LMS 4.0 Prequisites of baseline templates are ignored if used for direct deploy

Hi all,
I'm want to use baseline templates for conditionally configuring several hundert access-switches.
What I expect to work:
Write a baseline template with prerequisites and parameters and use
Configuration> Compliance> Compliance Templates> Direct Deploy
The baseline template works perfect for
Configuration> Compliance> Compliance Templates> Compliance Check
if I use regex instead of parameters
- compliant devices are detected
- commands are generated only for non compliant devices
But I don't want to enter several hundert parameters manually if
I want to deploy the job after compliance chek...
If I change the regex into a parameter then direct deploy will unconditionally
generate the commands, regardless whether the prerequisites are met or not.
Is this by design or a bug?
My task is simple:
If interface Vlan1 has an IP address matching a certain pattern I want to deploy the global command
ip default gateway [same-prefix-as-interface-vlan1].1
Like I mentioned above: the regexes are OK: compliance check works as expected
When the regexes are changed to a parameter the command ip default-gateway will
always be generated regardles wether the prequisite is met or not.
Any thoughts or insight?
Regards, MiKa

Solution was simple:
In one of the old release notes (Cisco Ressource Manager Essentials, around 2009) I found a note that prerequisites in templates are not supported with direct deploy. There are no notes for newer releases but the behaviour is exactly like described.
Another documentation error...
Rgds, MiKa

Similar Messages

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

What are the classes used for bropdownListBox in BSP and purpose and how

what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar Shukla

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

What are cookie domains used for?

there is a choice, can someone give me some suggestion?
What are cookie domains used for?
A/ to be easily recognizable by digital certificates that are also based on domains
B/ to instruct the browser that the cookie should be send only to the domain it came from
C/ to provide convenient way for the user to group cookies by their domains
D/ All of Above
E/ None of Above

Not only does that not appear to be a Java question,
but the OP didn't even take a guess at the answer and
explain why he thought that that answer was correct.thanks! i support with your viewpoint, solve a problem will be the most important mission, but not consured! i am cognizant of this is a mistake to ask other questions in java forum ,but this question didn't far away j2ee project, though this is a choice, but only get a answer is not my original intention! i hope i can call on anyone join in this discussion!
thanks...

Your Apple ID and phone number are now being used for iCloud on a new iPhone. Why did this pop up today?

Why did this pop up today?
Your Apple ID and phone number are now being used for iCloud on a new iPhone.

Turned on my Mac Pro a few minutes ago and I got the following "POP-UP" message.
" Your Apple ID and phone number are now being used for iCloud on a new iPhone. " ( my iPhone is not new. )
" If you recently signed into "xxxxx iPhone" you can ignore this notification."
On the bottom of this pop-up window is an "OK" button. Well it's NOT "OK" No option is offered if it is not "OK".
I have made no changes to my iPhone whatsoever. Just normal use today. In my iCloud settings everything is turned off except sharing Contacts.
I'd suggest you log on to iCloud.com with your Apple ID, and then go to Settings and look in the "My Devices" settings for anything you don't recognize.
I just did this. All of the devices are iPhones, iPads, and Macintoshes that I own and am familiar with.

What are the materials used for the earbuds/earphones??

What are the materials used for the earbuds/earphones?? Like whats the plastic used and what are the speaker materials and the volume button???

Hello Veronica176
The materials in Apple headphones include Neodymium magnets, oxygen-free electrolysis copper wire and a Nickel plated plug
Apple uses Neodymium magnets in their headphones as it is much more magnetic compared to that of a ferrite magnet. This also further enhances the accoustics of sound and preventing any loss of sound. Because of this, you can get the same sound out of Apple headphones as the good ol' circum-aural headphones (image attached).
Oxygen free copper wire is created through electrolysis which is furthermore considered an above average material for headphones, thus ensuring better sound quality. Oxygen free copper wire ensures a faster transfer time (as copper is one of the best conductors) and because of this, allows a faster transfer time, minimising loss. This means the sound quality of the music/sound playing may actually depend more on the quality of the MP3 file than the headphones.
The nickel plated plug used by Apple is a standard connection and joins to a female connection into the iPod (for example) which is also nickel plated. Where gold plated plugs are renowned to transfer more data and superior sound quality when connected to any device. Connecting the same metals during transfer (nickel plated plugs and nickel female connections) ensures optimum sound as the signal will not be jumping different kinds of metal. The lack of gold plating also helps to reduce the cost in manufacturing and to the customer.
If you have any more queries, please feel free to ask further questions, it is what we are here for

ACE 4710 what are these ports used for?

Hello, what are these ports used for please? What can I do with them?
Thank you
Sent from Cisco Technical Support iPhone App

Hi Bilal,
They are reserved for future use. Please have a look at the link below:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/4710/hardware/installation/guide/Overview.html#wp1043136
Regards,
Kanwal

What are the printers used for cheque prinitng ?

Hi all,
what are the printers used for cheque prinitng ?

Mostly SAp supports all printers( mostly used are HP ones) but all printers can be configured in SAP.
Regards,
SaiRam

The following message popped up on my MacBook Air: Your Apple ID and phone number are now being used for ICloud on a new IPhone. What does it mean? Should I worry?

The following message popped up on my MacBook Air: Your Apple ID and phone number are now being used for iCloud on a new iPhone. What does it mean?

Hi SLCfromMadison,
This is the message that you'll receive when your Apple ID is signed into on an iPhone. If you haven't done so, the article linked below details a number of steps that can help verify the security of your Apple ID should you think that an unauthorized person has access to it.
If you think your Apple ID has been compromised
http://support.apple.com/en-us/HT204145
Cheers,
Allen

I rec'd an alert that my "Apple ID and phone no. are now being used for iCloud on a new iPhone." I am not using iCloud and I don't have a new iPhone. Is this something to worry about?

I rec'd an alert that my "Apple ID and phone no. are now being used for iCloud on a new iPhone." I am not using iCloud and I don't have a new iPhone. Is this something to worry about?

Howdy Libbidydooda,
There are a couple of possibilities that may apply to the email you have received regarding your Apple ID. The first is that the email may be a legitimate warning that your Apple ID has been compromised. For this reason I would suggest that you change the password to your Apple ID as soon as possible. Use the instructions on this page -
Apple ID: Changing your password - Apple Support
In order to increase security for your Apple ID you may want to set up and use two-step verification. See this article for information about it -
Frequently asked questions about two-step verification for Apple ID - Apple Support
The second possibilty is that the email is an attempt at "phishing" in order to get you to reveal personal information. Typically this is done with an email that looks like it comes from an official source but has links to web pages that, while they may look like they are real, may actually be gathering your information for use by others. This article has more information about phishing -
Identifying fraudulent "phishing" email - Apple Support
For this reason it is important that you do not follow any links in the email, as they may compromise your security.
Thanks for using Apple Support Communities.
Best,
Brett L

What are the tables used for ACR & Master data daemon job?

Hi Experts,
What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
Kr,
Praveen

Hi Praveen,
Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
Thanks,
Bharath

What are the main uses for a Macbook Pro, and also for a Macbook Air?

I'm curious of whether I should buy a Macbook Pro, or Macbook Air. Before I make my decision I would like to know what are the main purpaces for each Macbook.

Here's an article that compares the two.
http://news.cnet.com/8301-13579_3-57458148-37/13-inch-macbook-air-vs-13-inch-mac book-pro-which-should-you-buy/?tag=postrtcol;posts

What Systems are the Pros Using for Premier, After Effects, and SpeedGrade?

I bought the full Creative Cloud in hopes of making a career for myself in audio/visual editing. The problem is, my system doesn't seem to be able to handle the software, particularly when changing back and forth between the three programs mentioned above. Beyond that, my first project failed to export properly. Moreover, all throughout its development the system lagged badly. And this is after having followed all the preferences recommendations available in the Adobe's tutorials and elsewhere on the Web.
Here's my system:
SYX-P67A-C43: Intel Core i7 2600 (an 8-core unit) at 3.4GHz, with 8 Gigs of RAM (soon to be 16) with a GTX 550 NVidia Card, 1Gig of RAM.
As you can see, this is far in excess of what Adobe claims to be the minimum system requirements. It's obviously NOT.
What systems are the Pros using (like the guys in the tutorials) for Premier, After Effects, and SpeedGrade? Give me the exact machines with all the specs so I can price one up.

...although a little " old" now.....the fundamentals of your machine are still OK to get started IF you : 1. INCREASE your system memory to the full 32 GB....should make a BIG difference in performance.....8 GB is NOT enough, it will HINDER performance. 2. OVERCLOCK your CPU !!!.....many owners of your CPU have been safely running at 4.5 Ghz or HIGHER...some at 4.8 Ghz !!! This OC will make a DRAMATIC improvement as CPU speed is a huge factor in performance. 3. Improve your video card to a new NVidia 970 with 4 GB of video memory. 4. Check and MAKE SURE the power supply in your machine is ADEQUATE to handle everything, esp. if you overclock the CPU....generally 850 to 1,000 watts of a quality make is good. 5. Use a fast storage system...that means a SATA III SSD as your "C" drive, ( boot drive), being a Crucial M550 series,( or, M600 series), OR, a Samsung 850 Pro series SSD, ( more expensive). Other SSDs are NOT recommended, only these two makes are recommended for technical reasons. On this "C" drive, you should have Operating system, Programs, and Windows page file ONLY !! Your "D" drive can be ANOTHER single SSD to be used as a "cache drive" for all the previews, media cache, and cache files that Premier Pro creates PLUS, it can ALSO serve as the "Global Performance cache" used in After Effects. All your media and project files can go on your "E" drive. HERE you would have LIMITED OPTIONS because your motherboard only has TWO SATA III ports, ( which would already be used b the "C" and "D" SSDs). You NOW have only 4 SATA II ports left ......you COULD RAID 0 four 1 TB HDDs off these ports and have a 4TB backup drive connected to one of your TWO USB 3 external ports.....any DVD or Blue-ray can ALSO go on an external port.
However, if you are into spending REAL MONEY !!!.....Go Haswell E and X99 all the way !!...THAT will give you great performance !!

What are X_ tables used for?

We are seeing an X_ table for each of our tables, i.e. for LAP030 we also see an X_LAP030, for ABH200 we also see an X_ABH200.
They don't have any rows in them. The "describe" exactly like the base tables do.
How are they created and what are they used for?
version info:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production

Yes, it is Workspace Manager. We see the usual tables and views that we expect from OWM, e.g. AUX, HIST, etc. We've been using OWM for about 10 years and have never seen these X_ tables. I usually read the OWM App. Dev. guide each time we migrate to a new version because we have a COTS app (Intergraph's GTM) that layers on top of OWM. So we have to be very aware of the new functionality. And I didn't see anything in there about the X_ tables.
We work in a very open environment for our development group and we are beginning to suspect that someone just went in and created them manually for some reason. They are only seen in one schema on the database.
Thanks again for your help.

What are type defs used for?

I am learning about type defs and wanted to ping the community to get a feel for what expanse of things they are useful for. Any and all comments are welcome.
Cheers!
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

I found this (from LV Help) enlightening as to the differences between typedefs and strict typedefs:
Type Definitions and Strict Type Definitions
Use type definitions and strict type definitions to link all the instances of a custom control or indicator to a saved custom control or indicator file. You can make changes to all instances of the custom control or indicator by editing only the saved custom control or indicator file, which is valuable if you use the same custom control or indicator in several VIs.
Type Definitions
Type definitions identify the correct data type for each instance of a custom control or indicator. When the data type of a type definition changes, all instances of the type definition automatically update. In other words, the data type of the instances of the type definition change in each VI where the type definition is used. However, because type definitions identify only the data type, only the values that are part of the data type update. For example, on numeric controls, the data range is not part of the data type. Therefore, type definitions for numeric controls do not define the data range for the instances of the type definitions. Also, because the item names in ring controls do not define the data type, changes to ring control item names in a type definition do not change the item names in instances of the type definition. However, if you change the item names in the type definition for an enumerated type control, the instances update because the item names are part of the data type. An instance of a type definition can have its own unique label, description, default value, size, color, or style of control or indicator, such as a knob instead of a slide.
If you change the data type in a type definition, LabVIEW converts the old default value in instances of the type definition to the new data type, if possible. LabVIEW cannot preserve the instance default value if the data type changes to an incompatible type, such as replacing a numeric control or indicator with a string control or indicator. When the data type of a type definition changes to a data type incompatible with the previous type definition, LabVIEW sets the default value of instances to the default value for the new data type. For example, if you change a type definition from a numeric to a string type, LabVIEW replaces any default values associated with the old numeric data type with empty strings.
Strict Type Definitions
A strict type definition forces everything about an instance to be identical to the strict type definition, except the label, description, and default value. As with type definitions, the data type of a strict type definition remains the same everywhere you use the strict type definition. Strict type definitions also define other values, such as range checking on numeric controls and the item names in ring controls. The only VI Server properties available for strict type definitions are those that affect the appearance of the control or indicator, such as Visible, Disabled, Key Focus, Blinking, Position, and Bounds.
You cannot prevent an instance of a strict type definition from automatically updating unless you remove the link between the instance and the strict type definition.
LabVIEW 8.0.1; WinDoze XP
aut viam inveniam aut faciam

LMS 4.0 Prequisites of baseline templates are ignored if used for direct deploy

Similar Messages

Maybe you are looking for