LMS 3.2 some devices appear by IP not hostname

dears
i've problem in LMS 3.2 that some devices appear in RME by ip not hostname although they are in HOSTS file !
i tried to use resolver.pl tool and it can fetch the host name when typing the ip but devices still appearing by ip  !
i'm using Comon Services 3.3

The device which are already in LMS DCR would stay as it is, if they are added by IP already.
If you are sure all the devices are in hosts file, than you should modify your scheduled discovery job for Update DCR Display Name check box.
Select this checkbox if you want to update the display name of the devices that already exist in DCR, in the next Device Discovery cycle.
For example, consider a device which is discovered by Common Services Device Discovery, exists in DCR with the display name as its hostname.
If you change the Preferred DCR Display Name as IP Address for the next Device Discovery, Common Services Device Discovery will update the display name of the device as its IP Address in DCR after the next Device Discovery.
The display name of devices are not overwritten in the future Device Discovery cycles if you have not selected this option.
For more details check :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/user/guide/dcr.html#wp1469536
-Thanks

Similar Messages

  • Some devices in MBP are not working in win7 with bootcamp drivers

    Hi.
    I've just got my new mac book pro 15", with SSD 255 disk and hi-ress antiglare screen. I've used bootcamp to partition the disk and I've installed windows 7 64bit pro Greek.
    The problem is that, after installing the bootcamp drivers, some hardware, do not work or recognized. eg, the trackpad, the keyboard, the wireless adapter, etc.
    I've tried to install again and again from the disk, and make any internet updates, but, nothing happens. When I'm installing by single file in boot camp dvd, says, that the driver is not support the OS's language (greek).
    Is there any suggestion for my problem? (In mac OS X there are no problems)

    Hi!
    Unpack the installer files. (I've used winrar for this.)
    Find the DPInst.xml file, and open with Notepad.
    Change the Australian language code to Greek (0x0408) here:
    <!-- ***************************************** -->
    <!-- English -->
    <!-- ***************************************** -->
    <!-- Australia -->
    <language code="0x0C09">
    <eula type="txt" path="EnglishLicense.txt"/>
    </language>
    Save the file, and run DPInst.exe
    Have fun!

  • Some device fonts not appearing under 11.0.1.152

    Mac OSX 10.7.1 (Lion)
    Safari 5.1
    Firefox 6.0.2
    I have several swfs published for FP 10 & 10.1 which have been working fine under FP 10.3.182.10 in both Safari and Firefox.
    The swfs have code that displays a device font ("_sans") for certain languages, such as Greek, Russian etc. After upgrading to 11.0.1.152 some of the device font text is not appearing. I say some as it stills appears correctly in some places but not everywhere.
    I have re-installed 10.3.182.10 and it works perfectly again in both browsers.
    In case this problem was related just to the browser plug in I also installed the standalone player for 11.0.1.152 (Flash Player Debugger) and ran the swf from my desktop by double clicking it. Once again the fonts stopped displaying correctly.
    If I run Test Movie from within Flash Professional, the text appears correctly as I have installed 10.3.182.10 as the version under "Players" in the Flash Professional installation folder.
    Can anybody shed any light on what is going on here?

    I think I have been able to replicate the issue.
    My swf has some dynamic text under a mask which by default is set to display as Arial. By changing a Boolean variable to true, I set the text field to use a new TextFormat which has a font property "_sans".
    Here is the complete code:
    import flash.text.TextFormat;
    var useDeviceFont:Boolean = true;
    if (useDeviceFont) {
              var format:TextFormat = new TextFormat();
              format.font = "_sans";
              myClip_mc.myText_txt.embedFonts = false;
              myClip_mc.myText_txt.defaultTextFormat = format;
    myClip_mc.myText_txt.text = "Hellobvxcxcvbnrsdjytfkugilhdjgsfhjkl";
    The result is that with FP 10.3.182.10 installed I can see the text. but with 11.0.1.152 the text does not appear. Here are two screen shots:
    My system is Mac OS X 10.7.2
    Safari 5.1.1
    Message was edited by: yachts99
    I can also see the same issue when viewing the swf in the standalone versions of the player.

  • Why do only some photos appear in iCloud folder on my PC and not all taken on iPhone appear on iPad either? All settings seem correct and new photos now seem to be appearing on all devices, but not all older or recent photos

    Why do only some photos appear in iCloud folder on my PC and not all taken on iPhone appear on iPad either? All settings seem correct and new photos now seem to be appearing on all devices, but not all older or recent photos, even if taken at same time. All advice greatly appreciated.

    First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
    Matt

  • LMS 3.2. Campus Manager (5.2.1) and some devices in "Not Managed" state

    Hi:
    I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 13 devices in Not Managed state, include C2950G and C2960S . But 3 sets of C2950G can be managed . What is this? How can I fix it?
    I attach ani.log file
    Thanks

    Try to remove the Auto-sync mode and try to add those 13 devices manually and run Data Collection and check if they get added.
    -Thanks
    Vinod

  • LMS 4.2.2 Fault manager does not resolve hostname for some devices

    This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
    As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server.
    The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
    The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.

    The problem may occur if the lookup was not possible when the device was added to fault management. 
    Faultmanager, unlike the rest of LMS, does not update the display name.
    If the resolver.pl in /opt/CSCOpx/bin is able to get the device name, then resolution is fine.
    The only workarrounds are to the delete the device from LMS and re-add it, or use cli tools on the server to remove and re-add the device from the DFM repository.
    Cheers,
    Michel

  • Some devices are not installed

    Hello:
          I think that I already installed all the drivers in my W520 but it still showing that some devices are not installed
    In "Other devices" I have the folowing four entries:
    -  Base system device
    - Biometric Coprocessor
    - F5521gw
    - PCI Serial Port
    Could someone help me to identify which drivers I still need ??
    Thanks for the help.
    Regards.
    Solved!
    Go to Solution.

    Hi Turco:
    Download the "System Update" application from this link, install it, and run it.
    This Lenovo application will then fetch the four missing items you list and install them automatically.  It will also check to make sure all the other drivers are up to date.
    The 'biometric coprocessor' is probably the fingerprint reader.  The 'F5521w' is the cell phone modem.  I don't know what the other two items are.
    If you need a list of all the drivers available for your machine, you can get it (and the drivers themselves) from this link, which is the Device Driver File Matrix (DDFM) for the W520.
    But, honestly, it is a heck of a lot simpler, easier, and faster to just download "System Update" and let it do all the work for you.  In fact, you might even have that application on your computer already - just click on the Windows 7 orb (the coloured ball with the flag on it) and type "System Update" into the search box, if it is installed, you will see it appear in the results list.  If it appears, click on it and run it.
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • Hello, I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13..

    Hello,
    I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
    SO PLEAZZZZZ HELP!!!!!

    An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.

  • Do MIDI Devices Appear In GB Prefs?

    I'm having some problems with the input of my MIDI keyboard. After I've installed the drivers, selected the keyboard in Audio MIDI Setup, etc. will the USB device appear in GB Preferences? Right now it says that a MIDI device is detected, but under Audio Input the only choice is "Built-In Audio." I'm at a loss!

    Thanks. That answers my question!
    Still, I can't figure out why it's not recording properly. If I only play one note at a time, it's fine. More than one, and they start to sustain even when I've stopped pressing keys. Plus I get a low, pulsing sound underneath. Boo, Midisport Uno. Boo.

  • Hello, I have a problem with the keyboard of the device, some of the keys do not respond. What can I do?  Amit

    Hello,
    I have a problem with the keyboard of the device, some of the keys do not respond.
    What can I do?
    Amit

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings (if you can)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Some devices not displayed in my Network topolgy

    Hi ,
    i have some devices ( existing in my RME ) but not displayed in my Network topolgy. what's the problem ??
    i have CW 3.1
    Thank you ,

    Hi,
    I have some problem with LMS 4.0.1
    Thanks

  • 7th Gen Non and iMac appear on each others device list but will not connect

    My new 7th Gen nano and imac appear in each others blue tooth devices list but will not connect.   I've tried several time and have reset the nano twice. All suggestions greatfully received.
    Al

    Hey Al,
    I read that your iPod nano is compatible with the following Bluetooth items: headsets, speakers, and hands-free systems in some automobiles. These are the profiles it supports:
    Advanced Audio Distribution Profile (A2DP)
    With the Advanced Audio Distribution Profile, you can stream high-quality audio (stereo or mono) from one device to another over a Bluetooth connection. Use it to play music wirelessly from iPod nano to a wireless headset or a compatible car audio system.
    Audio/Video Remote Control Profile (AVRCP)
    With this profile, you can remotely control playback functions on the iPod nano from compatible devices (commonly Bluetooth devices that use the A2DP profile). iPod nano works with the pause, play, stop, next track, and previous track commands.
    Bluetooth Low Energy (BT LE)
    Use low-powered Bluetooth accessories with the Bluetooth Low Energy profile. iPod nano works with Bluetooth Smart Heart Rate Monitors.
    via: iPod nano (7th generation): Supported Bluetooth profiles
    http://support.apple.com/kb/HT5479
    That sounds like it might be why you're having difficulty connecting. If you want to sync your iPod nano with iTunes, I'd read through this document:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1386
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

    I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

    If you can connect to your wireless network and you're using an Apple AirPort Base Station, then simply use AirPort Utility. From the Base Station menu, select Show Passwords...
    Or, reset your wireless network password by momentarily depressing the reset button on your AirPort Extreme, Express, or Time Capsule. Press the button for one full second, no more. Then, configure a new password using AirPort Utility.
    If you can't connect to your wireless network, or you are not using an Apple AirPort Base Station, you can use the procedure that follows below to retrieve it from your Mac's Keychain.
    Your wireless network password is stored in your Mac's Keychain.
    You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
    On that Mac, open the Utilities folder. Find Keychain Access and launch it.
    In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
    Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
    If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
    Double-click that, and in the window that appears check the box for "Show password".
    You will get the following window:
    In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
    Then, click Allow, and your wireless network password will appear in the "Show password" field:
    Make note of it.
    Close the window, then quit Keychain Access.

  • Whenever I updated or downloaded a new app from the App Store, a message appears saying:   "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."   I made some research onl

    Whenever I updated or downloaded a new app from the App Store, a message appears saying:
    "Account Not In This Store
    Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
    I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
    When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
    "This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
    So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
    I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
    Can anyone help me please?
    Arian

    Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
    If you keep encountering problems contact iTunes support. They will help you sort it out.

  • My iPhone4 docks correctly with some devices but not others, please help!

    Hi,
    Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
    I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
    *Phone used to dock fine with anything and everything - this was about 1 year ago.
    *for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
    *symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
    *I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
    *I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
    *2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
    * now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
    *just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
    to my knowledge it is NOT;
    - a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
    - a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
    -a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
    could it be a problem with the data exchange between phone and device when it is docked??
    or do I really need to try changing the port for an 'official' one??
    or is it just broken and that's that?!

    It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

Maybe you are looking for