LMS 4.0.1 tries to connect to itself through proxy

Hello,
I am experiencing a weird issue with LMS 4.0.1 running on Windows 2008 R2 Standard Edition.
LMS 4.0.1 can connect to the Internet through a web proxy. This proxy does not require authentication. I need to configure proxy in LMS in order to quickly update LMS (by doing Device Updates for CiscoView and Inventory Config)
As soon as I configure proxy settings for CCO connection (i.e, under Admin -> Cisco.com settings -> Proxy Server Setup), LMS stops working properly. In particlar, ANI database breaks down (this is actually still running, but connection to ANI is impossible).
After doing packets capture, I noticed that LMS server (which is called SRVLMS01) tries to connect to itself *through the proxy* when configured. Of course, this does not work (the proxy refuses such connection) - see below (especially packet #8):
4 0.002564 <LMS IP address> <Proxy IP address> HTTP POST http://SRVLMS01:1741/CSCOnm/servlet/com.cisco.nm.cmf.servlet.LwmsMainServlet?fromCLI=true HTTP/1.1
5 0.002585 <LMS IP address> <Proxy IP address> HTTP Continuation or non-HTTP traffic
6 0.003617 <Proxy IP address> <LMS IP address> TCP http-alt > 34514 [ACK] Seq=1 Ack=763 Win=64938 Len=0
7 0.007023 <Proxy IP address> <LMS IP address> TCP [TCP segment of a reassembled PDU]
8 0.007025 <Proxy IP address> <LMS IP address> HTTP HTTP/1.1 403 Forbidden (text/html)
Everything recovers when removing proxy settings and restarting LMS processes (that is, ANI server comes back online).
FYI, Internet Explorer on LMS server is configured so that proxy settings are bypassed when connecting to http://srvlms01 or to http://<LMS server IP address>. Using IE on the server itself to connect to LMS works just fine.
Of course, I could remove LMS proxy settings and download all CiscoView packages manually, but that would be really painful.
Kind regards
Pierre-Loic

Bonjour Pierre-Loic,
Can you try on the server to use the resolver.pl in /opt/CSCOpx/bin to resolve the hostname of the server and it's IP address.
Do they resolve to what you think they should?
Meanwhile, download the device package updates can be done quite quickly, installing them can take longer I noticed.
Cheers,
Michel

Similar Messages

Keep gettig this error message when trying to connect to Firefox The proxy server is refusing connections.

Redownloaded Firefox and continue to get this error message when trying to connect: The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Go to Options > Advanced > Network > Connection > Settings and choose "No proxy".
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
It is important that you keep IE updated. The information included with your question, indicates that you are using IE7; you should update to IE8 for your own protection. IE9 will not be made available for Windows XP.
*http://windows.microsoft.com/en-US/internet-explorer/products/ie/home

Trying to connect apple tv through a wireless public hotel connection.

Hi
Im trying to connect Apple TV to a DataProjector in a conference room, connect it to the net via a wireless public hotel network. Then take photos at predinner drinks so they appear in the conference room via photo stream with the ATV screen saver.
ATV is telling me its connected to the hotel public network with a strong signal strenght. But I cant login to my Icloud account saying its unavailable and try later. Same thing with itunes account. From this I'm assuming its connected but Im being blocked by the hotel as I need to enter a password. So where do I enter the password?
Can anyone help here?

Scratch that, It wasnt connected through the hotel network because I tested connecting through personal hotspot on the iphone and everything came alive.

Applet using socket connection always go through proxy server

Socket connection with socks always go through proxy server
We have two applets in different codebases using socket to talk to each other, until now nothing new, but the problem is that we are behind a proxy server with socks and because of that, the connection always go through the proxy server even with proxy override point to the applet machine. We have tried a lof of things and until now nothing worked, it looks like the socket is ignoring proxy override configuration. We would like to know if there is a way to solve this problem making the applets comunicate to each other ignoring the proxy server. It should happen when we set the plug-in option to "no proxy host", but it doesn't. Maybe it can be a bug of JVM, I don't know, just maybe, and if it's true, any other good idea would be welcome as well.
Thanks in advance.

Hi,
I am not very much sure if I can help you. In my previous experience, once you set the system property to use the proxy, then the jvm uses the proxy. If you want disable, in your code, you have to disable it.
like System.setProperty("socksProxyHost","someHost"), Properties props = System.getProperties(); props.remove(("socksProxyHost");

Can not connect to ftp through Proxy

So I am at work on my Mac and I've recently been set up on our proxy server. I have been able to connect to the internet though my browsers and mail (though it is noticeably slower). My problem as of now is that I cannot connect to an ftp server at all. I put the proper ip settings in the network settings... or at least my IT person says I did. When he tried to connect to the same FTP site on his PC, it worked without a problem, so my Mac won't even get to the proxy. What am I doing wrong? Any suggestions are appreciated.
Thanks,
Steve

In your Network System Preferences, under Advanced, Proxies tab, is Passive mode selected? If it is, try toggling it off then on (or try it with it off).
Also, have you contacted the Cyberduck people to ask if they know about a problem?
Have you tried connecting from Terminal?

Trying to connect 2nd printer through Ethernet Port of AEX b/g

Hello all, Hello (maybe) Duane,
I do have a 2nd Airport Express b/g on our home network, and have a normal laser printer running as a wireless bonjour printer through that 2nd AEX, which is set up as a remote base station. I do have the Ethernet port free on that AEX, and want to connect a Brother 4040cn network ready color laser printer through the Ethernet port of this base station and use it as a bonjour printer? wirelessly... The AEX is set up as a remote base station to the main base station using WDS... I read a lot that the ethernet port only works when this station is in WDS mode - it is, but I still can't get it to work...
I talked to a guy at the Apple Store and he told me it should work, and that I somehow have to configure the Ethernet port of the AEX as a bridge so that could work.... ? It is not a supported solution (as expected...) so I tried to find that, but I am not able to work it out.
I can see the printer using the brother software, it shows me the status of the printer correctly, but I cannot get any printouts. The printing windows shows the printer, even lets me pick it as a bonjour printer, sends it off to the printer, but nothing arrives at the printer... I can use the web based printer management utility, which directly connects to the using the IP address, and can send stuff that is printed out, but i cannot get it working.
Hope that makes sense - anyone out there able to help?
Ningaloo

Hello,
If you wanted to setup a wireless network, you could look at some Wireless Ethernet USB adapters (will work just like the AirPort):
http://www.afterthemac.com/
Understand that the "AirPort" is just Apple's fancy name for Standard WiFi Networking. It's not anything special. Just Apple's implementation.
So, any WiFi Ethernet Adapter is going to be compatible with Apple's Airport network.
If you want to use the standard USB to Ethernet adapters, then you could look to see if you can find a suitable driver that will either enable your adapter (the one you just purchased) to work, or perhaps find an adapter that has a 3rd-party driver and then purchase that one. The following website lists Mac OS drivers that will enable "Windows-Only" adapters to work:
http://www.sustworks.com/site/newsusbethernet.html
The problem there, is that most USB to Ethernet (not wireless) adapters come only with Windows drivers. So, this website provides information and support to make those devices with with Mac OS X.
Otherwise, I have not found a pre-packaged USB to Wired Ethernet device that comes with Mac drivers.
But, the first website lists lots of USB to Wireless Ethernet adapters that come with Mac Drivers.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

TS2634 I am trying to connect my camera through a USB and it says it does not support this device

I just bought the USB connector for mynipadbandntried to connect my camera but it comes up does not support this device. What do I need to do in order to connect my camera ?

What model camera?
Cheers, Tom

When trying to connect to facebook through Zynga Farmville 2 I get an error saying this app is blocked go to settings page & unblock . Where do I find the setti

When trying to access Farmville2 thru Zynga it asks if I want a new game or retrieve my history from Facebook. I click facebook & get a message saying the app is blocked go to settings page & unblock. Where is the settings page?

It May be Facebook Block
*https://www.facebook.com/help/121070141307903/

Spaces application is unable to connect to internet through proxy

hi ,we have developed a portlet which reads weather from XML file from the following URL :
http://free.worldweatheronline.com/feed/weather.ashx?q=Riyadh,SaudiArabia&format=xml&num_of_days=2&key=d35160acaf083722112707.
this works fine at our offices because we don't have a proxy server ,but when we implement this on client environment,the application fail to connect .
I've added proxy server IP and Port to the general proxy configuration on the server ,but it still no working .
i have webcenter 11.1.5 installed on oracle Enterprise Linux 5.5 64-bit .
i used this java option (JAVA_OPTIONS=${JAVA_OPTIONS} -Dhttp.proxyHost=172.16.1.20 -Dhttp.proxyPort=8080) i but this in setDomainenv but i have the same error ,is it possible that i put this option on a wrong place on the file ?
my application is deployed on admin server and on portlet server .
log files say nothing about this ,i don't know why !
can anyone help please ? tell me if you need anything from me to post .
regards

Please refer to below URL for proxy settings.
http://docs.oracle.com/cd/E25054_01/webcenter.1111/e12405/wcadm_rss.htm
Thanks & Regards,
Murali.
===========

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

Computer won't connect to printer through network. How do I set up the fax as well?

I'm new here and just beyond frustrated with trying to get this to work for my office.
My other printer wont work through USB since my computer will give me a warning throughout the day that the USB is corrupted. So anyways, I got a new printer and I'm trying to connect to it through the office network. My iPhone prints through it. My computers operating system is Windows 7 64 Bit.
My printer is HP Officejet Pro 8600 all in one
I want to connect to it from the network and I want to set up the fax. When I plug the line into the printer then the ext phone line into my phone my phone doesn't work.
I'm confused! Someone help! Please!!!!!
This question was solved.
View Solution.

Hi ahagereo,
Follow the steps in the document below to connect printer to your network.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02886889
Fax: Make sure you have the phone line plugged into the line 1 port on the back of the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

In my small office ethernet network all of a sudden one of my imacs cannot be connected to. It can connect to all other computers and can access internet, but as soon as someone tries to connect to that mac, it disconnects from the network. Any ideas

I have a network of 9 macs that connect via ethernet and a router. All of a sudden one of the macs cannot be connected to. It can connect to all others and the internet, but no one can connect to that one. I have appletalk active and file sharing on, but everytime someone tries to connect to it, it is not on the network. Additionally, the personal file sharing keeps turning off even though I have it locked. Any ideas?

Hi orangekay
not sure where you got the idea that I have
bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
because I do not have any such running, just normal Applescripts that do tasks that could be done by hand.

HT4436 When trying to sign in I keep getting the error message, "iCloud encounterd a error while trying to connect to the server". How can I get signed in?

When trying to sign in to iCloud, I always get the message, iCloud has encountered a error while trying to connect to the server. How do I get in????

Hello,
Try following step and check if issue gets resolved or not.
Find Acrobat.exe on your computer. Right click the program and click 'Troubleshoot Compatibility'. Set the compatibility to Windows XP service pack 3.
Regards,
Anoop

Trying to connect to serve message for over 10 minutes trying to install creative cloud

The Adobe installer window says "trying to connect to server"...... I cannot get Creative Cloud to install

I was on a chat session for over an hour yesterday. She had me going through all types of settings on my computer. It was ridiculous. I was about to try one more time today with Internet Explorer (I use Chrome normally) If that doesn’t work I just may call to cancel the subscription.
Let me know if you were successful and I’ll do likewise.

LMS 4.0.1 tries to connect to itself through proxy

Similar Messages

Maybe you are looking for