mode''' to locate the problem: ***See: http://kb.mozillazine.org/Safe_Mode
    ***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
    ***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
    ****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
    ****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
    ****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
    ****Test to see if the problem you are experiencing is corrected.
    *** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
    ***#by enabling '''<u>one at a time</u>''' until the problem reappears.
    ***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
    ***#'''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit).
    ***#You can use "Disable all add-ons" on the Safe Mode start window.
    **See the following for more information
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
    *** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
    <br />
    <br />
    '''You need to update the following:'''
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *Shockwave Flash 10.2 r153
    *Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
    #**Use either of the links below:
    #***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
    #***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #*After the installation, start Firefox and check your version again.
    #'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
    #*Download and SAVE to your Desktop so you can find the installer later
    #*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
    #*After download is complete, exit Firefox
    #*Click on the installer you just downloaded and install
    #**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
    #*Start Firefox and check your version again or test the installation by going back to the download link below
    #*'''Download and information''': http://www.adobe.com/software/flash/about/
    #**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
    #**Use IE to go to the above site to update the IE ActiveX
    #*'''Download Manual installers'''.
    #**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
    #**Note separate links for:
    #***Plugin for Firefox and most other browsers
    #***ActiveX for IE
    #'''Update the [[Java]] plugin''' to the latest version.
    #*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    #**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
    #*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
    #*Java Test: http://www.java.com/en/download/help/testvm.xml

  • Running a process within a java program

    Hi
    I have code that runs a process for performance monitoring on an installed system. When I run the code standalone as below, it runs fine. If I include the code below inside another java program, the process fails to execute and the status returned is non-zero (failed to execute).
    The process requires the PATH and LD_LIBRARY_PATH to be set which seem to be set correctly when i print them out. So, I am not sure why the process doesnot run when included within another running java program.
    Can someone please point out what I maybe missing?
    Thanks!!
    public class RunPerf
      private static final String CLASS_NAME = "RunPerf"; private static Process proc = null;
    public static void main(String[] args)
        String INSTALLPERF_SAW_UNIX_COMMAND = "sawexe" + " " + "-perf";
             StringBuffer path1 = new StringBuffer(30);StringBuffer ldlibpath1 = new StringBuffer(30);
        System.setProperty("user.home", "/home/user");
        StringBuilder commandToExecute = new StringBuilder();
       commandToExecute.append(System.getProperty("user.home"));
       commandToExecute.append(File.separator);
       commandToExecute.append("web");
       commandToExecute.append(File.separator);
       commandToExecute.append("bin");
       commandToExecute.append(File.separator);
         String path = System.getProperty("user.home")+"/server/bin/" + File.pathSeparator + System.getProperty("user.home")+ "/web/bin";
           path1.append( path );
           path1.append( File.separator );
           path1.append( System.getProperty("java.library.path") );
           path1.append( File.separator );
          String env_value = null;
         String[] ldargs = {"LD_LIBRARY_PATH"};
         for (String env: ldargs) {
                env_value = System.getenv(env);
             System.out.println("LD_LIBRARY_PATH value before setting property= " + env_value);
                if (env_value != null) {
               String newldlibpath = System.getProperty("user.home")+ "/server/bin/" + File.pathSeparator + System.getProperty("user.homee")+ "/web/bin" ;
                ldlibpath1.append(newldlibpath);
                ldlibpath1.append(File.separator);
                   ldlibpath1.append(env_value);
                   ldlibpath1.append( File.separator);
                    System.out.format("%s=%s%n", env,ldlibpath1.toString());
                } else {
                    System.out.format("%s is not assigned.%n", env);
                 commandToExecute.append(INSTALLPERF_SAW_UNIX_COMMAND);
                   String[] envp =   { "USER_HOME =" + "/home/user",          "PATH=" + path1.toString(), "LD_LIBRARY_PATH=" + ldlibpath1.toString() };
               int status = executeCommand1(commandToExecute.toString(), envp,null);
                   if(status != 0){
                          System.out.println("Unable to run perf Unix") ;
         public static int executeCommand1(String command,String[] envp, Logger logger) {
            String METHOD_NAME = "executeCommand1";
            if (logger == null) { logger = Logger.getAnonymousLogger();}
            logger.entering(CLASS_NAME, METHOD_NAME, new Object[] { command, envp});
            Runtime runtime = Runtime.getRuntime();
            runtime.addShutdownHook(new Thread() {
                        public void run() {
                            if (proc != null) {     try {  proc.destroy();  if (proc != null) { proc.destroy();  }
                                } catch (Exception e) {
                                    e.printStackTrace(); }      }      }     });               
                           int retVal = 0;
          File cwd = new File(System.getProperty("user.home")+ "/web/bin/");               
                           try {
                               if (envp != null) {   proc = runtime.exec(command, envp,cwd); }
                                       else {  proc = runtime.exec(command); }
                               Thread t_err =        new Thread(new StreamReader(proc.getErrorStream()));
                               t_err.start();
                               Thread t_in =     new Thread(new StreamReader(proc.getInputStream()));
                               t_in.start();
                               retVal = proc.waitFor(); } catch (IOException e) {        retVal = -1;   logger.severe("IOException");      }
                                     catch (Exception e) { retVal = -1;        logger.severe("Exception");                  }
                     logger.exiting(CLASS_NAME, METHOD_NAME, retVal);
                     return retVal;
    static class StreamReader implements Runnable {
            InputStream in;
            public StreamReader(InputStream genericStream) {   in = genericStream;   }
            public void run() {
                try {
                    String strTemp = null;
                    BufferedReader buffReader = new BufferedReader(new InputStreamReader(in));
                    while ((strTemp = buffReader.readLine()) != null) {
                        System.out.println(strTemp);                }
                } catch (Exception e) {               e.printStackTrace();            }        }    }}

    Either set up a script before the program runs or have the
    program write a script file which contains the statements
    that need to be executed. Then you will be able to
    execute the script with a call to
    Runtime.getRuntime().exec()Mark

  • Error while running the process chain

    Hi, I am getting following error while running the process chain.
    "Lock NOT set for: Deleting the data completely from a data target"
    Please suggest.
    amit

    hi,
    This is due to a lock on the objects which is being used by ur load.
    Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
    If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
    some general locks during loading:
    Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
    There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
    You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
    if u see in SM 37 this load would have three DTP processes running.
    it should have only two.
    In this case cancel the process and repeat it untill u get it right.
    hope this helps u
    regard,
    ranjith
    Edited by: Ranjith  Kumar Murugesan on Sep 12, 2008 10:44 AM
    Edited by: Ranjith  Kumar Murugesan on Sep 12, 2008 10:46 AM

  • Error while running BPEL Process with Oracle Apps Adapter.

    Hi All,
    I am trying to configure the oracle apps adapter in JDeveloper.
    Here my EBS is running on different database where as SOA is installed on different database.
    I am able to properly configure the adapter & deploy the process to weblogic server.
    But when I am trying to run the process I am getting following errorr.
    <p>
    The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510\nJCA Resource Adapter location error.\nUnable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>\nThe JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='*<JNDI Name passed in Oracle apps Adapter.>*'.\nThe reason for this is most likely that either \n 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or \n 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to <JNDI Name passed in Oracle apps Adapter.>
    </p>
    Please suggest the solution for the same.
    its really urgent . waiting for reply.
    Edited by: aumathe on Dec 16, 2010 2:33 PM

    Have you created a connection pool with the JNDI specified while configuring adapter in Oracle Apps adapter on weblogic admin console. You should create it at Deployments --> OracleAppsAdapter --> Configuration--> Outbound Connection pools
    Make sure to update the adapter after creating a connection pool so that changes can take effect.
    Regards,
    Anuj

  • RFC ERROR while running BI Process Chain

    I'm recieving the following error while running certain Process Chains in BI.
    RFC error: FAILED
    RFC Message: FAILED
    The system log in BI shows the following.
    Communication error, CPIC return code 017, SAP return code 672
    672 Logon to Netweaver failed
    Other process chains work correctly via CPS.
    Any Ideas?
    Thanks

    This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

  • Process chains get an error when run analysis process

    When my PRD system‘s process chains run analysisi process, I  gets below error message:
    Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
    Message no. BRAINOLAPAPI011
    Diagnosis
    Failed to start the MDX parser.
    System Response
    Error when opening an RFC connection (FUNCTION: 'R
    Procedure
    Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
    It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
    The Sys Log in Transaction SM21(error part):
    M Wed Mar 19 09:22:50 2014
    M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
    M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
    A  RFC 1878  CONVID 18933904
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
    A  RFC> User: JY-LKZ (Client: 900)
    A  RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
    A  RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
    A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
    FUNCTION: 'RfcExecProgramKernel'
    RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
    [abrfcio.c    9213]
    A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    M
    M Wed Mar 19 09:23:15 2014
    M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
    M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
    A  RFC 1878  CONVID 18968493
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
    A  RFC> User: TMSADM (Client: 000)
    A  RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
    A  RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
    A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
    FUNCTION: 'RfcExecProgramKernel'
    RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
    [abrfcio.c    9213]
    A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE.
    ps.
    1、IT's everything ok in the development system.
    2、It’s ok when i repeat this analysis process .
    3、It’s ok when i run this analysis process in analysis process designer.
    4、Attachment is the sys log in sm21.
    Thanks everyone.

    Hi Vignesh.B,
    Yes,it's not user's problem . But i don't  think it APD's problem .Cause all APD has the same problem and .
    Below is one of APD souce and target :
    Hope this information  is useful .
    Regards,
    Lian

  • How to run a process flow in recovery mode

    Hi,
    I have 10 Mappings in a Process Flow. While executing that process flow, All of sudden It got errored out at 5th mapping.
    Please explain me how to run the process flow again from the 5th mapping( which got errored out in the previos run)....i.e I do not want to run the first 4 mappings in that process flow again, I want to run only the remaining mappings in the process flow.
    Please let me know in case you need more information / explaination.
    Thanks in advance...

    Hi
    On the question of process flows and resuming the following article gives some ideas, it has to be designed in the process flow basically;
    http://www.rittmanmead.com/2008/05/resuming-your-etl-process-in-owb/
    The article describes some ideas and techniques for tracking success/failure of flows and restarting.
    Cheers
    David

  • ABAP PROGRAM to run a process chain

    Hello all,
    What is the ABAP program to run a process chain after a step that has failed but is manually corrected?
    In short a std ABAP program to run a pc.
    Regards,
    NIKEKAB

    Hi.
    Plz see my answer to similar question in [this thread|Re: Manage a message at the end of process chain on Web planning Application].
    Regards.

  • Error in 'eMail Response - Process Message' --- Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(

    Hi,
    When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
    Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
    I increased the log level to 5 and got the below message in log file
    ObjMgrBusServiceLog    InvokeMethod    4    0000000251b51f04:0    2013-06-10 01:30:12    Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
    ObjMgrBusServiceLog    Error    1    0000000251b51f04:0    2013-06-10 01:30:12    (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
    I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
    Can any body help me out in this regard.
    Thanks in advance..
    Jagadeesh

    Hi Naresh,
    yes, I am using the delete polling strategy. Here is the .jca file:
    <adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
    <endpoint-activation portType="Pozadavky_ptt" operation="receive">
    <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
    <property name="DescriptorName" value="Pozadavky.Pozadavky"/>
    <property name="QueryName" value="PozadavkySelect"/>
    <property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
    <property name="PollingStrategy" value="DeletePollingStrategy"/>
    <property name="PollingInterval" value="120"/>
    <property name="MaxRaiseSize" value="1"/>
    <property name="MaxTransactionSize" value="10"/>
    <property name="NumberOfThreads" value="1"/>
    <property name="ReturnSingleResultSet" value="false"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>

  • Running of process flow does not show any Active session in Database

    Hi Team,
    I am running a process flow in OWB 11g ( From Design Center ) which is having around 100 maps within it. However, from Control Center I can see the Process Flow is running ( i.e. Green check is visible beside the process flow) but when I run SQL query in backend database ; I am unable to see any running object ( i.e. OWB map name as package object) there corresponding to this Process Flow
    I am running the below query to check the availability of running session :-
    SELECT A.LOGON_TIME,A.SID,B.OBJECT_NAME,A.*
    FROM gv$session A, dba_objects B
    WHERE A.PLSQL_ENTRY_OBJECT_ID = B.OBJECT_ID
    AND A.STATUS = 'ACTIVE'
    Could you please suggest if this is something wrong in the development of the Process Flow or we can`t see any running map there in backend when we execute any process flow from OWB ?
    Thanks in advance
    Nilava Sen

    Try below query
    select sid,module,program,status,sql_id from gv$session where status='ACTIVE';
    select * from gv$access;

  • Problem in Activating Hierarchy Attribute change run through process chain.

    Hi All,
    I have the problem in Hierarchy change run processw running through process chain..and also process chain completes successfully without any error..
    Even hierarchy change run  completes successfully the hierarchy objects are not activating,
    so daily when i have to activate hierarchy objects manually..
    and what i did was in one attributechange run process i have included 10 hierarchy object is it correct or else i have to separatly create 10 attribute change hierachy proceess in the process chain.. pls through some lights on this issue
    With regards,
    Hari

    Hi venkat,
    Yes.. i already include the save hierarchies process in process chain...
    my main problem is hierarchy infobject are not activating  using process chain and also even process chain is not giving error message.. and in which log table the hierarchy objects are maintained (such as run time, date , status etc..).
    IS there is any other settings to be made in process chain..
    with regards,
    hari

  • Firefox nor firefox-uninstaller will not open although I can see that they are running in "Processes" meaning I can't open it nor uninstall it.

    If I try to open firefox or uninstall firefox, nothing happens. I see that they are running in "Processes" but that is all. I can't open it; I can't uninstall it. Any ideas? I've checked my hard drive for errors, no viruses, all other programs perform as designed. Thanks in advance.

    Sometimes the Firefox window gets "off screen" somehow. You often can force it to appear on the screen by right-clicking the little thumbnail image above the Taskbar and choosing Maximize. Does that work?
    One possible cause for this is that the file which stores window sizes and positions has become corrupted.
    '''Method #1:''' ''If you can get a maximized window:''
    Open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This should launch a new window listing various files and folders in Windows Explorer.
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    Pause while Firefox finishes its cleanup, then rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
    Start Firefox back up again. Do windows display normally again?
    '''Method #2:''' ''If you cannot get a Firefox window at all:''
    Shut down Firefox by right-clicking the taskbar icon > Close All Windows.
    Using the Run dialog (windows key + R) or the Start menu search bar (or in Windows 8 maybe the charms bar search bar?) type or paste the following and press Enter to drill down to the Profiles folder:
    %APPDATA%\Mozilla\Firefox\Profiles
    Here you may see one folder -- in which case, double-click into that -- or more than one folder -- in which case, double-click into what looks like the most recently updated.
    Scroll down and rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
    Start Firefox back up again. Do windows display normally again?

  • Authorizations setting for running the process chain

    Hai
    Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
    so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id.  I have all authorization rights .
    Pls let me knw
    kumar

    Hi,
    Authorizations for Process Chains
    Use
    You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
    ·        You control whether a user is allowed to perform specific activities.
    ·        You control whether a user is allowed to schedule the processes in a chain.
    The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
    See also: Display/Maintenance of Process Chain Attributes ®  Execution User.
    Features
    For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
    To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
    Display/Maintain Process Chain Attributes
    Use
    You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
    Features
    You can display or maintain the following attributes for a process chain:
    Process Chain ® Attribute ® ...
    Information
    Description
    ( Rename)
    You can change the name of the process chain.
    Display Components
    Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
    To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
    Documents
    You can create and display documents for a process chain.
    For more information, see Documents.
    Last Changed By
    Displays the technical attributes of the process chain:
    ·        When it was last changed and who by
    ·        When it was last activated and who by
    ·        Object directory entry
    Evaluation of Process Status
    If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
    The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as “unimportant” for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in “unimportant” processes of the subchain.
    Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
    Polling Indicator
    With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
    With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
    By selecting the indicator:
    -         A high level of process security is guaranteed, and
    -         External scheduling tools can be provided with the status of the distributed processes.
    However, the system uses more resources; and a background process is required.
    Monitoring
    With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
    By default CCMS switches on the automatic process chain monitoring.
    For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
    Alerting
    You can send alerts using alert management when errors occur in a process chain.
    For more information, see Send Alerts for Process Chains.
    Background Server
    You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
    Processing Client
    If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
    If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
    Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
    This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC)  The chain is activated after import and scheduled, if necessary, in this client.
    Execution User
    In the standard setting a BI background user executes the process chain (BWREMOTE).
    You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
    The setting is transported.
    The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
    Job Priority
    You use this attribute to set the job priority for all of the jobs in a process chain.
    Hareesh

  • How to run a process PSPPYRUN or PSPPYBLD in PeopleSoft Test Framework ?

    How to run a process PSPPYRUN or PSPPYBLD in PeopleSoft Test Framework ?
    Please advise on the below scripts ,
         1          True          Browser     Start_Login          
         2          True          Browser     Set_URL     PORTAL     
         3          True          Link     Click     id=fldra_HC_NORTH_AMERICAN_PAYROLL     
         4          True          Link     Click     id=fldra_HC_PROCESS_PAYROLL     
         5          True          Link     Click     id=fldra_HC_CREATE_PAYSHEETS     
         6          True          Link     Click     innerText=Create Paysheets     
         7          True          Browser     FrameSet     TargetContent     
         8          False          Page     Prompt     MANAGE_PAYROLL_PROCESS_US.RUNCTL_PAYSHEET.USA     add update
         9          True          Text     Set_Value     Name=PRCSRUNCNTL_RUN_CNTL_ID     AA
         10          False          Page     PromptOk          
         14          True          Button     Click     Name=#ICSearch     Search
         11          True          Text     Set_Value     Name=PAYSHEET_RUNCTL_RUN_ID     K01FIN
         12          True          Page     Save          
         13          False          Process     Run     prcname=psppybld;prctype=COBOL SQL;wait=True     
         18          False          Process     Run     prcname=psppybld     
         16          True          Process     Run     wait=True;expected=Success;     
         15          True          Button     Click     Name=#ICSave

    Build M33.106 is not available in service market place yet.
    SAP informed that customer can not find information on the next build release date from Product Availability Matrix (PAM) or anywhere from SAP site.
    Is there a way to get his information from Redwood site? Like when is the expected date for next release of the build?
    Thanks
    Nanda

Maybe you are looking for

  • Closing stock by referring J_1IRG23D table

    Dear All, I have 3 different production plant (P-1, P-2, P-3) These 3 plants produce same material and send to Depot plant. So once production plant send material to depot plant then RG1 register get upate at prodution plant and once depot plant rece

  • Issue while starting AdminSerever using wlst commands

    Hi, I am facing issue while trying to start the AdminServer and Managed Server via nodemanager using wlst commands. I have installelled WebLogic 11g on windows 2008 R2. Mentioned below are the steps that I followed: 1) In Nodemanager.properties files

  • Photoshop Elements 7 editor won't open

    I have Photoshop Elements 7. The organizer, create and share tabs work fine but when I try to open any 3 of the editor modes I get the error message: Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable. I

  • Hierarchy variable description not displaying correctly

    Hi all, I'm using 0ORGUNIT hierarchy variable in several queries either based on the characteristic 0ORGUNIT, or based on the navigational attribute 0EMPLOYEE_0ORGUNIT. When I execute the query with 0EMPLOYEE_0ORGUNIT hierarchy variable the selection

  • Duplicates in Shared Photostream in iOS Photos, Mac OS X iPhoto, AppleTV, but not iCloud Web

    Just started using the shared Photostream feature today, and we noticed that the first shared Photostream we tried duplicated all the photos that were shared if viewed from iPhoto or AppleTV. The web site for the shared Photostream does have exactly