LMS 4.0 Software Distribution

Hi all,
I have some difficulties on software distribution on LMS 4.0
Attached are the logs.
Pls aid.
Thanks

1. Post screenshot of error.
2. Post show ver of both devices.
3. Enable debugs Admin > System > Debug Settings > Config and Image Management Debugging Settings.
4. Create the SWIM job again and notate the job ID.
5. Post the SWIM logs NMSROOT/log/swim_debug.log.
6. Post the SWIM job ID logs from NMSROOT\files\rme\jobs\swim\job-id\swim_debug.log where NMSROOT is the CiscoWorks installed directory.

Similar Messages

CISCO PRIME LMS 4.1 ---- Software distribution fails with SWIM1113

Device will be rebooted.
SWIM1113: Device Reboot operation failed or Reboot Verification failed.
The device is not running the new image after it is rebooted.
Verify the configuration used to load the new image. Verify whether the new image exists on the device in a valid Flash partition
the software distribution , i select image for upgrade for router 1841 and select reboot immediatly after downloading so my device take new image but can not reload with new image ...
please help me

check if you have this command configured on the device ::snmp-server system-shutdown
if not configured it and it should reload it
Thanks-
Afroz
****Ratings Encourages Contributors ***

LMS 3.2: Software Distribution - Generic Error

Hy.
I need to roll out an IOS on r.a. 250 devices. But when I try to distribute any software image via RME I always get the same error. I'm unable to start the job because in step one after selecting image and devices I get "failure" for all devices. When I click on "failure" a pop-up window opens telling me "generic error". Please have a look at the attached screenshot.
What does this mean and how can I fix this? This is really urgent!
All devices are completely managable (and managed) by the LMS.
Thank in advance!
Marc

Which IOS image are you trying to deploy and which device ?
Go to Common Services --> Software Center --> Software Update and provide screenshot.
Go to RME --> Admin --> Software Management ---> View/Edit Software Prefrences and check to see if "Include Cisco.com image " for recommendation is selected. If not, check them.
Try a different image that is higher that the current one and or use a GD image.

LMS 3.2 software distribution: no result

Hi,
I have a 3750v2-48PS standalone switch (has been in a stack then removed). I wanted to upgrade its IOS by using LMS.
LMS shows me the following error
When I click on the error, it shows :
Switch has 128MB of RAM. The IOS I want to put into is c3750-ipbasek9-mz.122-58.SE1.bin, which has the following requirements:
FYI, I uploaded this IOS on another identical switch, manually, and it works. This time I want to do it with LMS.
Thanks.

Hi,
Kindly enable the debugging for the SWIM from RME > Admin > System prefrences > log level settings and enable the DEBUG for SoftwareMgmt and ConfigJob and hit APPLY
Now try the job again for one problematic device and wait for the job to complete. Note down the job id.
Kindly share the job id logs from the location :- CSCOpx\files\rme\jobs\SWIM\ -> send me the complete folder of the job id.
Also share the complete screenshot of RME > Admin > Software management > View\ Edit preferences.
Since its stack switch, kindly make sure you are using tar file of image to deploy the images from LMS.
Thanks,
Gaganjeet

Problem with Software Distribution in LMS 3.2

LMS 3.2 on Solaris 10
I'm trying to distribute IOS images via Software Mgmt. I'm getting the following error on step 2 - View Recommendations.
"SWIM0087: Recommendation module timed out while waiting for the procedure to complete.
Either the device had many images to process or one of the services used by this application is not responding.
Either fine-tune the administrative preferences to filter out any unwanted images or check the application logs for more details."
We have two LMS 3.2 systems in a master-slave configuration. Both of which were recently upgraded to LMS 3.2 from 3.0. Software distribution is working as expected on the Slave system. It was working on the Master system before the upgrade to LMS 3.2 also.
I've checked all of the administrative settings I can think of and they match on both systems.
Am I missing something?
Thanks,

Without debugs I can only guess but the symptoms you report could be caused by a few corrupted files.
You could try the following as it has solved similar situations.
Move SharedHelpACE.zip, SharedSwimACE.zip, and SharedSwimGSS.zip somewhere outside the CSCOpx directory.
The files can be found:
\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
As well as:
\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\lib\pkgs
Then restart the services:
net stop crmdmgtd
net start crmdmgtd
If this proves unsuccessful then replace the files in their original locations.

Software Distribution - Problem with 1921 Routers

Hello everybody,
we are having some weird troubles in our Cisco LMS 4.2
A Software Distribution works fine for all kinds of our Routers, except the 1921 models. We are using SCP and SSH for the Image distribution and the exactly same configuration on a 1841 and a 1921 works on the 1841 Router but on the 1921 not.
I didn't found any Bugs related to this, maybe it's a problem with the lms settings?
Done so far:
- Deleted the device in LMS, added it via discovery and manually, no change here
- Tried with different IOS versions, no change here, no one will work
- Set the credentials after adding the device again, to make sure they are valid
When creating a new distribution job, we get this error at Step 3 of 5 only at the 1921 Router, so I guess this might be the problem:
Warning
- SWIM1056: The method to update the software on the selected storage device is unknown.
Select a different Flash partition, if available.
I attached a SWIM_debug logfile from a failed job. (changed all the DNS names do XXXDNSNAMEXXX).
Thanks for your help

More than USB it could be SCP. There is a know bug for SCP on 19xx router :
CSCuc98074 LMS 4.2.2 Software Image Distribution fails with SCP on 1921 routers
Just try to change SCP to other protocol and see it that works. Make sure you have all device packages updated for LMS.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

RME Software distribution

Hello,
I have LMS 3.2 with RME 4.3.1.
I am currently managing approx 30 Nexus 5010's and 5020's. I want to use the software distribution feature within RME, however when i go to the device selector within software mgmt > software distribution > by device - the majority of the devices are greyed out including all of the N5K's. The only devices that are not greyed out are an ACE module and a couple of 3750's. Even 3945 routers are greyed out.
Does anyone know what the problem is here ? - i have a successful archive and inventory of all devices and can make changes using netconfig etc ..
Any advice gratefully received
Phil

I don't have such devices myself, but I think you may want to check the "supported devices table" to see if software distribution is supported on these devices and or if you need to patch/upgrade RME
http://tools.cisco.com/search/JSP/search-results.get?strQueryText=supported+device+table
There you see that an update for RME is required for nexus.
Cheers,
Michel

Adaptiva Software Distribution not working with Cisco APs in Local Mode

A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
Customer locations with Local WLAN AP design create problems for this new software distribution method.
The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
Our WLCs are running at 7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding. Enabling Broadcast forwarding without Reboot did not improve the situation.
Global Multicast Mode and IGMP Snooping are also of no influence.
P2P Blocking Action is "Disabled" within the WLAN setup.
Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
Thank You for answers
Wini

I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
Sent from Cisco Technical Support iPad App

Apple Mobile Device Support won't install via software distribution tool

Trying to install iTunes v10.0.1.22 in corporate environment using a software distribution application. The individual components Apple Application Support v1.3.2, QuickTime v7.68.75 and iTunes v10.0.1.22 all install successfully. Apple Mobile Device Support v3.2.0.47 fails with the following in the install log file:
DIFXAPP: ENTER: ProcessDriverPackages()
DIFXAPP: INFO: 'Component' is 'usbaapl.inf'
DIFXAPP: INFO: Component state 0x2 -> 0x3
DIFXAPP: INFO: 'ComponentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}
DIFXAPP: INFO: 'Flags' is 23
DIFXAPP: INFO: component path is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\
DIFXAPP: INFO: user SID of user performing the install is 'S-1-5-21-1960408961-436374069-1801674531-500'.
DIFXAPP: INFO: creating HKEY_USERS\S-1-5-21-1960408961-436374069-1801674531-500\Software\Microsoft\Wind ows\CurrentVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593} (User's SID: 'S-1-5-21-1960408961-436374069-1801674531-500') ...
DIFXAPP: ERROR 0x57 encountered while creating subkey for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
DIFXAPP: RETURN: ProcessDriverPackages() 87 (0x57)
Action ended 15:59:25: MsiProcessDrivers. Return value 3.
Action ended 15:59:25: INSTALL. Return value 3.
The Apple Mobile Device Support component installs without failure when run manually from a command line but we have not been able to find a way to successfully install running an unattended install via a remote management software distribution tool (in this case Tivoli).
Please help, we need to roll this out to corporate executives to support the new iPhones being supplied to them.

Trying to install iTunes v10.0.1.22 in corporate environment using a software distribution application. The individual components Apple Application Support v1.3.2, QuickTime v7.68.75 and iTunes v10.0.1.22 all install successfully. Apple Mobile Device Support v3.2.0.47 fails with the following in the install log file:
DIFXAPP: ENTER: ProcessDriverPackages()
DIFXAPP: INFO: 'Component' is 'usbaapl.inf'
DIFXAPP: INFO: Component state 0x2 -> 0x3
DIFXAPP: INFO: 'ComponentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}
DIFXAPP: INFO: 'Flags' is 23
DIFXAPP: INFO: component path is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\
DIFXAPP: INFO: user SID of user performing the install is 'S-1-5-21-1960408961-436374069-1801674531-500'.
DIFXAPP: INFO: creating HKEY_USERS\S-1-5-21-1960408961-436374069-1801674531-500\Software\Microsoft\Wind ows\CurrentVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593} (User's SID: 'S-1-5-21-1960408961-436374069-1801674531-500') ...
DIFXAPP: ERROR 0x57 encountered while creating subkey for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
DIFXAPP: RETURN: ProcessDriverPackages() 87 (0x57)
Action ended 15:59:25: MsiProcessDrivers. Return value 3.
Action ended 15:59:25: INSTALL. Return value 3.
The Apple Mobile Device Support component installs without failure when run manually from a command line but we have not been able to find a way to successfully install running an unattended install via a remote management software distribution tool (in this case Tivoli).
Please help, we need to roll this out to corporate executives to support the new iPhones being supplied to them.

Software Distribution & Patching Design Issues - Migration of Packages SCCM 2007 to Application or Conventional Packages in SCCM 2012

Hi All
I am starting in discussion to deep root on Software Distribution & Patching model in large environments from SCCM 2007 migrating to SCCM 2012.
Below are certain assertions i am putting forward for your expert views or you may in a similar situation
1- I have migrated the packages from SCCM 2007 to SCCM 2012 as conventional methods, now i am deploying them [ not migrated the advertisements and collections ], so while deploying i am facing a peculiar situation that the deployment when created is of the
name "<<Package name>>(program)". I am not able to rename the deployment for the conventional packages. is there a way out to that??
2- Will the collection queries work the same in SCCM 2012 as was in SCCM 2007??
3- In SCCM 2012 Primary site there is default role called Site System role in that there is tab for proxy settings. I have observed that if do not check the proxy tab there and punch in proxy IP and port then after some time in the WSUS server the update
source and proxy server tab the proxy option gets unchecked and hence the sync in software update point status appears failed. Is that anyone else also has observed !!!!!
Regards Sushain KApoor

This is a duplicate of
https://social.technet.microsoft.com/Forums/en-US/2ddb8170-529b-4652-830e-fd0ade384b98/software-distribution-patching?forum=configmanagermigration
Please do not double post.
Jason | http://blog.configmgrftw.com | @jasonsandys

Are there any costs for an adobe reader software distribution license ?

Are there any costs for an adobe reader software distribution license ?

No (except for the costs of having your legal team check the license). You do need to read the license carefully, you are making specific commitments and there are specific restrictions.

Error found in Software Distribution log

I found below error in my software distribution log. I think it is related to WSUS and many comptuers are not getting proper patches. Any resolution is really appriciated
2014-11-24 15:27:26.773 UTC   Warning   w3wp.325   SoapUtilities.CreateException   ThrowException: actor = http://xxxx.xxxx.xxxx.com:8530/ClientWebService/client.asmx, ID=e5cd4691-63d8-4740-b5a6-f732027896db,
ErrorCode=ConfigChanged, Message=, Client=e78cd58f-cb87-4829-945d-d5ab39d8486d

What do you mean of "not getting proper patches"?
Did these clients fail to update with any error code?
Almost certainly the above log entry is occurring in combination with an 0x8024400D error code ... a very common manifestation of duplicated SusClientIDs.
The log snippet on the client side would look something like this:
2012-02-09 10:02:34:595 948 1994 PT WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2012-02-09 10:02:34:595 948 1994 PT WARNING: SOAP Fault: 0x00012c
2012-02-09 10:02:34:595 948 1994 PT WARNING:     faultstring:Fault occurred
2012-02-09 10:02:34:595 948 1994 PT WARNING:
ErrorCode:ConfigChanged(2)
2012-02-09 10:02:34:596 948 1994 PT WARNING:     Message:(null)
2012-02-09 10:02:34:596 948 1994 PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
2012-02-09 10:02:34:596 948 1994 PT WARNING:     ID:6b1c0796-e40b-4800-a3c9-d75624d59acf
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

The new Business Volume Purchase Program is pretty interesting...it can be used to centrally purchase and distribute paid ( not free) items from the AppStore. We are getting setup to use it. You can keep an eye on licenses etc. You can also use a single centralized form of payment.
http://www.apple.com/business/vpp/

DISM Command to retrieve updates from software distribution and apply to wim file

I'm following
this guide about slipstreaming updates into a wim file. What im attempting to is what the author outlines in step 2, namely pulling updates from the software distribution folder on a pc that has had the image applied to it and then patched to current. The
trouble I'm running into is around the command. namely this section DISM
/image:C:\Mount
/add-package /packagepath:”%U” Running this command produces a invalid path message. What should be happening is the previous commands
are telling it to pull in any files name .cab from all of the directories, but this doesn't seem to be working. I can't define this as a static path as there are tons of sub-folders in this directory with the cab files. Am I just doing something wrong? how
can I accomplish this?

I'm still having trouble with this. For some reason, it is stripping the % sign. So I am seeing this when I run my batch file:
/add-package /packagepath:"u"
or
/add-package /packagepath:"f"
Any ideas?

Software distribution flow in SCCM 2012

Could someone of you help me to understand the software distribution flow in SCCM 2012 (Troubleshooting flowchart),
which includes the content library concepts..

There is also a troubleshooting book which explains it very well.
http://blogs.msdn.com/b/microsoft_press/archive/2013/11/12/free-ebook-microsoft-system-center-troubleshooting-configuration-manager.aspx
Cheers,
Thomas Kurth
Netree AG, System Engineer
Blog:
http://netecm.netree.ch/blog | Twitter:
| LinkedIn:
| Xing:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

LMS 4.0 Software Distribution

Similar Messages

Maybe you are looking for