LMS 4.0.1 End Host display issue

Using LMS 4.0.1.
When looking at the Device Centre - Troubleshooting view for a device it will display the number of End Hosts in the Configuration Status>Configuration Details section. If I click on the number of devices a pop-up will appear saying "No end hosts found", however if I go to Reports>Inventory>User Tracking and run the report it displays the end hosts correctly
I would appreciate assistance on what could be causing this issue. It was happening with Lms 4.0 but upgrade to 4.0.1 did not change it.

michel.hegeraat wrote:Try to grab the url it gives. Something like:http://didata:1741/cmapps/utEndHostReport.do?action=Submit&crossLaunch=admindashboard&runTypeOption=Immediate&devName=lab-SW23&devIP=10.170.46.250Check if these to guys are correct and resolvabledevNamedevIPCheers,Michel
Below is the url from a sample device (this problem occurs with all I have checked so far) that appears when I click the numeric End Hosts quantity from the Device Center - Troubleshooting page
http://lmsnetmgr:1741/cmapps/utEndHostReport.do?action=Submit&crossLaunch=admindashboard&runTypeOption=Immediate&devName=Gosford NOC Sw 2&devIP=10.76.152.56
When I use the same Device name or Device IP when running a end host query from Reports>User Tracking>Quick reports I get the correct end hosts displayed. The quantity displayed corresponds with the quantity shown on the Device center - troubleshooting page
So - the problem is not related to using an incorrect device IP or Device Name

Similar Messages

LMS 4.2.3 End Host not found

When I go to Troubleshooting Workflows. Select a switch, select View the switch, then scroll to end hosts, it tells me that their is no end hosts found. However if I search for end hosts, it shows the end hosts that are connected to the switch.

Hi Afroj,
the OID (1.3.6.1.2.17.4.3.1.1) not walk
[srvlms/root-ade ~]# snmpwalk -c iptread x.x.x.x.1.3.6.1.2.1.17.4.3.1.1
SNMPv2-SMI::mib-2.17.4.3.1.1 = No Such Object available on this agent at this OID
the OID (1.3.6.1.4.1.9.9.156.1.1.2.1) not walk
[srvlms/root-ade ~]# snmpwalk -c iptread x.x.x.x 1.3.6.1.4.1.9.9.156.1.1.2.1
SNMPv2-SMI::enterprises.9.9.156.1.1.2.1 = No Such Object available on this agent at this OID
and if tape the simply snmpwalk it's ok:
[srvlms/root-ade ~]# snmpwalk -c iptread x.x.x.x
SNMPv2-MIB::sysDescr.0 = STRING: Linux release:2.6.18-194.26.1.el5PAE machine:i686
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.1348
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (240048448) 27 days, 18:48:04.48
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING: CCM-FR-SUR-PUB
SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 72
IF-MIB::ifNumber.0 = INTEGER: 3
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: sit0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: tunnel(131)$
mumm strange

LMS 4.2.5 - UserTracking Connected End Host Report not useable

Hi all,
trying to understand the different available UserTracking-Reports (Active End Host Report, Dormant End Host, Connected End Host) provided by UserTracking Summary Portlet I struggled with understanding the Connected End Host Report.
In Docs an End Host in status connected is: End hosts that are connected to the network but do not have its MAC address entry in the connected switch CAM table.
Executing this Connected End Hosts Report I'm not able to understand the output:
    User Name MAC Address Host Name IP Address Subnet Status Switch Port VLAN Last Seen
1.             Connected      Fa0/2 AK-ETH23 14 Dec 2014, 05:17:44
2.             Connected      Fa0/13 VLAN0178 14 Dec 2014, 05:17:44
3.             Connected      Gi0/15 inactive400 14 Dec 2014, 05:17:44
4.             Connected      Fa4/13 VLAN0924 14 Dec 2014, 05:17:44
5.             Connected      Gi0/18 inactive400 14 Dec 2014, 05:17:44
With this output nobody is able to correlate anything; simply a port and a vlan is seen, but no endhost-information/switch or switchport information!
As this can be seen on different LMS installations, it seems to be a general issue.
Anybody out the having further information?
Thanks for your valued feedback.
Lothar

Still no explanation from the experts?
Thanks
Lothar

LMS 4.1 with CUCM 8.0.2 Phones only detected as End Hosts

Hi,
looks like I still have an issue with LMS to recognize the IP Phones in UT as IP Phones.
SNMP RO on Call Manager is enabled and is green in CM (e.g. topology) - so SNMP get is basically fine.
The Phones are recognised as End Devices in UT.
As far as I understand, now if I start a Phone Aquisition, the CUCM is polled by LMS to gather additional information about the phones.
So it seems there is a problem with the SNMP polling of the Callmanager?
thanks for any help!
br.herwig

Yes, its in DCR
below the device status of the Callmanager:
20.
192.168.2.10
Callmanager
192.168.2.10
1.3.6.1.4.1.9.1.583
Cisco 7825H Media Convergence Server
The phones are collected by UT as end hosts (it is seen through the voice vlan called "UC"):
But this phones are not recognized as phones in UT:
thanks,
br.herwig

End User - ESS Timesheet Display Issue

Hi All,
Hopefully I have posted this in the correct forum. I tried to search of the issue I have for an end user but had no success, so I thought since my post graduate study surrounds ERP systems and work with SAP every day, I though it was best to register.
Now the issue I have here is, when the user goes into their portal ESS to view their timesheets, the display is unsual. They do not have an option to manually go back to previous weeks and the view of their timesheet is 'squashed' in (Timesheet Entry View) but if you scroll across to the right where the date and 'go to' function is, it has been cut off. There are no issues with any other users so it appears to be a local issue
Currently, I have reverted back to IE7, checked for any add on's that may cause display issues, I have checked their roles and everything is normal. The only issue I can see is some conflicting issues is with the Browser and SAP.
Any help will be appreciated.
Edited by: A_Ali_ on Jul 19, 2011 1:05 AM

Check the configuration setting for the profile that's being used by ESS. As this is where you can restrict user's ability to navigate forward and back from current week etc.
Cheers,
Brad

Lms 4.2 Cannot enable End Host Discovery on Trunk

Hi...
I have noticed that our LMS does not collect any information about wireless users connected to autonomous access points, although I can see the mac address of the wireless users on the switch (2960) Trunk port connecting to the AP via CLI. I can also get the IP address from the core switch. Even after selecting 'Perform Data Collection' on the AP in the topology, the Wireless End hosts report remains blank.
I am trying to enable the option 'End host Discovery on Selected Trunks' in the 'Acquisition configuration in Trunk' menu and after selecting the switch where the AP resides and clicking 'show Trunk' I get the message 'there are no trunks in the device(s) selected', although there are several trunk ports on this switch, other than the one connecting to the AP. The switch and the AP are managed by LMS. We are facing this problem with all Autonomus APs. We do not use WLSE. Is there something missing to discover these Wireless hosts ?
All help is appreciated

Is it safe to set UTGetVlansWithUserPorts=0 in the NMSROOT/campus/etc/cwsi/ut.properties ? I have seen this in a previous discussion, but thath was related to LMS 3.1, not 4.2
Regards

Wireless End Host Report LMS 3.2

We are having LMS 3.2 with Campus Manager 5.2 , I have added our WisM (Wireless Integrated ServiceModule) in the LMS and it shows that the device is reachable , we get inventory , run jobs etc . However when I try to get the End Host Report for this device it shows that no hosts found
I have configured SNMP v2 read only settings on the controller and the LMS
I wanted to know will we get End User Reports from the WiSM / Cisco 4402 controllers. Is there some more config etc need to be done
Regards

Thanks Joe
Will the WLC be supported in any future releases
Regards

LMS 4.0.1 User Tracking Problem "No end hosts found"

Hi everybody,
I have problems with devices that do not appear in the user tracking utility.
These devices are a cisco WS-C4506-E with Supervisor II-Plus-10GE and two WS-C6509 with Supervisor Engine 720.
When I start acquisition for the devices I receive following message: "Device unreachable". When I try to watch the end hosts, I get following Message: "No end hosts found."
I have patched LMS 4.0.1 with CSCto06189 Patch.
Is there perhaps a solution?
Roman

400 devices - do you mean 400 end users?
Do they all use a Layer 3 default gateway that is among your discovered and managed devices?
Have you followed the steps and troubleshooting from around page 24 of this guide?

LMS 4.2.4 - report check "end host" list

Hi All,
     I have a list of 26 "end host" identify by mac-address. I would like to generate every day a report to check that these devices exist on the network.
     If you can help me about this task? do i have to use "user tracking" ?
     Just for precision ...it is not "network device" but "end host" devices (PCs)
Thanks for your help.
Regards.

Still no explanation from the experts?
Thanks
Lothar

LMS 4.2.4 User Tracking End Host Report The system cannot find the path specified

Hello at all,
I have a problem when creating a scheduled User Tracking End Host Report.
I always get the message "The system cannot find the path specified" and the job fails.
An immediate report is successful.
I tried to change the "Report Publish Path" from "C:/Program Files (x86)/CSCOpx/" to "C:/PROGRA~2/CSCOpx/", but that did'nt worked.
Has anybody an idea?
Regards, Kerstin

Share the screenshot of the following directory :
NMSROOT\CSCOpx\campus\etc\cwsi
In case it is blank, try following :
1.Stop the services : net stop crmdmgtd
2.Take a copy of > C:/Progra~2/campus/etc/users and place it under C:/Progra~2/campus/etc/cwsi
3.Start the services : net start crmdmgtd
Please try and let me know the updates.
-Thanks
Vinod
**Encourage Contributors. RATE them.**

Hosted Display Mode issues

I have a .NET portlet with a dropdown list of values. When a user clicks on a value it does a Response.Redirect to another aspx page and show info about that value. The new page is set to be in hosted display mode. i.e. a page showing a big list of values with the portal header and footer.
My portlet keeps on showing these values in the same portlet as the list, instead of in a new hosted page. We are using .NET web controls 3.0 and ALUI G6.1

How are you setting the property - programatically or via the webservice properties?
We did an upgrade and found that if you set this property twice programatically, it fails (J2EE - it was set in the JSP and the action). It used to work with version 5.0.4J but fails with 6.1. The fix is to leave the code as it is and override this property by checking the hosted display mode check box for the web service.
-Dev

End Host IP Address not seen in the UserTracking Report

hi,
After the successful completion of Device Discover (Common Services) and Data Collection (Campus Manager, whenever the end host reports are generated, only the mac address is seen, the ip address and subnet mask fields are blank.
The LMS version is 3.2.1
Campus Manager version : 5.2.2
Ping Sweep is also enabled under the Acquisition settings.

The issue has been resolved. now the IP addresses and the Subnet infomation is displayed in the User Tracking Reports. The problem was, that no Layer 3 device was added in the LMS. as per the document:
ANI reads the ARP table from the Layer 3 devices it discovered to map the MAC addresses to IP addresses. If UserTracker shows the MAC addresses, and the IP address and hostname fields are empty, chances are that ANI does not discover the default gateway of the host correctly.
Added the Layer 3 switches, performed the Data Collection, Device Discovery and UT Acqusition and now the endhost reports are generated based on IP address.
following is the link for reference:
http://www.cisco.com/en/US/products/sw/cscowork/ps563/products_tech_note09186a0080094949.shtml#ts2b

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

Bizarre & Random Dashboards Display Issues/Errors

Hello,
I am on BI 4.1 SP04 and these dashboards were developed using an equivalent level on the client tool. (4.1 SP04)
Sometimes we get very strange and often random display issues with our dashboards. I have attached screen shots for examples. Sometime we are missing data points from rendering on the charts, other times a line chart will extend into a bar chart. Has anyone experienced this or have any idea what could cause this? It is very frustrating...
Thanks for looking,
Gary
Missing data points on yellow line, yet line rendering with proper data (other wise would have 0's in places, etc)
Green line missing dot on last end point
In this example there are no dots on the yellow line or green line
In this example the blue line has turned into massive columns extending across the charts

This patch should resolve the issue in the last screenshot. I still face the other issues after upgrading to SP3 Patch 4. The dots in line chart take some time to appear. Also, if we use dynamic visibility, the components taking considerable time to appear sometimes. I hope this will also be fixed in later patches. Please share your experience too after applying the patch.

Problem configuring front end host for weblogic cluster

hi,
I am using weblogic 8 sp4,I have a cluster of WLI servers for which i am trying to configure a front end host.I am using apache Http server 2.0.55 for the same.
I copied the mod_wl_20.so file to the modules directory and added the following to httpd.conf file
LoadModule weblogic_module modules/mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogic http://myIP:9191,http://myIP:9192,http://myIP:9193
ErrorPage http://myerrorpage1.mydomain.com/
MatchExpression *.jsp
MatchExpression *.xyz
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
however,the error page gets displayed and not the default weblogic page.
When I change the Error page url to that of my cluster url(i.e)http://myIP:9191, the weblogic default page gets displayed .. I mean to say that the same url doesnot work with the WeblogicCluster parameter but works with
the ErrorPage parameter.
Somebody who has configured the front end host using apache http server please clarify, it would be of great help.
Thanks in advance

The error.log displays the following (sorry i forgot to add it above :-()
[Thu Nov 24 15:46:40 2005] [notice] Apache/2.0.55 (Unix) configured -- resuming normal operations
[Thu Nov 24 15:46:56 2005] [error] Port number specified in WebLogicCluster parameter specified in httpd.conf is not an integer less than 65535
[Thu Nov 24 15:46:56 2005] [error] CONFIG_ERROR [line 1344 of ap_proxy.cpp]: Port number specified in WebLogicCluster parameter specified in httpd.conf is not an integer less than 65535

LMS 4.0.1 End Host display issue

Similar Messages

Maybe you are looking for