LMS 4.1 Device Package Update

Hi,
I'm having problems updating packages for my new install of LMS Prime 4.1 and hoped someone here could help in diagnosing why. I've attached the psu.log file.
Thanks in advance.

Yeah, for Inventory Config And Image Management (the traditional RME functions, in LMS 3.x lingo), you have to perform a separate "Software Update" (vis-a-vis Device Update, which is apparently for CiscoView). That's described in the same aforementioned URL, a little further up, Admin -> System -> Software Center -> Software Update:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/admin/swcenter.html#wp1096852
The following page describes, in not-so-clear terms, whether it's Software Update or Device Update that's needed to get newer hw/sw recognized by the various pieces of LMS 4.1.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html

Similar Messages

LMS 4.1 Device Packages Update Installation

Hello, i used the software center to download latest device packages, all downloaded to PSU_Downloads folder , i want to know how to install them with GUI if possible , as i tried to use CLI but it seems that i'm using bad syntax.
Best Regards.

The cli syntax can be a bit tricky. If you have already downloaded the updates, you can perform the updates using the downloaded copies as your source. Please see step 2 of the procedure listed here, specifically:
To check for updates from a server, select the Enter Server Path radio button and enter the path or browse to the location using the Browse tab.

LMS 4.2 fails Device Package Update

Hallo,
Device Package Update fails with this error:
Error while downloading package information from Cisco.com for the selected products. See the d:/CSCOpx/log/psu.log file for details.
PSU.log shows:
ERROR [RemoteRepSync : downloadPsuHeadersAsXml] : VDSException thrown com.cisco.nm.xms.vds.VDSException: CcoDownloadAdapter::getXmlFileList():IOException:connect timed out
best regards
Alex

What is the exact model of 3850 switch you're trying to monitor?
Following are the supported models :
Device Name
sysObjectID
Supported Software Version
Support Type
Device Name
sysObjectID
Supported Software Version
Support Type
Cisco Catalyst 3850-48P-E Switch
1.3.6.1.4.1.9.1.1641
Device Update
Cisco Catalyst 3850-48P-S Switch
1.3.6.1.4.1.9.1.1643
Device Update
Cisco Catalyst 3850-24P-E Switch
1.3.6.1.4.1.9.1.1642
Device Update
Cisco Catalyst 3850-24P-S Switch
1.3.6.1.4.1.9.1.1644
Device Update
Cisco Catalyst 3850-24U-E Switch
1.3.6.1.4.1.9.1.1767
03.11.35.EMP
Device Update
Cisco Catalyst 3850-48U-E Switch
1.3.6.1.4.1.9.1.1768
03.11.35.EMP
Device Update
If it is 3850-24p-L, it can be :
CSCuj61704 No support for 3850-24p-L in LMS 4.2.3
Try updating your mdf device package as well. Device package for Common Services.
For current Nexus device package issue, each device package is not individual, but has some dependant packages. Without which they are tend to fail during installation check.
You can select all the available device packages and try to install. It seems you dont have SharedDcmaIOS (3.1.7) installed and hence the package is failng due to pre-requisite.
You have to install each package which fails which consistancy check on other packages.
For mdf package update, you can select common service as well and check for update.
There may be some 3850 device packages already available, please share output of following command for us to see :
NMSROOT/bin/psucli -p rme -q -all
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

RME 4.0.6 Device Package update failure

Hi,
i have downloaded a lot of new device packages for the RME 4.0.6. If i install this packages i get the following error message.
Installation failed for product [Resource Manager Essentials] with message : com.cisco.nm.xms.psu.packagemgmt.InstallerException: Repository in use.
Another Package Support Updater client session may be modifying device support.
I searched for the psu.lock file but i couldn't find this file. How can i fix this without reinstalling the lms?
AndrÃ©

Hi,
i have attached the psu.log file. There is no .lock file, i've checked this again. I tried again to update the device packages
After 1 hour i stopped the update.( normaly an update take max. 10 minutes. During the device package update i could see the the psu.log file was going into a loop. It starts at 0 kbytes -> growing to nearly 950kbytes and than it starts again at 0 kbytes
Andre

LMS 4.2 Device Update without a proxy server

I'm running LMS 4.2.2, and when I try to initiate a device package update via the webinterface, it fails because I do not have a proxy server configured. Is there a way to tell LMS that I don't want it to use a proxy? I have my cisco.com creds in place, and the proxy fields left blank, but it tries anyway, and I can't find anywhere to tell it to ignore the proxy.

I solved this myself, it seems I had my DNS entries on the Soft Appliance entered incorrectly, so it threw a "cannot find proxy" rather than "cannot resolve hostname" error.

Device packages for LMS 3.2

Hello,
Can someone point me in the right direction to download device packages for LMS 3.2 for Solaris.
Thanks,
Tim
GSP

Hi Tim
Are you referring for device packages for RME ? If so which version of RME do you have ? You can downlaod device packages from CCO using this URL:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=4.3.1&mdfid=282635175&sftType=CiscoWorks+Resource+Manager+Essentials+Device+Package+Updates&optPlat=&nodecount=2&edesignator=null&modelName=CiscoWorks+Resource+Manager+Essentials+4.3&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y
Hope this helps.. All the best..
Raj

CiscoView Device Package

What is the process to obtain device packages if they are currently not installed (CS -> Device Update -> CiscoView)?
CiscoWorks Common Services
3.1.0
Licensed
CiscoView
6.1.6
Licensed
LMS Portal
1.0.0
Licensed

Since you are on LMS 3.0 we should get you to LMS 3.2.
https://cisco.mediuscorp.com/market/networkers/homeWork.se.work
The license for 3.0 will work for 3.2 as well.
Then install the latest service pack LMS 3.2.1.
Release March 26th 2011
Windows:
http://www.cisco.com/cisco/software/release.html?mdfid=282635181&flowid=16561&softwareid=280775102&os=Windows&release=3.2.1&relind=AVAILABLE&rellifecycle=&reltype=latest
Solaris:
http://www.cisco.com/cisco/software/release.html?mdfid=282635181&flowid=16561&softwareid=280775102&os=Solaris&release=3.2.1&relind=AVAILABLE&rellifecycle=&reltype=latest
Once you are on LMS 3.2.1 you can use Software Center in LMS to see if you need any device packages for any of the application in the LMS bundle.
Ciscoview is one application you can check for device package updates, however make sure you update to LMS 3.2.1 first and then focus on the device packages for each app.

LMS 2.6 / RME 4.0.6 : Update device packages

Hi All,
I want update device packages for the device Unknow c3560v2 and ME2400 on ciscoworks lms 2.6.
CCS= version 3.0.6
CM= version 4.0.10
CV = 6.1.5
DFM = 2.0.7
IPM = 2.6.0
RME = 4.0.6
The server doesn't have access internet so i downloaded files and copy this on directory psu.
1) I've tried directely upgrading the device package in RME, but it failed. He want file mdf v1.22 and the version is V1.20.
2) I've upgrading CiscoView for device, it's ok
3) I've upgrading Campus Manager with version 4.0.13, it's ok
4) I've tried upgrading the device package in RME, but it failed. He want file mdf v1.27 and the version is V1.25 after upgrade Campus.
I don't find on site cisco the version 1.27 of mdf, where i can found this file ?
I have the version 1.56 but it's compatible for LMS 2.6 and RME 4.0.6 ?
How can uninstall a version of mdf if I have a problem with this version?
thanks

Indeed. It does look like the only MDF available is 1.52 for CS 3.0
I also saw the note:
You must install Campus Manager 4.0.13 and MDF 1.27 before installing CMDeviceUpdates 2.0.
RME 4.0.6 Release Notes
FYI. LMS 2.6 is EOL. As such I suggest you contact your account team to see if they can acquire it for you.
Thanks.

How to update a device package in LMS 4.1

I am adding SUP 2 T's into the network and need to have LMS monitoring them. I have not yet been able to figure out where to upgrade the device package so that I can add the SUP 2 T's

Yeah, for Inventory Config And Image Management (the traditional RME functions, in LMS 3.x lingo), you have to perform a separate "Software Update" (vis-a-vis Device Update, which is apparently for CiscoView). That's described in the same aforementioned URL, a little further up, Admin -> System -> Software Center -> Software Update:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/admin/swcenter.html#wp1096852
The following page describes, in not-so-clear terms, whether it's Software Update or Device Update that's needed to get newer hw/sw recognized by the various pieces of LMS 4.1.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html

LMS 4.2.3 Device pack update

Hi
Im trying to update the device pack for LMS 4.2.3, since the existing pack doesnt include 3850s. I went to Device update -> clicked inventory config and image management -> check for updates. It gives me the following error:
A PSU Task is currently been executed by another user.Only one PSU Task can be executed at a time.Please wait for the current Task to complete. The details of the currently running PSU Task are as below:
PSU Task :
Device Updates
Task Started at:
Wed Mar 05 14:16:09 EST 2014
Task Started by:
admin
NOTE : If you are sure no other download is happening , please delete the file D:\CISCOW~1\Psu.Lock
If im doing the manual way, I went to CCO and downloaded this file:
Inventory Config and Image Management Device Package version 2.12.9 for SharedSwimIOS Over LMS 4.2.3
SharedSwimIOS.RME523.v2-12-9.zip
but there is no documentation on how to manually install this ? can someone help me solve this please ?
Raj

What is the exact model of 3850 switch you're trying to monitor?
Following are the supported models :
Device Name
sysObjectID
Supported Software Version
Support Type
Device Name
sysObjectID
Supported Software Version
Support Type
Cisco Catalyst 3850-48P-E Switch
1.3.6.1.4.1.9.1.1641
Device Update
Cisco Catalyst 3850-48P-S Switch
1.3.6.1.4.1.9.1.1643
Device Update
Cisco Catalyst 3850-24P-E Switch
1.3.6.1.4.1.9.1.1642
Device Update
Cisco Catalyst 3850-24P-S Switch
1.3.6.1.4.1.9.1.1644
Device Update
Cisco Catalyst 3850-24U-E Switch
1.3.6.1.4.1.9.1.1767
03.11.35.EMP
Device Update
Cisco Catalyst 3850-48U-E Switch
1.3.6.1.4.1.9.1.1768
03.11.35.EMP
Device Update
If it is 3850-24p-L, it can be :
CSCuj61704 No support for 3850-24p-L in LMS 4.2.3
Try updating your mdf device package as well. Device package for Common Services.
For current Nexus device package issue, each device package is not individual, but has some dependant packages. Without which they are tend to fail during installation check.
You can select all the available device packages and try to install. It seems you dont have SharedDcmaIOS (3.1.7) installed and hence the package is failng due to pre-requisite.
You have to install each package which fails which consistancy check on other packages.
For mdf package update, you can select common service as well and check for update.
There may be some 3850 device packages already available, please share output of following command for us to see :
NMSROOT/bin/psucli -p rme -q -all
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

LMS 3.2 Device update

Hi,
When I check for new device update at cisco.com, I got these lines at psu.log - attached.
Is this a bug?
Balazs

Hi ,
Replace the attached file (vds.properties) from the below location :
C:\Program Files\CSCOpx\lib\classpath\com\cisco\nm\xms\vds
then Restart the Daemon Manager ..
NOTE : Please take the Bcakup of your Existing file (vds.properties)
--Then go to common service > software center > device update >> check for the Device Pcakages , you will be able to see the Device Packages now..
Thanks--
Afroj
If this post answers your question, please click the "Correct Answer" button"

Can't update device package for adobe DC in cd photo shop CS3 beta)

i've installed device central from CD Photoshop CS3 BETA ,
the problem is i can not install new device package for the file
that download from net , and it always shown ( the file update is
too new for this version of adobe device central ).... somebody
help me please ?

I am pretty sure that the Device Central that came with
Photoshop CS3 BETA is different from the official release of Device
Central that comes with CS3 products.
I had Photoshop CS3 BETA and DC working. Then I bought a
licenced copy of Flash CS3 and Device Central. The new device
package installed perfectly on the newer version of DC. However,
now that I have installed the new Device Central, I can't launch DC
from Photoshop CS3 BETA—it gives me an error.
That said, DC works great—with the update—but
only via Flash CS3 (or some other official launch product).

Update Flash Professional CC and Mobile Device Packaging

The adobe crative cloud app says that I have an upgrade for Flash Professional CC and Mobile Device Packaging. It has been failing for as long as I can remember. How do you download and install the update?
R/Jens

Here are the individual Flash updates: http://www.adobe.com/support/flash/downloads.html

Device package error for switch Cat2960

Hi,,
We are installing device package for switch Cat2960. But we get below error message when trying to install the same.
WARNING : Cat2960(6.1):Consistency check failed for base package SharedDcmaIOS
When trying to updgrade the SharedDcmaIOS to higher version we get the below error message.
SharedDcmaIOS, SharedNetshowIOS, SharedSwimIOS
WARNING : SharedSwimIOS(2.5.1):Consistency check failed for base package LibSwim
WARNING : SharedNetshowIOS(2.2.1):Major versions are incompatible for base package [SharedNetshowIOS]. Required version = 1.0, Found version = 2.2
Kindly guide us in resolving the above issue related to device pacakage installation.
License Info:
Bundle             Installed/Updated on
LMS2.6            18 Jun 2009
Name      Version      Size         Status        Expiration Date
1.CM         4.0       Unlimited    Purchased      Never
2.DFM       2.0       Unlimited    Purchased      Never
3.IPM        2.6      Unlimited     Purchased      Never
4.RME       4.0      Unlimited     Purchased      Never

Hi,
We are using LMS2.6 and you have provided solution to install / upgrade to LMS 2.5.1
We are installing the device package Cat2960.RME43.v6-1 for switch 2960
Supporting device package we are installing are
SharedSwimIOS.RME43.v2-5-1
SharedDcmaIOS.RME43.v2-4-1
SharedNetshowIOS.RME43.v2-2-1
When installing we get the error Consistency check failed for base package.
Regards,
Rakesh Prasad

SW download: unable to download Cisco View device packages and CVW patches

With the current Software Download frontend I cannot find a way to download ciscoview device packages and software patches; I can get these files through the "Software Search" feature but that's hardly what I need. To update a LMS server that is not allowed to connect to the internet it is necessary to have the option to download these device packages and patches in a bulk....
just tell me where to click.... :-)

Hi Martin,
Is this better? http://www.cisco.com/cgi-bin/tablebuild.pl/cview50

LMS 4.1 Device Package Update

Similar Messages

Maybe you are looking for