LMS 4.2.3 Continuous Authentication failure alarm in DFM

Hi All,
We are getting continuous minor alarm[Authentication Failure] for single router in the DFM. can we check from which ip we are getting the authentication request??
possible steps to find the cause for the authentication failure.?
Regards,
Channa

Hi Vinod,
I tried delete the DFM and DFM1.log files. but after stopping the deamon manager.unable to delete DFM1.log as this file was accessed by the smserver.exe in the backend.
i have successful moved both RPS files and DFM.log file from the location. but the issue persists.
I try again to delete DFM1.log file in the MW and update.
Regards,
Channa

Similar Messages

How to verify "security authentication failure rate" command

i type "security authentication failure rate 2 log" in global configuration mode,then login authentication failed many times but no the 15-second delay.
why?Thanks.

Steven,
This command did NOT come in play till 12.3.1
Command History
Release
Modification
12.3(1)
This command was introduced.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.3(7)T
The range of the threshold-rate value was changed from 1 through 1024 to 2 through 1024.
Usage Guidelines
The security authentication failure rate command provides enhanced security access to the router by generating syslog messages after the number of unsuccessful login attempts exceeds the configured threshold rate. This command ensures that there are not any continuous failures to access the router.
Regards,
Alex.
Please rate useful posts.

Authentication failure when attempting to pair mouse

For the last couple years I've had my Iogear Bluetooth mouse paired nicely with my Powerbook via a USB Bluetooth dongle (the built-in bluetooth doesn't work). Last week I paired my mouse with a friend's MacBook for several hours. When I tried to resume using the mouse with my own Powerbook, it was no longer paired, so I made a trip to Bluetooth Mouse Setup to initiate a new pairing. Unfortunately this no longer works; it finds the mouse successfully, but shortly after it reaches the "Pairing with your Bluetooth mouse" step, it displays a message in red lettering:
The pairing attempt was unsuccessful due to authentication failure. When ready, click Continue to try again.
I've retried the process many times during the last few evenings, but to no avail. Discoverable is turned on. I even reinstalled the Mac OS X 10.5.8 Combo update - still no go. Today I took my Bluetooth USB dongle and mouse to a Windows computer at work, and pairing worked just fine there, so I know it is not a hardware issue. Has anyone encountered this pairing error, and been able to resolve it?

I've been going crazy with this issue the last two days.
I had previously been using a Targus Bluetooth Mouse for Mac, but I have had to revert to an old Powerbook G4 as my main computer. I wanted to continue using my bluetooth mouse so after two tries I finally found a bluetooth dongle that the Mac recognizes. It seems to work like a charm, and is only annoying because of its bright green LED that blinks ceaselessly.
However I was most disappointed to find that when attempting to pair with my mouse, it recognized the mouse, connected, but then stalled out on the pairing process with the same red text message mentioned here.
I tried pairing with my old Palm m515 and that worked perfectly.
I booted up to a 10.4.11 install on an external drive and found the mouse to pair up and work perfectly.
Then I installed 10.5.4 on an external drive and it too connected perfectly. I tried creating a new user on my main drive's 10.5.8 install and that did not solve the problem. At this point I thought my main drive's 10.5.8 install was corrupt for some reason. I backed up my drive via Time Machine and proceeded the 6 hour new system fresh install.
My Leopard install disc is version 10.5.4. The mouse paired and worked great after the initial install. It was all for nought, however, because upon installing the 10.5.8 update on this untouched fresh system, the mouse was no longer recognized and would stall at the pairing process. I even got a kernel panic this time.
I don't know what Apple did between 10.5.4 and 10.5.8, but whatever it is made pairing with a bluetooth mouse via a Bluetooth dongle seemingly impossible. I assume there will be no fix for this since they have moved on to Snow Leopard.
Since people are having this same problem regardless of their dongle brand or mouse brand, I suppose I can be confident that this is not a hardware issue. Especially since the hardware all works perfectly up to at least 10.5.4. I'm not sure when it breaks because I just go straight from 10.5.4 to the 10.5.8 combo update.

PDP Authentication Failure

My partner and I both have an iPhone 5s on the Three network in the UK
Both phones are on iOS 8.03
We are currently in portugal and because Three do not currently allow minutes from the UK to be used in Portugal.
We both bought the europass data to use.
On landing both phones worked then 5 minutes after mine stopped and received Could Not Activate Data Network PDP Authentication Failure. My partners continued to work without any issues.
I've tried the numerous online fixes without success and also contacted my provider without a resolution.
We then tried my partners SIM card in my phone to check whether it was a sim or phone issue. Her sim failed in my phone and when she placed it back into her phone she then received the same PDP Authentication failure message.
It is therefore believed that it could be a software issue.
What are your thoughts Apple?
Thanks

This is almost ALWAYS a carrier problem. Settings aren't correct for your account, etc. However, there are a couple of things you can try, but if they don't work, you need to contact your carrier & have them check your account settings:
1. Remove the SIM card from your iPhone, then turn off your phone, wait are few seconds, turn your phone back on, then reinsert the sim card and wait a few seconds. See if this fixes the problem. If not:
2. Go to Settings -> General -> Reset -> Reset Network Settings on your phone to reset the network setting on the iPhone.

CUP 8.6.4 Calendar Presence integration - Authentication failure on server

Hi,
i have the following error from Presence Engine logs:
14:56:03.112 |system.pe.pa.owa.backend 1243662 ERROR -->EWSCalendarInfo::initiateRecovery: [email protected] POST 3 Authentication failure on server; Could not authenticate to server: ignoring empty Negotiate continuation, rejected Basic challenge
In Presence the Exchange SSL Connection/Certificate Verification is Ok. Where is the problem? Any suggestions?
Regards
Jason

I have now checked the Exchange logs:
From a working device which is unsing same impersonate account:
2012-09-05 00:00:04 192.168.100.10 POST /ews/exchange.asmx - 443 DOMAIN\Impersonateuser 192.168.50.34 ExchangeServicesClient/14.00.0650.007 200 0 0 234
And from Cisco Presence with the same impersonate account:
2012-09-05 15:01:12 192.168.100.10 POST /ews/exchange.asmx - 443 - 192.168.90.100 - 401 1 2148074242 39
It seems cisco cup could not use the impersonate user account, its missing. But i have tried different formats in CUPs gateway options:
DOMAIN\Impersonateuser
DOMAIN.LOCAL\Impersonate-user
Impersonate-user@domain
Impersonate-user
Any suggestions?
Jason

DFM - Authentication Failure Alert

I am receiving alerts in DFM for "Authentication Failure" on a device that I am monitoring with DFM. The only info I can find about the alert is the name of the alert and the type of alarm. In this case, a "minor alarm". I would like to know what is device is causing the failure as it involves my network core switch. Does anyone have any ideas on how to find out what is causing this alarm?

Some devices may send the generic SNMPv2 authentication failure trap without any varbinds, but most Cisco devices send a version that includes the address of the host that did the poll.
If the varbind is missing from the trap, then you would need to move your sniffer closer to the device to find out who is doing the polling (i.e. capture the offending SNMP request packet). Alternatively, if this is an IOS device, you can use "debug snmp packet" to get see who is polling the device.

Intermittent AD Authentication failures in ISE 1.2

Starting today I was getting intermittent authentication failures in ISE. It would say that the user was not found in the selected identity store. The account is there though. At one point I ran a authetication test from the external identity source menu and I got a failure and then the next time a pass. I have no idea why this is happening. I just updated to ISE 1.2 the other day. I'm also seeing what looks like a high level of latency on both of my PSN's. Is this normal? Any ideas?
Thanks
Jef

Interesting. I have one location that is not having this problem at all. The other is having it somewhat frequently. The PSN's for each location are tied to the local AD servers. I have not had this until we started getting 300-380 PC's connecting. We are a school so we are slowly getting started. It's real random. One user will work then another time they won't. Happens with admin and user. I have notices that with this new version of ISE it is complaining that it is getting accounting updates from the NAS too often, but I have not looked into this because I just installed 1.2 about 3-4 days ago and haven't had time to look into it.
When you say Multicast to you AD...how did you check that? We do use multicast.

After Effects can't continue: unexpected failure during application startup

Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
System log:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
            Call location:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
Mylenium

HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and now im getting the error message as "PDP authentication failure" Im using Aircel carrier.

HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
Please let me know how to fix this issue

update...
I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
Frustrated.

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

The test couldn't sign in to Outlook Web App due to an authentication failure. Extest_ account.

Hi.
I'm using SCOM 2012 R2 and have imported the Exchange server 2010 MP.
I have runned the TestCasConnectivityUser.ps1 script and almost everything is okay except for the OWA test login.
The OWA rule is working for some time until (I think) SCOM is doing a automatic password reset of the extest_ account. Then I get the OWA error below. The other test connectivity are working. Any suggestions.
One or more of the Outlook Web App connectivity tests had warnings. Detailed information:
Target: xxx|xxx
Error: The test couldn't sign in to Outlook Web App due to an authentication failure.
URL: https://xxx.com/OWA/
Mailbox: xxxx
User: extest_xxx
Details:
[22:50:08.936] : The TrustAnySSLCertificate flag was specified, so any certificate will be trusted.
[22:50:08.936] : Sending the HTTP GET logon request without credentials for authentication type verification.
[22:50:09.154] : The HTTP request succeeded with result code 200 (OK).
[22:50:09.154] : The sign-in page is from ISA Server, not Outlook Web App.
[22:50:09.154] : The server reported that it supports authentication method FBA.
[22:50:09.154] : This virtual directory URL type is External or Unknown, so the authentication type won't be checked.
[22:50:09.154] : Trying to sign in with method 'Fba'.
[22:50:09.154] : Sending HTTP request for logon page 'https://xxx.com/CookieAuth.dll?Logon'.
[22:50:09.154] : The HTTP request succeeded with result code 200 (OK).
[22:50:09.373] : The test couldn't sign in to Outlook Web App due to an authentication failure.
URL: https://xxx.com/OWA/
Mailbox: xxx
User: extest_xxx
[22:50:09.373] : Test failed for URL 'https://xxx/OWA/'.
Authentication Method: FBA
Mailbox Server: xxx
Client Access Server Name: xxx
Scenario: Logon
Scenario Description: Sign in to Outlook Web App and verify the response page.
User Name: extest_xxx
Performance Counter Name: Logon Latency
Result: Skipped
Site: xxx
Latency: -00:00:00.0010000
Secure Access: True
ConnectionType: Plaintext
Port: 0
Latency (ms): -1
Virtual Directory Name: owa (Default Web Site)
URL: https://xxx.com/OWA/
URL Type: External
Error:
The test couldn't sign in to Outlook Web App due to an authentication failure.
URL: https://xxx.com/OWA/
Mailbox: xxx
User: extest_xxx
Diagnostic command: "Test-OwaConnectivity -TestType:External -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true"
EventSourceName: MSExchange Monitoring OWAConnectivity External
Knowledge:
http://go.microsoft.com/fwlink/?LinkID=67336&id=CB86B85A-AF81-43FC-9B07-3C6FC00D3D42
Computer: xxx
Impacted Entities (3):
OWA Service - xxx, xxx - xxx, Exchange
Knowledge: View additional knowledge...
External Knowledge Sources
For more information, see the respective topic at the Microsoft Exchange Server TechCenter
Thanks
MHem

Hi,
Based on the error, it looks like an OWA authentication failure.
Have you tried post this to LYNC forums?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ISE internal user authentication failure - user not found

Hi Forumers'
I trying to do wireless 802.1x, where identity store using intenral user.
But i found this error message when i trying to connect
Authentication failed :
22056 Subject not found in the applicable identity store(s)
My authrorization rules is built like this
identity groups = user identities group / " mygroup"
condition = no setting
permissions = standard / PermitAccess
Question 1
Any troubleshooting step to do on this?
Question 2
For the Authorization rules, what's the condition should set for using Internal User as Identity store?
Thanks
Noel

The error is caused to an authentication failure and is not an issue with authorization
You need to look at your authentications policy (Policy->Authentications) and see which identity store was authenticated against
In addition can do the Live Authentications page (Monitor->Authentications) and for the failing record click on the icon under details. This will give you the full details of the requets processing and you can see which rule was matched in the identity policy (Identity Policy Matched Rule) and "Selected Identity Stores".

[SOLVED] Authentication failure while try to login in GDM

Hi,
I just installed Arch Linux 64 bit on Virtualbox (I using GNOME and GDM). I have set on rc.conf daemon arrays to start dbus and gdm and it run well.
My problem is I can't login using root. When I try to login, it prompt Authentication failure
I can't re-configure my rc.conf because I can't login, and I stuck in GDM screen..
When I try to use "Ctrl+Alt+F1", it effects to my host (ubuntu), not to my guest Arch
How to skip GDM to started for this condition and how to solve this authentication failure ?
Last edited by alphazero (2011-11-20 11:51:19)

Since I run on virtualbox. I can't use Ctrl-F1, so I try to edit rc.conf using LiveCD
After I modify rc.conf and remove gdm in daemon array, I reboot and login as root.. adduser and finally it works login as user
And I add again gdm after it worked to log as user.
So problem solved.. Thanks to wonder for your help.
Last edited by alphazero (2011-11-20 11:50:54)

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.

Go URL - User Authentication Failure

Hi,
I am trying to use a 'Go URL' in web application and I see some issue with authentication mechanism.
I was able to login and view the dashboard whenever the username used in the 'Go URL' is from the console. But if the user who is from Active directory is used in the 'Go URL' link, then I get the login page saying 'Invalid username or password'. When I check the log file, it says ' [53012] User Authentication Failure'.
Also the AD user can login from the login page, but not thru 'Go-URL' link.
Can anyone let me know whether I am missing any step?
Thanks

969211 wrote:
I was able to login and view the dashboard whenever the username used in the 'Go URL' is from the console. But if the user who is from Active directory is used in the 'Go URL' link, then I get the login page saying 'Invalid username or password'. When I check the log file, it says ' [53012] User Authentication Failure'.
Also the AD user can login from the login page, but not thru 'Go-URL' link.
Can anyone let me know whether I am missing any step?Check the usage of Go URL first : http://docs.oracle.com/cd/E21043_01/bi.1111/e16364/apiwebintegrate.htm
If you dont user NQUser and NQPassword then they will be prompted for a password. you need to http://<hostname.domain>:9704/analytics/saw.dll?Dashboard&PortalPath=<your GO URLpath>*&NQuser=USERNAME&NQPassword=PASSWORD*
You should not access if URL without logging in.
Also on different note:
Rupesh Shelar wrote:
Make sure your BISYSTEM password
Go to weblogic console, http://IP address:7001/console
Home >Summary of Security Realms > myrealm > Users and Groups > BISystemUser
And then go to your EM (http://IP address:7001/em)
expand weblogic domain > bifoundation_domain > Security > Credentials > oracle.bi.system ? system.user
Just retype a new password then Restart BI All Services then test it.How is BISystemUser even related to Go URL .or this issue .?
Hope this helps.
Let me know the updates. Mark if it answers!
Thanks,
SVS

LMS 4.2.3 Continuous Authentication failure alarm in DFM

Similar Messages

Maybe you are looking for