LMS 4.2.2 Fault manager does not resolve hostname for some devices
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server.
The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
The problem may occur if the lookup was not possible when the device was added to fault management.
Faultmanager, unlike the rest of LMS, does not update the display name.
If the resolver.pl in /opt/CSCOpx/bin is able to get the device name, then resolution is fine.
The only workarrounds are to the delete the device from LMS and re-add it, or use cli tools on the server to remove and re-add the device from the DFM repository.
Cheers,
Michel
Similar Messages
-
please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?
See https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
Since you have a Intel Mac, if you can upgrade to OSX 10.5.x then you may be able to use more current releases.
jscher2000, You should link to http://www.mozilla.org/en-US/firefox/all-older.html for 3.6.28 since the ftp is not mirrored. -
Revision: 13128
Revision: 13128
Author: [email protected]
Date: 2009-12-21 13:46:32 -0800 (Mon, 21 Dec 2009)
Log Message:
Fix for ASDoc tooltips does not show ASDoc for some functions
QE notes: None.
Doc notes: None
Bugs: SDK-24751
Reviewed By:Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24751
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelGenerator.javaWelcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
width: 220px;
left: 180px; -
I need help concerning the CiscoWorks Daemon Manager that does not want to startup.
I keep on getting the Error 1053. I installed the CiscoWorks LMS 3.2 Evaluation.
I just need the CiscoWorks Daemon Manager started up. I know a solution was posted but the link is invalid.
This was the thread which I found:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cd47f8d/0#selected_message
Could somebody please assist me in this issue.
Thank You
IrvinTry the below:
1. Select Control Panel -> System and Maintenance -> System.
2. On the left pane, choose Advanced system settings.
3. Under Performance section, choose Settings.
4. Click the Advanced tab.
5. Under Virtual memory section, click Change.
6. Clear the "Automatically manage paging file size for all drives" checkbox.
7. Then Click Custom and specify at least 2048 MB for the min, and at least 4095 MB for the max.
8. Confirm the services are setup correctly. In Windows, go to Start and click on 'Run...'. Type in services.msc and make sure you have the
following services set like this, change accordingly if not:
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
10. Reboot after and see if this brings daemons up. -
LMS 4.2 discovery does not resolve hostname
Hi,
I'm trying automatic discovery with Ping on sweep module. I'm using the following configuration (you can also see it in the attached file):
discovery module - ping on sweep
global seed device - 192.168.6.35
preferred DCR display name - DNS resolvable hostname
The LMS server has its hostfile populated with the device ip/hostname that i'm testing with and resolving from the server works in both directions. Nevertheless, after discovery proccess is finished, the device is added in DCR with its IP address as dispaly name (screenshot in the attached file).
I've tried the same method in CiscoWorks 4.0.1 and it works fine.
I'm attaching the debug log files from discovery test. The LMS is running on Windows Server 2008 standard
Please advice,Hi,
I'm trying automatic discovery with Ping on sweep module. I'm using the following configuration (you can also see it in the attached file):
discovery module - ping on sweep
global seed device - 192.168.6.35
preferred DCR display name - DNS resolvable hostname
The LMS server has its hostfile populated with the device ip/hostname that i'm testing with and resolving from the server works in both directions. Nevertheless, after discovery proccess is finished, the device is added in DCR with its IP address as dispaly name (screenshot in the attached file).
I've tried the same method in CiscoWorks 4.0.1 and it works fine.
I'm attaching the debug log files from discovery test. The LMS is running on Windows Server 2008 standard
Please advice, -
Building package using makepkg does not resolve dependency for another
I am trying to install yaourt from the AUR. Yaourt required that package-query be installed, and this package further required another, etc.
In short, package-query required yajl, which I downloaded from the AUR. This package does not actually have a PKGBUILD, but rather un-tars into a file that you need to merge with /usr. After doing so I tried to make the package-query package but was still met with a dependency discrepancy. Luckily, yajl was available in the official repositories (same version). After using pacman to install it everything went fine and package-query built and installed fine.
When I went to build yaourt, using makepkg, it failed and informed that I was missing a dependency, package-query.
So, in short, is there a registry or something that keeps track of these installed packages? I imagine that when running makepkg there is a query against installed packages to see if you meet the dependency requirements. What can I do to build yaourt in this situation?
Last edited by sherrellbc (2014-06-08 18:37:19)cower doesn't have any dependencies that are not in the official repositories. It doesn't build packages automatically, but it will download the source tarballs and unpack them for you. It can also handle dependencies with the official repos and the AUR.
So for example, if you were to do cower -dd yaourt it would tell you that gettext, diffutils, and pacman are in the official repos. Then it would download the source tarball for package-query and resolve all of its dependencies. And it would download the yauort source tarball and unpack that for you. So it gives you an idea of what depends on what and in which order you should build and install.
But you really just shouldn't use yaourt. Many of the upgrade issues that arise on these forums stem from people using yaourt (particularly those who blindly run yaourt -Syua). The pacaur I mentioned above is a bash script that wraps cower. So it too should be able to be built and installed without having to resolve other AUR dependencies.
Edit:
But none of this is really answering the question though. When I make a package from the AUR, the dependency requirement when trying to install another package is never met. That is, if package A requires B and I then installed B (from the AUR), when I try to make A again it still informs me that B was never installed.
If this is the case, then you really don't know how to properly use the AUR, and thus should be reading up on that rather than trying to work around it with an AUR helper.
Last edited by WonderWoofy (2014-06-08 19:18:47) -
LMS 3.2 CiscoWorks Daemon Manager does not startup
When trying to start CiscoWorks Daemon Manager i get the following message:
"The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."
I have tring starting the service from DOS also and get:
E:\Program Files\CSCOpx\setup\support>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
resting the casuser pasword also did not help.
Anyone know of a solution?Hi
That was the initial problem, we did increase the swap file space and still get an error. See the errors on the 22nd..
Dec 22 07:20:33 127.0.0.1 dmgtd: Http is the port in ssl.properties file and apacheflags to be set is -d E:\PROGRA~1\CSCOpx\MDC\Apache
Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in registry http
Dec 22 07:20:33 127.0.0.1 dmgtd: Apache Args in registry -d E:\PROGRA~1\CSCOpx\MDC\Apache
Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in md.properties file is http
Dont know if this means anything to you :-) -
Patches not showing up for some devices
i installed the zcm agent on 5 devices at a remote site 2 days ago, and they registered fine with zcm etc, i can remote control them blah blah..however, when i click on the "patches" tab for any of these devices, all i see is "No items available." and i have everything checked off on the right side..anyone seen this or have a fix so i can patch these devices??
geeeerad,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router
Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
SamirHi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir -
Fault policy does not work when throwing remoteFault in bpel
Hi
I have a BPEL-proces in which I throw a remoteFault.
In the fault-policy there is a condition for this fault
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-java"/>
</condition>
</faultName>
But the fault-policy does not work if I throw this remoteFault in de bpel. But when I invoke another service (which is shutdown), then I get a remoteFault and for this remoteFault the fault-policy works well.
Any idea why the fault-policy does not work when I throw the remoteFault?
RegardsBPEL fault works only on invocation failures.
Fault management will work based on the remote fault from the remote service, you cannot throw remote fault from bpel and capture that in fault management and process.
The following are the actions that we can take on faults.
1. Human Intervention
2. Rethrow [rethrowFault]
3. Termination [abort]
4. Replay Fault [replayScope]
5. Custom Java Action [javaAction]
6. Retry [retry]
Hope this helps !!!
Thanks,
Vijay -
CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start
Dear,
After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.
From what we see this error seems to be a problem in the license.
Following is the error:
ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.
I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up
Thanks for help!Hi,
From the attached screen shots, I can see the startup type are Incorrect for Many services ,kindly correct their status...
please see below the correct startup type
configuration for LMS Services. As you notice you see that only the
"CiscoWorks Daemon Manager" (except the RSH/Syslog/TFTP services) is set to
start automatically, the Daemon Manager is responsible for starting all the
other CiscoWorks LMS services in a specific order.
So by having the below configuration, LMS will start correctly by itself
after Windows successfully reboots. In fact having any other start up
configuration will cause LMS to not start, because if one of the LMS
services starts before it dependent services, it will not come up and all
subsequent services will fail to start as well.
CiscoWorks ANI database engine - Manual (if Campus Manager installed)
CiscoWorks Daemon Manager - Automatic
CiscoWorks RME NG database engine - Manual (if RME installed)
CiscoWorks Tomcat Servlet Engine - Manual
CiscoWorks VisiBroker Smart Agent - Manual
CiscoWorks Web Server - Manual
CWCS Cmf database engine - Manual
CWCS rsh/rcp service - Automatic
CWCS syslog service - Automatic
CWCS tftp server - Automatic
If DFM installed:
DFM dfmEpm database engine - Manual
DFM dfmFh database engine - Manual
DFM dfmInv database engine - Manual
If IPM installed:
IPM Aging Server - Automatic
IPM DB Server - Automatic
IPM Naming Server - Automatic
IPM PM Server - Automatic
IPM Stopper - Automatic
--Change the statup type Accordingly and then REBOOT the Sever and check the issue again..
Thanks
Afroj -
Norton password manager does not work on 8. How do I return to a previous version?
when I updated to firefox 8, Norton password manager does not work. How can I return to a previous version. I am surprised that you introduced an update missing this.
Norton needs to be updated.
http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640 -
App-Manager does not connect to Firefox OS Simulator on Windows 7
OS: Windows 7
Firefox: 28
Firefox OS 1.2 Simulator 6.0pre8.20140112
When I start the Simulator it opens fine and I can see a Firefox OS Desktop
But the App Manager does not connect. The console at the right bottom just says:
...connecting to localhost:56455 (the port varies)
...connection timeout. Possible causes: didn't click on 'accept' (prompt).
...disconnecting
...disconnected
I disabled my firewall, restarted firefox and even the system - did not help
there is a similiar bug - but I am not sure if we are talking about the same:
https://support.mozilla.org/en-US/questions/988385
Thank youwell - I already knew these links and I can`t find anything helpful there
anyway, I tried the (unstable) Simulator for 1.3 instead of 1.2
this one works fine -
Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks! -
Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0Same issue. Doesn't see Dreamweaver.
Maybe you are looking for
-
Need Help existing Crystal 8.5 to Ver.11 Install and SmartViewerActiveX.asp
How to get my reports working, required Install onto Server? Version Changes to Code? Like other developers I am trying to reconfigure an existing solution / application that uses Crystal Reports 8.5 & RDC to call and display reports now moving to Cr
-
HT1349 how do i get music on a external hard drive to work with i tunes
Help please!!
-
Function Module to send Vendor Master Data from SRM to ECC
Hi Guys I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks
-
How do I add $$ to my iTunes ID account without adding a monthly automatic deposit?
-
I have been having this problem for few weeks I tried to unistall it and reinstall it still didn't work I also tried to delet the shortcut by draging it to Recyle bin and find the iTunes through the c drive and send the icon or even open it from ther