Lms 4.0 and stacked 3750 v2

Hi
Lms 3.2 does not support stacked 3750 V2.
You cannot see it on topology map.
Will you be able to see it using LMS 4.
Otherwise when will it be visible
Steve

You do not need to download anything for the topology and inventory and configuration features of LMS, however, for CiscoView, go to Admin > System > Software Center > Device Update, check the box next to CiscoView and download and install all available packages. It's not a bad idea to do that for Common Services, Network Topology Layer 2 Services and User Tracking, Fault Management, and Inventory Config And Image Management, too just to stay up-to-date. However, with 3750s, the sysObjectID is typically the same for all models so unless you need chassis-specific management, features of LMS should just work with them.

Similar Messages

CNA and stacked 3750s

Hi,
Just starting a new Cisco core. Using CNA,it sees one 3750 just fine. When I stack that with an identical 3750 (the stacking seems to be successful when I telnet into the master switch), it shows up as an unsupported device in CNA. Anybody help me figure out what's going on? Thanks in advance.

According to cisco whitepaper before that if you add or replace a new 3750 switch to be a memeber of the stack, the master will automatically download it's image to the new member if they don't have the same IOS. In our case, we have to make sure that the new or replacement one has the same image as the master.

Stacking 3750 switches with EMI and SMI versions

Hi!,
Is it possible to have in a stack Catalyst 3750 with EMI version and Catalyst 3750 with SMI?. In my case, it is a WS-C3750G-12S-E with WS-C3750-48PS-S. I didn't find clear information about this issue. I know different major releases are not compatible but nothing is mentioned about the feature set.
Thanks,
MONICA

Hi,
It's possible but not recommended. If you decide to do this you should buy 2 EMI so that if the master fails the backup can still route traffic. (Having 2 EMI is TAC supported, even if the rest is SMI - not sure about just having one EMI and one SMI)
HTH - plz rate if useful.
Andrew.

Files saved from Elements 12 editor not automatically picked up and stacked in organizer

I have just upgraded to Elements 12 from version 6 and find that if I select a file in the organizer, select "Edit with Photoshop Elements editor", carry out the editing and save the file with the boxes for "include in elements organizer" and "Save in Version Set with original" checked the edited photo is not automatically included in the organizer nor stacked. On returning to the Organizer it tells me that a new photo has been found in the watched folders and I have to import it and stack it manually. What can I do to corret this problem?
Bob

Already several messages to confirm this is a bug.
See:
http://forums.adobe.com/message/5790289#5790289
You can add your vote in the feedback forum.
http://feedback.photoshop.com/photoshop_family/topics/save_in_version_set_not_working_in_p se12
The workaround would be to kill the 'ElementsAutoanalyzer.exe' process, as described here:
http://barbarabrundage.com/2013/10/31/the-elements-12-auto-analyzer-adobes-evil-undead/

LMS 3.1 and CiscoView 6.1.8 not swhowing 10Gb modules

Hi!.
We´ve got a CiscoWorks (LMS 3.1) with CV 6.1.8 and it doesn´t display the new installed 10Gb (X2-10Gb-SR=) modules in the Catlyst 6509E chassis and Catalyst 3750E, what can I do to fix it?
Thanks.

Hi ,
Upgarde the LMS to LMS 3.2 and then check the issue..
Download link for LMS 3.2:
https://cisco.mediuscorp.com/market/networkers/productView.se.work?/nxt/rcrs/proieidentity/=17651
Note : you do not need a new liense for LMS 3.2 , your existing license will just work fine
Thanks
Afroj

LMS 3.2 and MS SCOM and SCCM

Is there any recommendation regarding installation of CW LMS 3.2 and MS SCOM and SCCM on the same server?

This was not tested internally, so I cannot say whether or not there are any conflicts or problems. If possible, consider virtualizing LMS on one VM with the MS managers on another VM. Provided resources on the hardware are sufficient, this would be the safest course if all suites need to be on the same physical server.

Lms 3.2 and window server 2008 r2 standard

we have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used togetther
Could we upgrade to lms 4.0.1 ? If so, how can we do ?
thank you.
Duyen.

Correct, LMS 3.2 is not supported on Windows 2008 R2. You can upgrade to LMS 4.0 (which is supported on R2), but that is not a free upgrade from LMS 3.x. You can, however, download a free 90-day eval of LMS 4.0 from http://www.cisco.com/go/nmsevals .
It sounds like you need to contact your reseller or account manager to see what they can do. If you just purchased LMS 3.2, you may be able to get a free or discounted upgrade to 4.0.

Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

LMS 3.2 and window server 2008 standard, get error when we try
Khi truy nhập vào menu chức năng:
License Server/Daemon Manager is down. Please check license.log for more information.
access licensing:
Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
Lincense.txt is file log of LMS
Must I have to active window server 2008 first ?
thank you very much ?

Hi ,
--Add the Casuser to the Administrator Group
and then reset the casuser password:
1. Go to CSCOpx\setup\support> and run the following command:
resetCasuser.exe
2. Restart the daemon manager:
Net stop crmdmgtd
Net start crmdmgtd
Let me know how it works
If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
--also screen shot of the below directory :
NMSROOT\etc\license
Thanks
Afroj

LMS 3.2 and QPM 4.1.2

Hi Forum,
my customer play to deploy LMS 3.2 and last QPM 4.1.2 on the same server.
In the documentation of QPM only Common Services 3.2 are mentioned. Does this match with LMS 3.2 - since LMS utilizes CS 3.3?
Does anybody know something about that?
Thanks a lot in advance.
Frank

No, you cannot install these two on the same server. Doing so will break both products. You must dedicate a server to each since they require different versions of Common Services.

Need to perform both Queue and stack operations in Visual C# code

Need to perform both Queue and stack operations, is any Data Structure available for this. or how can i custom create the structure for this?

Hi,
In this structure contains base logics of Queue and Stack. Well stack plays major role here with operations of PUSH, POP with additional operation of Queue i.e., ENQUEUE and DEQUEUE. Here the stack has enqueue and dequeue
https://code.msdn.microsoft.com/The-Stacked-Queues-An-11f3703a
Regards,
Selva Ganapathy K

Ratings and Stacks

I have read many of the past messages on stacks and the inability to apply changes/ratings to all images within a stack at the same time. Let me explain what I'm doing and why this is frustrating.
In many of my shoots I'm bracketing every shot. I take the images into LR and stack my brackets. I may end up with 100 or more stacks, each with (3) images. I now want to do a quick rating and go through the stacks giving a 1-star to those I want to process further. I do a 1-star filter and now want to go into the stacks to pick the best of the three. Can't do it because LR won't apply the rating to all the images in the stack so the filter leaves behind the hidden stacked images. What a pain. Please give me the option to apply the rating to all the images in a stack something like holding the option key when applying the rating.

There seems to be a glitch with Stacks and Smart
Albums. If I base a smart album on a set of
parameters and the photo is not the select of a stack
it does not get selected for the smart album. For
example if I make a select based on a client then
choose later to make a 5 star rating out of the stack
that is not the select it will not appear in the 5
star library smart folder until I break the stack.
So I have to go back to the original stack and break
it to allow the search to work. Does anyone know
how to fix this?
In the parameters for the smart album you need to check "Ignore Stack Groupings".
Be aware of an interesting issue you may run into later around this. If you drag a set of images out of a smart album that ignores groupings into a "normal" album that holds images, you will only see images that are also stack picks show up in the destination album. I have lobbied via feedback for Aperture to always make an image drug into an album from a smart album the "Album Pick" for that album to eliminate that exact problem.
Another odd behavior of smart albums you may find useful is that whatever level you define a smart album at is the level it always searches, no matter where you move it after. So you can make a top-level smart album doing a search across many folders and projects, and keep it neatly stored under a different top level folder where if you had tried to put the smart album to start with it would not see images.

LMS 2.1 and nGenius Real-Time Monitor 1.4

Dear NetPros,
Is the LMS 2.1 and the nGenius Real-Time Monitor 1.4 can be installed on the same system?
Regards,
Steve

Yes, but not recommended. Keeping them on separate servers will be more beneficial.

LMS 4.0 and Prime Infrastructure..!

Hi,
I am using LMS 4.0 and as the licenses got expired I came to know that I need to buy Prime Infrastructure license as LMS 4.0 reached End of life.
So now if I buy the prime infrastructure licenses, will it work on LMS 4.0 or I need to upgrade? and how can I get the upgrade?
Thanks..!

You would need to upgrade. Prime Infrastructure 1.2 has LMS and WAN buildt in.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Confused on albums and stacks

Before I upgraded to Snow Leopard and Aperture 2.1.4 I had built three albums with 45 pictures each, and put them in a folder. I used these albums to sync to my iPhone, and looking at my iPhone all 135 pictures are in the right place.
After upgrading SL and Aperture few days ago, I went through my pictures for the last year and created a few dozen stacks.
Today I noticed in the Project Bar that the albums now have 232, 1247 and 1088 pictures.
After a little investigation, it seems, that in any album that had a picture that is now in a stack, the album now includes the whole stack inside the album! I'm able to reproduce the 'feature' by just selecting a picture and 'stacking' it with any other random picture. Unfortunately, if I unstack (i.e. not close) the stack, all the surplus pictures are not removed from the albums.
The stacks of pictures I am referring to are not versions of a master, they are groups of pictures from a single photo event.
Suggestions on eliminating this behavior?

Well, admitting my confusion, here are more details:
I have about 14,000 pictures, 75GB, in Aperture, half are RAW, the rest jpeg. Due to the size of the library all files are referenced.
When I load pictures from the camera into Aperture, they go into a project based on the year (i.e. 2007, 2008, 2009). Years are averaging about 1,500 - 2,500 photos. Inside each Project (year) are a group of Smart Albums based on month, subject or location. All referenced masters for 2008-2009 are on my MBP, all previous Projects (years) have been relocated to an external drive using Aperture's move feature. The stack problem only involves referenced masters on the MBP.
In the Project Pane, underneath the Library I have two folders:
- One folder contains smart albums based on keywords or metadata that crosses Projects (i.e. multiple years)
- The second folder 'Collections' is made up of static albums (and light tables) that I use to sync or export to iPhone, Flickr, websites, etc. These photos also come from various projects.
Recently I got tired of scrolling through hundreds and hundreds of pictures in a project, so if I ran into 30 pictures from a dog show, or party, or vacation, I just selected them and turned them into a stack. I created 20-30 stacks for 2009, another 15-20 for 2008, reducing the browser scrolling time dramatically.
In the simple case, I thought this is what stacks are for.
To my 'confusion' each time I included a picture in a stack (within a single project) the whole stack was added to the static album in my 'Collections' folder [remember Collections is not inside the same project.]
Last month it did not work this way, the evidence is my iPhone that syncs to a static album in 'Collections'. The iPhone shows a photo album of 20 photos that has now grown to 232 on Aperture due to the stacking of images that were included in an album. Four other iPhone sync albums have expanded also. Manually I have not added any images to the albums that expanded.
None of the referenced pictures have been moved, renamed or relocated. After recognizing the problem, I did rebuild the Aperture database, it is about 18GB without the images in it.
While cleaning-up, I did relocate some static albums from the top layer of the Project pane into the Collections folder, but even static albums that were already inside the folder (e.g. 'iPhoneSync2009' have seen increases in the number of images.
I had upgraded to Aperture 2.1.4 and Snow Leopard and synced to iPhone without problem, before I started stacking things.
So, admitting my confusion here:
- Why isn't this what stacks are for? (STACK and UNSTACK should create and delete, expandable and collapsible sets, inside a project or not)
- Apparently no one else see this behavior?
I'm totally open to suggestions of better organization or use of folders and stacks, I've tried to read every Aperture forum and blog I can find.
Thanks for advice,
Flack

Overlay creator, movies and stacks

I'm building a page that contains a menu and stacked items, as you cant stack stack these stacks i'v made in to a multy page article with buttons to go to the other pages, giving the look of one page with buttons. now i want to ad a movie to these pages, but for some reason i cant ad the same movie to 6 pages that are in one article, why not, if i put it on anny page it works fine but when i try to do the same setup on page 2 it wont run on page one or page 2, it does work if i use a diffrent movie, so i could coppu the movie 6X but thats not a clean work around.
Also i made a image stack with grouped items and i try to get that movie in the upper corner in the range of the stack but that wont work, the movie will never play as the stack takes priority over the movie button, is there a way around this?

This sounds like a DPS question. Please post in the DPS forum.
http://forums.adobe.com/community/dps
Bob

Lms 4.0 and stacked 3750 v2

Similar Messages

Maybe you are looking for