LMS 4.1 user tracking does not pull ip address from hosts on switches

New install discovered router and switches at same location with no issues. However when running an acquisition on those switches most fields are populated except the ip address of end host associated with port. Mac address, port speed, etc. but no ip address info on per port basis. Any ideas, using snmp v3 if that makes a difference.
Sent from Cisco Technical Support iPad App

Thanks for this. This really clarified things in my head. I didn't realize that you were not seeing MACs in UT. This is a new feature of LMS 4.1. UT will show those ports that are up/up even if the MAC address cannot be determined. The reason the MAC address cannot be determined is that your switch code is too old. You need 12.2(25)SEE or higher to support SNMPv3 contexts necessary to poll MAC addresses. If you upgrade, then configure the following for each VLAN context (seen in "show snmp context") then you should see those MACs (then IPs):
snmp-server group v3group v3 context vlan-10

Similar Messages

CK11n Costing Run does not pull purchasing price from info record.

Hi,
I have material which is a semi finished product (Material type: SEMI) and is purchased from a fixed vendor (specified in the source list).
The costing run does not pick up the purchasing price from the purchasing info record but
instead incorrectly picks up the standard price from the material master (Costing 2 view).
Can you please help me solve this issue?
Thanks,
Ketan

Execute OPL1
or
SPRo>>IMG>>Controlling>>Product Cost Controlling>>Cost Object Controlling>>Product Cost by Order>>manufacturing Order>>Check Costing Variants for Manufacturing Orders (PP)
Select the costing variant in the table from "Change Costing Variant: Overview" Overview Screen
Click Detail Button
Click Valuation Variant Button in the Control Tab
Change View Valaution Variant Detail Screen Appears
In Material Valuation Tab Set Price from Purchase Inforecord as Priority 1 if you want to use Price from Purchase Inforecord for semi-finished product during CK11N
You can list down Priority 2 to 5 depending on your requirement
This would solve your problem
Edited by: Paul Pandian on Mar 17, 2009 3:01 AM

ProxySelector does not pull proxy settings from configuration file?

Hi everyone,
I try to use class ProxySelector to find proxy settings on Windows XP. When a proxy server URL and port is set explicitly in the "Internet Options" control panel, this proxy setting is detected by class ProxySelector - no problem.
When a proxy configuration file is set in the control panel, class ProxySelector returns no proxy setting (i.e. DIRECT) - PROBLEM
(yes, the configuration file works otherwise, i.e. the proxy is pulled when using Firefox or Internet Explorer
and yes, the proxy works too, i.e. when using the proxy url and port directly, HTTP can be used in Java too).
Does anyone have a hint on how to find out the proxy server url and port to use for HTTP out of Java, when the proxy is set through a configuration file as described above?
Thanks a lot for any help
Ulrich

Hi again,
I found a solution in the mean time: ProxySelector does return the local "browser settings" for a proxy server (i.e. proxy type and address) when an application is started with Java Web Start. When started with Java Web Start, a correct proxy type and address is also returned, when a ".pac" file is set in the browser settings.
So, when an application needs to determine a proxy configuration, although it might be started locally one needs to create a JNLP file and launch respective application (locally) using Java Web Start.
Ulrich

LMS 4.2 User Tracking not enabled

Hi all,
I have an issue on some switches located on remote sites.
For all switches on the main site (where LMS is located) User tracking is enabled.
For switches on the remote sites, user tracking seems not to be enabled.
This means we can't run the reclaim ports reports on them.
Discovery, Fault Discovery and Inventory are enabled,
but User tracking and Data collection are not active on these remote swithes.
How can this feature be enabled? Can't seem to find it.
Thx in advance!

Hi ,
you need not to do anything on the switch..
You need to check if for those devices "Data collection " is running fine or not
I hope the device is managed in LMS , check the device here first "Admin > Collection Settings > User Tracking > Acquisition Action"
If the device is missing then delete it and re-add in LMS and run the Data collection followed by user tracking acquisition.
Are you using SNMPv2 or SNMPv3 on those devices ?
Thanks-
Afroz

LMS 4.2 user tracking

Hello,
I have a problem with LMS 4.2 user tracking.
When I generate a report on all my network all mac address are ok but there is no Hostname/Ip address in the result, except for 2 equipments.
the only difference between these 2 equipements and the rest of the network is that they are connected on a not routed vlan. All the other phones, computers are connected on a routed vlan.
I have a Nexus 5k as core and 2960 as access. Routing between vlans is done with the Nexus
My DNS server is ok and reachable
Here is a screenshot of the report attached.
Thanks for your help

Yes, the Nexus 5000 series has a few issues with LMS (and other things). Among them is the non-support of User Tracking. I'm told it's a MIB variable issue but it's been the case for some time now and remains so with the current LMS release.
Here is the reference from the Supported Devices Table which states in part:
The following features are not supported:
User Tracking (Nexus 1K, 4K, 5K and 7K with FEX), VLAN Management, VRF Lite, LANE Management
Configuration Deploy Protocols: HTTPS, SCP, SSH, RCP
Configuration Fetch Protocols: HTTPS, SCP, SSH, RCP
Software Distribution by: Advanced flow, Image, Remote Staging
Software Repository Synchronization
CiscoView - [1.3.6.1.4.1.9.12.3.1.3.840, 1.3.6.1.4.1.9.12.3.1.3.903, 1.3.6.1.4.1.9.12.3.1.3.907, 1.3.6.1.4.1.9.12.3.1.3.930]

User POV does not pop up from Report in task list

Hello,
I've created a report within Related Content in HFM and added it to a task list--the problem I'm experiencing is when I run the report the User POV does not pop up, rather it simply uses the default POV (ie, whatever is set up in data grids or process management)--this happens if I try to run it directly from Related Content or from the task list. My preferences within Financial Reporting have already been updated to 'On' to preview the User POV and if I run the report from Financial Reporting (ie, Explore) the User POV works fine--so, it seems like adding a report to Related Content disables the User POV from popping up. I'm running on Financial Reporting v11.1.2.1 and HFM v11.1.2.1.104.3701. I can't find anything about it within this forum, knowledge base or as a known issue in the ReadMe for the .104 patch set for HFM.
Can anybody fill me in on if this is functionality by design or a defect?
Best regards,
Jason Call

Financial Reports do not work as you might expect when they are used as a related content item. As you already have realized, you will not be able to adjust the FR POV items from inside of HFM.
A 'work around' would be to link to the report and put that link in the Tasklist. This will then open the report 'normally' and you will get the POV functionality that you expect.
To find the link to a report, open the report's properties and look at the 'smartcut' value. (That is a URL directly to the report)

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

User "Administrator" does not exist

Hello everybody,
i implemented SP Stack 13 in our Java Instance! Now we got some Problems in our Portal.
1) Selfgenerated IViews cannot be accessed. We got the a Portal runtimeerror. In the Tracefile we found the following message:
#1.5 #0011258C7044006100000253000003EC0004418B74EB8814#1197967124597#com.sap.portal.sapapplication#sap.com/irj#com.sap.portal.sapapplication#TESTUSER1#36624##srv053_BWT_18713950#Guest#95ba2ce0ad4411dcbf910011258c7044#SAPEngine_Application_Thread[impl:3]_38##0#0#Error#1#/System/Server#Java###Content pass of Application Integrator failed.
Component Name:       'com.sap.portal.appintegrator.sap.BWReport',
Context Name (iView): 'pcd:portal_content/every_user/general/ARB/ARB-FI/AR_FI_Role/ARB_QM_REP_0/AR_FI_SY_WEB_KONZUMS_RW_S',
Top Layer:            'BWReport/TopLayer',
Producer ID (FPN):    'null',
System Alias:         'BWTCLNT001',
[EXCEPTION]
#1#com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to parse template '<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>'; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
     at com.sapportals.portal.appintegrator.layer.AbstractIntegrationLayer.processTemplate(AbstractIntegrationLayer.java:455)
     at com.sapportals.portal.appintegrator.layer.URLTemplateProcessLayer.processLayer(URLTemplateProcessLayer.java:33)
     at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:159)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doActionPass(AbstractIntegratorComponent.java:68)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:54)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:396)
     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
     at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java:799)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.appintegrator.template_processor.TemplateParserException: Unable to parse template '<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>'; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processWholeTagExpression(TemplateProcessor.java:167)
     at com.sapportals.portal.appintegrator.template_processor.compiler.TemplateCompiler.processWholeTagExpression(TemplateCompiler.java:54)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseSimpleExpression(TemplateParser.java:234)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpression(TemplateParser.java:188)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpressionEx(TemplateParser.java:210)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpression(TemplateParser.java:193)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseTagExpression(TemplateParser.java:170)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseTemplateExpressionPart(TemplateParser.java:97)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parse(TemplateParser.java:89)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parse(TemplateParser.java:83)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processImpl(TemplateProcessor.java:407)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:374)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:386)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:54)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:107)
     at com.sapportals.portal.appintegrator.layer.AbstractIntegrationLayer.processTemplate(AbstractIntegrationLayer.java:441)
     ... 30 more
Caused by: java.lang.ClassCastException
     at com.sap.portal.fpn.runtime.services.AppIntegratorInformationService.getProducerByAlias(AppIntegratorInformationService.java:126)
     at com.sap.portal.fpn.runtime.services.AppIntegratorInformationService.buildFPNLocatorForShortcut(AppIntegratorInformationService.java:142)
     at com.sap.portal.fpn.runtime.services.AppIntegratorInformationService.transformURL(AppIntegratorInformationService.java:204)
     at com.sapportals.portal.appintegrator.template_processor.context.FPNWrapper.getTerminal(FPNWrapper.java:69)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processWholeTagExpression(TemplateProcessor.java:152)
     ... 45 more
#1.5 #0011258C7044006100000255000003EC0004418B74EC9CB6#1197967124690#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#TESTUSER1#36624##srv053_BWT_18713950#Guest#95ba2ce0ad4411dcbf910011258c7044#SAPEngine_Application_Thread[impl:3]_38##0#0#Error#1#/System/Server#Java###Exception ID:09:38_18/12/07_0005_18713950
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/every_user/general/ARB/ARB-FI/AR_FI_Role/ARB_QM_REP_0/AR_FI_SY_WEB_KONZUMS_RW_S
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : TESTUSER1
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>&\#39;; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 29 more
#1.5 #0011258C7044006100000257000003EC0004418B74EEE9EF#1197967124894#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#TESTUSER1#36624##srv053_BWT_18713950#Guest#95ba2ce0ad4411dcbf910011258c7044#SAPEngine_Application_Thread[impl:3]_38##0#0#Error##Java###09:38_18/12/07_0005_18713950
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>&\#39;; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
2) In the Trace file all the Time occurs the following message:
#1.5 #0011258C7044006F0000027A000003EC0004418B678FE974#1197966900571#com.sap.workflow#sap.com/irj#com.sap.workflow#J2EE_GUEST#0####8f2fa3e0aa4d11dcb0150011258c7044#Thread[ThreadPool.Worker4,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/Applications/Workflow/General#Plain###TaskSchedulerDeadline.run()#
#1.5 #0011258C7044006F0000027B000003EC0004418B678FEBD8#1197966900571#com.sap.workflow#sap.com/irj#com.sap.workflow.#J2EE_GUEST#0####8f2fa3e0aa4d11dcb0150011258c7044#Thread[ThreadPool.Worker4,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###com.sap.security.api.NoSuchUserException: User "Administrator" does not exist.
     at com.sap.security.core.imp.UserFactory.getUserByUniqueName(UserFactory.java:1635)
     at com.sap.security.core.imp.UserFactory.getUserByUniqueName(UserFactory.java:1574)
     at com.sap.security.core.imp.UserFactory.getUserByUniqueName(UserFactory.java:1560)
     at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:90)
     at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
     at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
     at java.lang.Thread.run(Thread.java:534)
Can somebody tell me what is going on here?
Thanks so long
Edited by: Oliver Heinzelmann on Jan 11, 2008 2:17 PM
Problem #1 resolved: Ask me for solution

Hi Oliver,
A contact at SAP has indicated that in the KM Task Scheduler Deadline (com.sap.workflow.es.scheduler.TaskScheduler.Deadline.run) that the user "Administrator" is hard coded in the SPS13 release.
Depending on what you are using the KM for you could reduce the frequency of the alert by changing the scheduling of this task which by default is every five minutes.
Although the release notes of the following patches didn't formerly address the hard coding issue, I decided to apply them anyway as I thought that a later release may have fixed the issue. However it is not fixed with these interim patches.
KMCBC13P_1-10003491.SCA   Patch for KMC BASE COMPONENTS 7.00 SP13
KMCCM13P_1-10003492.SCA   Patch for KMC CONTENT MANAGEMENT 7.00 SP13
I guess we will need to wait for a further patch to be released and ignore the error in the meantime.
Regards
Craig

JSPM phase error : admin/user/SID does not exist

Hi ,
There is an error message while opening the JSPM
Phase error report:
"cannot read secure store properties .could not set up secure store.property admin/user/SID does not exist.msg.util.dyn.0003.com.sap.security.core.server.secstore.secstoreFS get string value
com.sap.security.core.server.secstore.secstoreFS.Not found exception could not find a record key "admin/user/SID" in the store com.sap.security.core.server.secstore.secstorefs"
checked the config tool secure store and found no entry maintained for /admin/user/SID.
How to add the new entry in config tool and what is post entry procedure
Thanks a ton

Hello Daniel,
You can maintain the Administrator user in secure storage using the config tool.
By default, the value for this config tool property is user Administrator. However, when using the ABAP Engine for persistency, this user is J2EE_ADMIN.
Following are the steps:
       1.      Start the Config Tool.
       2.      Select secure store.
                The configuration for the secure storage in the file system appears.
       3.      Select the key admin/user/<SID>.
       4.      Enter J2EE_ADMIN in the Value: field and choose Add.
       5.      Select the key admin/password/<SID>.
       6.      Enter the password for J2EE_ADMIN in the Value: field and choose Add.
       7.      Save the configuration.
The corresponding link is mentioned below:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/b7ceff3e40fd42be3a6503236f9746/content.htm

User xyz does not exist/not attached in this period

_we checked InfoType 0105, SubType 0001 the value was correct,date range covering the period of validity also not expire.
so any one suggest solution for this issue ?_
User xyz does not exist/not attached in this period.
[EXCEPTION]
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User xyz does not exist/not attached in this period.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
at com.sap.pcuigp.xssutils.pernr.EmployeeGroupInfo.init(EmployeeGroupInfo.java:140)
at com.sap.pcuigp.xssutils.pernr.wdp.InternalEmployeeGroupInfo.init(InternalEmployeeGroupInfo.java:183)
at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:270)
at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:226)
at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:273)
at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:198)
at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:258)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
at com.sap.xss.essceservices.vcceassignmentselection.VcCEAssignmentSelection.onInit(VcCEAssignmentSelection.java:235)
at com.sap.xss.essceservices.vcceassignmentselection.wdp.InternalVcCEAssignmentSelection.onInit(InternalVcCEAssignmentSelection.java:174)
at com.sap.xss.essceservices.vcceassignmentselection.VcCEAssignmentSelectionInterface.onInit(VcCEAssignmentSelectionInterface.java:162)
at com.sap.xss.essceservices.vcceassignmentselection.wdp.InternalVcCEAssignmentSelectionInterface.onInit(InternalVcCEAssignmentSelectionInterface.java:144)
at com.sap.xss.essceservices.vcceassignmentselection.wdp.InternalVcCEAssignmentSelectionInterface$External.onInit(InternalVcCEAssignmentSelectionInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
at com.sap.portal.pb.PageBuilder.wdDoApplicationStateChange(PageBuilder.java:303)
at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoApplicationStateChange(InternalPageBuilder.java:197)
at sun.reflect.GeneratedMethodAccessor5506.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doApplicationStateChange(DelegatingComponent.java:139)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doApplicationStateChange(ClientComponent.java:667)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doApplicationStateChange(ClientApplication.java:537)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:120)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
ras

Hi,
In transaction HRUSER check if the user XYZ has been attributed to a valid pernr and if the user is valid in period.
regards,
Fabio Louzada Saito

User SYSTEM does not exist

Hi there,
Using the MDK:
-I have set up my publication items
-added them to my publication
-used the packaging wizard to setup my application and attach it to the publication
-used the Oracle Mobile administrator to create a user.
-used the Oracle Mobile administrator to assign the user to the application.
On Win32, I download the WIN32 Setup and run it with the user and password.
It sets up the DMAgent, etc, and installs all of the oracle lite stuff into c:\mobileclient
Next, I run MSYNC.EXE with the user's name. It completes successfully. What happens next is very strange:
C:\Documents and Settings\allen>msql system/moogle@polite:tenchi_pman
Oracle Lite MSQL Version 10.3.0.1.0
Copyright (c) 1997, 2007, Oracle. All rights reserved.
[POL-5246] user SYSTEM does not exist
C:\Documents and Settings\allen>
Has anyone encountered this?
Thanks,
Allen
p.s. my environment details are as follows:
Mobile Repository Configuration
Operating System: Linux 2.6
Oracle Database: 10.2.0.3.0
Mobile Server Configuration (all the latest patches applied at this time)
Mobile Server Install Type: Standalone
Operating System: Microsoft Windows XP
Mobile Server: 10.3.0.1.0
Secure Socket Layer: No
Part of Web Farm: No
Java J2SE: 1.5.0_15
Mobile Client Configuration
Mobile Client Type: Windows 32
Operating System: Microsoft Windows XP SP2
Mobile Client: 10.3.0.1.0

Is there a way for me to create the SYSTEM user in the Oracle Lite database, or is this error a symptom of a different problem?
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.CAT (TABLE_NAME, TABLE_TYPE) AS SELECT TABLE_NAME, TABLE_TYPE FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONSTRAINTS (OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED) AS SELECT OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED FROM SYSTEM.POL__CONS
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONS_COLUMNS ( OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION) AS SELECT OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION FROM SYSTEM.POL__COLUSAGE
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.TABLE_PRIVILEGES ( OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 0
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.COLUMN_PRIVILEGES ( OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 5
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_VIEWS ( OWNER, VIEW_NAME, TEXT_LENGTH, TEXT) AS SELECT TABLE_SCH, TABLE_NAME, VIEW_LEN, VIEW_TEXT FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TABLES ( OWNER, TABLE_NAME, TABLESPACE_NAME, CLUSTER_NAME, PCT_FREE, PCT_USED, INI_TRANS, MAX_TRANS, INITIAL_EXTENT, NEXT_EXTENT, MIN_EXTENTS, MAX_EXTENTS, PCT_INCREASE, BACKED_UP, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, CHAIN_CNT, AVG_ROW_LEN) AS SELECT TABLE_SCH, TABLE_NAME, CAST('OOT' AS VARCHAR(128)), CAST(NULL AS VARCHAR(128)), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS VARCHAR(1)), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE, IS_HIDDEN) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -16 THEN 'NCLOB' WHEN -15 THEN 'CLOB' WHEN -14 THEN 'BLOB' WHEN -13 THEN CAST('LONG' AS VARCHAR(30)) WHEN -12 THEN 'NUMBER' WHEN -11 THEN 'ROWID' WHEN -10 THEN 'LONG RAW' WHEN -9 THEN 'RAW' WHEN -8 THEN 'TINYINT' WHEN -7 THEN 'LONG VARBINARY' WHEN -6 THEN 'VARBINARY' WHEN -5 THEN 'BINARY' WHEN -4 THEN 'BIGINT' WHEN -3 THEN 'LONG VARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN CASE SUBTYPE_CODE WHEN 1 THEN CAST('DATE' AS VARCHAR(9)) WHEN 2 THEN 'TIME' WHEN 4 THEN 'TIMESTAMP' ELSE 'EMPTY' END WHEN 10 THEN 'INTERVAL' WHEN 12 THEN 'VARCHAR' WHEN 13 THEN 'VARCHAR2' WHEN 14 THEN 'BIT' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE <> 9 THEN COL_PRECISION WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 1 THEN 8 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 2 THEN 6 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 4 THEN 15 ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-16, -15, -14, -13, -11, -10, -9, -7, -6, -5, -3, 1, 9, 12, 13) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (-12, 2, 3, 4, 5, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS INTEGER) ELSE DEFAULT_LENGTH END, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS VARCHAR(4096)) ELSE DATA_DEFAULT END, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CASE ISHIDDEN WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.USER_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_ID, OBJECT_TYPE, CREATED, LAST_DDL_TIME, CREATED_TIME, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, OBJECT_ID, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST(CREATED AS DATE), CAST(CAST(CREATED AS TIMESTAMP(0)) AS VARCHAR(128)), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ WHERE OBJECT_NAME NOT LIKE 'POL_%' AND SCHEMA_NAME IN (SELECT NAME FROM POL__SCHEMATA WHERE OWNER = USER)
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_USERS ( USERNAME, USER_ID, CREATED) AS SELECT USERNAME, USER_ID, CREATED FROM SYSTEM.POL__USERS
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_TYPE, CREATED, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ACCESSIBLE_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -4 THEN CAST('BIGINT' AS VARCHAR(128)) WHEN -3 THEN 'LONGVARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN 'DATETIME' WHEN 10 THEN 'INTERVAL' WHEN 11 THEN 'VARCHAR' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (2, 3, 4, 5, 9, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_INDEXES ( OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, TABLE_TYPE, UNIQUENESS) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, CAST('TABLE' AS VARCHAR(10)), IS_UNIQUE FROM SYSTEM.POL__INDICES
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_IND_COLUMNS ( INDEX_OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, COLUMN_NAME, COLUMN_POSITION) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, COLUMN_NAME, INDEX_POSITION FROM SYSTEM.POL__INDICESDT
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_COL_COMMENTS ( OWNER, TABLE_NAME, COLUMN_NAME, COMMENTS) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, COLUMN_COMMENT FROM SYSTEM."okAttr" WHERE COLUMN_COMMENT IS NOT NULL
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COMMENTS ( OWNER, TABLE_NAME, TABLE_TYPE, COMMENTS) AS SELECT TABLE_SCH, TABLE_NAME, TABLE_TYPE, TABLE_COMMENT FROM SYSTEM."okClass" WHERE TABLE_COMMENT IS NOT NULL
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SYNONYMS ( OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, DB_LINK) AS SELECT OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, CAST('NULL' AS VARCHAR(128)) FROM SYSTEM.POL__SYNONYM
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SEQUENCES ( SEQUENCE_OWNER, SEQUENCE_NAME, MIN_VALUE, MAX_VALUE, INCREMENT_BY) AS SELECT SCHEMA_NAME, SEQ_NAME, MIN_VALUE, MAX_VALUE, INC_BY FROM SYSTEM.POL__SEQ WHERE SEQ_NAME NOT LIKE 'POL_%'
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.DATABASE_PARAMETERS AS SELECT PARAMETER, VALUE FROM SYSTEM.POL__DATABASE_PARAMETERS
Does anything look amiss with this oldb_trc.txt file?
Allen

My user name does not show in finder

I recently had to do a re-install of OS X Yosemite on my brand new Macbook Pro due to some files being corrupt during the transfer of my aperture and iTunes librarys from my old iMac to the new Macbook. (Aperture appears to be the problem)
After the re-install everything appeared as a new computer. After signing in to my accounts, I went to "Finder" to open my username and music file to transfer my iTunes library over. My user name does not appear at all in the Finder sidebar. Have doing something wrong here.

You can customize your Finder sidebar to show whatever you want. Some of the defaults (including the home folder you're talking about) are available by going to Finder menu - Preferences - Sidebar. You can add others by dragging them from the right side of the Finder window into the sidebar.
Matt

SCSFileDownloadServlet fails: User 'guest' does not have sufficient priv.

Hi,
We have an ADF application that is using SCSFileDownloadServlet to get documents from UCM. We added the servlet in web.xml and we are using this link to download the documents: /getfile?adapterName=our_adapter_name&dDocName=document12345&dID=12345
The issue is that sometimes it works but sometimes it fails throwing this message in the logs:
Event generated by user 'guest' at host 'CIS'. Unable to download 'COR-ER-421722'. User 'guest' does not have sufficient privileges. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,guest,CIS!$!csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
intradoc.common.ServiceException: !csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
*ScriptStack GET_FILE
3:checkSecurity,dID=421317,dDocName=COR-ER-421722
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.ServiceSecurityImplementor.validateSecurityPrivilegeLevel(ServiceSecurityImplementor.java:813)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:170)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:121)
at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:371)
at intradoc.server.Service.checkSecurity(Service.java:2829)
at intradoc.server.FileService.checkSecurity(FileService.java:337)
at intradoc.server.Service.checkSecurity(Service.java:2807)
at sun.reflect.GeneratedMethodAccessor456.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Is it possible to set a user/password to this servlet so it is able to download the documents everytime?
Thanks,
Josue

Hi go9189,
According to your description, you come across the error that User 'guest' does not have permission to run DBCC checkprimaryfile. This issue could happen when the login account doesn't have CREATE DATABASE, CREATE ANY DATABASE,
or ALTER ANY DATABASE permission in SQL Server instance, or that the login account has no access to the mdf and ldf files when attaching database, so SQL Server recognize the login account as a "Guest".
To solve the issue, you could pay attention to the points below.
1. Ensure that the login account has at least CREATE DATABASE, CREATE ANY DATABASE, or ALTER ANY DATABASE permission. You could grant the fixed server role 'dbcreator' or 'sysadmin' to the login account following the steps below.
a. Connect to SQL Server instance with the login account which has sysadmin fix server role.
b. Expand the folder 'Security', right click the login, and select Properties.
c. In the Server Roles tab, check the checkbox for 'dbcreator' or 'sysadmin'.
2. Make sure that the the login account has full control permission on the mdf and ldf files. For how to grant the login account with full control permission on the mdf and ldf files, please refer to the steps in the following article:
http://msdn.microsoft.com/en-us/library/bb727008.aspx
There is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/e463df4c-8d26-46cf-aa2e-bddd97c7a9b8/user-guest-does-not-have-permission-to-run-dbcc-checkprimaryfile?forum=sqlgetstarted
Regards,
Michelle Li

Pcuigp.xssfpm.java.FPMRuntimeException: User J2EE_ADMIN does not exist

Hi colleagues,
We are getting the following error in Personal Information of ESS(Employee Self Service)
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User J2EE_ADMIN does not exist in this period
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:267)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:222)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:249)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:183)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:243)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverview.onInit(VcPerAddressUSOverview.java:302)
     at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverview.onInit(InternalVcPerAddressUSOverview.java:287)
     at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverviewInterface.onInit(VcPerAddressUSOverviewInterface.java:187)
     at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface.onInit(InternalVcPerAddressUSOverviewInterface.java:152)
     at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface$External.onInit(InternalVcPerAddressUSOverviewInterface.java:236)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
System configuration is EP7, Oracle database.
Could you please assist me to resolve this issue.
Thanks & regards,
Pavan.

Hi,
you have to map the EP user to an employee at the backend for the ESS services to work.
Go to transaction HRUSER and check whether an employee is connected to this USER_ID.
If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
Check the start DATE and the END date of the same PERNR of infotype 105 subtype 0001
This will solve the issue.

ESS Error - User id does not exist

Hi All,
When the user click on personal information - Emergency address link on the portal, user gets error "user XX does not exist in this period".
This proble is only for this particular user.
on the back end an abap dump with following error message is encountered.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
I checked the data is maintained in IT0105 an IT0002 correctly. Even the table V_T7XSSPERSUBTYP has value for IT0006 with correct usecase.
The user has a hiring date of 13.07.2009 and IT0105 also has the start date as 13.07.2009 can this be the reason? Since the validity is not for complete month?
Please advise what could be the possible reason for the above error. How to solve the problem
Regards,
Swati

Hi,
you have to map the EP user to an employee at the backend for the ESS services to work.
Go to transaction HRUSER and check whether an employee is connected to this USER_ID. If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
This will solve the issue.

LMS 4.1 user tracking does not pull ip address from hosts on switches

Similar Messages

Maybe you are looking for