LMS 4.1 issue with collection summary board

Hello,
something strange, collection summary says 2 config archives failed but don't say succeeded, see below:
Thanks,

The other are probably "partial"
This probably means I did not get the vlan.dat file but got startup and running config.
You can see this in: Configuration > Configuration archive > Summary
I find the collection summary very confusing since it doesn't provide all info needed
Cheers,
Michel

Similar Messages

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

LMS 3.2 : issue with custom portal : high CPU

Hi,
Customer has a big issue with LMS.
When he connects to the standard portal, it works fine.
pdshow seems ok.
But when he wants to work with custom portal (portal.jpg), it makes a long time to display information and when he wants select something it hangs.
CPU is very high. He must stoped/restart LMS to have a normal CPU.
I asked him to :
- restart LMS, he made at 14h30
- CPU was ok and he worked with standard portal withou problems but when he tried to put debug for portal CPU increase at 15h30:
Common Services -> server -> Admin -> CS Log Configurations: debug on CiscoWorks Portal, CiscoWorks portlets and CS Home
Process which takes a lot of CPU is tomcat, you will find pdshow.txt, stdout.log and stderr.log.
He tries to go to the custom portal but it hangs, you will find logs from debug : CSHomePage.log and CSPortal.log
he sent me AAD.log because there was " high severity alert".
Many thanks for your help,
Elisabeth

The most obvious problem is that DfmBroker is down. Check to make sure tcp/9002 is not in user, then try a server reboot. See if the AAD problems go away (and perhaps the CPU problem will as well). If not, post the NMSROOT/objects/local/logs/broker.log.

Multiple Issues with the MSI board...

This is my first experience with the MSI board and so far its not very smooth... I have this MSI NEO 2 standard board My specs are
P4 2.8C
256 MB (single module) DDR 400 RAM. (TWIN MOS)
Geforce Ti4200..
80 GB Maxtor SATA
FAX
CD-ROM
WIth WINDOWS XP HOME Edition..
i have done no overclocking and the problems are..
1. First of all it takes lot of time to show the first screen... like the vga card screen comes after 4 seconds.
2. Some time i press the power button and when the system is detecting the hard disk and CDROM it gives error message like DRAM timings are too tight. i have check the BIOS setting and everything is normal and there is no overclocking and RAM is rated to run at 400 MHz.. although not a great brand but not a bad one either..
3. Sometime just before loading the operating system it gives an error message that No boot sector found.. insert a Bootable floppy or CDROM.. and when i restart it start going on as usual..
So wot are the causes of these problem .. i think mainboard is the main culprit... i have scanned my system with 2 anti virus and there is no virus..
any suggestions..?
Thanks..

Quote
Originally posted by Eddio1
I've been reading the posts here for about a week and I decided to finally ask for some assistance. Just picked up the MSI 865PE Neo2-V from BZBOYZ.COM and 1Gb generic matched Elixir 512's and I've tried dozens of bios settings as posted here. I was finally able to install 2003 ent. server and if I'm lucky, it will get past the 2003 splash screen to a login screen, I'll log in, then put it to work (you know browse some heavily populated folders) it freezes and a reset is necessary. Now, I cant even get past the splash screen. I must have booted 200 times with every bios combination and I'm tired of doing fresh installs and experiencing the same system freeze issues. I've been in the IT business and built dozens of boxes in the past and never had such problems (using bios failsafe defaults no less!) getting an OS to install and run in a reasonably stable fashion. Mobos these days are extremely frustrating! I'm going to pick up some Corsair twinx RAM and hopefully this will resolve. Any ideas would be greatly appreciated in advance of more waiting and RMAing the RAM I have for some Corsair. Do you think I'm on the right track because I'm gonna be really pissed if new RAM doesn't do the trick.
Bios settings:
Bus mastering enabled
Configured RAM manually in bios 3-4-4-7-8 (tried PSD to no avail)
Disabled dynamic o/c
Disabled spread spectrum
Normal speed
HT enabled
All other settings bios setup defaults
MoBO specs:
MSI 865PE Neo2-V latest bios: Version 5.4 Update date 2004-7-5
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=612
P4 3.2 Prescott
400 FSB
1Gb Elixir PC3200 RAM (I suspect this cheap RAM is the issue)
Memtest says it runs at 3-3-3-8
I configured it manually in bios (per some previous posts) to run 3-4-4-7 (only way to get a boot)
Native for SATA/ATA
PS-Enermax EG365P-VE FCA-3.3V-32A, +5-32A, +12-26A
ATI Radeon 8500 64MB
Seagate SCSI Cheetah-36Gb 15K 160Mb/s
Seagate SCSI Barracuda-73Gb 10K 160Mb/s
Adaptec 29160N
Boot to Adaptec then floppy then CD
HI check my previous thread, entitled problem after udate of xp, or look for threads with name on Sounds like a similar problem.

Time Machine Issue with new system board.

OK MAC Fans here is an issue that I discovered with Time Machine (TM).
First I have a 17” MacBookPro that has two 1TB external HDs and a 30” monitor attached to it.
Something happened to my system and the system board had to be replaced.
The Mac was sent to TX and a new system board was put in it and the very latest OS (10.5.2) was installed on the hard drive.
The Apple store added my profile so you think everything would be good?
Wrong!
None of my applications made it through.
But I was thinking let just use Time Machine to restore them. WRONG in a way.
The first thing I did when I got home was set up TM. I pointed TM to the external HD that has all of the previous backup files and TM wanted to backup the system. During the backup I notice that TM created a new directory for the backup files.
The name of the directory was the name of my MAC. The old directory was also the name of my MAC but with the new OS software release it was stated that you could not use any special characters when naming your MAC or TM may not recognize your backup files (there is a note on this under support).
The new name is FirstnameLastnameMacBookPro17 the old name was Firstname Lastname’s MacBookPro 17”. TM created a new directory named FirstnameLastnameMacBookPro17 and this was the only files that are visible in TM.
I deleted the new directory and renamed my MAC back to the old name and TM created a NEW directory with the old name. Now there were 2 directories with the same “old” name. I can not get TM to use the old directory and display the old backup files.
I was able to drag and drop the files and applications I needed from the previous backup folders back to where I needed them to be so all is not lost but I can not restore files from TM.
Also I renamed my MAC back to FirstnameLastnameMacBookPro17 and TM automatically changed the name of the new directory to the new name.
I tried to drag old backup folders from the old TM directory to the new TM directory but received an error that the files can not be modified.
The only thing that I can think is that when the system board was replaced TM got confused and did not recognize it as the same system. So now I am starting my backup history all over again. The old backup files are good, the only thing is that I have to drag and drop items I want from those folders to the location I want. I can not use the old backup files in TM.
Dose any one have a magic pill (red or blue) I can take to make the old files visible in TM?

I decided not to worry about the syncing my TM. I was just at the Apple store and they have decided to replace my MacBookPro. I am going to start my backups on the new system all over again. I know I can drag and drop files that I want from the old files to the new system if I want and that will be go enough.

BPM: Issue with Collect Idocs in Production which is used to work in Test.

Hi,
We are using BPM for our interface to collect the idocs,
- Header Idoc will consists of number of bundles of Detail idocs.
- Each bundle consists of 100 Details Idocs..
We used packet size as 100 in ECC partner profile and Idoc package as 100 in Sender Idoc adapter in PI.
Example for 103 idocs,
header idoc will send count as 2 (100 and 3).
Detail Idocs will come in two 2 bundles(2 message ids), with 100 in one message id and 3 in another message id.
we used BPM to collect all the detail idocs before mapping to final target message.
The interface is working fine in our test system, but it is not working in production.
The interface is working fine for the idocs less than 100. Problem is only when the count is more than 100.
We compared BPM in both test and production and we didn't find any difference in the process steps.
Anyone has any idea what might be wrong ?
Any help will be appreciated.
Thanks
Deepthi.

Mapping problem which is cleared now.

BPM Issue With Collection

Hi All,
I have designed a CollectTime dependand BPM Pattern (IDOC's_to_File) similar to Standard CollectPatternTimeDependant.The problem is when
TimeOut = 2 Min
Incoming are four IDOC's which are sent in >1min to XI,then the BPM gets trigerred 4 times, For the first time it collects 4 IDOC's, 2nd time It Collects 3 IDOC's starting from 2nd IDOC , and so on...
I Hope there is a Problem with the Loop, However it is set to 1=1.
I unable to figure out my mistake.Any Light on this would really be appreciated.

Hi,
Check out the exception timeout and the time you have given and the process in exception you handled..
with this blog we can get desired output..
we can collect Idocs without BPM also
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm - collecting IDocs without BPM
Regards
Chilla
<i>reward points if it is helpfull..</i>

Prime Infrastructure issues with collection, dscp, mos, etc

We have a virtual Prime Infrastructure appliance installed. It currently shows collection status managed with warnings for several devices, i.e. Nexus 7k's, cat 3750x. cat 3850x. It is not all stacks though, most are collected accurately only a few are not showing up.
All four of my Nexus 7k's are not collected accurately.
Also when I goto Detail/Voice-video dashboards, I do not get any MOS, DSCP, voice call, IPSLA stats etc etc
Just for clarification we use Microsoft Lync for communications with Polycom phones using dscp 46, so perhaps it is not even possible but I wouod think Prime would be polling off of traffic on the port and look for DSCP values.
I am able to poll IPSLA and mos scores via PRTG.
on many of my ports in Detail Dashboards/Interface "polling enabled" shows as "no" I am not sure why it shows up as no but there is some date being polled.
Is there something simple I am missing? TAC does not seem to know the product and I am unable to find a decent manual. So I am at a loss.
Thanks in advance!

Bump

Overclocking issue with X99S SLI board

I just put together my system with an X99S SLI Plus MB, and i7 5820K CPU.
If I use the OC Genie, it will clock my CPU at 3.8Ghz (38x100).
However, If I turn off the Genie and trying manual overclocking, it will not allow me to modify the CPU ratio, locking it at 3.3Ghx (33x100).
It says that the multiplier can only be modified with a CPU that allows it.
I have a "K" processor, and OC Genie changes the CPU ratio when active, so I am not sure why I cannot change it manually.
Am I missing something?
System Specs:
X99S SLI Plus MB
Core i7 5820K CPU
Kingston Hyper-X DDR4, 2666

The BIOS version is: E7885IMS V1.7(170)
Here are some shots with OC Genie, and without:

Graphics issues with MacBook Pro 15-inch Late 2011 model

I have a MB Pro 15-inch late 2011 (2.4GHz Core i7) and recently I started to get random screen glitches while working on photoshop and illustrator and then eventually the screen went totally blank and so I paid to have the graphics chip replaced (as I was out of warranty).
After 2 weeks, the same glitches have started again so I did some internet research and discovered that that there are thousands of other people around the world who had similar issues in this particular model range that uses the AMD Graphics chipset (Radeon HD 6770M) combined with the Intel HD Graphics 3000 on the same motherboard.
Does anyone know if Apple has announced a recall / replacement programme for this model as it appears to be a widespread issue ?
Thanks
Rohit

There is an online campaign at change.org which has crossed 10,000 signatories (or is about to) that should prove that there is an issue.
From my analysis, the problem is the AMC Radeon GPU that is the problem - there is some compatibility issue with the logic board. I just paid to get the problem solved, but it has come back again in less than a a week. I installed gfcCardStatus to control which graphics chips are being used and found that when the Intel HD chipset is used, there is no issue, but when it switches to the AMD chipset, the problem returns.
There is certainly an issue and it's widespread and I am sure that this will come back to bite apple in the ***...
I think their issue is probably that the fault lies in AMD's chips and not their circuitry which is probably why they don't want to bear the cost of a recall program unless AMD contribute to the costs...which they won't because Apple have pretty much stopped using AMD GPUs and use nVidia instead now.
Anyway, I'm going to go back to the repair folks and have them re-fix the issue as it's covered by their warranty. Let me know if you have any more luck on your end.

Strange Issue with Qmaster ctrlr...

Today i replaced my talon zl4 with a qmaster controller so that i can install windows 64 bit on my pc (the talon doesnt support 64 bit os). When i stick the card in and hook up the drives, it shows the standard card bios text right after post, but it doesnt give me any option to configure the device or show any drives detected. I took the card out and tried it in an older machine, and it shows the raptors and tells me i can hit 'q' to configure the array. The only variable between the 2 machines is the mainboard, cpu, and ram used. Everything else was kept constant. Keep in mind that the talon card from the same company (pacific digital) worked fine.
PC1 (card broken in this one): MSI K8N Neo4 SLI Platinum | AMD 64 3200+ | 2 gig ram | BFG Geforce 7800 GTX | QMaster (no other expansion cards installed)
PC2 (card works in this one): MSI KT3 Ultra 2 | AMD 1700+ | 512 meg ram | some crappy pci video card | QMaster (no other expansion cards installed)
Since it worked in PC2 im led to believe that its an issue with the k8n board im using. I updated the mainboard bios to the newest version, and updated the QMaster's bios to the newest version. I also disabled all onboard sata/pata/Nvraid controllers. No effect.
Im at a loss here... anyone have an idea?

ok here goes... i figured out whats going on, now msi needs to fix it. When i removed the 7800gtx and told the bios to initialize the pci video first, the qmaster card worked fine on my k8n. It also works with the 7800 gtx and the crappy pci card at the same time, only problem is i lose a pci slot, and i have to move the monitor cable after windows comes up to the 7800 gtx, or use 2 monitors. This is pretty freakin rediculous...

LMS 4.2 Topology Data Collection Issue

Hi there,
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
Topology Data Collection    193    0    Not Available     Running    Schedule
Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
Thanks for help.

Hi,
i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
Everything is set to 0:
Topology Data Collection      0 0 Not Available                          Running Schedule
UT Major Acquisition            0 (0 End hosts 0 IP Phones) 0      Not Available Idle Schedule
VRF Collection                    0 0                                              Not Available Idle Schedule
But Topology Data Collection is still frozen to "Running" state....

LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

Hello,
We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
- WS-C6505E-SUP2T
- WS-X6824-SFP-2T
There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
Do you have this issue as well ? Any direction or help ?
I am afraid of a potential bug...
Rgds,
Yoann

When you were placing the internal test calls, where was your phone located? The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A? Are these working fine? If not, then it's likely you do have a QoS issue over the WAN to Site A.
Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
Kind regards,
Craig

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Issues with internet connection. Logic board?

I have a 17" MacBook Pro (Late 2008) 2.5 GHz Intel Core 2 Duo, serial ...GV3R9. More often than not my internet gets disconnected. The Wi-Fi icon indicates it is ON, but there is no connection at all. Then if I manually turn OFF the Wi-Fi, it won't turn back ON again until I restart my computer, sometimes more than once until the internet connection is active again. I could not identify a pattern of when the Wi-Fi turns OFF. I suspect something could be wrong with the Logic Board, but I don't know how to diagnose it. Any ideas?

Does this WIFI issue happen everywhere (other networks outside your home) or is it limited to your home WIFI network? If it's just your home, then the problem is with your home router. If the problem is everywhere, then it's suggested that you back up all your personal data and then erase and reload the OS on the laptop first and retest the wireless capabilities before loading anything back on it. If it works fine, then it was just a borked OS load. Restore your stuff and go from there. If it behaves the same way, then it could be hardware related, but it's probably just the WIFI card on it and not the entire logic board.

LMS 4.1 issue with collection summary board

Similar Messages

Maybe you are looking for