LMS 4.1 error unable to load the MIB file

when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI
I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my
Thank

The following thread has RFC-1212.my in it. You can downlaod from there :
https://supportforums.cisco.com/thread/174886
Mostly all the Cisco MIB will be available @ :
ftp://ftp.cisco.com/pub/mibs/v1/   OR ftp://ftp.cisco.com/pub/mibs/v2/
The above you requested are non-cisco mib, which can be extracted either from RFC or they canbe found in some univerisites FTP or some free sites like oidview :
http://www.oidview.com/mibs/detail.html
-Thanks
Vinod

Similar Messages

  • Error: Unable to load the GSS-API Shared Library

    Hi all,
    I'm trying to install a working copy of SAP on a Debian Etch host. I've tried all versions available here: ftp://ftp.sap.com/pub/sapgui/java/  (710 r[2-6])  The jar installer completes successfully without error, but when I attempt to launch the application, I'm greeted with the same critical error each time. Here's my connection string:
    conn=/M/my-server-hostname/S/3610/G/PRD_GENERIC&sncon=true&sncqop=3
    Here's my (Sun) java version:
    java version "1.6.0_06"
    Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
    Java HotSpot(TM) Server VM (build 10.0-b22, mixed mode)
    Here's the full error message:
    Error: Unable to load the GSS-API Shared Library
    named "sncgss.so"
    Fri Nov 21 16:07:25 2008
    Release 710
    Component SNC (Secure Network Communication), version 5
    rc = -1, module sncxxdl_mt.c, line 342
    Detail SncPDLInit
    System Call dlopen
    Is there a software dependency I might be missing? This is my first attempt at installing SAP on a Linux host, so there may be something else even more obvious that I'm not seeing...
    Thanks in advance for any help you can provide.
    -Eric

    Hi,
    one solution should be to set the env variable $SNC_LIB to you libseude.so, e.g.
    $>setenv SNC_LIB /usr/sap/<sid>/SYS/exe/run/libsecude.o (or wherever the lib resides)
    and then restart guilogon.
    Also, as fas as I know, SAPGUI has issues with Java 6, so I would rather go with Java 5 or 1.4.2.
    Oliver Stabel

  • What does the error "Unable to lock the following files:" mean?

    What does the error "Unable to lock the following files:" mean? After the colon in this error message, a path to the .icml file is listed. We are using InDesign CS6 with InCopy CS6 (Mac), assignment-based workflow, on a shared server.
    Thanks,
    Gita M

    Sounds like a permissions issue on that server.
    Bob

  • Attempting to update Bridge CC and Photoshop CC 2014 generates error "Unable to extract the downloaded files. Press Retry to download again.(U44M1I210)

    Attempting to update Bridge CC and Photoshop CC 2014 from the Creative Cloud program generates error "Unable to extract the downloaded files. Press Retry to download again.(U44M1I210). I am running Windows 7. Previous traffic on this topic has not helped my situation.

    Please clean AAM cache By deleting following folder contents: 
    For Mac:
    ·        /Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
    For Win:
    ·        C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0
    Then try running Updates.
    Regards,
    Ashutosh

  • Essbase Error : Unable to load the dll essapinu.dll.

    Hi Guys,
    I have imported a essbase cube in the OBIEE. The import went fine, then i made the logical model and presentation layer. Now when i am selecting column from that cube in BI answers, i am getting this error:
    *State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. The specified module could not be found. [nQSError: 36001] Unable to load the dll essapinu.dll. (HY000)*
    Any idea how to solve this. BTW the installation of essbase server went fine and also this dll is present in the hyperion server directory.
    Thanks in Advance

    hi,
    check this blog...
    it refers to essbase...maybe he/she know more...
    http://www.rittmanmead.com/2009/07/27/oracle-bi-ee-10-1-3-4-1-essbase-connectivity-repository-design-enabling-drills-on-evaluate-columns-part-1/
    Check with google and in others blogs..you may find something useful
    hope i helped....
    http://greekoraclebi.blogspot.com/
    ///////////////////////////////////////

  • Error message: Cannot load the rpt file

    Can anyone please help.
    I created a Crystal Report which I deployed into Business One. Tested this report on about 13 machines running Business One and all running well except one machine where it comes up with the following error messages:
    1: Cannot load the rpt file
    2: Object reference not set to an instance of an object
    3: Invalid report file path
    I have tried logging into Business One on that machine as a different user and encountered the same issue. Then logged onto another machine as the user who uses the machine with the error message and her profile works well on another machine.
    This is leaving me with concluding this problem could be down to the machine but cannot figure out how to fix it.
    Does anyone have any ideas to solving this?
    Thanks
    Tony

    Hi Tony,
    On the troubled computer, check in Control Panel whether Crystal Report Runtime is installed. If not, un-install client app and re-install from B1_Shr client's folder. The first thing that it will do is to instal Crystal Report Runtime.
    Source: when I did an upgrade on a client recently this happened. After troubleshooting everything I found that this issue is a hit-and-miss as some PCs had it some don't. I started comparing between working and non-working PC and found this is the only difference I could found.

  • Unable to load the flat file  from client  work station

    Hi,
    I am trying load a flat file (.CSV file)from my desktop (Client work station) and getting the following error.
    An upload from the client workstation in the background is not possible
    Message no. RSM860
    Diagnosis
    You cannot load data from the client workstation in the background.
    Procedure
    Transfer your data to the application server and load it from there.
    I have recd a .XLS file and then I have converted to .CSV file , which I saved in my desktop and trying to load the same.
    Please help me how to go about this?...
    Thanks in advance.
    Christy.

    Hi All,
    Again, I have tried to load the flat file from clint work station with direct loading..I have got the following errors..
    Errors : 1
    Record                                                  990: Contents '50,000' from Field /BIC/ZPLQTY_B Not Convertible in Type QUAN -> Long Tex
    like this i recd so many errors.
    ERROR : 2
    Error in an arithmetic operation in record 259     
    Please help me how to load the flat file successfully.
    If I hv to save the flat file in Appl server..how to do that..Please provide step by step instruction..
    Thanks
    Christy

  • Opatch error 'Unable to parse the xml file'

    Hi there,
    I am new to installing patches on Oarcle and I need to install patch 12375678 on my windows system, Oracle 11.2.0.2.
    I have followed the instructions in the readme.txt file, but got this error and I have not come across anywhere on the web that explain how I could fix it.
    Could you please advise?
    Thanks
    C:\>set oracle_home=C:\oracle\product\11.2.0\dbhome_1
    C:\>echo %oracle_home%
    C:\oracle\product\11.2.0\dbhome_1
    C:\>cd C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678
    C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678>opatch apply
    Invoking OPatch 11.2.0.1.1
    Oracle Interim Patch Installer version 11.2.0.1.1
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    Oracle Home : C:\oracle\product\11.2.0\dbhome_1
    Central Inventory : C:\Program Files\Oracle\Inventory
    from : n/a
    OPatch version : 11.2.0.1.1
    OUI version : 11.2.0.2.0
    OUI location : C:\oracle\product\11.2.0\dbhome_1\oui
    Log file location : C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch2
    012-05-21_15-28-52PM.log
    Patch history file: C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch_
    history.txt
    ApplySession applying interim patch '12375678' to OH 'C:\oracle\product\11.2.0\d
    bhome_1'
    Running prerequisite checks...
    OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
    cal system only.
    Backing up files and inventory (not for auto-rollback) for the Oracle Home
    Backing up files affected by the patch '12375678' for restore. This might take a
    while...
    Backing up files affected by the patch '12375678' for rollback. This might take
    a while...
    Patching component oracle.rdbms, 11.2.0.2.0...
    Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\xml\xsl\kuexttbl.xsl"
    Patching component oracle.rdbms.dbscripts, 11.2.0.2.0...
    Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpd.plb"
    Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpw.plb"
    ApplySession adding interim patch '12375678' to inventory
    Interim Patch metadata parsing failure... 'Unable to parse the xml file.'
    ApplySession failed: ApplySession failed in system modification phase... 'Unable
    to create patchObject'
    OPatch will attempt to restore the system...
    Restoring the Oracle Home...
    OPatch was able to restore your system. Look at log file and timestamp of each f
    ile to make sure your system is in the state prior to applying the patch.
    OPatch failed with error code = 73

    your actions.xml must not be able to be read.
    open it in notepad yourself to see does it open, if so its not corrupt, if doesnt open download patch again.
    More then likely will be fine so try locate the patch in a shorter home path, like c:\patches\12375678 and see does it install from there.
    Only other thing I can think of is the main inventory.xml, usually c:\program files\oracle\inventory\inventory.xml
    try notepad with that too.

  • Unable to load the '.jsp' file

    Hi all,
              We use Weblogic 8.1 sp3 and are devloping a struts based application.
              I have deployed my 'ear' file (containing a '.war' and a '.jar' file). We use struts. Our '.war' file, contains the pre-compiled 'jsp' classes (we have changed our web.xml to indicate that we are using pre-compiled jsps. I can show my web.xml file if you need).
              When I click on my 'submit' button, I see that my action class has been invoked and it's spitting out messages to the stdout. Everything looks fine. But, when it is trying to load the '.jsp', I get the following error.
              <b>
              Error 500--Internal Server Error
              javax.servlet.ServletException: [HTTP:101249][ServletContext(id=20736651,name=gta,context-path=/gta)]: Servlet class jsp_servlet._presentation._jsp.__link for servlet /presentation/jsp/Link.jsp could not be loaded because the requested class was not found in the classpath C:\bea\8.1sp3\user_projects\domains\gta\gtaServer\stage\_appsdir_gta_ear\gtaweb.war;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-beanutils20573.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-collections20574.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-digester20575.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-fileupload20576.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-lang20577.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-logging20578.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-validator20579.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\jakarta-oro20580.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\jstl20581.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\standard20582.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\struts20583.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\_wl_cls_gen.jar.
              java.lang.ClassNotFoundException: jsp_servlet._presentation._jsp.__link.
                   at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:824)
                   at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:535)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:373)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
                   at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:312)
                   at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
                   at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:274)
                   at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
                   at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:320)
                   at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
                   at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
                   at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
                   at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                   at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                   at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
                   at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
                   at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
                   at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
              </b>
              I have looked in the '.war' file and it contains the above mentioned precompiled class (_link).
              Could anyone point me in the right direction??

    Hi,
              Could you check that whether the jsp file is placed in right place or not ?
              Regards
              Anilkumar kari

  • Error in when loading the flat file for hierarchy

    Hi all,
    I get this error when i do the entire Hierarchy process and try to upload the flat fil in the infopackage.
    Has anyone faced this kind of error.
    No Transfer Structure Available SS_DEMOH IO_SRID_HIER (SY-SUBRC=5)
    Can someone tell me how to proceed further.
    Harish

    Hi lakshmi,
    I have checked it thrice before loading it through infopackage.Everything is fine.
    Harish

  • Unable to load the cap file to the JCOP card

    I develop my applet by JCOP IDE and it works well in the VM. But when I want to load it on my JCOP card, I face a problem. it can successful send the 1st 254 bytes, but always return 6A86 when send the second 254 bytes to the card.
    Status: Incorrect parameters (P1,P2)
    Error code: 6a86 (Incorrect parameters (P1,P2))
    Offending APDU: 6A86
    Wrong response APDU.
    I don't know why this happen. Can anyone show some light on that. Thank you in advance.

    Have you written your own loader for this ?
    What is the prompt "cm>" from, is that a standard Java Card tool ?
    Looking at the data I can see, its looks well formed. However when I wrote my own loader I found I could only send 239 bytes of data (255 - 16) otherwise I'd get an error. Maybe part of this is todo with the option of using M-DAP to MAC each APDU. FYI its a JCOP10 I'm using.
    Also my data was never concatentated, that is to say, check your 'FileSystem.cap' file with "unzip -tv FileSystem.cap" for the real CAP files. Each of these files never crossed an APDU boundary, the first one Header.cap (IIRC) is a small file, so my first APDU was less than 40 bytes of actual data (with C4 TLV data before it), certainly not 254 bytes.
    I'm not sure if this is allowed or not, I've plans to try it out soon and see myself since i've not read anything that says you can not do this.
    This is the only obvious difference I can see to other loader scripts and programs I have seen.

  • Getting an "unable to Load the tables in the power pivot window" error

    Hello,
    I have 2 worksheets in a excel file and would like to load both into a power pivot table. When I click the 'create linked table' in the pwer pivot ribbon, The powerpivot window open and looks like its about to load the data but then I get
    a popup dialogue box with the following error:
    Unable to load the tables in the powerpivot window 
    ============================
    Error Message:
    ============================
    The given key was not present in the dictionary.
    ============================
    Call Stack:
    ============================
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
       at Microsoft.AnalysisServices.Modeler.SheetTabs.PopulateSheetList(String selKey)
       at Microsoft.AnalysisServices.Modeler.SheetTabs.SetSelectedSheet(String key)
       at Microsoft.AnalysisServices.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    ============================
    When I try again, there is a meesage saying the table is already linked but I dont see any data.
    has Anyone seen this error before and know what to do?
    Thanks,
    Nathan

    Hi
    I get first the same error as above but after I look into the details I see the following error message:
    in translation the error message is: There is already a item with the same key added.
    I can open the power pivot window in diagram view. And after I refresh the data in one of the tables I can open it in the table view. I have already searched for "!" signs in the calculations and searched for calculations with same name but that
    is not the problem.
    Also I can't open the synonym window. I think this has something to do with it because I've made changes in the synonyms.
    ============================
    Foutbericht:
    ============================
    Er is al een item met dezelfde sleutel toegevoegd.
    ============================
    Aanroepstack:
    ============================
       bij System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       bij Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(Tuple`2 measure, SynonymCollection synonyms)
       bij Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
       bij Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
       bij Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
       bij Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    ============================
    Thanks,
    Leo

  • Unable to load the kernel module 'nvidia.ko' [SOLVED]

    After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
    Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
    cat /var/log/nvidia-installer.log
    ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
    frequently when this kernel module was built against the wrong or
    improperly configured kernel sources, with a version of gcc that differs
    from the one used to build the target kernel, or if a driver such as
    rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
    obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
    installed in this system is not supported by this NVIDIA Linux graphics
    driver release.
    Please see the log entries 'Kernel module load error' and 'Kernel
    messages' at the end of the file '/var/log/nvidia-installer.log' for
    more information.
    -> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
    -1 No such device
    -> Kernel messages:
    NVRM: This can occur when a driver such as nouveau, rivafb,
    NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
    NVRM: the NVIDIA device(s).
    NVRM: Try unloading the conflicting kernel module (and/or
    NVRM: reconfigure your kernel without the conflicting
    NVRM: driver(s)), then try loading the NVIDIA kernel module
    NVRM: again.
    NVRM: No NVIDIA graphics adapter probed!
    NVRM: The NVIDIA probe routine was not called for 1 device(s).
    NVRM: This can occur when a driver such as nouveau, rivafb,
    NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
    NVRM: the NVIDIA device(s).
    NVRM: Try unloading the conflicting kernel module (and/or
    NVRM: reconfigure your kernel without the conflicting
    NVRM: driver(s)), then try loading the NVIDIA kernel module
    NVRM: again.
    NVRM: No NVIDIA graphics adapter probed!
    NVRM: The NVIDIA probe routine was not called for 1 device(s).
    NVRM: This can occur when a driver such as rivafb, nvidiafb or
    NVRM: rivatv was loaded and obtained ownership of the NVIDIA
    NVRM: device(s).
    NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
    NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
    NVRM: support), then try loading the NVIDIA kernel module again.
    NVRM: No NVIDIA graphics adapter probed!
    ERROR: Installation has failed. Please see the file
    '/var/log/nvidia-installer.log' for details. You may find suggestions
    on fixing installation problems in the README available on the Linux
    driver download page at www.nvidia.com.
    Last edited by wsims (2010-06-22 15:06:04)

    if you used the packages from repos, the blacklist is done automatically in nvidia,
    $ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
    /etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
    $ cat /etc/modprobe.d/nouveau_blacklist.conf
    blacklist nouveau
    but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
    Last edited by wonder (2010-06-22 14:10:01)

  • Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

    Hi there,
    I recently had the following situation, where I changed the source of my CSV file in Power Query.
    Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
    But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
    But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
    This is what I get from the Call Stack
       at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
       at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
       at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
       at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
    If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
    Has anyone had this before and know how to fix it?
    http://www.bidn.com/blogs/guavaq

    Hi there
    I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
    Thanks
    Gilbert
    http://www.bidn.com/blogs/guavaq

  • Unable to load the 'C:\InetPub\robohelp\' project.  The project is invalid.

    We're having troubles opening/viewing our 'prepsmart' project
    on our production server. (It works fine in our test environment).
    I have tried re-installing RoboEngine 4.0, and successfully
    re-generated and re-published the project to the server. However,
    when I try to access the project using a url like:
    http://<servername>:<port>/RoboAPI.asp?project=prepsmart&context=700,
    it displays the message: "Contragulations The RoboEngine has been
    successfully created. To get started using RoboEngine, you need to
    publish a project. Please see the getting started guide or
    deployment manual that corresponds to your authoring tool for more
    information. "
    I see the same screen if I click on "View Project" within the
    RogoEngine Configuration Manager.
    When I click the Troubleshoot icon in the Configuration
    manager, it lists the following errors:
    Unable to load the 'C:\InetPub\robohelp\' project. The
    project is invalid.
    Project prepsmart cannot be found.
    Unable to locate the ' ' window.
    Cannot find the list of projects.
    If I specify a specific page (i.e.
    http://denpiis01:8000/Robo/BIN/Robo.dll?tpc=/robo/projects/prepsmart/Getting_Started.htm),
    it displays the help page. So, I
    think the web site is configured and working OK.
    Any ideas why I can successfully publish the project, but
    RoboEngine can't find the project?
    Thanks,
    Greg

    Hello Vipul Kumawat,
    I saw a related thread from here:
    http://stackoverflow.com/questions/15246449/visual-studio-xaml-designer-not-getting-loaded
    Their solution is related to fix corrupt Visual Studio.
    So may I clarify the following:
    1. What's your Visual Studio version?
    2. Have you ever tried to repair Visual Studio from control panel first?
    3. Can you reproduce this issue when access any other new projects? For example, Store App, WPF App, or even new simple Windows Phone app? What's the result if you use them?
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for