LMS 4.0 eval on 180-day Windows 2008 Server Standard R2 SP1 eval

I'm having difficulties installing the LMS 4.0 eval on an 64-bit 180-day Windows 2008 Server Standard R2 SP1 eval.
The installer says that it needs 2008 Server Enterprise, but the LMS 4 release notes say 2008 Server Standard works. It also says that R1 is supported, but makes no specific reference to R2. I'm assuming that if R1 is supported, R2 would be supported as well, no?

You need to install a patch for this OS support:
http://www.cisco.com/cisco/software/cart.html?imageGuId=DB56D2FEE377F4846A9F42F81C48EAC18C2C9967&i=rs
CiscoWorks_LMS_4.0.x_WIN2K8_R2.exe
Make sure you follow the install instructions in the readme

Similar Messages

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Installing Dirsync on Windows 2008 Server Standard FE

Hello all,
I need to Dirsync my only domain controller i have to Office 365. My server is a Windows 2008 Server Standard FE. I installed all requirement for dirsync to be installed (and all Windows updates also) and i still get an error when trying to install
(Says my Powershell is not at least 2.0, but it is...)
Anyone tried to install Dirsync on that kind of server ? (and made it work?)
Regards,

It is
required to update to Windows Management Framework 3.0 or Powershell 3.0 if you are installing DirSync on Windows 2008 R2. I believe the same applies to 2008 SP1 as well.
Also, I've heard of issues where non-English versions don't properly detect the presence of PowerShell. You may want to temporarily change your regional format to English to test this, if this applies to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Windows 2008 Server Standard - Problems Printing

I have an issue with a server that we are currently setting up in a bus station.
There are 6 machines in total, one is the server which is running Windows Server 2008 Standard 32bit SP2, the other 5 are the client machines which are all running Windows 7 Pro 64bit SP1.
All 6 machines are all linked together on the same domain and they all speak to each other, i.e all ping each other.
The issue we now have is that we have 5 printers to link to the network, all the prints are plugged directly into the Ethernet sockets on the wall which then go to the switch. The prints all have ips assigned to them and the server will see them but will
not communicate with them. If we try to ping any of the printers it fails.
We have loaded print service/print management on the server and we can set up the printers through that. Again we get the error that it is not communicating with the printer so it asks you to load the driver manually(gives us a huge lists of makes and models).
In the network list through control panel we dont get a list of printers.
If anyone can help that would be great and could let us know what we are doing wrong.
If i have missed anything important out please let me know.
thanks

Until you determine the underlying network transport problem this has nothing to do with printing.
Get the network configured so you can ping or use tracert to the IP of the device. It's possible the printers are not properly configured for your network but once again not a printing issue at this point but a networking issue.
Alan Morris Windows Printing Team

Windows 2008 Server on Sunfire V20z Server

I am looking to install Windows 2008 Server (Standard Edition) on a retired Sunfire V20z server. The box is totally raw - i.e. new drives with no OS. The problem is that the Win2008 install disc is a DVD and the V20z only has a CD-ROM drive. I purchased an external DVD USB drive, but the BIOS does not support booting from the USB. I'm thinking updating the BIOS to version 1.35.3.2, but I can't find any documentation that it even supports USB booting.
Anyone have any ideas on how I can install Win2008 server on this raw box?

Depending on what other resources you have to hand I'd use one of the following approaches. Note: I don't have a V20z but the following approach has worked on other machines which had no DVD drive.
Open the box and temporarily connect a slimline IDE DVD-ROM in lieu of the built in CDROM. I've found that while there is often a proprietary interface on the M/B the connection at the drive end can normally be dismantled and connected to another drive. I use one salvaged from an IBM P3 based Netvista.
or
Download the Microsoft WAIK and generate a Windows PE CDROM. Insert that into the CD drive and place the Windows 2008 DVD in the USB DVD drive. Boot the machine from the CD and then launch the Windows setup program from the USB DVD. The process for creating the Windows PE CDROM is straightforward and is covered in the Windows PE User's Guide as provided in the WAIK but here are the steps.
Launch the Deployment Tools Command Prompt and run the following commands ( for amd64 )
copype amd64 C:\winpe_amd64
copy c:\winpe_amd64\winpe.wim c:\winpe_amd64\ISO\sources\boot.wim
oscdimg -n -bC:\winpe_amd64\etfsboot.com C:\winpe_amd64\ISO C:\winpe_amd64\winpe_amd64.iso
Burn the resulting ISO to a CD.

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

CiscoWorks LMS 4.0.1 is supported on Windows 2008 EE R2 SP1?

Installing CiscoWorks LMS 4.0.1.
I need to know if Windows 2008 server EE R2 with SP1 is now supported.
Many thanks for help.
Andrea

Hello,
Service Pack 1 of Windows 2008 Server Enterprise Edition R2 is not officially supported yet. Reference the readme.
However, I have applied SP1 to my installation of LMS on Windows Server 2008 EE R2 without breaking it. Your mileage may vary.
Hope this helps.

Windows 2008 Server R2 not loading Desktop

Hi All,
I have windows 2008 server R2 using as Database server.Today when i try to login it is showing two more user accounts in the login screen and i login to the server with administrator account but it was showing a blue screen(not blue screen error) with mouse
pointer.I press Ctrl+Alt+Del and open task manager>new task>desktop and click open its showing that "windows cannot access the specified device,path or file.You may not have the appropriate permissions to acess the item.

From cmd.exe session run SET then look for
USERNAME=Administrator
USERPROFILE=C:\Users\administrator
If you see USERPROFILE=C:\Users\administrator.000 (or similar) then the original local administrator profile was corrupt or otherwise orphaned.
In days past one could create a new account with local administrative rights, logon with new account, then after saving off docs, etc. from corrupt/abandoned profiles use
Control Panel|Users and Passwords and delete the old profile stores. Then when you next logon a new profile is created from an image in
\default user Have not tried this on anything newer vintage than server 2003 though.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows 2008 Server R2 & SAP Business One

Does anyone have any experience, good or bad, with SAP Business One and Terminal Service on Windows 2008 Server R2? We are finding a number of issues with this configuration and we are looking for any feedback that is out there.
Here is the situation - our customer is running SAP Business One v2007 SP01 PL09 Hotfix4 on a Windows 2008 Server R2 machine. All users (15 max) access SBO via Terminal Service to this machine, which also holds the databases (SQL Server 2005). The machine currently has 20GB of RAM.
What we are finding is:
1) When any process related to SBO (SBO core or add-ons) consumes some portion of memory, none of that memory is ever released back to the O/S until SBO is completely closed. So over the course of a day each user ends up simply consuming more and more memory as forms are opened for transactions. While we do see this in Windows 2003 Server to some extent, at least some memory is released when a given form is closed.
2) Once the system hits a point where around 75% of RAM is consumed the users start seeing application "hangs" and are forced to manually terminate SBO (via Task Manager) and restart. There doesn't seem to be any paging or use of virtual memory (if my terms are right) in use.
3) If the system is busy and a new window/form is opened the new window immediately (within one or two seconds) presents the "Not Responding" message on the new window. Depending on the circumstances the application is simply waiting for resources and will continue opening normally.
I would appreciate feedback from anyone who has experience with Windows 2008 Server R2; and especially using it for Terminal Services. My personal feeling is that it is a platform that should be avoided but we would certainly like to hear what other folks have to say.
Regards,
Ross Unger
Third Wave Business Systems

I believe the supporting of this OS is still on Planned basis. You may check with SAP support to give them a good user case to fight with any non-compatible issues.
Thanks,
Gordon

HUM 1.2 and Windows 2008 - Server

Hello,
it is possible to run HUM with Windows 2008-Server? Problem is: It runns always CWLMS 3.2 and the customer wantes to add HUM. The hardware is not the problem.

There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release
3.2 (Common Services V3.3). Please have a look at the following links:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601
Regards
Farrukh

Connect to DB2 from oracle 11g on windows 2008 server

Hi Folks,
I want to conenct to DB2 from oracle 11g using DB link.
DB2 :
user : db2user
pwd : db2pwd
database : db2database (OSBLDEV)
able to connect to db2 server (installed on machine M1) using db2 client with above details from machine M2 (where oracle is installed).
Oracle :
user : orauser
pwd : orapwd
host : orahost
port : 1521
service : oraservice
able to connect to oracle server using oracle sql developer with above details on Machine M2 (windows 2008 server)
when i execute the query with database link
select row_id from siebel.s_org_ext@OSBLDEV;
I get the message : ORA-12154: TNS:could not resolve the connect identifier specified.
could you pls check and let me know whether the below enteries are correct or not.
Pls share if you have step by step connectivity from DB2 to oracle using DB link.
1. I have created the Data source for DB2 - test successful
create database link OSBLDEV
connect to "db2user"
identified by "ldb2pwd"
using 'OSBLDEV';
1. I have made the following entry in E:\oracle\product\11.1.0\db_1\hs\admin\initosbldev.ora
HS_FDS_CONNECT_INFO = OSBLDEV
HS_FDS_TRACE_LEVEL = 0
2. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\tnsnames.ora
OSBLDEV =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(CONNECT_DATA=(SID=OSBLDEV))
(HS=OK)
3. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\listener.ora and releoaded the listner (lsnrctl reload)
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
     (SID_DESC = # this is the entry for HSODBC
     (SID_NAME = OSBLDEV)
     (ORACLE_HOME = e:\oracle\product\11.1.0\db_1)
     (PROGRAM = hsodbc)
Thanks in advance.

1. My listener.ora is placed at the below location:
E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN
2. I have modifed the listener and removed the entry - hsodbc
3. stop and start the listener.
still can't see the service entry in listener status.
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.1.0.7.0 - Production on 19-JUL-2010 02:27
:08
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.1.0.7.0 - Produ
ction
Start Date 19-JUL-2010 02:21:17
Uptime 0 days 0 hr. 5 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File e:\oracle\diag\tnslsnr\DALDEVDBCRM1\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=daldevdbcrm1.corp.nai.org)(PORT=1521
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "ARIBADEV" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBADEV_XPT" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBAXDB" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "aiad.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiadXDB.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 1 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiad_XPT.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aianew" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianewXDB" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianew_XPT" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\>

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Error connecting to the SAP SRV on Windows 2008 Server platform

Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani Dlamini

Hi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy.

Bank Statement management in SAP B1 on a VMWare Windows 2008 server

Hi everybody,
One of our customer is using a VMWare Windows 2008 server with SAP B1.
Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
Everything including bank statements transfer was working very fine on a "real" server before new implementation.
When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
"JAVA Virtual Machine Launcher : could not find the main class : program will exit."
JAVA is well installed on the VMWare server.
We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
Does anybody already have this problem with Integration Platfom on VMWare server ?
Is there a solution to our problem ?
Thanks for all your contributions.
Best regards.
Michel

Hi Michel,
First of all, your PL is too low. AFAIK, the first supported PL for 2007A SP00 is PL30. You may upgrade your PL first to see if that is a bug or not.
Thanks,
Gordon

Crystal Reports 2011 not working in windows 2008 server CITRIX

Hi All,
We are using Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
We are using .net applicationton to run the reports.
The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
OK button is not responding. Cancel button too.
Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
Please feel free to ask if required any more details about my problem.
Regards,
Venkat.K

Ido's idea is excellent, only addition I'd like to make is the following:
You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

LMS 4.0 eval on 180-day Windows 2008 Server Standard R2 SP1 eval

Similar Messages

Maybe you are looking for