LMS 4.1 Histograph error

                   Dear all,
                           When I check the device information,on Monitor> Troubleshooting Tols>Troubleshooting Workflows As shown in figure
                        When I want check HistoGraph ,there is a mistake.
Can you help me
Thank you

Hi all,
got a solution from TAC.
Via https:///dbreader/dbreader.html the column SlotNum has to be manually added in RME-DB
SQL-Statement
ALTER TABLE PhysicalElement ADD SlotNum integer
Now it works.

Similar Messages

LMS 4.0 install error

I get following install error in the begining of LMS 4.0 installation:
Error Code: -5006 : 0x80030020
Error Information:
>Kernel\CABFile.cpp (648)
>SetupNew\setup.cpp (603)
PAPP:
PVENDOR:
PGUID:
$15.0.0.603
@Windows Server2003 Service Pack 2 (3790)
IE Version: 7.0.5730.13
I found some bug: CSCti76696 that resembles to this, but it is not yet publicly available in the bug toolkit...
Has anyone experienced simmilar problem during 4.0 installation?
BR,
Jasmina

Hi,
Thanks for the reply Joseph!
Setting DEP to only protect critical Windows system files, and re-installing LMS afterwards, did not help. I'm still getting the error during installation.
I believe all other installation pre-requisites are fulfilled.
After the installation (both: the first and the second time), I noticed some additional problems:
e.g. Devices are successfully discovered, but after server reboot, all devices disappear from DCR!?!?
Trying to list All devices in DCR says that there are no devices (0 devices)...
Installation, and also LMS processes start after server reboot, seems to be quite slow (~90min for installation, and ~10min for LMS to become relatively functional after server reboot).
When trying to open "Inventory> Job Browsers> Device Credentials Verification"window, I get the error: "CDA0114: Operation failed while connecting to JRM. Make sure jrm and/or CTMJrmWrapper services are up and running."
I opened a TAC case, but no solution for now.
If anyone has some additional idea, it is most welcomed
Anyway, I will post a solution here if I get one from the TAC...
Best regards,
Jasmina

Cisco LMS 4.0 Getting Error

I am trying to install LMS 4.0 getting errors(Attached error)

Hi,
Go to the software download section on Cisco website and search there for a patch that is specifically posted there for installing LMS on a Windows Server 2003 R2 machine.
According to the readme file for LMS 4.0, you must use this "patch" if you want to install LMS on this OS. Read more in the readme document for LMS 4.0
Please mark this as an answer for your question if it does solve your problem.
Sent from Cisco Technical Support iPhone App

ORA-484 LMS* process terminated with error

Instance is crashing frequently with the ORA-484 LMS* process terminated with error. Oracle RAC 10.2.0.3 on HP_UX 11i on ASM. Please advise

The problem got solved after installing an interim patch p5375583_10203_HP64

LMS 3.2 - Backup-Error -- ERROR(908): Cannot create or back up tar file

Hello again,
with performing backup (LMS 3.2 on Solaris 9) the following errors will arise.
dbbackup.log
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive Apps file : /opt/CSCOpx/backup/manifest/upm/upminfo/datafiles.txt
[Tue Dec 8 08:56:54 2009] Archiving the contents of the following directories into /enbw/backup/files/cw_db_backup/0/upm/filebackup.tar
[Tue Dec 8 08:56:54 2009] /opt/CSCOpx/hum/conf/upm-snmp.properties
/opt/CSCOpx/hum/thresholdscript /opt/CSCOpx/MDC/tomcat/webapps/upm/reports
/opt/CSCOpx/MDC/tomcat/webapps/upm/WEB-INF/classes/com/cisco/nm/upm/properti
es/common/UPM.properties
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_657_658_-718594975:
No such file or directory
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_658_659_1465769167:
No such file or directory
/opt/CSCOpx/bin/tar: Error exit delayed from previous errors [Tue Dec 8 09:07:30 2009] ERROR(908): Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory. [Tue Dec 8 09:07:30 2009] Backup failed: 2009/12/08 09:07:40 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is seems to be problem related to maximal filesize handling of GNUtar implemented in CW2000.
The problem is with tar'ing HUM-Reports in /opt/CSCOpx/MDC/tomcat/webapps/upm/reports, and with reaching
tarfile-size of 2,9GByte error is thrown.
</exxx/backup/files/cw_db_backup/0/upm># ls -lh
total 6126448
-rw-r-----   1 casuser casusers    2.9G Dec 8 09:07 filebackup.tar
</exxx/backup/files/cw_db_backup/0/upm># ls -al
total 6126452
drwxr-x---   2 casuser casusers     512 Dec 7 14:30 .
drwxr-x--- 11 casuser casusers     512 Dec 7 14:30 ..
-rw-r-----   1 casuser casusers 3135201280 Dec 8 09:07 filebackup.tar
GNUtar-Version
# /opt/CSCOpx/bin/tar --version
tar (GNU tar) 1.13
Copyright (C) 1988, 92,93,94,95,96,97,98, 1999 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by John Gilmore and Jay Fenlason.
Is this a know problem?
Thanks for any thoughts.
Best Regards
Lothar

Hi Joe,
thanks for your feedback.
These files to be tarred aren't there directly after backup stops with error.
It seems that some process stores data about reports in that file and when trying to
pack these reports via tar they are delete by any cleanup method.
Does this help.
P.S. Backup usually takes about more than 1hour

Unable to locate the LMS's API Implementation-Error in Content Player

Dear Guys,
when I am playing the content in content player of Authering environment we get the following error "Unable to locate the LMS's API Implementation" ,
Should any API be implemented explicitly?
How can we resolve this error?
Regards,
Shamila.

Hi Shamila!
As I mentioned, you need to consult your content developer to debug this issue. In the course content(i.e. flash file) there are references to the SCORM API. These when imported in to AE loose the reference. For instance, if you have something like this .. parent.api.<some scrom function> and the parent (window or frame) has the SCORM API. This reference might be getting broken when the course package is imported in to AE. The content developer need to make changes in the code to ensure the reference to the API is changed.
Please let me know if you require further guidance on this.
Regards,
Ravi Sekhar

LMS 3.2 DFM error "URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!"

Hi Joseph,
one of our client is using lms 3.2 and getting the following error in DFM -> device import -> Auto Allocation mode configuration.
Error in getting instance of TreeGenerator class
com.cisco.nm.trx.kdm.utils.DcrGroupSelectorTreeGenerator
Root Cause:com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
I have gone through all documents available in netpro and done all tests mentioned for trouble shooting
following is the result of command " pearl resolver.pl "
D:\CSCOpx\bin>perl resolver.pl hyd-wbpo-cwks.wipro.com
Original name: hyd-wbpo-cwks.wipro.com
Hostnames/IP Addresses:
hyd-wbpo-cwks.wipro.com/10.120.232.143
Here with I have attched the dfmserver.log, dfmserver1.log, dfmOGSserver.log , netstat -a -n -o -b, and output of PDshow.
One thing I observed when I am running the command "brcontrol" under "D:\CSCOpx\objects\smarts\bin>" it is not returning me any output.
All the devices in dfm are stacked in learning state at 10%. The SNMP RO string used in DCR is alos ok.
Regards,
Satya

Hi any idea from anyone?

Imaq histograph error

I used IMAQ Histograph VI in this vi. The image source is set as a grayscale I16 image. When it is running on the machine it works OK, but when I run it on my own computer, it shows an image type error for IMAQ Histograph. I read the help file, the mask image must be U8 format, but why it is running OK in some case. Anyone knows?
Thanks a lot.
Jane

The machine I mentioned is we used in our lab which already been installed the computer and image acquisition system. It runs OK with that VI. But after I copied that VI to my own computer, an error showed up. The version of LabVIEW and NI Vision for these two computer is different. The computer on the machine has LabVIEW 8.6. My own computer has the latest NI Vision and LabVIEW2011. These are the only differences.

LMS E-Mail Notifications Errors Defination

Dears,
LMS send email notification to the customer (critical) as i customized
with error (authentication failure)
is there any sheet to know or identify what each error means ?
as i googled it and didnt find a solution
Thanks in advance

You can check following document which describes what alerts mean, which are raised by LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/Events.html#wp1078033
Also, LMS listens to some specific traps sent from device and process them to send some alerts.
For some SNMP traps, LMS either processes them or treats them as pass-through traps. These traps, and how LMS treats them, are described in these topics:
Processed SNMP Traps
When LMS receives certain SNMP traps, it analyzes the data found in the following fields of each SNMP trap message, and changes the property value of the object property if required:
•Enterprise (the sysObjectID of the agent or object)
•Generic Trap Identifier
•Specific Trap Identifier
•Variable-Bindings
•IP address of the SNMP agent
Pass-Through SNMP Unidentified Traps
Pass-through traps are the traps that are generated from devices and are not processed by LMS. The traps appear in the alerts and activities page, if they are generated from the devices that are managed by LMS. LMS cannot process these traps and map them to a topology element such as cards and interfaces. However, LMS can forward the traps irrespective of the device state is either managed or unmanaged. Forwarding these traps is controlled using Monitor > Fault Settings > SNMP Traps > Forwarding.
Pass-through traps are displayed as follows:
•As one of the following events:
–InformAlarm
–MinorAlarm
–MajorAlarm
•With the device type and the device name from which it was generated
Unidentified Traps
LMS may display an event as an Unidentified Trap. Normally an Unidentified Trap is reported when an event occurs on a device that is being discovered by LMS. To get more information on an Unidentified Trap see the corresponding Events page.
For more details check :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/TrapFwd.html#wp1007519
-Thanks
Vinod

LMS Staging Environment Flash Error

Recently at my company we experimented with using a flash video to launch a webhelp program in our LMS. We are getting the following error:
“The following application (flash file) is trying to communicate with this Internet-enabled location (LMS staging environment). To let this application communicate with the Internet click Settings."
The .swf launch is working sporadically for some IT users. Cyber Security has not had success launching it on any of their machines (which are more open than most) and have confirmed that it is not an issue on their end.
We are at a loss for what is causing the error. Any insight would be most appreciated.
- Meredith

Hi,
I had exactly same problem. When I contacted my DBA he provided me Secured URL with https for the site and when i used that URL it worked with out problem.
Badari.

LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.

Hi
LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
Can anyone help me out.
Regards
Laxmi

They are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
Please do following :
1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
Example :
community string = test123
IP = 10.1.1.1
snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
Admin > System > Software Center > Device Update
Also, check device identity under edit identity option from :
Inventory > Device Administration > Add / Import / Manage Devices
Check my screenshots for details :
Please check and share results.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Problems with LMS 2.6 backup (error 1226)

Hi.
I am tryinng to take a backup from LMS 2.6 in a Windows 2003 system. The backup appears to finish, and some files are generated in the backup directory, including one named filebackup.tar, wich seems to be the RME database backup, but the log file states an error: ERROR(1226): Database rmengdb backup failed. I can't find out what is causing this. I am taking this backup for migration purposes.
Thanks in advance.

Thank you for your reply.
Here goes the log for the latest backup attempt.
Backup to 'W:/backup_new2' started at: [Fri Jun 18 15:14:30 2010]
Archiving the contents of the following directories into W:/backup_new2\0\campus\filebackup.tar
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\DeviceDiscovery.properties
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\ANIServer.properties
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\discoverysnmp.conf
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\datacollectionsnmp.conf
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\Snmpv3EngineParam.txt
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\UTSnmpv3EngineParam.txt
W:/PROGRA~1/CSCOpx/campus/etc/cwsi/users
W:/PROGRA~1/CSCOpx/campus/etc/cwsi/archives
W:/PROGRA~1/CSCOpx/campus/etc/users
W:/PROGRA~1/CSCOpx/campus/etc/cwsi/ReportArchives
W:/PROGRA~1/CSCOpx/htdocs/campus/maps
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Archiving the contents of the following directories into W:/backup_new2\0\cmf\filebackup.tar
W:/PROGRA~1/CSCOpx/lib/classpath/com/cisco/nm/cmf/servlet\cwpass
W:/PROGRA~1/CSCOpx/lib/classpath\sso.properties
W:/PROGRA~1/CSCOpx/lib/classpath/com/cisco/nm/dcr\dcr.ini
W:/PROGRA~1/CSCOpx/MDC/Apache/conf/ssl
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security\secret.dat
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security/jaas\JaasConfig.xml
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security/jaas\JaasConfigModule
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/xms/psu/maps
W:/PROGRA~1/CSCOpx/objects/data/cmf/cmic/registered-templates
W:/PROGRA~1/CSCOpx/objects/data/cmf/cmic\cmic.xsd
W:/PROGRA~1/CSCOpx/conf\logstat.conf
W:/PROGRA~1/CSCOpx/etc/licenses
W:/PROGRA~1/CSCOpx/MDC/etc\regdaemon.xml
W:/PROGRA~1/CSCOpx/lib/classpath\comUser.dat
W:/PROGRA~1/CSCOpx/lib/classpath\ccoUser.dat
W:/PROGRA~1/CSCOpx/lib/classpath\proxy.properties
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Archiving the contents of the following directories into W:/backup_new2\0\dfm\filebackup.tar
W:/PROGRA~1/CSCOpx/objects/smarts/conf
W:/PROGRA~1/CSCOpx/objects/smarts/local/conf
W:/PROGRA~1/CSCOpx/objects/smarts/local/repos
W:/PROGRA~1/CSCOpx/objects/smarts/local/logs
W:/PROGRA~1/CSCOpx/setup\dfm.info
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Archiving the contents of the following directories into W:/backup_new2\0\rmeng\filebackup.tar
W:/PROGRA~1/CSCOpx/files/rme/jobs/swim
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/conf/swim/kb
W:/PROGRA~1/CSCOpx/files/rme/swim/advdistinput
W:/PROGRA~1/CSCOpx/files/rme/jobs/syslog
W:/PROGRA~1/CSCOpx/files/scripts/syslog
W:/PROGRA~1/CSCOpx/files/rme/syslog
W:/PROGRA~1/CSCOpx/files/rme/jobs/cda
W:/PROGRA~1/CSCOpx/files/rme/jobs/cctool/jobs
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/cctool/scase\SmartCase.properties
W:/PROGRA~1/CSCOpx/files/rme/jobs/bugtool/jobs
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/bugtool\Bugtool.properties
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/csc/data\Collector.properties
W:/PROGRA~1/CSCOpx/files/rme/cfgedit
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/config/cfgedit\ConfigEditor.properties
W:/PROGRA~1/CSCOpx/setup\rme.info
W:/PROGRA~1/CSCOpx/files/rme/repository
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/repository/common\repository.properties
W:/PROGRA~1/CSCOpx/files/rme/jobs/NetShow
W:/PROGRA~1/CSCOpx/files/rme/NetShow/ShowCommandArchive
W:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/archives
W:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/jobs
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/fcss/data\TimeZone.lst
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/util/logger\rmelog.cfg
W:/PROGRA~1/CSCOpx/files/rme/dcma
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchiveMgmt
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchivePoller
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchivePurge
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchiveUpdate
W:/PROGRA~1/CSCOpx/files/rme/jobs/cas
W:/PROGRA~1/CSCOpx/files/rme/changeaudit
W:/PROGRA~1/CSCOpx/files/scripts/changeaudit
W:/PROGRA~1/CSCOpx/files/rme/jobs/NetConfigJob
W:/PROGRA~1/CSCOpx/files/rme/jobs/cri/purgejobs
W:/PROGRA~1/CSCOpx/files/rme/cri/archives
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Backing up database aniDb:Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
(68183 of 68183 pages, 100% complete)
(2 of 2 pages, 100% complete)
Database backup completed
Command file created using Adaptive Server Anywhere Command File Hiding Utility.
Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Validation Utility Version 9.0.0.1383
No errors reported
Command file created using Adaptive Server Anywhere Command File Hiding Utility.
Backing up database rmengdb:Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Backup rmeng to W:/backup_new2\0\rmeng\database\rmeng.db failed. Retry backup database rmeng
Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Backup rmeng to W:/backup_new2\0\rmeng\database\rmeng.db failed second time.
ERROR(1226): Database rmengdb backup failed and . Check the log file for information.
Backup failed: 2010/06/18 20:25:28

LMS 3.2 Internal Error in Communication Channel

Hello,
I am having an issue with the DCR in which I get the error "Internal Error in Communication Channel" after trying to edit the credentials of a device.
It started when I tried to add a device to the DCR, with all credentials, and it wouldn't show up in the DCR. I tried this 3x, but no luck. I was eventually able to do so by using the Bulk Import, and having the single device (with all the credentials) in the .csv file.
Now that the device is in the DCR, I need to edit the User Defined Fields - but when I try to, I get the error mentioned above.
I've seen other threads here that talk about multi-server setups, and FQDNs, but I'm not using any of that. I've also noticed that there is a bug ID for it, CSCtd07131, but it says 'release-pending'.
Am I up the creek until an update comes out? (its not just user defined fields, btw, I'm unable to modify any credentials.)
Thanks

When you restart the ciscoworks processes you should always give a couple of minutes and log on when the cpu starts to come down.
If it continues to error when you add or modify you better open a case with the tac.
The bug you mention is only if you have multiple systems with a master and slave DCR
Cheers,
Michel

LMS 3.2 proxy error

Hi ,
I am having trouble updating LMS. Find attached the psu.log file.
My client insists that for *.cisco.com sites the authentication is none, but for all other sites it requires NTLM authentication.
Can you please give me a hint?
Regards,
Nicos Nicolaides

this sounds like you need the patch for BugId CSCto46927. It can be downloaded on CCO:
http://www.cisco.com/cisco/software/release.html?mdfid=282641053&flowid=5150&os=Windows&softwareid=280804892&release=3.3.0&rellifecycle=&relind=AVAILABLE&reltype=all
also consider to update to LMs 3.2.1
have a look at the readme
http://www.cisco.com/en/US/partner/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/SP1/Readme/Readme__LMS_3.2_SP1.html#wp155303
here is a link to download the service pack for LMS 3.2.1
http://www.cisco.com/cisco/software/release.html?mdfid=282635181&flowid=16561&softwareid=280775102&os=Windows&release=3.2.0&relind=AVAILABLE&rellifecycle=&reltype=latest

DFM Error after Upgrade from LMS 3.1 to LMS 3.2

Hi Cisco Community,
I have a big problem with the LMS Application Device Fault Manager 3.2.0 after an Upgrade from LMS 3.1 to LMS 3.2
The LMS upgrade finished without error.
The Alerts and Activities Diplay encountered an error with the following message:
"An exception occured.Please check the AAD.log file for further details"
You find the "pdshow" and "netstat" output and also the AAD.log, DeviceManagent.log, EPM.log, brstart.log and TISServer.log attached to this message
Everything else works fine.
A Cisco Daemon Manager restart doesn't fix this problem.
Any ideas to fix this problem?
Thanks for your help.
Best regards
Stephan B.

The output of the command "brcontrol" was:
Error attaching to broker: S25B2005:9002!
I found a workaround for this error message at the release notes for the Cisco Unified Operations Manager.
The workaround is:
1.) net stop crmdmgtd
2.) Wait 15 minutes
3.) net start crmdmgtd
After completion of this workaround, I got the following output:
Broker is located at: S25B2005:9002      Started: May 07 11:08:47 2010
Domain Host Name         Port     PID State   Last Change Time
DFM    S25B2005.drv.bb 21900   18060 RUNNING May 07 11:08:55 2010
DFM1   S25B2005.drv.bb 21903   13988 RUNNING May 07 11:08:55 2010
You find this outputs attached to this message.
Unfortunately the errors in the DFM application are the same as before.
Also I get some error messages in the "Polling and Threshold" menu.
You find this error message attached to this message.
I already execute the following steps from the Cisco TAC to solve this problem.....without success.
Stop Daemons >>> net stop crmdmgtd from CLI.
Open windows explorer and go to \CSCOpx\databases\dfmFh. Delete dfmFh.log.
Go to \CSCOpx\databases\dfmFh> from CLI and run:
dbsrv10.exe -f dfmFh.db from CLI.
Similarly open windows explorer and go to \CSCOpx\databases\dfmEpm. Delete dfmEpm.log.
dbsrv10.exe -f dfmEpm.db from CLI.
Similarly open windows explorer and go to \CSCOpx\databases\dfmInv. Delete dfmInv.log.
dbsrv10.exe -f dfmInv.db from CLI.
Note : Please check a screen will pop up each time you execute these commands.
Then, Start daemons >>> net start crmdmgtd from CLI.

LMS 4.1 Histograph error

Similar Messages

Maybe you are looking for